Synthesis and functionalization of dendron‐polymer conjugate based hydrogels via sequential thiol‐ene “click” reactions

Fabrication and functionalization of hydrogels from well‐defined dendron‐polymer‐dendron conjugates is accomplished using sequential radical thiol‐ene “click” reactions. The dendron‐polymer conjugates were synthesized using an azide‐alkyne “click” reaction of alkene‐containing polyester dendrons bearing an alkyne group at their focal point with linear poly(ethylene glycol)‐bisazides. Thiol‐ene “click” reaction was used for crosslinking these alkene functionalized dendron‐polymer conjugates using a tetrathiol‐based crosslinker to provide clear and transparent hydrogels. Hydrogels with residual alkene groups at crosslinking sites were obtained by tuning the alkene‐thiol stoichiometry. The residual alkene groups allow efficient postfunctionalization of these hydrogel matrices with thiol‐containing molecules via a subsequent radical thiol‐ene reaction. The photochemical nature of radical thiol‐ene reaction was exploited to fabricate micropatterned hydrogels. Tunability of functionalization of these hydrogels, by varying dendron generation and polymer chain length was demonstrated by conjugation of a thiol‐containing fluorescent dye. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 926–934     

Amphiphilic block copolymer self‐assemblies of poly(NVP)‐b‐poly(MDO‐co‐vinyl esters): Tunable dimensions and functionalities

Functional, degradable polymers were synthesized via the copolymerization of vinyl acetate (VAc) and 2‐methylene‐1,3‐dioxepane (MDO) using a macro‐xanthate CTA, poly(N‐vinylpyrrolidone), resulting in the formation of amphiphilic block copolymers of poly(NVP)‐b‐poly(MDO‐co‐VAc). The behavior of the block copolymers in water was investigated and resulted in the formation of self‐assembled nanoparticles containing a hydrophobic core and a hydrophilic corona. The size of the resultant nanoparticles was able to be tuned with variation of the hydrophilic and hydrophobic segments of the core and corona by changing the incorporation of the macro‐CTA as well as the monomer composition in the copolymers, as observed by Dynamic Light Scattering, Static Light Scattering, and Transmission Electron Microscopy analyses. The concept was further applied to a VAc derivative monomer, vinyl bromobutanoate, to incorporate further functionalities such as fluorescent dithiomaleimide groups throughout the polymer backbone using azidation and “click” chemistry as postpolymerization tools to create fluorescently labeled nanoparticles. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2699–2710     

Behavior of a bisphenol‐A‐based polybenzoxazine exposed to ultraviolet radiation

An interaction mechanism for a bisphenol‐A‐based polybenzoxazine resin exposed to ultraviolet radiation is proposed. Fourier transform infrared spectroscopy indicated that a carbonyl‐containing species was formed when cured 6,6′‐bis(2,3‐dihydro‐3‐methyl‐4H‐1,3‐benzoxazinyl)isopropylidene (BA‐m) resin was exposed to ultraviolet radiation (λ > 290 nm) in the presence of ambient air at room temperature. The isopropylidene linkage was the reactive site of cleavage and oxidation. It was apparent from model compound studies that this structure was severed, resulting in the formation of a 2,6‐disubstituted benzoquinone. Model compound studies also demonstrated that the BA‐m polymer backbone structure, the Mannich bridge, which was present in and characterized all the polybenzoxazines, neither cleaved nor oxidized in the presence of ultraviolet radiation in a detectable manner under the conditions of this study. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 2687–2701, 2000     

Star polymers by photoinduced copper‐catalyzed azide–alkyne cycloaddition click chemistry

Well‐defined star polymers consisting of tri‐, tetra‐, or octa‐arms have been prepared via coupling‐onto strategy using photoinduced copper(I)‐catalyzed 1,3‐dipolar cycloaddition click reaction. An azide end‐functionalized polystyrene and poly(methyl methacrylate), and an alkyne end‐functionalized poly(ε‐caprolactone) as the integrating arms of the star polymers are prepared by the combination of controlled polymerization and nucleophilic substitution reactions; whereas, multifunctional cores containing either azide or alkyne functionalities were synthesized in quantitatively via etherification and ring‐opening reactions. By using photoinduced copper‐catalyzed azide–alkyne cycloaddition (CuAAC) click reaction, reactive linear polymers are simply attached onto multifunctional cores to form corresponding star polymers via coupling‐onto methodology. The chromatographic, spectroscopic, and thermal analyses have clearly demonstrated that successful star formations can be obtained via photoinduced CuAAC click reaction. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1687–1695     

Facile one‐pot/one‐step technique for preparation of side‐chain functionalized polymers: Combination of SET‐RAFT polymerization of azide vinyl monomer and click chemistry

An azido‐containing functional monomer, 11‐azido‐undecanoyl methacrylate, was successfully polymerized via ambient temperature single electron transfer initiation and propagation through the reversible addition–fragmentation chain transfer (SET‐RAFT) method. The polymerization behavior possessed the characteristics of “living”/controlled radical polymerization. The kinetic plot was first order, and the molecular weight of the polymer increased linearly with the monomer conversion while keeping the relatively narrow molecular weight distribution (M_w/M_n ≤ 1.22). The complete retention of azido group of the resulting polymer was confirmed by ¹H NMR and FTIR analysis. Retention of chain functionality was confirmed by chain extension with methyl methacrylate to yield a diblock copolymer. Furthermore, the side‐chain functionalized polymer could be prepared by one‐pot/one‐step technique, which is combination of SET‐RAFT and “click chemistry” methods. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Healable network polymers bearing flexible poly(lauryl methacrylate) chains via thermo‐reversible furan‐maleimide diels–alder reaction

A new ATRP initiator containing two furyl rings, namely, bis(furan‐2‐ylmethyl) 2‐bromopentanedioate was synthesized starting from commercially available l ‐glutamic acid as a precursor. Well‐defined bisfuryl‐terminated poly(lauryl methacrylate) macromonomers with molecular weight and dispersity in the range 5000–12,000 g mol^?1 and 1.30–1.37, respectively, were synthesized employing the initiator by atom transfer radical polymerization (ATRP). Independently, 1,1′,1″‐(nitrilotris(ethane‐2,1‐diyl))tris(1H‐pyrrole‐2,5‐dione) was synthesized as a tris‐maleimide counterpart for furan‐maleimide click reaction. Thermo‐reversible network polymer bearing flexible poly(lauryl methacrylate; (PLMA) chains was obtained by furan‐maleimide Diels–Alder click reaction of bisfuryl‐terminated PLMA with 1,1′,1″‐(nitrilotris(ethane‐2,1‐diyl))tris(1H‐pyrrole‐2,5‐dione). The prepared network polymer showed retro‐Diels–Alder reaction in the temperature range 110–170 °C as determined from DSC analysis. The presence of low Tg (–40 °C) PLMA chains induced chain mobility to the network structure which led to the complete scratch healing of the coating at 60 °C in five days due to furan‐maleimide adduct formation. The storage modulus of the network polymer was found to be 3.7 × 10⁴ Pa at the constant angular frequency of 5 rad/sec and strain of 0.5%. The regular reversal of storage (G ′) and loss modulus (G ″) was observed with repeated heating (40 to 110 °C) and cooling cycles (110 to 40 °C) at constant angular frequency and strain. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 2700–2712     

Synthesis and self‐assembly of thermoresponsive block‐graft fluoropolymer as well as its tunable wettability surface

Thermo‐responsive block‐graft fluoropolymer is synthesized and investigated the self‐assembly morphology and the tunable wettability surface on cotton fabric by dip‐coating into the micelles with different temperatures. Well‐defined block‐graft copolymer is prepared by click chemistry with poly(hexafluorobutyl methacrylate)‐block‐poly(glycidyl methacrylate) (PHFBMA‐b‐PGMA) and homopolymer poly(N‐isopropylacrylate) with alkyne on main chain (Alkynyl‐PNIPAM) to synthesize final block‐graft polymer PHFBMA‐b‐(PGMA‐g‐PNIPAM). The thermo‐responsive behaviors of block‐graft polymer prove that the diameter for fluoropolymer micelle is about 50–70 nm with uniform sphere shape at room temperature and bigger and broader at 40 °C. The surface of cotton fabric processed in micelle solution at room temperature is smooth and has good hydrophobic property, while it has the hydrophilic property dipped in high temperature micelle solution. This work may give valuable guidance for fabricating a facile strategy to establish controllable wettability surfaces on different substrates, which is a promising candidate for the coating materials and industrial fields. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 992–1002     

Hybrid polystyrene based electrospun fibers with spin‐crossover properties

We have succeeded in the preparation of electrospun fibers of polystyrene incorporating a metallo‐organic polymer of [Fe (II) (4‐octadecyl‐1,2,4‐triazole)₃(ClO₄)₂]n. The obtained fibers have diameters in the range 2–4 µm and show the characteristic spin‐crossover transition associated with the metallo‐organic polymer. The structure of both, polystyrene and the metallo‐organic polymer, in the fibers was also studied. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 814–821     

Synthesis of dual‐functional poly(6‐azidohexylmethacrylate) brushes by a RAFT agent carrying carboxylic acid end groups

Novel types of dual‐functional surface‐attached polymer brushes were developed by interface‐mediated reversible addition‐fragmentation chain transfer (RAFT) polymerization of 6‐azidohexylmethacrylate using the surface‐immobilized RAFT agent and the free initiator. The interface‐mediated RAFT polymerization produced silicon substrate coated with dual‐functional (azido groups from monomer and carboxylic acid groups from RAFT agent) poly(6‐azidohexylmethacrylate) [poly (AHMA)] with a grafting density as high as 0.59 chains/nm². Dual‐functional polymer brushes can represent an attractive chemical platform to deliberately introduce other molecular units at specific sites. The azido groups of the poly(AHMA) brushes can be modified with alkyl groups via click reaction, known for their DNA hybridization, while the carboxylic acid end groups can be reacted with amine groups via amide reaction, known for their antifouling properties. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1696–1706     

Ring opening metathesis polymerization (ROMP) and thio‐bromo “click” chemistry approach toward the preparation of flame‐retardant polymers

This contribution describes our recent efforts geared toward the use of a general, thio‐bromo “click” reaction as a post‐polymerization method for the preparation of flame‐resistant polymeric materials. α‐bromo ester‐containing polymers could easily be prepared using ROMP and a subsequent, facile thio‐bromo click reaction was used for the installation of a phosphorus‐moiety that was shown to impart flame‐resistant/self‐extinguishing properties to these polymers. The extent of their flame resistance was then ascertained by treating paper (previously coated with polymer) to standard burn tests as well as measuring the limiting oxygen index (LOI). © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 645–652     

pH‐ and β‐cyclodextrin‐responsive micelles based on polyaspartamide derivatives as drug carrier

A novel kind of graft polymer poly(aspartic acid)‐ethanediamine‐g‐adamantane/methyloxy polyethylene glycol (Pasp‐EDA‐g‐Ad/mPEG) was designed and synthesized for drug delivery in this study. The chemical structure of the prepared polymer was confirmed by proton NMR. The obtained polymer can self‐assemble into micelles which were stable under a physiological environment and displayed pH‐ and β‐cyclodextrin (β‐CD)‐responsive behaviors because of the acid‐labile benzoic imine linkage and hydrophobic adamantine groups in the side chains of the polymer. The doxorubicin (Dox)‐loaded micelles showed a slow release under physiological conditions and a rapid release after exposure to weakly acidic or β‐CD environment. The in vitro cytotoxicity results suggested that the polymer was good at biocompatibility and could remain Dox biologically active. Hence, the Pasp‐EDA‐g‐Ad/mPEG micelles may be applied as promising controlled drug delivery system for hydrophobic antitumor drugs. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1387–1395     

Versatile functionalization of aromatic polysulfones via thiol‐ene click chemistry

A facile, efficient approach for preparation of functionalized aromatic polysulfones by postpolymerization modification with thiol‐ene click chemistry is described. The key synthetic strategy is to incorporate a pendant vinyl ether group into polysulfones as a reactive precursor with controlled degrees of functionalization. Synthetic utility of the pendant alkenyl group is demonstrated by generating diverse polymer derivatives using thiol‐ene functionalization including glycosylated polysulfone. The highly reactive alkene platform in the polymer affords convenient, metal‐free, and azide‐free click transformations to create diverse ranges of new functionalized polysulfones that could be applied in various applications. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3237–3243     

Synthesis of polycarbosilanes having sugar‐derived structures as novel materials for cell cultivation

Polycarbosilanes with or without sugar‐derived structures in the polymer side chains were synthesized and their application to materials for cell cultivation was investigated. Polysilacyclobutanes having glucose‐derived moieties or N‐acetylglucosamine‐derived moieties (polyBMSB‐glucose and polyBMSB‐AGA) were synthesized by ene‐thiol reaction between precursor poly(1‐(3‐butenyl)?1‐methylsilacyclubane) (polyBMSB) and tetraacetylglucose or tetraacetylglucosamine having a thiol group at the anomeric position and the successive deprotection of the acetyl groups gave polycarbosilanes with sugar‐derived structures in the side chains. Poly(1‐(3‐hydroxybutyl)‐1‐methylsilacyclobutane) was synthesized by hydroboration/oxidation of the precursor polyBMSB. The cell cultivation efficiency using the polymers with or without sugar moieties was evaluated by cultivation of WRL cells on the polystyrene dishes coated with the polymers. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2267–2272     

Antibacterial poly(ethylene glycol) hydrogels from combined epoxy‐amine and thiol‐ene click reaction

Antibacterial hydrogels containing quaternary ammonium (QA) groups were prepared via a facile thiol‐ene “click” reaction using multifunctional poly(ethylene glycol) (PEG). The multifunctional PEG polymers were prepared by an epoxy‐amine ring opening reaction. The chemical and physical properties of the hydrogels could be tuned with different crosslinking structures and crosslinking densities. The antibacterial hydrogel structures prepared from PEG Pendant QA were less well‐defined than those from PEG Chain‐End QA. Furthermore, functionalization of the PEG‐type hydrogels with QA groups produced strong antibacterial abilities against Staphylococcus aureus, and therefore has the potential to be used as an anti‐infective material for biomedical devices. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 656–667     

Novel positive‐working and aqueous‐base‐developable photosensitive poly(imide benzoxazole) precursor

A novel positive‐working and aqueous‐base‐developable photosensitive poly(imide benzoxazole) precursor based on a poly(amic acid hydroxyamide) bearing phenolic hydroxyl groups and carboxylic acid groups, a diazonaphthoquinone (DNQ) photosensitive compound, and a solvent was developed. Poly(amic acid hydroxyamide) was prepared through the polymerization of 2,2‐bis(3‐amino‐4‐hydroxyphenyl)hexafluoropropane, trimellitic anhydride chloride, and 4,4′‐oxydibenzoyl chloride. Subsequently, the thermal cyclization of the poly(amic acid hydroxyamide) precursor at 350 °C produced the corresponding poly(imide benzoxazole). The inherent viscosity of the precursor polymer was 0.17 dL/g. The cyclized poly(imide benzoxazole) showed a high glass‐transition temperature of 372 °C and 5% weight loss temperatures of 535 °C in nitrogen and 509 °C in air. The structures of the precursor polymer and the fully cyclized polymer were characterized with Fourier transform infrared and ¹H NMR. The photosensitive polyimide precursor containing 25 wt % DNQ photoactive compound showed a sensitivity of 256 mJ/cm² and a contrast of 1.14 in a 3‐μm film with a 0.6 wt % tetramethylammonium hydroxide developer. A pattern with a resolution of 5 μm was obtained from this composition. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5990–5998, 2004     

Synthesis and characterization of sulfone containing main chain oligobenzoxazine precursors

The preparation of soluble and processable polybenzoxazine precursors capable of forming high performance networks is an important field of research with a broad spectrum of application. This study demonstrates an approach that utilizes aromatic sulfonediamine, bisphenol‐A, and formaldehyde in Mannich‐type polycondesation to prepare polybenzoxazine precursor. The structure of the oligomeric precursor (M_n = 2600) was confirmed by FTIR and ¹H NMR spectral analysis. The precursor contained both sulfone and benzoxazine ring structures in the backbone. It was shown that small amount of ring‐opened phenolic groups were also present. Thermally activated self‐curing behavior of precursor in the absence of catalyst was studied by differential scanning calorimetry. Thermal properties of the cured polymers were also investigated by thermo gravimetric analysis. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Tadpole‐shaped amphiphilic copolymers prepared via RAFT polymerization and click reaction

The tadpole‐shaped amphiphilic copolymers with cyclic polystyrene as the head and a linear poly(N‐isopropylacrylamide) as the tail have been successfully synthesized by combination of reversible addition‐fragmentation chain transfer (RAFT) polymerization and “click” reaction. The synthesis involves two main steps: (1) preparation of a linear acetylene‐terminated PNIPAAM‐b‐PS with a side azido group anchored at the junction between two blocks; (2) intramolecular cyclization reaction to produce the cyclic PS block using “click” chemistry under high dilution. The structures, molecular weights, and molecular weight distributions of the resulted intermediates and the target polymers were characterized by their ¹H NMR, FTIR, and gel permeation chromatography. The difference of surface property between tadpole‐shaped polymer and its linear precursor was observed, and the water contact angles on the former surface are larger than that of the latter surface. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2390–2401, 2008     

UV‐responsive degradable polymers derived from 1‐(4‐aminophenyl) ethane‐1,2‐diol

A UV‐responsive polymer was prepared via condensation polymerization of 2‐nitrobenzyl(4‐(1,2‐dihydroxyethyl)phenyl)carbamate and azalaic acid dichloride. When the polymer was irradiated with UV light, the nitrobenzyl urethane protecting group was removed and the deprotected aniline underwent spontaneous 1,6‐elimination reactions, resulting in degradation of the polymer. Nanoparticles with encapsulated Nile Red were formulated with the degradable polymer and triggered burst release of Nile Red was observed when the nanoparticles were irradiated by UV light. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1161–1168     

Quadruple click reactions for the synthesis of cysteine‐terminated linear multiblock copolymers

Synthesis of cysteine‐terminated linear polystyrene (PS)‐b‐poly(ε‐caprolactone) (PCL)‐b‐poly(methyl methacrylate) (PMMA)/or poly(tert‐butyl acrylate)(PtBA)‐b‐poly(ethylene glycol) (PEG) copolymers was carried out using sequential quadruple click reactions including thiol‐ene, copper‐catalyzed azide–alkyne cycloaddition (CuAAC), Diels–Alder, and nitroxide radical coupling (NRC) reactions. N‐acetyl‐L ‐cysteine methyl ester was first clicked with α‐allyl‐ω‐azide‐terminated PS via thiol‐ene reaction to create α‐cysteine‐ω‐azide‐terminated PS. Subsequent CuAAC reaction with PCL, followed by the introduction of the PMMA/or PtBA and PEG blocks via Diels–Alder and NRC, respectively, yielded final cysteine‐terminated multiblock copolymers. By ¹H NMR spectroscopy, the DP_ns of the blocks in the final multiblock copolymers were found to be close to those of the related polymer precursors, indicating that highly efficient click reactions occurred for polymer–polymer coupling. Successful quadruple click reactions were also confirmed by gel permeation chromatography. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Luminescent Polymer Consisting of 9,12‐Linked o‐Carborane

The synthesis of novel luminescent polymer containing p‐phenylene‐ethynylene and 9,12‐linked o‐carborane units alternately in the main chain is reported. The obtained polymer exhibits intense blue photoluminescence, providing the first insights into the optical properties of a 9,12‐disubstituted o‐carborane dye.  π‐Conjugated substituent at 9 and/or 12‐positions in o‐carborane is electrically independent, and both the HOMO and the LUMO levels slightly increase, whereas LUMO of the π‐conjugated substituent at 1 and/or 2‐positions in o‐carborane decrease.  Thus, it is deduced that polymers consisting of the 9,12‐linked o‐carborane unit are able to be applied as light‐emitting materials.