Synthesis and helical properties of N‐substituted p‐benzamide random copolymers possessing chiral/achiral and (S)/(R) side chains

Random copolymers of poly(p‐benzamide)s having a methyl‐substituted tri(ethylene glycol) unit as a chiral side chain and a nonsubstituted tri(ethylene glycol) or branching alkyl unit as an achiral side chain were synthesized by copolymerization of N‐substituted 4‐aminobenzoic acid ester monomers with a base in the presence of an initiator. Copolymerizations of the chiral (S)‐monomer with N‐tri(ethylene glycol) achiral monomer and with the racemic monomer were carried out by the addition of a mixture of two monomers and an initiator to a solution of a base all at once, affording the corresponding random copolymers. On the other hand, random copolymerization of the chiral monomer with monomer having an achiral branching alkyl side chain required dropwise addition of the achiral monomer to a mixture of the chiral monomer, the initiator, and the base. These copolymers formed helical structures, but analysis of the CD spectra indicated the absence of cooperativity between the monomer units along the copolymers. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis of a variety of star‐shaped polybenzamides via chain‐growth condensation polymerization with tetrafunctional porphyrin initiator

A variety of well‐defined tetra‐armed star‐shaped poly(N‐substituted p‐benzamide)s, including block poly(p‐benzamide)s with different N‐substituents, and poly(N‐substituted m‐benzamide)s, were synthesized by using porphyrin‐cored tetra‐functional initiator 2 under optimized polymerization conditions. The initiator 2 allowed discrimination of the target star polymer from concomitantly formed linear polymer by‐products by means of GPC with UV detection, and the polymerization conditions were easily optimized for selective synthesis of the star polybenzamides. Star‐shaped poly(p‐benzamide) with tri(ethylene glycol) monomethyl ether (TEG) side chain was selectively obtained by polymerization of phenyl 4‐{2‐[2‐(2‐methoxyethoxy)ethoxy]ethylamino}benzoate ( 1b ′) with 2 at ?10 °C in the case of [ 1b ′]₀/[ 2 ]₀ = 40 and at 0 °C in the case of [ 1b ′]₀/[ 2 ]₀ = 80. Star‐shaped poly(p‐benzamide) with 4‐(octyloxy)benzyl (OOB) substituent was obtained only when methyl 4‐[4‐(octyloxy)benzylamino]benzoate ( 1c ) was polymerized at 25 °C at [ 1c ]₀/[ 2 ]₀ = 20. On the other hand, star‐shaped poly(m‐benzamide)s with N‐butyl, N‐octyl, and N‐TEG side chains were able to be synthesized by polymerization of the corresponding meta‐substituted aminobenzoic acid alkyl ester monomers 3 at 0 °C until the ratio of [ 3 ]₀/[ 2 ]₀ reached 80. However, star‐shaped poly(m‐benzamide)s with the OOB group were contaminated with linear polymer even when the feed ratio of the monomer 3d to 2 was 20. The UV–visible spectrum of an aqueous solution of star‐shaped poly(p‐benzamide) with TEG side chain indicated that the hydrophobic porphyrin core was aggregated. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Multicolor single‐layer electroluminescence device using poly(L‐glutamate) for hole transport

Helical poly(L ‐glutamate) with carbazole (Cz) side chains (PCELG) was synthesized as a hole‐transport host material for a dye‐doped polymer electroluminescence (EL) device. The main‐ and side‐chain conformations were investigated by a combination of polarized infrared spectroscopy and semiempirical quantum chemical calculation. In an electrically poled PCELG crystalline film, the main chain was found to assume a right‐handed α‐helical conformation with an order parameter of ～0.8. The Cz plane at the terminal side chain is inclined by about 44° toward the helical axis, creating a regular stacked structure conforming to the rigid α‐helical backbone. The principal EL characteristics of these devices were determined and compared with those of devices made with poly(N‐vinyl carbazole) (PVCz). For green and blue light, EL devices using PCELG exhibited luminance efficiencies comparable to those using PVCz. To the best of our knowledge, this was the first demonstration of primary colors emitted by an organic EL device with a polypeptide hole‐transport host material. The experimental results suggested that the total concentration and spatial arrangement of the Cz groups play an important role in determining the EL characteristics of dye‐doped polymer EL devices. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 496–502, 2010     

Recyclable helical poly(phenylacetylene)‐supported catalyst for asymmetric aldol reaction in aqueous media

A novel one‐handed helical poly(phenylacetylene) bearing L‐hydroxyproline pendants (poly(PA‐P)) was synthesized as an eco‐friendly polymer‐supported catalyst for asymmetric reactions. The helical poly(PA‐P) catalyzed the asymmetric aldol reactions of cyclohexanone with p‐nitrobenzaldehyde, and showed good recyclability and higher enantiomeric excess (ee) in aqueous medias than that in organic medias. The one‐handed helicity of poly(PA‐P) was clearly affected by the water content in the aqueous media. The helical poly(PA‐P) showed the higher enantioselectivity (ee = 99%) than its monomer PA‐P (ee = 54%) in THF/H₂O (H₂O vol % = 25.0 vol %). After the one‐handed helical structure of poly(PA‐P) was destroyed by grinding treatment, the ee of the reaction clearly decreased from 99 to 49%. These indicate that the one‐handed helical structure of poly(PA‐P) played an important role in the high enantioselectivity of the asymmetric aldol reactions in the aqueous media. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 1024–1031     

Helical poly(phenylacetylene) derived from L‐tyrosine: A promising candidate for functional helical polymers carrying transformable N‐ and C‐termini

A novel optically active phenylacetylene derivative, N‐(tert‐butoxycarbonyl)‐4‐ethynyl‐L ‐phenylalanine methyl ester ( 1 ), was synthesized from L ‐tyrosine and polymerized with a rhodium catalyst. The corresponding polymer [poly( 1 )] with a moderate molecular weight was obtained in a high yield. The alkaline hydrolysis of poly( 1 ) gave poly[N‐(tert‐butoxycarbonyl)‐4‐ethynyl‐L ‐phenylalanine] [poly( 2 )] carrying free carboxy groups. Polarimetric, CD, and UV–vis spectroscopy analyses revealed that poly( 1 ) took a predominantly one‐handed helical structure in MeOH and toluene, and poly( 2 ) took a helical structure in MeOH. The secondary structures of poly( 1 ) and poly( 2 ) could be tuned with heat and solvents. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1691–1698, 2007     

Chiral oxazoline substituted optically active poly(m‐phenylene)s: Synthesis and coupling polymerizations of (S)‐4‐benzyl‐2‐(3,5‐dihalidephenyl) oxazoline using transition metal catalysts

Optically active poly(m‐phenylene)s substituted with chiral oxazoline derivatives have been synthesized by the nickel‐catalyzed Yamamoto coupling reaction of optically active (S)‐4‐benzyl‐2‐(3,5‐dihalidephenyl)oxazoline derivatives (X = Br or I). The structures and chiroptical properties of the polymers were characterized by spectroscopic methods and thermal gravimetric analyses. The polymers showed higher absolute optical specific rotation values than their corresponding monomer, and showed a Cotton effect at transition region of conjugated main chain. The optical activities of the polymers should be attributed to the higher order structure such as helical conformations. Moreover, the helical conformation could be induced by addition of metal salts into polymer solutions. The polymers showed good thermal stabilities, which was attributable to the oxazoline side chains. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis and photoisomerization of poly(1‐methylpropargyl ester)s carrying azobenzene moieties

Optically active 1‐methylpropargyl esters bearing azobenzene groups, namely, (S)‐(?)‐3‐methyl‐3‐{4‐[4‐(n‐butyloxy)phenylazophenyl]carbonyl}oxy‐1‐propyne ( 1 ), (S)‐(?)‐3‐methyl‐3‐{4‐[4‐(n‐hexyloxy)phenylazophenyl]carbonyl}oxy‐1‐propyne ( 2 ), and (S)‐(?)‐3‐methyl‐3‐{4‐[4‐(n‐octyloxy)phenylazophenyl]carbonyl}oxy‐1‐propyne ( 3 ) were synthesized and polymerized with Rh⁺(nbd)[η⁶‐C₆H₅B^?(C₆H₅)₃] (nbd, norbornadiene) as a catalyst to afford the corresponding poly(1‐methyloropargyl ester)s with moderate molecular weights (M_n = 24,000–31,300) in good yields (79–84%). Polymers were soluble in common organic solvents including toluene, CHCl₃, CH₂Cl₂, THF, and DMSO, whereas insoluble in diethyl ether, n‐hexane, and methanol. Large optical rotations and strong CD signals demonstrated that all the polymers take a helical structure with a predominantly one‐handed screw sense. The helical structure of the polymers changed with the addition of MeOH and heat. The trans‐azobenzene of the polymer side chains isomerized into cis on UV irradiation, which was accompanied with drastic helical conformational changes of the polymer backbone. The cis‐azobenzene moiety reisomerized into trans on visible‐light irradiation, which induced the recovery of chiral geometry of azobenzene moieties in the side chain. Conformational analysis revealed that the polymers form a tightly twisted right‐handed helical structure with a dihedral angle of 70° at the single bond of the main chain. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4749–4761, 2009     

Grafting polymerization of single‐handed helical poly(phenyl isocyanide)s on graphene oxide and their application in enantioselective separation

We herein report a “grafting from” strategy to immobilize optically active helical poly(phenyl isocyanide)s onto graphene oxide (GO) nanosheets. After covalently bounding alkyne‐Pd(II) initiator onto GO nanosheets, the designed GO/polymer composites P1 @GO and P1 ‐b‐ P2 @GO featuring single‐handed helical poly(phenyl isocyanide)s growing from GO nanosheets were prepared by sequential addition of the chiral and achiral isocyanide monomers. Post‐synthetic hydrolysis rendered P1 ‐b‐ P3 @GO to improve the hydrophilicity. The successful covalent bonding of poly(phenyl isocyanide)s chains onto GO nanosheets was certified by several cross evidences including scan emission microscopy, atomic force microscopy, Raman spectroscopy, X‐ray photoelectron spectroscopy, and thermogravimetric analysis. Circular dichroism spectra proved that the chiral information was introduced through the grafted single‐handed helical polymer chains successfully. In addition, the resulting GO/polymer composites were explored as a chiral additive to induce enantioselective crystallization of racemic organic molecules. Preferential formation of rod‐like L‐alanine crystals was induced by composites bearing right‐handed helical poly(phenyl isocyanide)s. The enantiomeric excess value of the induced crystals reached 76%, displaying the potential in future applications. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2092–2103     

Synthesis of well‐defined,soluble poly(3‐alkyl‐4‐benzamide) by chain‐growth condensation polymerization

Well‐defined poly(3‐alkyl‐4‐benzamide) was synthesized by means of chain‐growth condensation polymerization of phenyl 3‐octyl‐4‐(4‐octyloxybenzyl(OOB)amino)benzoate ( 1c ) from initiator 2 , followed by removal of the OOB groups on amide nitrogen of poly 1c . Polymerization of 1c with phenyl 4‐(trifluoromethyl)benzoate ( 2b ) in the presence of 1,1,1,3,3,3‐hexamethyldisilazide (LiHMDS) and LiCl in THF at ?10 °C gave poly 1c with a narrow molecular weight distribution (M_w/M_n ≤ 1.08) and a well‐defined molecular weight (M_n = 4480–12,700) determined by the feed ratio of monomer to initiator (from 10 to 30). The OOB groups of poly 1c were removed with H₂SO₄ to give the corresponding N‐unsubstituted poly(p‐benzamide) (poly 1c′ ) with low polydispersity. The solublity of poly 1c′ in polar organic solvents was dramatically higher than that of poly(p‐benzamide), demonstrating that introduction of an alkyl group on the aromatic ring is very effective for improving the solubility of poly(p‐benzamide). © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 360–365     

A photo‐degradable helix: Synthesis,structure, and photolysis of optically active poly[2,7‐bis(4‐t‐butylphenyl)‐9‐methylfluoren‐9‐yl acrylate]

2,7‐Bis(4‐t‐butylphenyl)‐9‐methylfluoren‐9‐yl acrylate ( BBPMFA ) was synthesized and polymerized using α,α′‐azobisisobutyronitrile or n‐Bu₃B‐air as a radical initiator and using the complex of 9‐fluorenyllithium with (S)‐(+)‐1‐(2‐pyrrolidinylmethyl)pyrrolidine as an optically active anionic initiator. Although the radical polymerization led to rather low‐molecular‐weight products at low yields, the anionic polymerization afforded polymers with higher molecular weights in higher yields. The poly( BBPMFA ) obtained by the anionic polymerization was slightly rich in isotacticity (meso diad 57%) and showed an intense circular dichroism (CD) spectrum and large dextrorotation. The intensity of the CD spectrum and magnitude of optical activity increased with an increase in M_n, suggesting that the polymer possesses a preferred‐handed helical conformation. The CD spectrum disappeared within 1 s on irradiation to the polymer in a CHCl₃ solution using a 500‐W Hg‐Xe lamp. This was ascribed to fast photolysis of the ester linkage leading to a loss of helical conformation of the entire chain. Photolysis products of poly( BBPMFA ) were poly(acrylic acid) and 2,7‐bis(4‐t‐butylphenyl)‐9‐methylenefluorene (2,7‐bis(4‐t‐butylphenyl)dibenzofulvene). The photolysis reaction seemed to proceed through the “unzipping” mechanism. The rate constant of photolysis of poly( BBPMFA ) under irradiation at monochromated 325 nm was around 0.01 s^?1 independent of molecular weight. Photolysis at 325 nm was approximately 2400 times faster than that for chemical ester solvolysis under a neutral condition in the dark. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis,Characterization, and thermoresponsive properties of Helical Polypeptides Derivatized from Poly(γ−4‐(3‐chloropropoxycarbonyl)benzyl‐L‐glutamate)

A series of side‐chain‐functionalized α‐helical polypeptides, i.e., poly(γ‐4‐(3‐chloropropoxycarbonyl)benzyl‐_L‐glutamate) (6) have been prepared from n‐butylamine initiated ring‐opening polymerization (ROP) of γ‐4‐(3‐chloropropoxycarbonyl)benzyl‐_L‐glutamic acid‐based N‐carboxyanhydride. Polypeptides bearing oligo‐ethylene‐glycol (OEG) groups or 1‐butylimidazolium salts were prepared from 6 via copper‐mediated [2+3] alkyne‐azide 1,3‐dipolar cycloaddition or nuleophilic substitution, respectively. CD and FTIR analysis revealed that the polymers adopt α‐helical conformations both in solution and the solid state. Polymers bearing OEG (m = 3) side‐chains showed reversible LCST‐type phase transition behaviors in water while polymers bearing 1‐butylimidazolium and I^? counter‐anions exhibited reversible UCST‐type transitions in water. Variable‐temperature UV‐vis analysis revealed that the phase transition temperatures (T_pts) were dependent on the main‐chain length and polymeric concentration. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2469–2480     

Homo‐double helix formation of an optically active conjugated polymer bearing carboxy groups and amplification of the helicity upon complexation with achiral and chiral amines

An optically active, m‐terphenyl‐based π‐conjugated polymer bearing carboxy groups was synthesized by the copolymerization of the diethynyl monomer bearing a carboxy group with (S,S)‐2,5‐bis(2‐methylbutoxy)‐1,4‐dibromobenzene using Sonogashira reaction. The copolymer showed a weak circular dichroism (CD) in the main‐chain chromophore region due to a homo‐double helix formation with an excess helical handedness biased by the chiral alkoxy substituents through self‐association. However, upon complexation with achiral amines, such as piperidine, the CD intensity of the polymer significantly increased resulting in the formation of a greater excess one‐handed homo‐double helix via hydrogen‐bonded inclusion complexation with the achiral amines between each strand, leading to the amplification of the helicity. A preferred‐handed homo‐double helix was also induced in the polymer in the presence of nonracemic amines. The effect of the achiral and chiral amines on the homo‐double helix formation was investigated by comparing the CD spectra of the polymer to those of its model dimer. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 990–999     

Metal‐cation‐induced chiroptical switching for poly(phenylacetylene) bearing a macromolecular ionophore as a graft chain

A poly(phenylacetylene) bearing a polycarbohydrate ionophore as a graft chain (copolymer 4 ) was synthesized by the copolymerization of end‐functionalized (1→6)‐2,5‐anhydro‐3,4‐di‐O‐ethyl‐D ‐glucitol with a 4‐ethynylbenzoyl group (macromonomer 2 ) with phenylacetylene. Copolymer 4 showed a split‐type circular dichroism (CD) in the long absorption region of the conjugated polymer backbone (280–500 nm), and the CD pattern varied in response to external stimuli, such as the solvents and temperature. This suggested that 4 had a predominantly one‐handed helical conformation in the polyacetylene backbone. The CD pattern of 4 was completely inverted by the formation of a complex between the macromolecular ionophore units and the selected metal cations, that is, Ba²⁺, Pb²⁺, Sr²⁺, Na⁺, and Li⁺. This suggested that copolymer 4 underwent a helix–helix transition through the host–guest complexation with achiral inorganic metal cations. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5855–5863, 2005     

Chirality sensing of chiral pyrrolidines and piperazines with a liquid crystalline dynamic helical poly(phenylacetylene) bearing ethyl phosphonate pendant groups

Stereoregular cis‐transoidal poly(phenylacetylene) bearing a phosphonic acid monoethyl ester as the pendant group (poly‐ 1 ‐H) was found to form a preferred‐handed helix upon complexation with various optically active pyrrolidines and piperazines in dilute dimethyl sulfoxide and water, and the complexes exhibited characteristic induced circular dichroisms (ICDs) in the UV‐vis region of the polymer backbone. The Cotton effect signs in water reflect the absolute configuration of the pyrrolidines. The sodium salt of poly‐ 1 ‐H (poly‐ 1 ‐Na) and poly‐ 1 ‐H in the presence of optically active amines formed lyotropic nematic and cholesteric liquid crystalline phases in concentrated water solutions, respectively, indicating the rigid‐rod characteristic of the polymer main chain regardless of the lack of a single‐handed helix, as evidenced by the long persistence length of about 18 nm before and after the preferred‐handed helicity induction in the polymer. X‐ray diffraction of the oriented films of the nematic and cholesteric liquid crystalline polymers exhibited almost the same diffraction pattern, suggesting that both polymers have the same helical structure; dynamically racemic and one‐handed helices, respectively. On the basis of the X‐ray analysis, a possible helical structure of poly‐ 1 is proposed. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1383–1390, 2010     

Chiral discrimination of a helically organized crown ether array parallel to the helix axis of polyisocyanate

The asymmetric polymerization of 4′‐isocyanatobenzo‐18‐crown‐6 with the lithium amide of (S)‐(2‐methoxymethyl)pyrrolidine successfully proceeded to afford end‐functionalized poly(4′‐isocyanatobenzo‐18‐crown‐6) with (S)‐(2‐methoxymethyl)pyrrolidine (polymer 2 ). In the circular dichroism (CD) spectrum of 2 , a clear positive Cotton effect was observed in the range of 240–350 nm corresponding to the absorption of the polymer backbone, indicating that 2 partially formed a one‐handed helical structure, which was preserved by the chirality of (S)‐(2‐methoxymethyl)pyrrolidine bonding to the terminal end in 2 . In the titration experiments for the CD intensity of 2 in the presence of D ‐ and L ‐Phe·HClO₄ (where Phe is phenylalanine), a small but remarkable difference was observed in the amount of the chiral guest needed for saturation of the CD intensity and in the saturated CD intensity, indicating that the extremely stable, one‐handed helical part should exist in the main chain of 2 , which was not inverted even when the unfavorable chiral guest for the predominant helical sense, L ‐Phe·HClO₄, was added. In addition, helical polymer 2 exhibited a chiral discrimination ability toward racemic guests; that is, the guests were extracted from the aqueous phase into the organic phase with enantiomeric excess. The driving force of the chiral discrimination ability of 2 should certainly be attributed to the one‐handed helical structure in 2 . © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 325–334, 2006     

Helicity induction on a poly(phenylacetylene) derivative bearing aza‐18‐crown‐6 ether pendants in water

A stereoregular poly(phenylacetylene) bearing the bulky aza‐18‐crown‐6 ether as the pendant (poly‐ 1 ) formed a predominantly one‐handed helical conformation upon complexation with various chiral compounds, such as amino acids, peptides, aminosugars, amines, and amino alcohols in water. The complexes exhibited an induced circular dichroism (ICD) in the UV–visible region of the polymer main chain. Therefore, poly‐ 1 can be used as a novel probe for determining the chirality of chiral compounds in water. The assay of 19 common free L ‐amino acids gave the same ICD sign at 0 °C except for L ‐phenylalanine. The effects of pH, temperature, guest concentration, and organic solvent content on the ICD during the complexation of poly‐ 1 with chiral compounds were also investigated. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1004–1013, 2003     

Synthesis and UCST‐type phase behavior of OEGylated poly(γ‐benzyl‐l‐glutamate) in organic media

A series of OEGylated poly(γ‐benzyl‐l ‐glutamate) with different oligo‐ethylene‐glycol side‐chain length, molecular weight (MW = 8.4 × 10³ to 13.5 × 10⁴) and narrow molecular weight distribution (PDI = 1.12–1.19) can be readily prepared from triethylamine initiated ring‐opening polymerization of OEGylated γ‐benzyl‐l ‐glutamic acid based N‐carboxyanhydride. FTIR analysis revealed that the polymers adopted α‐helical conformation in the solid‐state. While they showed poor solubility in water, they exhibited a reversible upper critical solution temperature (UCST)‐type phase behavior in various alcoholic organic solvents (i.e., methanol, ethanol, 1‐propanol, 1‐butanol, 1‐pentanol, and isopropanol). Variable‐temperature UV–vis analysis revealed that the UCST‐type transition temperatures (T_pts) of the resulting polymers were highly dependent on the type of solvent, polymer concentration, side‐ and main‐chain length. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1348‐1356     

pH‐ and β‐cyclodextrin‐responsive micelles based on polyaspartamide derivatives as drug carrier

A novel kind of graft polymer poly(aspartic acid)‐ethanediamine‐g‐adamantane/methyloxy polyethylene glycol (Pasp‐EDA‐g‐Ad/mPEG) was designed and synthesized for drug delivery in this study. The chemical structure of the prepared polymer was confirmed by proton NMR. The obtained polymer can self‐assemble into micelles which were stable under a physiological environment and displayed pH‐ and β‐cyclodextrin (β‐CD)‐responsive behaviors because of the acid‐labile benzoic imine linkage and hydrophobic adamantine groups in the side chains of the polymer. The doxorubicin (Dox)‐loaded micelles showed a slow release under physiological conditions and a rapid release after exposure to weakly acidic or β‐CD environment. The in vitro cytotoxicity results suggested that the polymer was good at biocompatibility and could remain Dox biologically active. Hence, the Pasp‐EDA‐g‐Ad/mPEG micelles may be applied as promising controlled drug delivery system for hydrophobic antitumor drugs. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1387–1395     

Three‐Way‐Switchable (Right/Left/OFF) Selective Reflection of Circularly Polarized Light on Solid Thin Films of Helical Polymer Blends

Two poly(quinoxaline‐2,3‐diyl) copolymers bearing miscibility‐enhancing 8‐chlorooctyloxy and (S)‐2‐methylbutoxy or n‐butoxy side chains were synthesized. After annealing in CHCl₃ vapor, a polymer‐blend film of these copolymers exhibited selective reflection of right‐handed circularly polarized light (CPL) in the visible region. The handedness of the CPL reflected was completely inverted upon annealing of the film in THF vapor. Annealing in n‐hexane vapor resulted in the phase separation of the polymer blend, which turned the selective reflection off. This three‐way‐switchable reflection, that is, reflection of right‐handed or left‐handed CPL, together with an OFF state, could be observed visually through right‐ and left‐handed CPL filters.     

Synthesis of comb‐like polystyrene with poly(N‐phenyl maleimide‐alt‐p‐chloromethyl styrene) as macroinitiator

The copolymerization of N‐phenyl maleimide and p‐chloromethyl styrene via reversible addition–fragmentation chain transfer (RAFT) process with AIBN as initiator and 2‐(ethoxycarbonyl)prop‐2‐yl dithiobenzoate as RAFT agent produced copolymers with alternating structure, controlled molecular weights, and narrow molecular weight distributions. Using poly(N‐phenyl maleimide‐alt‐p‐chloromethyl styrene) as the macroinitiator for atom transfer radical polymerization of styrene in the presence of CuCl/2,2′‐bipyridine, well‐defined comb‐like polymers with one graft chain for every two monomer units of backbone polymer were obtained. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2069–2075, 2006