Innovative macromolecular syntheses via isocyanide multicomponent reactions

Isocyanide multicomponent reactions assemble more than two reaction components by exploiting the reactivity of the isocyanide carbon atom toward addition of electrophiles and nucleophiles. Reactions such as the Passerini three‐component and Ugi four‐component coupling reactions have a long and successful history in organic synthesis, which has only recently been explored in polymer chemistry. In a short time, this class of multicomponent reactions has been established as a viable method for the synthesis of linear polymers as well as more complex architectures such as miktoarm star polymers and dendrimers. This highlight discusses the recent accomplishments made with regard to innovative syntheses of polymers and dendrimers via the Passerini and Ugi reactions. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3985–3991     

Catalytic cyclopolymerization and copolymerization of 1,6‐heptadiynes by Mo(CO)6

The catalytic polymerization of a series of 1,6‐heptadiynes (1–4) by Mo(CO)₆ under simple thermal conditions produces corresponding poly(1,6‐heptadiyne)s with highly conjugated polyenes. The number‐average molecular weights of the polymers range from 2400 to 110,000. The structures of the polymers depend on the types of monomers employed. Namely, diethyl dipropargylmalonate (DEDPM) and 1 result in a polyene backbone consisting of only five‐membered rings, whereas the remaining monomers (2–4) result in a mixture of both five‐membered and six‐membered ring structures. The copolymerization of DEDPM and phenylacetylene (PA) can also be effected by the same catalysis to yield a polyene backbone consisting of only five‐membered rings as well as PA. The relative molar ratio of the two monomers determines the yields and molecular weights of the copolymers. Comparative studies show that Mo(CO)₆ exhibits reactivity toward DEDPM alone, thus initially catalyzing metathesis cyclopolymerization of DEDPM followed by copolymerization with PA. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2663–2670, 2000     

Use of N‐methyliminodiacetic acid boronate esters in suzuki‐miyaura cross‐coupling polymerizations of triarylamine and fluorene monomers

Polytriarylamine copolymers can be prepared by Suzuki‐Miyaura cross‐coupling reactions of bis N‐methyliminodiacetic acid (MIDA) boronate ester substituted arylamines with dibromo arenes. The roles of solvent composition, temperature, reaction time, and co‐monomer structure were examined and (co)polymers prepared containing 9, 9‐dioctylfluorene (F8), 4‐sec‐butyl or 4‐octylphenyl diphenyl amine (TFB), and N, N′‐bis(4‐octylphenyl)‐N, N′‐diphenyl phenylenediamine (PTB) units, using a Pd(OAc)₂/2‐dicyclohexylphosphino‐2′,6′‐dimethoxybiphenyl (SPhos) catalyst system. The performance of a di‐functionalized MIDA boronate ester monomer was compared with that of an equivalent pinacol boronate ester. Higher molar mass polymers were produced from reactions starting with a difunctionalized pinacol boronate ester monomer than the equivalent difunctionalized MIDA boronate ester monomer in biphase solvent mixtures (toluene/dioxane/water). Matrix‐assisted laser desorption/ionization mass spectroscopic analysis revealed that polymeric structures rich in residues associated with the starting MIDA monomer were present, suggesting that homo‐coupling of the boronate ester must be occurring to the detriment of cross‐coupling in the step‐growth polymerization. However, when comparable reactions of the two boronate monomers with a dibromo fluorene monomer were completed in a single phase solvent mixture (dioxane + water), high molar mass polymers with relatively narrow distribution ranges were obtained after only 4 h of reaction. © 2017 The Authors. Journal of Polymer Science Part A: Polymer Chemistry Published by Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2798–2806     

Catalytic [2 + 2 + 2] cycloaddition polymerization of diyne–nitrile monomers in the presence of CoCl2‐6H2O/diphosphine/Zn

Cobalt‐catalyzed [2 + 2 + 2] cocycloaddition reaction of 1,6‐diynes and nitriles to generate substituted pyridines has been applied to the polymerization of diyne–nitrile monomers, the reaction of which proceeded smoothly in a step‐growth fashion to provide linear polymers comprising pyridine structures in the main chain. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 345–351     

Synthesis of new optically active α,α′,β‐trisubstituted‐β‐lactones as monomers for stereoregular biopolyesters

Various optically active (4R)‐alkyloxycarbonyl‐3,3‐dialkyl‐2‐oxetanones as monomers were synthesized from L‐(S)‐malic acid in six steps to prepare a new family of stereopolyesters for biomedical applications. The synthesis began with an esterification followed of a dialkylation in the aim to introduce hydrophobic groups as methyl or reactive group as allyl. Then, a saponification has permitted to obtain the corresponding diacids that reacted with appropriate alcohols to furnish different monoesters. The last and most important step was activation of hydroxyl group of monoesters with the asymmetric carbon configuration inversion according to the Mitsunobu reaction. Thus, this reaction has provided lactones from monoesters with 100% enantiomeric excess which was confirmed by ¹H NMR and by the synthesis of corresponding isotactic and semicrystalline homopolyesters. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2586–2597     

Novel hyperbranched polymers synthesized via A3 + B(B′) approach by radical addition‐coupling polymerization

In this study, a novel application of radical addition‐coupling polymerization (RACP) for synthesis of hyperbranched polymers is reported. By Cu/PMDETA‐mediated RACP of 2‐methyl‐2‐nitrosopropane with trimethylolpropane tris(2‐bromopropionate) or a bromo‐ended 3‐arm PS macromonomer, two types of hyperbranched polymers with high degree of polymerization are synthesized under mild conditions, respectively. The chemical structures of the hyperbranched polymers are carefully characterized. By selective degradations of the ester groups and weak bonds of NO? C in the polymers, high degree of alternative connection of the two monomers in the synthesized polymers have been identified. Based on the experimental results, mechanism of formation of the hyperbranched polymer is proposed, which includes formation of carbon radicals from the tribromo monomer through single electron transfer, its capture by 2‐methyl‐2‐nitrosopropane that results in nitroxide radical, and cross‐coupling reaction of the nitroxide radical with other carbon radicals. Hyperbranched polymer can be formed in a step‐growth mode after multiple steps of such reactions. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 904–913     

Direct synthesis of polyaromatic chains of tribenzopentaphene copolymers through cyclodehydrogenation of their poly‐tetraphenylbenzene precursors

Three polyaromatic‐based polymers are reported to contain co‐monomers of trapezoidal tribenzopentaphene (TBP) polycyclic aromatic hydrocarbons. The synthetic strategy consists of initially making highly soluble tetraphenylbenzene copolymers 4a–c , followed by a cyclodehydrogenation/aromatization reaction to obtain target polymers 5a–c . The polymers were characterized by gel permeation chromatography, FT‐IR, UV‐vis, emission, ¹H‐, and ¹³C‐nuclear magnetic resonance spectroscopy. The target polymers 5a–c reveal emission spectra in the range of 430–480 nm; thus, qualifying them to act as blue emitters. Investigation of the polymers optical properties and their correlation with density functional theory calculations suggest a distorted TBP core from planarity caused by the introduction of a dodecyl group at its wide edge. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3565–3572     

Oligomeric aliphatic–aromatic ether containing phthalonitrile resins

A versatile synthetic method has been developed for oligomeric aliphatic–aromatic ether containing phthalonitrile (PN) resins and applied to the preparation of three unique resin systems. The oligomeric PN monomers were prepared from the reaction of an excess amount of bisphenol A with a dihalo‐aliphatic containing compound in the presence of K₂CO₃ in dimethylsulfoxide, followed by end‐capping with 4‐nitrophthalonitrile in a two‐step, one‐pot reaction. These PN resin systems exhibited excellent viscosities for molding various shaped articles after thermal curing to yield crosslinked polymers. These polymers offered more mechanical flexibility, when compared with an all aromatic backbone, while still maintaining good thermal stability, dielectric properties, and low water absorption. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2186–2191     

A versatile method for cyclic polymers from conjugated and unconjugated vinyl monomers

A versatile method was introduced to prepare cyclic polymers from both conjugated and unconjugated vinyl monomers. It was developed on the combination of the RAFT polymerization and the self‐accelerating double strain‐promoted azide‐alkyne click (DSPAAC) reaction. In this approach, a switchable chain transfer agent 1 was designed to have hydroxyl terminals and a functional pyridinyl group. The protonation and deprotonation of pyridinyl group endowed the chain transfer agent 1 with a switchable control capability to RAFT polymerization of both conjugated and unconjugated vinyl monomers. Based on this, RAFT polymerization and the following hydroxyl end group modification were used to prepare various azide‐terminated linear polymers including polystyrene, poly(N‐vinylcarbazole), and polystyrene‐block‐poly(N‐vinylcarbazole). Using sym‐dibenzo‐1,5‐cyclooctadiene‐3,7‐diyne (DBA) as small linkers, the corresponding cyclic polymers were then prepared via the DSPAAC reaction between DBA and azide terminals of the linear precursors. Due to the self‐accelerating property of DSPAAC reaction, this bimolecular ring‐closing reaction could efficiently produce the pure cyclic polymers using excess molar amounts of DBA to linear polymer precursors. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 1811–1820     

Precision synthesis of acrylate multiblock copolymers from consecutive microreactor RAFT polymerizations

Well‐defined acrylate RAFT polymers and multiblock‐copolymers have been synthesized via the use of a continuous‐flow microreactor, in which polymerizations could be executed in 5?20 min reaction time. First, Poly(n‐butyl acrylate) (PnBuA) was synthesized in the micro‐flowreactor by using two different trithiocarbonate RAFT agents. Reaction time and reaction temperature were optimized and collected samples were directly studied with NMR, SEC and ESI‐MS to determine conversion, molar mass and end group fidelity. Using the continuous flow technique, highly reproducible and fast polymerizations yielded quantitatively functionalized PnBuA in a very facile and efficient manner. One batch of RAFT acrylate polymer with a molar mass of 1100 g mol^?1 and excellent end group fidelity was employed as a macro‐RAFT agent for the subsequent copolymerization with different acrylate monomers (2‐ethylhexyl acrylate, t‐butyl acrylate, n‐butyl acrylate). Using this procedure, a sequential multiblock‐copolymer (M_n = 31,200 g mol^?1, PDI = 1.46) consisting of five consecutive acrylate blocks was synthesized. This study clearly demonstrates the potential of using a continuous‐flow microreactor for subsequent RAFT polymerizations towards well‐defined multiblock‐copolymers. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013, 51, 2366–2374     

Blue to light gray electrochromic polymers from dodecyl‐derivatized thiophene Bis‐substituted dibenzothiophene/dibenzofuran

3‐Dodecylthiophene end‐capped two monomers: 2,8‐bis‐(4‐dodecyl‐thiophen‐2‐yl)‐dibenzothiophene (DBT‐3DTh) and 2,8‐bis‐(4‐dodecyl‐thiophen‐2‐yl)‐dibenzofuran (DBF‐3DTh) were synthesized via Stille coupling reaction. Both monomers exhibited emission peaks at about 400 nm with fluorescence quantum yields ranging from 0.16 to 0.21. The corresponding electroactive polymers poly(2,8‐bis‐(4‐dodecyl‐thiophen‐2‐yl)‐dibenzothiophene) (PDBT‐3DTh) and poly(2,8‐bis‐(4‐dodecyl‐thiophen‐2‐yl)‐dibenzofuran) (PDBF‐3DTh) were obtained by electropolymerization method and displayed good electrochemical stability. Both polymers switched between light gray in the neutral state and blue in the oxidized state. Kinetic investigations showed that PDBT‐3DTh exhibited a maximum optical contrast (ΔT %) of 25.23% at 575 nm with the coloration efficiency (CE) of 196 cm² C^?1. However, the electrochromic properties of PDBF‐3DTh were inferior to PDBT‐3DTh. Further detailed discussions with EDOT and 3‐alkylthiophenes end‐capped DBT/DBF hybrid electrochromic polymers were comparatively studied. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1468–1478     

Synthesis and characterization of a thermotropic liquid‐crystalline poly[2,5‐bis(4′‐alkoxycarbonylphenyl) styrene]

We report the synthesis and characterization of a series of novel mesogen‐jacketed liquid‐crystalline polymers, poly[2,5‐bis(4′‐alkoxycarbonylphenyl)styrene]s ( 1‐m , where m is the number of carbon atoms in the alkyl tails), along with the corresponding monomers, 2,5‐bis(4′‐alkoxycarbonylphenyl)styrenes ( 2‐m ), and their precursors, 2,5‐bis(4′‐alkoxycarbonylphenyl)toluenes ( 3‐m ). The influence of the tail length on the thermotropic properties of the two types of low‐molecular‐mass compounds and macromolecules was investigated with a combination of differential scanning calorimetry, polarized optical microscopy, and wide‐angle X‐ray diffraction techniques. Except for compound 3‐3 , which exhibited a monotropic nematic phase, all members of the low‐molar‐mass molecules developed no mesophase during both heating and cooling processes. The glass‐transition temperatures of the polymers decreased as the tail lengths increased. The 5% weight loss temperatures of all the polymers under a nitrogen atmosphere were above 360 °C, indicating quite high thermal stability. Although polymers 1‐1 and 1‐2 were non‐liquid‐crystalline, columnar nematic phases were observed for the remaining homopolymers with longer alkyl tails. The mesophases of 1‐3 to 1‐9 that developed at high temperatures remained upon cooling to room temperature, whereas those of 1‐10 to 1‐12 disappeared during the cooling process. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 830–847, 2007.     

Synthesis and characterization of 9,9‐bis(4‐hydroxyphenyl and 4‐aminophenyl)dibenzofluorenes: Novel fluorene‐based monomers

Two novel 9,9‐difunctionalized fluorene‐type monomers, 9,9‐bis(4‐hydroxyphenyl‐ and 4‐aminophenyl)‐2,3:6,7‐dibenzofluorenes, are synthesized by the reaction of dibenzenzofluorenone with phenol and aniline. These monomers are used for the preparation of polyester and polyimide as the typical polymers to evaluate the property change such as thermal stability caused by the benzene rings fused to the fluorene skeleton with keeping good solubility, in comparison with the polymers derived from simple fluorenone. In fact, these two new polymers have the fairly enhanced thermal stability and refractive index value along with satisfactory solubility in organic solvents, enough to emphasize the fusion effect. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2602–2605     

Synthesis of poly(2‐oxazoline)s with side chain methyl ester functionalities: Detailed understanding of living copolymerization behavior of methyl ester containing monomers with 2‐alkyl‐2‐oxazolines

Poly(2‐oxazoline)s with methyl ester functionalized side chains are interesting as they can undergo a direct amidation reaction or can be hydrolyzed to the carboxylic acid, making them versatile functional polymers for conjugation. In this work, detailed studies on the homo‐ and copolymerization kinetics of two methyl ester functionalized 2‐oxazoline monomers with 2‐methyl‐2‐oxazoline, 2‐ethyl‐2‐oxazoline, and 2‐n‐propyl‐2‐oxazoline are reported. The homopolymerization of the methyl ester functionalized monomers is found to be faster compared to the alkyl monomers, while copolymerization unexpectedly reveals that the methyl ester containing monomers significantly accelerate the polymerization. A computational study confirms that methyl ester groups increase the electrophilicity of the living chain end, even if they are not directly attached to the terminal residue. Moreover, the electrophilicity of the living chain end is found to be more important than the nucleophilicity of the monomer in determining the rate of propagation. However, the monomer nucleophilicity can be correlated with the different rates of incorporation when two monomers compete for the same chain end, that is, in copolymerizations. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2649–2661     

Synthesis and characterization of optically active helical vinyl polymers via free radical polymerization

A facile synthetic route to prepare the dual‐functional molecule, 2,5‐bis(4′‐carboxyphenyl)styrene, was developed. The esterification of this compound with chiral alcohols, that is, (S)‐(+)‐sec‐butanol/(R)‐(?)‐sec‐butanol, (S)‐(+)‐sec‐octanol/(R)‐(?)‐sec‐octanol, and D ‐(+)‐menthol/L ‐(?)‐menthol, respectively, yielded three enantiomeric pairs of novel vinyl monomers, which underwent radical polymerization to obtain helical polymers with an excess screw sense. These polymers exhibited optical rotations as large as fourfold those of the corresponding monomers. Their helical conformations were quite stable as revealed by the almost unchanged chiroptical properties measured at different temperatures. The polymers with linear alkyl tails in the side‐groups formed irreversibly columnar nematic phases in melt although the corresponding monomers were not liquid crystalline. Whereas, the polymers with cyclic tails generated no mesophase. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2408–2421, 2009     

Ugi Reactions with CO2: Access to Functionalized Polyurethanes,Polycarbonates, Polyamides,and Polyhydantoins

A novel strategy for the incorporation of carbon dioxide into polymers is introduced. For this purpose, the Ugi five‐component condensation (Ugi‐5CC) of an alcohol, CO₂, an amine, an aldehyde, and an isocyanide is used to obtain step‐growth monomers. Polymerization via thiol‐ene reaction or polycondensation with diphenyl carbonate gives diversely substituted polyurethanes or alternating polyurethane‐polycarbonates, respectively. Furthermore, the application of 1,12‐diaminododecane and 1,6‐diisocyanohexane as bifunctional components in the Ugi‐5CC directly results in the corresponding polyamide bearing methyl carbamate side chains ( = 19 850 g mol⁻¹). The latter polymer is further converted into the corresponding polyhydantoin in a highly straightforward fashion.

     

Rational design of methacrylate monomers containing oxadiazole moieties for single‐layer organic light emitting devices

Methacrylate derived monomers functionalized with pendant oxadiazole moieties were synthesized and copolymerized with carbazole containing monomers to form polymers with electron and hole transporting fragments in the same molecule. Substituents on the oxidazole moiety were varied with the purpose of bandgap tuning and performance optimization when employed in single‐layer organic light emitting devices (OLED). Quantum mechanical calculations of the HOMO‐LUMO levels of the oxidazole derivatives were used to down‐select promising candidates for chemical synthesis and testing in single‐layer OLEDs. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1663–1673     

Synthesis of polymers possessing tetraphenylethylene units by three‐component coupling reactions of poly(p‐phenylene ethynylene) derivative with aryl halides and phenylboronic acid

A derivative of poly(p‐phenylene ethynylene) was subjected to the palladium‐catalyzed three‐component coupling reactions with aryl halides and phenylboronic acid to obtain polymers having tetrasubstituted cis‐vinylene units. For example, 69% of the acetylene units in the prepolymer were converted to cis‐vinylene (i.e., tetrasubstituted cis‐vinylene) units using iodobenzene and phenylboronic acid (5 equiv each with respect to acetylene units). In the UV–vis absorption spectra of the resulting polymers, clear hypsochromic shifts of the absorption maxima were observed, while bathochromic shifts and suppression of the efficiency were observed in their photoluminescence spectra. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 787–791     

Synthesis and characterization of hyperbranched amphiphilic block copolymers prepared via self‐condensing RAFT polymerization

Four families of hyperbranched amphiphilic block copolymers of styrene (Sty, less polar monomer) and 2‐vinylpyridine (2VPy, one of the two more polar monomers) or 4‐vinylpyridine (4VPy, the other polar monomer) were prepared via self‐condensing vinyl reversible addition‐fragmentation chain transfer polymerization (SCVP‐RAFT). Two families contained 4VPy as the more polar monomer, one of which possessing a Sty‐b‐4VPy architecture, and the other possessing the reverse block architecture. The other two families bore 2VPy as the more polar monomer and had either a 2VPy‐b‐Sty or a Sty‐b‐2VPy architecture. Characterization of the hyperbranched block copolymers in terms of their molecular weights and compositions indicated better control when the VPy monomers were polymerized first. Control over the molecular weights of the hyperbranched copolymers was also confirmed with the aminolysis of the dithioester moiety at the branching points to produce linear polymers with number‐average molecular weights slightly greater than the theoretically expected ones, due to recombination of the resulting thiol‐terminated linear polymers. The amphiphilicity of the hyperbranched copolymers led to their self‐assembly in selective solvents, which was probed using atomic force microscopy and dynamic light scattering, which indicated the formation of large spherical micelles of uniform diameter. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1310–1319     

Synthesis and characterization of a series of diverse poly(2‐oxazoline)s

This article describes the synthesis and characterization of a variety of new poly(2‐oxazoline)s. With regard to functional polymers, 2‐oxazolines represent an interesting class of monomers because of the easy variation of the substituent in 2‐position. Starting from the corresponding nitriles, different 2‐oxazolines were obtained containing a diverse set of 2‐substituents, including thioether bonds ( M11 ), trifluoromethyl groups ( M8 , M10 ), and alkyl‐ or aryl groups ( M1 – M7 ). The subsequent polymerization of the majority of these monomers proceeded in a living manner, which was demonstrated by linear first‐order kinetics, a linear increase of molar mass with conversion, and relatively narrow molar mass distributions. In addition, selected thermal and surface properties of the polymers were studied utilizing DSC and contact‐angle measurements to determine the effects of different 2‐substituents on the macroscopic properties. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3829–3838, 2009