A thorough understanding of the Diels–Alder reaction of 1,3‐butadiene and ethylene

The Diels–Alder (DA) reaction is one of the most important reactions in organic chemistry. The controversy surrounding this reaction as to whether it follows a concerted or stepwise mechanism has existed for a long time. The reaction of 1,3‐butadiene and ethylene is the paradigmatic example of the DA reaction. We have reinvestigated the mechanism of this reaction using density functional theory. The theoretical study considered all types of possible pathways for the reaction of 1,3‐butadiene and ethylene using six functionals at different rungs of Jacob's ladder. Therefore, a complete picture is given for a thorough understanding of the iconic DA reaction, and a new stationary point during the reaction processes has been reported for the first time. The calculated results indicated that three functionals, ωB97X‐D, M06‐2X, and B2‐PLYP, of the fourth and fifth rungs of Jacob's ladder performed well in the investigation of the mechanism of this reaction and that the reliable basis set should be larger than 6‐311+G(2d,p). The cis‐1,3‐butadiene more easily reacted with ethylene compared with 1,3‐butadiene in the trans conformation. The concerted mechanism was found to be energetically favorable, whose energy barrier is around 10 kcal/mol lower than that of the stepwise mechanism. Two investigated solvents, toluene and CH₃CN, had little impact on this simple DA reaction. Copyright © 2014 John Wiley & Sons, Ltd.     

Intramolecular Diels–Alder reaction in enyne–allenes: a computational investigation and comparison with the Myers–Saito and Schmittel reactions

The reaction mechanisms as well as substituted effect and solvent effect of the enyne–allenes are investigated by Density Functional Theory (DFT) method and compared with the Myers–Saito and Schmittel reactions. The Myers–Saito reaction of non‐substituted enyne–allenes is kinetically and thermodynamically favored as compared to the Schmittel reaction; while the concerted [4 + 2] cycloaddition is only 1.32 kcal/mol higher than the C₂? C₇ cyclization and more exothermic (Δ_RE = ?69.38 kcal/mol). For R₁ = CH₃ and t‐Bu, the increasing barrier of the C₂? C₇ cyclization is higher than that for the C₂? C₆ cyclization because of the steric effect, so the increased barrier of the [4 + 2] cycloaddition is affected by such substituted electron‐releasing group. Moreover, the strong steric effect of R₁ = t‐Bu would shift the C₂? C₇ cyclization to the [4 + 2] cycloaddition. On the other hand, for R₁ = Ph, NH₂, O^?, NO₂, and CN substituents, the barrier of the C₂? C₆ cyclization would be more diminished than the C₂? C₇ cyclization due to strong mesomeric effect; the reaction path of C₂? C₇ cyclization would also shift to the [4 + 2] cycloaddition. The solvation does not lead to significant changes in the potential‐energy surface of the reaction except for the more polar surrounding solvent such as dimethyl sulfoxide (DMSO), or water. Copyright © 2009 John Wiley & Sons, Ltd.     

High‐pressure effects on the Diels–Alder reaction in room temperature ionic liquids

The effect of pressure on the Diels–Alder reaction was examined in room temperature ionic liquids, followed by high‐pressure FT‐IR spectroscopy using pressures up to 150 MPa. Pressure enhances the kinetic sensitivity of the reaction. The kinetic effect of fluorophobic interactions was examined using ionic liquids with fluorous cations. Ionic liquids in combination with ZnI₂ as a Lewis acid catalyst were also studied under high pressure. Copyright © 2007 John Wiley & Sons, Ltd.     

Understanding the stereo‐ and regioselectivities of the polar Diels–Alder reactions between 2‐acetyl‐1,4‐benzoquinone and methyl substituted 1,3‐butadienes: a DFT study

The polar Diels–Alder (DA) reactions of 2‐acetyl‐1,4‐benzoquinone (acBQ) with methyl substituted 1,3‐butadienes have been studied using DFT methods at the B3LYP/6‐31G(d) level of theory. These reactions are characterized by a nucleophilic attack of the unsubstituted ends of the 1,3‐dienes to the β conjugated position of the acBQ followed by ring‐closure. The reactions present a total regioselectivity and large endo selectivity. The analysis based on the global electrophilicity of the reagents at the ground state, and the natural bond orbital (NBO) population analysis at the transition states correctly explain the polar nature of these cycloadditions. The large electrophilic character of acBQ is responsible for the acceleration observed in these polar DA reactions. Copyright © 2008 John Wiley & Sons, Ltd.     

The water‐promoted Diels–Alder reaction in quaternary ammonium salts

Prevailing classification of salts based on their effect in solubility and stability of proteins in aqueous solution predicts that tetraalkylammonium salts, guanidinium chloride (GnCl), LiClO₄ act as salting‐in (S/I) and LiCl, NaCl act as salting‐out (S/O) in aqueous conditions. In the same context the behaviour of GnCl, LiClO₄ and LiCl are contradictory in polar solvents like ethylene glycol and formamide. In these solvents, expected salt effect shows just opposite nature from their usual expectation. However, in the aqueous solution salts like tetraalkylammonium halide (R₄NX, R = alkyl group, X = Br group) behave like salting‐in salts. The physicochemical origin of the salting in effect of R₄NX type of salts has been discussed elaborately in the present work. The role of cations in terms of substitution of various alkyl groups on R₄NX has been systematically presented here on the basis of experimental kinetic and thermodynamic studies. The abnormal behaviour of R₄NX salts in aqueous solution has also been explained by the Setschenov equation (k_s) and Δμ_solvation values, which highlights their individual nature out of common properties of R₄NX. Copyright © 2015 John Wiley & Sons, Ltd.     

Surfactant‐assisted specific‐acid catalysis of Diels–Alder reactions in aqueous media

Surfactant‐assisted specific‐acid catalysis (SASAC) for Diels–Alder reactions of dienophiles 1 and 4 with cyclopentadiene 2 in aqueous media at 32 °C was studied. This study showed that acidified anionic surfactants (pH 2) such as sodium dodecyl sulfate (SDS) and linear alkylbenzene sulfonic acid (LAS) accelerate Diels—Alder reactions. Conversely, under similar reaction conditions (pH 2) these reactions are inhibited by (acidified) cationic surfactants such as dodecyltrimethylammonium bromide (DTAB), dodecyldimethylammonium bromide (DDAB), and dodecylmethylammonium bromide (DMAB). A modest rate acceleration resulting from the surfactant hydrogen‐bonding capacity is also recorded for the Diels–Alder reaction of naphthoquinones ( 6 ) with cyclopentadiene ( 2 ) in aqueous media at 32 °C. Copyright © 2007 John Wiley & Sons, Ltd.     

Aza‐Diels–Alder reaction between cyclopentadiene and protonated N‐phenylethyliminoacetates of 8‐phenylmenthol and 8‐phenylneomenthol: a density functional theory study

The cycloaddition between glyoxylate imines possessing two chiral auxiliaries, N‐(R)‐ or N‐(S)‐1‐phenylethyl and 8‐phenylmenthyl or 8‐phenylneomenthyl, and cyclopentadiene is described. Computational calculations using density functional theory with the Becke, three‐parameter, Lee–Yang–Parr functional and the 6‐31G(d) basis set were performed to better understand the highly diastereoselective mechanism and the exo‐selectivity observed experimentally for these ionic aza‐Diels–Alder reactions. Copyright © 2011 John Wiley & Sons, Ltd.     

Effect of Lewis acids on the Diels–Alder reaction in ionic liquids with different activation modes

The Diels–Alder reaction has been examined in room temperature ionic liquids with high molar concentrations of Lewis acids under various conditions. A molar ratio of 10% catalyst gave a large increase in the selectivity and the yield of the reaction. The effect of catalysts on reaction rates was also examined under 100 MPa of pressure which leads to modest improvements in reaction rates. Ultrasound and microwave dielectric heating were also shown to improve the rate and, to a minor extent, selectivity of the examined reactions. Copyright © 2008 John Wiley & Sons, Ltd.     

Regioselectivity and stereoselectivity of Diels–Alder reaction: a DFT study on the functionalization of organic semiconductor crystals

Diels–Alder (DA) reaction is one of the most commonly tools in functionalizing organic semiconductor crystals. The DA reactions of two organic semiconductors, i.e. tetracene ( 1 ) and rubrene ( 2 ), to several dienophiles ( 3 to 7 ) were performed experimentally recently. But the kinetics and mechanism of stereoselectivity and regioselectivity remain unknown. In the current study, all related 20 DA reactions (totally 32 possible pathways) were investigated by density functional theory. It was found that the reaction of 7 and a–b position of 1 is the most favorable one. The c–d position of 2 is more reactive than its a–b position when 2 combines with 3 , but is less reactive when combines with 4 to 7 . The endo and exo pathways have similar activation barriers in each reaction. The rate coefficients were calculated using the canonical variational transition state theory and their Arrhenius expressions were fitted. The theoretical conclusion agrees with the experimental observations and is of general importance for similar reactions. Solvent has a slight effect on these reactions. Copyright © 2016 John Wiley & Sons, Ltd.     

A DFT study on Diels–Alder cycloadditions of trans‐1,3‐butadiene to C60 and C70

Investigation of the relative reactivity of bonds in fullerenes will provide fundamental theory for the design of fullerene‐based materials. We have theoretically investigated the reactivity of the Diels–Alder (DA) cycloaddition of cis‐1,3‐butadiene to all types of bonds in C₆₀ and C₇₀ using the M06‐2X hybrid density functional theory (DFT) calculations (J. Phys. Org. Chem. 2012, 25 850–855) and have pointed out that the DA cycloadditions of cis and trans forms of 1,3‐butadiene to ethylene have a specially intimate relationship (J. Phys. Org. Chem. 2014, 27 652–660). For the aim of telling a whole story of the DA cycloaddition concerning C₆₀ and C₇₀, the DA cycloadditions of trans‐1,3‐butadiene to all types of bonds in C₆₀ and C₇₀ were explored at the same theoretical level as those of the cis‐1,3‐butadiene. The calculated results related with the trans‐ and cis‐1,3‐butadienes were compared. The potential energy curves of DA cycloadditions of trans‐ and cis‐1,3‐butadiene to C₆₀ and C₇₀ were discussed. The distortion–interaction energy model was employed to elucidate the origin of different reactivity of all kinds of C?C bonds. The solvent effects were examined using the continuum solvent model. These current results, along with our previous research, will help to obtain an overall view of the DA cycloadditions of 1,3‐butadiene to C₆₀ and C₇₀. Copyright © 2014 John Wiley & Sons, Ltd.     

Trapping intermediates and comparing relative reactivities: a DFT M06‐2X study on Diels–Alder cycloadditions of butadiene to C60 and C70

All possible types of Diels–Alder cycloadditions of 1,3‐cis‐butadiene to C₆₀ (2 in total) and to C₇₀ (8 in total) were theoretically investigated by the M06‐2X density functional method in gas phase and solutions. An intermediate between the reactant and the transition state was located for each reaction. These intermediates except one have not been experimentally or theoretically reported before. The reactivities of the 10 reactions in both the gas phase and solutions were systematically compared based on the calculated results. The present conclusion agrees with the experimental observations and partly disagrees with the previously theoretical conclusion. Copyright © 2012 John Wiley & Sons, Ltd.     

Homo‐Diels–Alder reaction of a very inactive diene,bicyclo[2,2,1]hepta‐2,5‐diene,with the most active dienophile, 4‐phenyl‐1,2,4‐triazolin‐3,5‐dione. Solvent,temperature, and high pressure influence on the reaction rate

Solvent, temperature, and high pressure influence on the rate constant of homo‐Diels–Alder cycloaddition reactions of the very active hetero‐dienophile, 4‐phenyl‐1,2,4‐triazolin‐3,5‐dione (1), with the very inactive unconjugated diene, bicyclo[2,2,1]hepta‐2,5‐diene (2), and of 1 with some substituted anthracenes have been studied. The rate constants change amounts to about seven orders of magnitude: from 3.95^.10^?3 for reaction (1+2) to 12200 L mol^?1 s^?1 for reaction of 1 with 9,10‐dimethylanthracene (4e) in toluene solution at 298 K. A comparison of the reactivity (ln k₂) and the heat of reactions (?_r‐nH) of maleic anhydride, tetracyanoethylene and of 1 with several dienes has been performed. The heat of reaction (1+2) is ?218 ± 2 kJ mol^?1, of 1 with 9,10‐dimethylanthracene ?117.8 ± 0.7 kJ mol^?1, and of 1 with 9,10‐dimethoxyanthracene ?91.6 ±0.2 kJ mol^?1. From these data, it follows that the exothermicity of reaction (1+2) is higher than that with 1,3‐butadiene. However, the heat of reaction of 9,10‐dimethylanthracene with 1 (?117.8 kJ mol^?1) is nearly the same as that found for the reaction with the structural C=C counterpart, N‐phenylmaleimide (?117.0 kJ mol^?1). Since the energy of the N=N bond is considerably lower (418 kJ/bond) than that of the C=C bond (611 kJ/bond), it was proposed that this difference in the bond energy can generate a lower barrier of activation in the Diels–Alder cycloaddition reaction with 1. Linear correlation (R = 0.94) of the solvent effect on the rate constants of reaction (1+2) and on the heat of solution of 1 has been observed. The ratio of the volume of activation (?V^≠) and the volume of reaction (?V_r‐n) of the homo‐Diels–Alder reaction (1+2) is considered as “normal”: ?V^≠/?V_r‐n = ?25.1/?30.95 = 0.81. Copyright © 2012 John Wiley & Sons, Ltd.     

Experimental survey of the kinetics of acene Diels–Alder reactions

Second‐order rate constants were gathered for solution Diels–Alder reactions of substituted and unsubstituted acenes, with the intention of ascertaining ideal diene–dienophile combinations. Particular focus was placed on the larger ring systems namely tetracene, pentacene, and rubrene. The rate constants between the acenes ranged roughly six orders of magnitude, from the slowest reacting diene, rubrene, to the fastest diene, pentacene. The utilized dienophiles covered a large range of reactivity from 2,3‐dichloromaleic anhydride to tetracyanoethylene. To aid in the interpretation of acene reactivity, constants were compared to the extensive body of Diels–Alder literature with well‐studied dienes such as anthracene and trans‐1‐methoxy‐1,3‐butadiene serving as points of reference. Complex reaction kinetics for the addition of MeTAD and rubrene was found: initial fast consumption generated an intermediate, followed by dramatically slower product formation. The kinetic data creates a foundation for the analysis of prior and future reactions between organic semiconductor acene materials with volatized dienophiles, a surface functionalization technique for enhancing these electronic materials. Copyright © 2015 John Wiley & Sons, Ltd.     

Theoretical investigation of an unusual substituent effect on the dienophilicity of >CP? functionality present in 2‐phosphaindolizines

Effect of the number and positions of the methoxycarbonyl substituents in 2‐phosphaindolizine on the feasibility of its Diels–Alder (DA) reaction with 1,3‐butadiene has been investigated theoretically at the density functional theory (DFT) level. Among the series of four differently substituted 2‐phosphaindolizines, 3‐methoxycarbonyl‐2‐phosphaindolizine does not undergo the DA reaction due to the highest activation barrier (29.49 kcal mol^?1) and endothermicity, whereas the activation barrier of the corresponding reaction of 1,3‐bis(methoxycarbonyl)‐2‐phosphaindolizine is lowest (22.43 kcal mol^?1) with exothermicity making it possible to occur. This reactivity trend is corroborated by FMO energy gaps as well as by global electrophilicity powers of the reactants. Copyright © 2008 John Wiley & Sons, Ltd.     

Substituent effects in the Baeyer–Villiger reaction of acetophenones: a theoretical study

This paper reports the first complete theoretical study of substituent effects on the mechanism of the Baeyer– Villiger (BV) reaction in non‐polar solvents taking into account the lowest‐energy mechanism that has been proposed for this rearrangement which is non‐ionic and fully concerted. The BV reaction of p‐substituted acetophenones, p‐XC₆H₄COCH₃ (X = NO₂, CN, H, CH₃, OCH₃), with performic (PFA) and trifluoroperacetic (TFPAA) acids, catalyzed by formic (FA) and trifluoroacetic (TFAA) acids, respectively, using the MPWB1K functional and the 6‐311G(d,p) and 6‐311++G(d,p) basis sets, are studied. Solvent effects are taken into account by means of the PCM continuum model using dichloromethane as solvent. Electron‐donating substituents on the aryl group have a relatively small activation effect on the first step, but a pronounced activation effect on the second to the point of being able to change the rate‐determining step (RDS) of the reaction, as observed in the case of p‐methoxyacetophenone with TFPAA acids. After analyzing the changes in Gibbs free energy of activation, geometrical parameters, and charge distributions of the transition states (TSs), explanations are provided for the two distinct effects that substituents on the ketone have on the kinetics of the addition and migration steps of the BV oxidation. The effect of the acid/peracid pair used is also discussed. Copyright © 2008 John Wiley & Sons, Ltd.     

Substituent effects on indirect carbon–carbon couplings,J(CC), in substituted thiophenes,pyrroles, and furans studied by experiment and theory

An excellent linear correlation is found between a large set of experimental spin–spin carbon–carbon coupling constants, J(CC), in thiophene, pyrrole, and furan systems and the corresponding B3PW91/6‐311++G(2d,p)//B3PW91/6‐311++G(2d,p) calculated estimates. The correlation does not differ significantly from the simplest relationship possible, J(CC)_exp. = J(CC)_calcd., within a small and random spread of about 1 Hz. There are 285 experimental values considered, and 202 out of these are new and come from the present work. The character of the correlation indicates that rovibronic effects on aromatic J(CC)'s, and those of nuclear motions on aromatic J(CC)'s are practically negligible. All of this is in a perfect agreement with our recent extensive studies on aromatic J(CC)'s in pyridine and benzene ring systems. As has been shown by computations, not only large one‐bond couplings but also almost all long‐range ones occurring between the carbons of the heteroaromatic rings are, with a few exceptions, positive. Significant substituent effects experimentally observed in the one‐bond as well as long‐range couplings are very accurately reproduced by the computation. The experimental coupling magnitudes vary from ca. 1 to 98 Hz. The J(CC)'s computed for the model variously substituted trimethylsilyl and fluoro derivatives, which are not easily accessible experimentally, span a range of about 130 Hz, from ca. ?2 in up to ca. +125 Hz . Copyright © 2012 John Wiley & Sons, Ltd.     

Kinetics study of a Diels‐Alder reaction in mixtures of an ionic liquid with molecular solvents

The second‐order rate constants for cycloaddition reaction of cyclopentadiene with naphthoquinone were determined spectrophotometrically in various compositions of 1‐(1‐butyl)‐3‐methylimidazolium terafluoroborate ([bmim]BF₄) with water and methanol at 25 °C. Rate constants of the reaction in pure solvents are in the order of water > [bmim]BF₄ > methanol. Rate constants of the reaction decrease sharply with mole fraction of the ionic liquid in aqueous solutions and increase slightly to a maximum in alcoholic mixtures. Multi‐parameter correlation of logk₂ versus solute–solvent interaction parameters demonstrated that solvophobicity parameter (Sp), hydrogen‐bond donor acidity (α) and hydrogen‐bond acceptor basicity (β) of media are the main factors influencing the reaction rate constant. The proposed three‐parameter model shows that the reaction rate constant increases with Sp, α and β parameters. Copyright © 2008 John Wiley & Sons, Ltd.     

Reactions of (1‐nitroethenyl)sulfonylbenzene,a nitroethene derivative geminally substituted by a second W‐group

Nitroaldol reaction of phenylsulfonylnitromethane with formaldehyde affords a mixture of 2,4‐dinitro‐2,4‐bis(phenylsulfonyl)butan‐1‐ol and 2,4‐dinitro‐2,4‐ bis(phenylsulfonyl)pentane‐1,5‐diol. Treatment of this mixture with base followed by reacidification affords 1,1'‐[(1,3‐dinitro‐1,3‐propanediyl)bis(sulfonyl)]bis(benzene) as a mixture of (R*, R*) and (R*, S*)‐diastereomers from which the (R*, S*)‐diastereomer can be obtained pure. The intermediate in the nitroaldol reaction is (1‐nitroethenyl)sulfonylbenzene and, if dienes are present, additional products are also obtained. If either (E)‐2‐methyl‐1,3‐pentadiene or 1‐(1‐methylethenyl)cyclohexene are present, typical Diels‐Alder adducts are obtained with the major isomers explainable by assuming a transition state in which the nitro group is endo. If furan is present, its formal conjugate addition product, 2‐[2‐nitro‐2‐(phenylsulfonyl)ethyl]furan, is formed. If cyclooctatetraene is present, it first dimerizes and then affords isomeric Diels‐Alder cycloadducts of the dimer. Semiempirical calculations comparing the LUMO energies of (1‐nitroethenyl)sulfonylbenzene to the corresponding trans‐1,2 isomer are presented to explain relative reactivity of 1,1‐ and 1,2‐disubstituted dienophiles. Copyright © 2009 John Wiley & Sons, Ltd.     

Solvent effects in the reaction between (anthracen‐9‐yl)methyl sulfides and electron‐deficient acetylenes

Solvent‐dependent diverse reactivity of (anthracen‐9‐yl)methyl sulfides with a few electron‐deficient acetylenes is described. Diversity in reactivity is attributed to competition between one electron transfer, two electron transfer and Diels–Alder reaction of these sulfides with electron‐deficient acetylenes. We have proposed plausible mechanisms to account for various reactions observed by us. Copyright © 2015 John Wiley & Sons, Ltd.     

Substituent effects on the ring‐opening mechanism of gem‐dibromospiropentanes to related allenes: a theoretical study

Density functional theory computations at B3LYP and X3LYP levels were performed for ring openings of substituted gem‐dibromospiropentanes (R = ―H, ―Cl, ―Br, ―CH₃, ―SiH₃, ―OH, ―OCH₃, ―CF₃, ―BF₂, and ―SH) to related allenes. The conversion of spiropentanoids 5a , 5b , 5c , 5d , 5e , 5f , 5g , 5h , 5i , 5j to the corresponding allenes 7a , 7b , 7c , 7d , 7e , 7f , 7g , 7h , 7i , 7j can proceed in both concerted and stepwise mechanism except for R = ―H. Both ring‐opening mechanisms have similar activation energy barriers to open the spiropentanylidene ring and generate the structure of allene at all theoretical levels used herein. Generally the π electron‐donating group (―OH or ―SH) decreases the activation barrier for the follow‐up reaction of 1‐bromo‐1‐lithiospiropentanoid and free spiropentanylidene. Hence, both bearing electron‐donating substituents are more reactive than those with electron‐withdrawing group, and the first one to open the ring to the LiBr–allene complex does so more readily than the second. The sEDA index used to measure sigma‐electron excess/deficiency of the cyclopropylidene ring is mutually correlated for the studied systems. Copyright © 2015 John Wiley & Sons, Ltd.