Investigation of the acid‐catalyzed hydrolysis and reaction mechanisms of N,N′‐diarylsulfamides using various criteria

The mechanism of acid‐catalyzed hydrolysis of a series of p‐substituted N,N′‐diarylsulfamides was investigated in aqueous mineral acid solutions. Rate profiles, reaction activation parameters, catalytic order of strong acids, solvent isotope effects, and analysis of the kinetic data by the excess acidity method suggest a change in the mechanism from A2 to A1. While the hydrolysis proceeds with an A2 mechanism in low acidity regions, an A1 mechanism takes place in high acid concentrations. Copyright © 2013 John Wiley & Sons, Ltd.     

Kinetics and mechanism for acid‐catalyzed disproportionation of 2,2,6,6‐tetramethylpiperidine‐1‐oxyl

Disproportionation of cyclic nitroxyl radicals (NRs) in acid solutions is of key importance for the chemistry of these compounds. Meanwhile, the data reported on the mechanism of this reaction in dilute acids are inconsistent with those on the stability of NRs in concentrated acids. Here we have examined the kinetics and stoichiometry for the disproportionation of 2,2,6,6‐tetramethylpiperidine‐1‐oxyl ( 1 ) in aqueous H₂SO₄ (1.0–99.3 wt%) and found that (1) the disproportionation of 1 proceeds by the same mechanism over the entire range of acid concentrations, (2) the effective rate constant of the process exhibits a bell‐shaped dependence on the excess acidity function X peaked at X = ?pK _1H+ = 5.8 ± 0.3, (3) a key step of the process involves the oxidation of 1 with its protonated counterpart 1H ⁺ yielding oxopiperidinium cation 2 and hydroxypiperidine 3 at a rate constant of (1.4 ± 0.8) × 10⁵ M^?1 · s^?1, and (4) the reaction is reversible and, upon neutralization of acid, disproportionation products 2 and 3H ⁺ comproportionate to starting 1 . In highly acidic media, the protonated form 1H ⁺ is relatively stable due to a low disproportionation rate. Based on the known and newly obtained values of equilibrium constants, both the standard redox potential for the 1H ⁺ / 3 pair (955 ± 15 mV) and the pH‐dependences have been calculated for the reduction potentials of 1 and 2 to hydroxylamine 3 that is in equilibrium with its protonated 3H ⁺ and deprotonated 3 ^? forms. The data obtained provide a deeper insight into the mechanism of nitroxyl‐involving reactions in chemical and biological systems. Copyright © 2008 John Wiley & Sons, Ltd.     

DFT studies on the mechanism of Pd(II)‐catalyzed intermolecular 1,2‐diamination of conjugated dienes

The reaction mechanism of the palladium(II)‐catalyzed addition of urea to dienes to form 1,2‐diamine was studied using the B3LYP density functional theory (DFT) method. The results indicate that the first C? N σ‐bond formation is the rate‐determining step, and that the covalent bonds are formed favorably by the terminal carbon atoms of dienes and nitrogen atom. The Pd(NCMe)‐catalyst may significantly lower the energy barrier of the rate‐determining step from the nonligand Pd(II)‐catalyst counterpart. The results are in strong support of a recent experiment. Copyright © 2008 John Wiley & Sons, Ltd.     

Gas‐phase elimination kinetics of selected aliphatic α,β‐unsaturated aldehydes catalyzed by hydrogen chloride

The gas‐phase elimination of 2‐methyl‐2‐propenal catalyzed by HCl yields propene and CO gas, while E‐2‐pentenal with the same catalyst gives butene and CO gas. The kinetics determinations were carried out in a static system with the reaction vessels deactivated with allyl bromide and the presence of the free radical inhibitor toluene. Temperature and pressure ranges were 350.0–410.0 °C and 34–76 Torr. The elimination reactions are homogeneous and unimolecular, and follow a first‐order rate law. The rate coefficients for the reactions are expressible by the following Arrhenius equations: Data from the kinetic and thermodynamic parameters of these catalyzed elimination reactions implies a mechanism of a concerted five‐membered cyclic transition state structure for the formation of the corresponding olefin and carbon monoxide. Copyright © 2015 John Wiley & Sons, Ltd.     

Crystal structures of 3‐methyl‐2(1H)‐quinoxalinone and three substituted derivatives

3‐Methyl‐2(1H)‐quinoxalinone and three derivatives (3,7‐dimethyl‐2(1H)‐quinoxalinone, 3‐methyl‐6,7‐dichloro‐2(1H)‐quinoxalinone and 3‐methyl‐7‐nitro‐2(1H)‐quinoxalinone) have been synthesised and analysed by ¹H NMR and IR spectral spectroscopies. The crystal structures have been determined at room temperature from X‐ray single crystal diffraction data for three of them and from powder diffraction data for the nitro derivative. 3‐Methyl‐2(1H)‐quinoxalinone crystallises in the P2₁/c monoclinic system, 3,7‐dimethyl‐2(1H)‐quinoxalinone in the Pbca orthorhombic system and the two others compounds in the P$\overline {1} $ triclinic system. For the nitro derivative, C? H$\cdots $ N short contacts are established between the carbon of the methyl and the double bounded nitrogen of the ring. For the three other compounds N? H$\cdots $ O hydrogen bonds involve the atoms of the heterocyclic ring. Copyright © 2011 John Wiley & Sons, Ltd.     

Theoretical studies of cobalt(I)‐catalyzed hydroacylation of vinylsilanes and alkyl aldehydes

Density functional theory (DFT) was used to investigate computationally cobalt(I)‐catalyzed hydroacylation of vinylsilanes and alkyl aldehydes to give ketones. Calculation indicated that cobalt(I)‐catalyzed hydroacylation had eight possible reaction pathways. In the cobalt‐hydride complexes IM2a and IM2b, the hydrogen migration occurred prior to the carbon–carbon bond‐forming reaction. In the complexes IM3a1 and IM3b1, the carbonyl elimination reaction occurred prior to the direct reductive elimination reaction. In the cobalt–carbonyl complexes IM4a and IM4b, the carbonyl insertion reaction was much easier to achieve than the decarbonylation reaction. The dominant reaction pathway was the reaction channel IM1a → TS1a → IM2a → TS2a1 → IM3a1 → TS4a → IM4a → TS5a → IM5a → TS6a → IM6a, and the reductive elimination reaction was the rate‐determining step for this channel, so the dominant product predicted theoretically was the linear ketone. Furthermore, the solvation effect was remarkable, and it decreased generally the free energies of the species. Copyright © 2015 John Wiley & Sons, Ltd.     

Theoretical investigations on 4,4′,5,5′‐tetranitro‐2,2′‐1H,1′H‐2,2′‐biimidazole derivatives as potential nitrogen‐rich high energy materials

The ―NH₂, ―NO₂, ―NHNO₂, ―C(NO₂)₃ and ―CF(NO₂)₂ substitution derivatives of 4,4′,5,5′‐tetranitro‐2,2′‐1H,1′H‐2,2′‐biimidazole were studied at B3LYP/aug‐cc‐pVDZ level of density functional theory. The crystal structures were obtained by molecular mechanics (MM) methods. Detonation properties were evaluated using Kamlet–Jacobs equations based on the calculated density and heat of formation. The thermal stability of the title compounds was investigated via the energy gaps (?E_{LUMO ? HOMO}) predicted. Results show that molecules T5 (D = 10.85 km·s^?1, P = 57.94 GPa) and T6 (D = 9.22 km·s^?1, P = 39.21 GPa) with zero or positive oxygen balance are excellent candidates for high energy density oxidizers (HEDOs). All of them appear to be potential explosives compared with the famous ones, octahydro‐1,3,5,7‐tetranitro‐1,3,5,7‐tetraazocane (HMX, D = 8.96 km·s^?1, P = 35.96 GPa) and hexanitrohexaazaisowurtzitane (CL‐20, D = 9.38 km·s^?1, P = 42.00 GPa). In addition, bond dissociation energy calculation indicates that T5 and T6 are also the most thermally stable ones among the title compounds. Copyright © 2014 John Wiley & Sons, Ltd.     

Synthesis,properties, and solvatochromism of 1,3‐dimethyl‐5‐{(thien‐2‐yl)‐[4‐(1‐piperidyl) phenyl]methylidene}‐(1H,3H)‐pyrimidine‐2,4,6‐trione

A new merocyanine dye, 1,3‐Dimethyl‐5‐{(thien‐2‐yl)‐[4‐(1‐piperidyl)phenyl]methylidene}‐ (1H, 3H)‐pyrimidine‐2,4,6‐trione 3 , has been synthesized by condensation of 2‐[4‐(piperidyl)benzoyl]thiophene 1 with N,N′‐dimethyl barbituric acid 2 . The solvatochromic response of 3 dissolved in 26 solvents of different polarity has been measured. The solvent‐dependent long‐wavelength UV/Vis spectroscopic absorption maxima, v_max, are analyzed using the empirical Kamlet–Taft solvent parameters π* (dipolarity/polarizability), α (hydrogen‐bond donating capacity), and β (hydrogen‐bond accepting ability) in terms of the well‐established linear solvation energy relationship (LSER): (1) The solvent independent coefficients s , a , and b and (v_max)₀ have been determined. The McRae equation and the empirical solvent polarity index, E_T(30) have been also used to study the solvatochromism of 3 . Copyright © 2007 John Wiley & Sons, Ltd.     

Cu(II)‐catalyzed oxidation of thiols by superoxide ligated to CoIII2

Copper(II) dramatically catalyzes the oxidation of thiols by a superoxide bridging two Co^III ions. The catalyzed path overwhelmingly dominates over the uncatalysed path and is first order in the superoxo complex concentration. The first‐order rate constants show a first‐order dependence in [Cu²⁺], a second‐order dependence in [thiol] and linearly varies with [H⁺]^?3. On the basis of observed kinetics reported here, it is proposed that Cu(II) reacts with two thiol molecules to form a Cu^II(thiol)₂ complex, an electron is transferred from one ligated thiol to the Cu^II center to form Cu^I(thiol) and a thiyl radical. The copper(I)‐thiol complex is oxidized by the conjugate base of the title complex to regenerate Cu^II(thiol). A Cu^II/I catalytic cycle is thus believed to be responsible for the observed catalysis. Copyright © 2012 John Wiley & Sons, Ltd.     

The mechanisms of the homogeneous,unimolecular, elimination kinetics of several β‐substituted diethyl acetals in the gas‐phase

The rates of gas‐phase elimination of several β‐substituted diethyl acetals have been determined in a static system and seasoned with allyl bromide. The reactions, inhibited with toluene, are homogeneous, unimolecular, and follow first‐order law kinetics. These elimination processes involve two parallel reactions. The first parallel reaction yields ethanol and the corresponding ethyl vinyl ether. The latter product is an unstable intermediate and further decomposes to ethylene and the corresponding substituted aldehyde. The second parallel reaction gives ethane and the corresponding ethyl ester. The kinetics has been measured over the temperature range of 370–441 °C and pressure range of 23–160 torr. The rate coefficients are given by the following Arrhenius equations: The differences in the rates of ethanol formation may be attributed to electronic transmission of the β‐substituent. The comparative kinetic and thermodynamic parameters of the parallel reactions suggest two different concerted polar four‐membered cyclic transition state types of mechanisms. Copyright © 2010 John Wiley & Sons, Ltd.     

Hydrolysis and retro‐aldol cleavage of ethyl threo‐2‐(1‐adamantyl)‐3‐hydroxybutyrate: competing reactions

The hydrolysis of ethyl threo‐2‐(1‐adamantyl)‐3‐hydroxybutyrate ( 1 ) and the parent ester ethyl 3‐hydroxybutyrate ( 4 ) has been studied experimentally and computationally. In the hydrolysis of threo‐ester 1 with 2 M NaOH, predominantly retro‐aldol product was observed, whereas the hydrolyzed product was present in a minor amount. When the reaction is carried out under the same conditions with the parent ester ethyl 3‐hydroxybutyrate ( 4 ), hydrolyzed product is exclusively observed. The competitive pathways, namely hydrolysis and the retro‐aldol reaction for 1 and 4 were investigated using DFT calculations in the both gas and solvent phase. The calculated results in the solvent phase at B3LYP/6–31 + G* level revealed that the formation of retro‐aldol products is kinetically preferred over the hydrolysis of threo‐ester 1 in the presence of a base. However, the parent ester 4 showed that the retro‐aldol process is less favored than the hydrolysis process under similar conditions. The steric effect imposed by the bulky adamantyl group to enhance the activation barriers for the hydrolysis of the ethyl threo‐2‐(1‐adamantyl)‐3‐hydroxybutyrate ( 1 ) was further supported by the calculations performed with tert‐butyl group at the α‐carbon atom of ethyl 3‐hydroxybutyrate ( 7 ). Copyright © 2010 John Wiley & Sons, Ltd.     

An experimental investigation of substituent effects on the formation of 2,3‐dihydroquinazolin‐4(1H)‐ones: a kinetic study

The effect of different substituents on the kinetics of the reactions between 2‐amino‐benzamide and some of benzaldehyde derivatives have been spectrally investigated in the presence of formic acid. The proposed mechanism were challenged due to the determination of rate‐determining step (RDS) and also, to obtain the general rate law of the reaction. For all substituents, the reactions followed the second‐order kinetics and the partial orders of reactions were recognized with respect to each reactant. Electron withdrawing substituents on benzaldehyde ring increased the rate of reaction. Kinetic values (k and E_a) and associated activation parameters (ΔH^?, ΔG^? and ΔS^?) of the reactions were determined. Both the Arrhenius and the Eyring equations were used to calculate activation energy. Comparison of magnitude of and T showed that the reactions were enthalpy controlled. Isokinetic plots for the reactions were plotted and linear relationship between and recognized that relative contribution of enthalpy and entropy to the overall free energy was the same in the reactions.     

Hydrogen‐bonded nucleophile effects in ANS: the reactions of 1‐chloro and 1‐fluoro‐2,4‐dinitrobenzene with 2‐guanidinobenzimidazole, 1‐(2‐aminoethyl)piperidine and N‐(3‐aminopropyl)morpholine in aprotic solvents

The kinetics of the reactions of 2,4‐dinitrofluorobenzene (DNFB) and 2,4‐dinitrochlorobenzene (DNClB) with 2‐guanidinobenzimidazole (2‐GB) at 40 ± 0.2 °C in dimethylsulphoxide (DMSO), toluene, and in toluene–DMSO mixtures, and with 1‐(2‐aminoethyl)piperidine (2‐AEPip) and N‐(3‐aminopropyl)morpholine (3‐APMo) in toluene at 25 ± 0.2 °C were studied under pseudo first‐order conditions. For the reactions of 2‐GB carried out in pure DMSO, the second‐order rate coefficients were independent of the amine concentration. In contrast, the reactions of 2‐GB with DNFB in toluene, showed a kinetic behaviour consistent with a base‐catalysed decomposition of the zwitterionic intermediate. These results suggest an intramolecular H‐bonding of 2‐GB in toluene, which is not present in DMSO. To confirm this interpretation the reactions were studied in DMSO–toluene mixtures. Small amounts of DMSO produce significant increase in rate that is not expected on the basis of the classical effect of a dipolar aprotic medium; the effect is consistent with the formation of a nucleophile/co‐solvent mixed aggregate. For the reactions of 3‐APMo with both substrates in toluene, the second‐order rate coefficients, k_A, show a linear dependence on the [amine]. 3‐APMo is able to form a six‐membered ring by an intramolecular H‐bond which prevents the formation of self‐aggregates. In contrast, a third order was observed in the reactions with 2‐AEPip: these results can be interpreted as a H‐bonded homo‐aggregate of the amine acting as a better nucleophile than the monomer. Most of these results can be well explained within the frame of the ‘dimer nucleophile’ mechanism. Copyright © 2010 John Wiley & Sons, Ltd.     

Mechanistic study on Mo(CO)6‐catalyzed intramolecular [2 + 2] or [2 + 2 + 1] cycloaddition reaction of 5‐allenyl‐1‐ynes

By means of density functional theory, the Mo(CO)₆‐catalyzed intramolecular [2 + 2] or [2 + 2 + 1] cycloaddition reaction of 5‐allenyl‐1‐ynes was investigated. All the intermediates and transition states were optimized completely at B3LYP/6‐311++G(d,p) level (LANL2DZ(f) for Mo). Calculations indicate that the complexation of 5‐allenyl‐1‐ynes with Mo(CO)₆ occurred preferentially at the triple bond to give the complex M1 and then the complexation with the distal double bond of the allenes generates the complex M5 . In this reaction, Mo(CO)₆‐catalyzed intramolecular [2 + 2] cycloaddition is more favorable than [2 + 2 + 1] cycloaddition. The reaction pathway Mo(CO)₆ + R → M5 → T7 → M12 → M13 → T11 → M18 → P4 is the most favorable one, and the most dominant product predicted theoretically is P4 . The solvation effect is remarkable, and it decreases the reaction energy barriers. Copyright © 2011 John Wiley & Sons, Ltd.     

Isomerization and rearrangement of (E)‐ and (Z)‐phenylhydrazones of 3‐benzoyl‐5‐phenyl‐1,2,4‐oxadiazole: evidence for a ‘new’ type of acid‐catalysis by copper(II) salts in mononuclear rearrangement of heterocycles

A kinetic investigation in methanol of the title reaction has evidenced the occurrence of two processes: the 1‐ E 1‐ Z isomerization and the rearrangement of the (Z)‐isomer into the relevant 4‐benzoylamino‐2,5‐diphenyl‐1,2,3‐triazole ( 1‐ Z → T ). The latter reaction is in line with the ability of the (Z)‐phenylhydrazones of 3‐benzoyl‐1,2,4‐oxadiazoles to undergo the so called mononuclear rearrangement of heterocycles (MRH). The occurrence of both the examined reactions is dependent on a Lewis‐acid‐catalysis. The obtained results have shown the possibility of a ‘new’ type of acid‐catalysis (bifunctional catalysis by Lewis salts) in the MRH. This catalysis operates through a completely different mechanism with respect to the one recently observed, and deeply investigated, in the presence of protic acids for the (Z)‐phenylhydrazone of 5‐amino‐3‐benzoyl‐1,2,4‐oxadiazole, in both dioxane/water and toluene, for which the catalytic process was dependent on the protonation of N(4) ring‐nitrogen of the 1,2,4‐oxadiazole. As a matter of fact, the copper salts seem able to interact with the >C?N? NH? C₆H₅ moiety, yielding adducts which, in some cases, are prone to both isomerize and rearrange. Therefore, a similar behaviour in some manner parallel to that already observed in benzene in the presence of aliphatic amines (base‐catalysis) has been evidenced. Copyright © 2008 John Wiley & Sons, Ltd.     

Calculated polar substituent effects on the stability of 3‐substituted(X) bicyclo[1.1.1]pent‐1‐yl cations and 4‐substituted(X) bicyclo[2.2.1]hept‐1‐yl cations: a DFT study

The effects of substituents on the stability of 3‐substituted(X) bicyclo[1.1.1]pent‐1‐yl cations (3) and 4‐substituted(X) bicyclo[2.2.1]hept‐1‐yl cations (4), for a set of substituents (X = H, NO₂, CN, NC, CF₃, CHO, COOH , F, Cl, HO, NH₂, CH₃, SiH₃, Si(CH₃)₃, Li, O^?, and NH₃⁺) covering a wide range of electronic substituent effects were calculated using the DFT theoretical model at the B3LYP/6‐311 + G(2d,p) and B3LYP/6‐31 + G (d) levels of theory, respectively. Linear regression analysis was employed to explore the relationship between the calculated relative hydride affinities (ΔE, kcal/mol) of the appropriate isodesmic reactions for 3/4 and polar field/group electronegativity substituent constants (σ_F and σ_χ, respectively). The analysis reveals that the ΔE values for both systems are best described by a combination of both substituent constants. The result highlights the importance of the σ_χ dependency of charge delocalization in these systems. Copyright © 2012 John Wiley & Sons, Ltd.     

High‐resolution stimulated Raman spectroscopy and analysis of the ν1/ν5 (C–H) stretching dyad of C2H4

The high‐resolution stimulated Raman spectra of the ν₁/ν₅ C–H stretching bands of C₂H₄ have been recorded and analyzed by means of the tensorial formalism developed in Dijon for X₂Y₄ asymmetric‐top molecules. A total of 689 lines (428 for ν₅ and 261 for ν₁) were assigned and fitted as a dyad including Coriolis coupling constants. We obtained a global root mean square deviation of 4.39 × 10^{− 3} cm^{− 1} (4.61 × 10^{− 3} cm^{− 1} for ν₁, 4.25 × 10^{− 3} cm^{− 1} for ν₅). The nearby 2ν₂ band, extrapolated from ν₂, was included in the analysis. However, no interaction parameter involving it could be fitted. The analysis is quite satisfactory, although some parts of ν₅ are not very well reproduced, probably indicating some yet unidentified resonances. This region is indeed quite dense, with many interacting dark states that cannot be included at present. Copyright © 2012 John Wiley & Sons, Ltd.     

Surface‐enhanced Raman scattering of 4‐mercaptopyridine on sub‐monolayers of α‐Fe2O3 nanocrystals (sphere,spindle, cube)

We report surface‐enhanced Raman scattering (SERS) spectra from 4‐mercaptopyridine (4‐Mpy) adsorbed on sub‐monolayers of α‐Fe₂O₃ nanocrystals (sphere, spindle, cube). The maximum enhancement factor has been estimated to be about 10⁴ compared to that of 4‐Mpy in solution. A possible mechanism has been proposed that the charge transfer between the α‐Fe₂O₃ nanocrystals and the 4‐Mpy molecules is most likely responsible for the observed enhancement of Raman intensity of adsorbed 4‐Mpy molecules as surface plasmon resonances have not occurred. Copyright © 2009 John Wiley & Sons, Ltd.     

Ru(III), Os(VIII), Pd(II) and Pt(IV) catalysed oxidation of glycyl–glycine by sodium N‐chloro‐p‐toluenesulfonamide: comparative mechanistic aspects and kinetic modelling

The Ru(III)/Os(VIII)/Pd(II)/Pt(IV)‐catalysed kinetics of oxidation of glycyl–glycine (Gly‐Gly) by sodium N‐chloro‐p‐ toluenesulfonamide (chloramine‐T; CAT) in NaOH medium has been investigated at 308 K. The stoichiometry and oxidation products in each case were found to be the same but their kinetic patterns observed are different. Under comparable experimental conditions, the oxidation‐kinetics and mechanistic behaviour of Gly‐Gly with CAT in NaOH medium is different for each catalyst and obeys the underlying rate laws:

• Rate = k [CAT]_t [Gly‐Gly]⁰ [Ru(III)][OH^?]^x
• Rate = k [CAT]_t[Gly‐Gly]^x [Os(VIII)]^y[OH^?]^z
• Rate = k [CAT]_t[Gly‐Gly]^x [Pd(II)][OH^?]^y
• Rate = k [CAT]_t[Gly‐Gly]⁰ [Pt(IV)]^x[OH^?]^y

Here, and x, y, z < 1 in all the cases. The anion of CAT, CH₃C₆H₄SO₂NCl^?, has been postulated as the common reactive oxidising species in all the cases. Under comparable experimental conditions, the relative ability of these catalysts towards oxidation of Gly‐Gly by CAT are in the order: Os(VIII) > Ru(III) > Pt(IV) > Pd(II). This trend may be attributed to the different d‐electronic configuration of the catalysts. Further, the rates of oxidation of all the four catalysed reactions have been compared with uncatalysed reactions, under identical experimental conditions. It was found that the catalysed reaction rates are 7‐ to 24‐fold faster. Based on the observed experimental results, detailed mechanistic interpretation and the related kinetic modelling have been worked out for each catalyst. Copyright © 2008 John Wiley & Sons, Ltd.     

Solvatochromism of 2‐(N,N‐dimethylamino)‐7‐nitrofluorene and the natural dye β‐carotene: application for the determination of solvent dipolarity and polarizability

The effects of solvents on chemical phenomena (rate and equilibrium constants, spectroscopic transitions, etc.) are conveniently described by solvation free‐energy relationships that take into account solvent acidity, basicity and dipolarity/polarizability. The latter can be separated into its components by manipulating the UV–vis spectra of two solvatochromic probes, 2‐(N,N‐dimethylamino)‐7‐nitrofluorene (DMANF) and a di‐(tert‐butyl)‐tetramethyl docosanonaen probe (ttbP9) whose synthesis is laborious and expensive. Recently, we have shown that the natural dye β‐carotene can be conveniently employed instead of ttbP9 for the determination of solvent polarizability (SP) of 76 molecular solvents and four ionic liquids. In the present work, we report the polarizabilities of further 24 solvents. Based on the solvatochromism of β‐carotene and DMANF, we have calculated solvent dipolarity (SD) for 103 protic and aprotic molecular solvents, and ionic liquids. The dependence of SD and SP on the number of carbon atoms in the acyl‐ or alkyl group of several homologous series (alcohols; 2‐alkoxyethanols; carboxylic acid‐ anhydrides, and esters, ionic liquids) is calculated and briefly discussed. Copyright © 2013 John Wiley & Sons, Ltd.