Copolymerization of ethylene and α‐olefins with combined metallocene catalysts. I. A formal criterion for molecular weight bimodality

Metallocene and other single‐site catalysts can be combined to produce polyolefins with broadened distributions of molecular weight, chemical composition, and long‐chain branching. These resins are finding increasing applications because of their enhanced properties compared to ones made with conventional Ziegler–Natta catalysts. Resins with bimodal molecular weight distributions (MWDs) have especially attractive mechanical and rheological properties. Although the use of these resins is expected to increase, there are very few studies available to quantify MWD bimodality or to decide a priori which combinations of metallocene catalysts will lead to the formation of polyolefins with bimodal MWDs. In this article, a necessary condition for the production of polymer with bimodal MWD using two single‐site‐type catalysts is derived. Additionally, a bimodality index is defined to quantify MWD bimodality. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1408–1416, 2000     

Hydrogen effects in propylene polymerization reactions with titanium‐based Ziegler–Natta catalysts. II. Mechanism of the chain‐transfer reaction

Hydrogen is a very effective chain‐transfer agent in propylene polymerization reactions with Ti‐based Ziegler–Natta catalysts. However, measurements of the hydrogen concentration effect on the molecular weight of polypropylene prepared with a supported TiCl₄/dibutyl phthalate/MgCl₂ catalyst show a peculiar effect: hydrogen efficiency in the chain transfer significantly decreases with concentration, and at very high concentrations, hydrogen no longer affects the molecular weight of polypropylene. A detailed analysis of kinetic features of chain‐transfer reactions for different types of active centers in the catalyst suggests that chain transfer with hydrogen is not merely the hydrogenolysis reaction of the Ti? C bond in an active center but proceeds with the participation of a coordinated propylene molecule. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1899–1911, 2002     

Ethylene polymerization with porous polystyrene spheres supported Cp2ZrCl2 catalyst

A catalyst with porous polystyrene beads supported Cp₂ZrCl₂ was prepared and tested for ethylene polymerization with methylaluminoxane as a cocatalyst. By comparison, the porous supported catalyst maintained higher activity and produced polyethylene with better morphology than its corresponding solid supported catalyst. The differences between activities of the catalysts and morphologies of the products were reasonably explained by the fragmentation processes of support as frequently observed with the inorganic supported Ziegler–Natta catalysts. Investigation into the distribution of polystyrene in the polyethylene revealed the fact that the porous polystyrene supported catalyst had undergone fragmentation during polymerization. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3313–3319, 2003     

AlR2Cl/MgR2 combinations as universal cocatalysts for Ziegler–Natta,metallocene, and post‐metallocene catalysts

Combinations of dialkylaluminum chlorides and dialkylmagnesium compounds, when used at molar [AlR₂Cl]:[MgR₂] ratios ≥ 2, act as universal cocatalysts for all three presently known types of alkene polymerization catalysts—Ziegler–Natta, metallocene, and post‐metallocene. When these cocatalysts are used with supported Ti‐based Ziegler–Natta catalysts, they produce catalyst systems which are 1.5–2 times more active than the systems utilizing AlR₃ compounds as cocatalysts. Combinations of AlR₂Cl/MgR₂ cocatalysts and various metallocene complexes produce single‐center catalyst systems similar to those formed in the presence of MAO. The same cocatalysts activate numerous post‐metallocene Ti complexes containing bidentate ligands of a different nature and produce multicenter systems of very high activity. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3271–3285, 2009     

Manganese‐based transition metal complexes as new catalysts for olefin polymerizations

Three manganese complexes, Mn(acac)₃ (acac = acetylacetonate), Cp₂Mn (Cp = cyclopentadienyl), and Mn(salen)Cl [salen = 1,2‐cyclohexanediamino‐N,N′‐bis(3,5‐dit‐butyl‐salicylidene)], were used for ethylene and propylene polymerizations. These complexes, in combination with an alkylaluminum cocatalyst such as methylaluminoxane (MAO) or diethyl aluminum chloride (AlEt₂Cl), could promote ethylene polymerizations that yielded extremely high molecular weight linear polymers, but were inactive for propylene polymerizations. The counterparts supported on MgCl₂ showed activities even for propylene polymerizations and had remarkably enhanced activities for ethylene polymerizations. In the presence of an electron donor such as ethylbenzoate, the MgCl₂‐supported manganese‐based catalysts yielded a highly isotactic polypropylene with a high molecular weight. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3733–3738, 2001     

Propylene polymerization reactions with supported Ziegler–Natta catalysts: Observing polymer material produced by a single active center

Medium‐ and high‐resolution SEM analysis of several Ti‐based MgCl₂‐supported Ziegler–Natta catalysts and isotactic polypropylene produced with them is carried out. Each catalyst particle, 35–55 μ in size, produces one polymer particle with an average size of 1.5–2 mm, which replicates the shape of the catalyst particle. Polymer particles contain two distinct morphological features. The larger of them are globules with D_av ～400 nm; from 1 to 2 × 10¹¹ globules per particle. Each globule represents the combined polymer output of a single active center. The globules consist of ～2500 microglobules with an average size of ～20 nm. The microglobules contain several folded polymer molecules; they are the smallest thermodynamically stable macromolecular ensembles in propylene polymerization reactions. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3832–3841     

Kinetic features of ethylene polymerization over supported catalysts [2,6‐bis(imino)pyridyl iron dichloride/magnesium dichloride] with AlR3 as an activator

The effects of polymerization temperature, polymerization time, ethylene and hydrogen concentration, and effect of comonomers (hexene‐1, propylene) on the activity of supported catalyst of composition LFeCl₂/MgCl₂‐Al(i‐Bu)₃ (L = 2,6‐bis[1‐(2,6‐dimethylphenylimino)ethyl] pyridyl) and polymer characteristics (molecular weight (MW), molecular‐weight distribution (MWD), molecular structure) have been studied. Effective activation energy of ethylene polymerization over LFeCl₂/MgCl₂‐Al(i‐Bu)₃ has a value typical of supported Ziegler–Natta catalysts (11.9 kcal/mol). The polymerization reaction is of the first order with respect to monomer at the ethylene concentration >0.2 mol/L. Addition of small amounts of hydrogen (9–17%) significantly increases the activity; however, further increase in hydrogen concentration decreases the activity. The IRS and DSC analysis of PE indicates that catalyst LFeCl₂/MgCl₂‐Al(i‐Bu)₃ has a very low copolymerizing ability toward propylene and hexene‐1. MW and MWD of PE produced over these catalysts depend on the polymerization time, ethylene and hexene‐1 concentration. The activation effect of hydrogen and other kinetic features of ethylene polymerization over supported catalysts based on the Fe (II) complexes are discussed. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5057–5066, 2007     

Synthesis of polypropylene-co-p-methylstyrene copolymers by metallocene and Ziegler–Natta catalysts

This paper discusses the copolymerization reaction of propylene and p-methylstyrene (p-MS) via four of the best-known isospecific catalysts, including two homogeneous metallocene catalysts, namely, {SiMe₂[2-Me-4-Ph(Ind)]₂}ZrCl₂ and Et(Ind)₂ZrCl₂, and two heterogeneous Ziegler–Natta catalysts, namely, MgCl₂/TiCl₄/electron donor (ED)/AlEt₃ and TiCl₃. AA/Et₂AlCl. By comparing the experimental results, metallocene catalysts show no advantage over Ziegler–Natta catalysts. The combination of steric jamming during the consective insertion of 2,1-inserted p-MS and 1,2-inserted propylene (k₂₁ reaction) and the lack of p-MS homopolymerization (k₂₂ reaction) in the metallocene coordination mechanism drastically reduces catalyst activity and polymer molecular weight. On the other hand, the Ziegler–Natta heterogeneous catalyst proceeding with 1,2-specific insertion manner for both monomers shows no retardation because of the p-MS comonomer. Specifically, the supported MgCl₂/TiCl₄/ED/AlEt₃ catalyst, which contains an internal ED, produces copolymers with high molecular weight, high melting point, and no p-MS homopolymer. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2795–2802, 1999     

Effects of external donors and hydrogen concentration on oligomer formation and chain end distribution in propylene polymerization with Ziegler‐Natta catalysts

The effect of type and concentration of external donor and hydrogen concentration on oligomer formation and chain end distribution were studied. Bulk polymerization of propylene was carried out with two different Ziegler‐Natta catalysts at 70 °C, one a novel self‐supported catalyst (A) and the other a conventional MgCl₂‐supported catalyst (B) with triethyl aluminum as cocatalyst. The external donors used were dicyclopentyl dimethoxy silane (DCP) and cyclohexylmethyl dimethoxy silane (CHM). The oligomer amount was shown to be strongly dependent on the molecular weight of the polymer. Catalyst A gave approximately 50 % lower oligomer content than catalyst B due to narrower molecular weight distribution in case of catalyst A. More n‐Bu‐terminated chain ends were found for catalyst A indicating more frequent 2,1 insertions. Catalyst A also gave more vinylidene‐terminated oligomers, suggesting that chain transfer to monomer, responsible for the vinylidene chain ends, was a more important chain termination mechanism for this catalyst, especially at low hydrogen concentration. Low site selectivity, due to low external donor concentration or use of a weak external donor (CHM), was also found to increase formation of vinylidene‐terminated oligomers. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 351–358, 2010     

Active center determinations on MgCl2‐supported fourth‐ and fifth‐generation Ziegler–Natta catalysts for propylene polymerization

Active center determinations on different Ziegler–Natta polypropylene catalysts, comprising MgCl₂, TiCl₄, and either a diether or a phthalate ester as internal donor, have been carried out by quenching propylene polymerization with tritiated ethanol, followed by radiochemical analysis of the resulting polymers. The purpose of this study was to determine the factors contributing to the high activities of the catalyst system MgCl₂/TiCl₄/diether—AlEt₃. Active center contents (C*) in the range 2–8% (of total Ti present) were measured and a strong correlation between catalyst activity and active center content was found, indicating that the high activity of the diether‐containing catalysts is due to an increased proportion of active centers rather than to a difference in propagation rate coefficients. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1635–1647, 2006     

A new route to atactic polypropylene: The second life of premetallocene homogeneous polymerization catalyst

Amorphous atactic polypropylene (PP) with an average molecular weight of 50,000–100,000 is produced by polymerizing propylene with a ternary Ti(Oiso‐Pr)₄ ‐ AlEt₂Cl/MgBu₂ catalyst at 30–50 °С. Main advantages of this catalyst compared with other catalysts capable of nearly exclusively producing atactic PP (such as some heterogeneous Ziegler‐Natta, metallocene and postmetallocene catalysts) are high activity, low cost and the ease of use: the catalyst is prepared in situ from three commercially available compounds readily soluble in aliphatic and aromatic hydrocarbons. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2124–2131     

Synthesis of polypropylene graft copolymers by the combination of a polypropylene copolymer containing pendant vinylbenzene groups and atom transfer radical polymerization

This article discusses a facile and inexpensive reaction process for preparing polypropylene‐based graft copolymers containing an isotactic polypropylene (i‐PP) main chain and several functional polymer side chains. The chemistry involves an i‐PP polymer precursor containing several pendant vinylbenzene groups, which is prepared through the Ziegler–Natta copolymerization of propylene and 1,4‐divinylbenzene mediated by an isospecific MgCl₂‐supported TiCl₄ catalyst. The selective monoenchainment of 1,4‐divinylbenzene comonomers results in pendant vinylbenzene groups quantitatively transformed into benzyl halides by hydrochlorination. In the presence of CuCl/pentamethyldiethylenetriamine, the in situ formed, multifunctional, polymeric atom transfer radical polymerization initiators carry out graft‐from polymerization through controlled radical polymerization. Some i‐PP‐based graft copolymers, including poly(propylene‐g‐methyl methacrylate) and poly(propylene‐g‐styrene), have been prepared with controlled compositions. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 429–437, 2005     

Synthesis of polyethylene with bimodal molecular weight distribution by supported iron‐based catalyst

Through immobilization of two iron‐based complexes, [((2,6‐MePh)N = C(Me))₂C₅H₃N]FeCl₂ ( 1 ) and [((2,6‐iPrPh)N = C(Me))₂C₅H₃N]FeCl₂ ( 2 ), on SiO₂ pretreated with tetraethylaluminoxane (TEAO), two supported iron‐based catalysts, 1 /TEAO/SiO₂ ( 3 ) and 2 /TEAO/SiO₂ ( 4 ), were prepared. These two supported catalysts 3 and 4 could be used to catalyze ethylene polymerization with moderate polymerization activity and prepare linear high‐density polyethylene with bimodal molecular weight distribution (MWD). It was demonstrated that immobilization of catalyst could significantly improve molecular weight (MW) of high‐MW fraction of the resultant polyethylene, as well as maintain bimodal MWD of polyethylene produced by the corresponding homogeneous catalysts. Such bimodal MWD of polyethylene produced by supported iron‐based catalysts could be well tailored by varying polymerization conditions, such as ethylene pressure and molar ratio of Al to Fe. It has been proven that TEAO is an efficient activator for both homogeneous and heterogeneous iron‐based catalysts for producing polyethylene with bimodal MWD. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5662–5669, 2004     

Optoeletronic properties of poly(N‐alkenyl‐carbazole)s driven by polymer stereoregularity

Stereoregular polymers like isotactic poly(N‐butenyl‐carbazole) (i‐PBK), isotactic and syndiotactic poly(N‐pentenyl‐carbazole) (i‐PPK and s‐PPK), and poly(N‐hexenyl‐carbazole) (i‐PHK and s‐PHK) are synthesized using the stereospecific homogeneous “single site” Ziegler‐Natta (Z‐N) catalysts: rac‐dimethylsilylbis(1‐indenyl)zirconium dichloride ( 1 )/methylaluminoxane (MAO) and diphenylmethylidene(cyclopentadienyl)‐(9‐fluorenyl)zirconium dichloride ( 2 )/MAO. Catalytic activity is rationalized by density functional theory (DFT) calculations. All synthesized polymers are fully characterized by NMR, thermal, wide‐angle X‐ray diffraction, and fourier transform infrared spectroscopy analysis. Fluorescence measurements on isotactic and syndiotactic polymer films indicate that all polymers give rise to excimers, both “sandwich‐like” and “partially overlapping.” Excimer formation is essentially driven by the polymer tacticity. Isotactic polymers generate both sandwich‐like and partially overlapping excimers, while syndiotactic polymers give rise especially to partially overlapping ones. A theoretical combined molecular dynamics–time dependent DFT approach is also used to support the experimental results. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 242–251     

Copolymerization of ethylene with 1‐hexene promoted by novel multi‐chelated non‐metallocene complexes with imine bridged imidazole ligand

A series of novel bridged multi‐chelated non‐metallocene catalysts is synthesized by the treatment of N,N‐imidazole, N,N‐dimethylimidazole, and N,N‐benzimidazole with n‐BuLi, 2,6‐dimethylaniline, and MCl₄ (M = Ti, Zr) in THF. These catalysts are used for copolymerization of ethylene with 1‐hexene after activated by methylaluminoxane (MAO). The effects of polymerization temperature, Al/M molar ratio, and pressure of monomer on ethylene copolymerization behaviors are investigated in detail. These results reveal that these catalysts are favorable for copolymerization of ethylene with 1‐hexene featured high catalytic activity and high comonomer incorporation. The copolymer is characterized by ¹³C NMR, WAXD, GPC, and DSC. The results confirm that the obtained copolymer features broad molecular weight distribution (MWD) about 33–35 and high 1‐hexene incorporation up to 9.2 mol %, melting temperature of the copolymer depends on the content of 1‐hexene incorporation within the copolymer chain and 1‐hexene unit in the copolymer chain isolates by ethylene units. The homopolymer of ethylene has broader MWD with 42–46. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 417–424, 2010     

Of Poisons and Antidotes in Polypropylene Catalysis

Quenched‐flow studies of MgCl₂‐supported Ziegler–Natta catalysts were combined for the first time with ¹³C NMR fingerprinting of the nascent polymer and conclusively proved that, depending on the catalyst formulation, propene polymerization can be slowed down significantly by the occurrence of the few regiodefects (2,1 monomer insertions), changing active sites into dormant sites. Catalysts modified with ethylbenzoate show little dormancy. The more industrially relevant phthalate based catalysts, instead, are highly dormant and require the presence of H₂ to counteract the deleterious effect of this self‐poisoning on productivity and stereoselectivity.     

无外给电子体的Ziegler-Natta丙烯聚合复相催化剂研究进展

从新型给电子体、催化剂性能、活性中心模型、催化和聚合机理研究及理论模拟这了无外给电子体的Ｚｉｅｇｌｅｒ－Ｎａｔｔａ丙烯聚合复相催化剂的研究进展。     

Dramatic decrease of the cis content and molecular weight of cis‐transoidal polyphenylacetylene at 23 °C in solutions prepared in air

The thermal cis–trans isomerization of cis‐transoidal polyphenylacetylene (PPA) synthesized with Noyori's catalyst [Rh(C?CPh)(norbornadiene)(PPh₃)₂] has been investigated under both ambient and inert atmospheres in solution and in bulk. In all cases, an intramolecular cyclization results in cis–trans isomerization, and subsequent chain cleavage produces 1,3,5‐triphenylbenzene. This reaction is accelerated by the presence of air, particularly when the reaction takes place in solution. Decreases in the cis content and molecular weight show that the intramolecular cyclization process takes place at 23 °C in solution. The mechanism of this reaction is identical to that reported previously for cis‐cisoidal and cis‐transoidal PPA synthesized with Ziegler–Natta catalysts. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3212–3220, 2002     

The discovery and progress of MgCl2‐supported TiCl4 catalysts

Polyolefins represented by polyethylene (PE) and polypropylene (PP) are indispensable materials in our daily lives. TiCl₃ catalysts, established by Ziegler and Natta in the 1950s, led to the births of the polyolefin industries. However, the activities and stereospecificities of the TiCl₃ catalysts were so low that steps for removing catalyst residues and low stereoregular PP were needed in the production of PE and PP. Our discovery of MgCl₂‐supported TiCl₄ catalysts led to more than 100 times higher activities and extremely high stereospecificities, which enabled us to dispense with the steps for the removals, meaning the process innovation. Furthermore, they narrowed the molecular weight and composition distributions of PE and PP, enabling us to control the polymer structures precisely and create such new products as very low density PE or heat‐sealable film at low temperature. The typical example of the product innovations by the combination of the high stereospecificity and the narrowed composition distribution is high‐performance impact copolymer used for an automobile bumper that used to be made of metal. These process and product innovations established these polyolefin industries. The latest MgCl₂‐supported TiCl₄ catalyst is very close to perfect control of isotactic PP structure and is expected to bring about further innovations. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1–8, 2004     

Hydrogen effects in propylene polymerization reactions with titanium‐based Ziegler–Natta catalysts. I. Chemical mechanism of catalyst activation

The hydrogen activation effect in propylene polymerization reactions with Ti‐based Ziegler–Natta catalysts is usually explained by hydrogenolysis of dormant active centers formed after secondary insertion of a propylene molecule into the growing polymer chain. This article proposes a different mechanism for the hydrogen activation effect due to hydrogenolysis of the Ti? iso‐C₃H₇ group. This group can be formed in two reactions: (1) after secondary propylene insertion into the Ti? H bond (which is generated after β‐hydrogen elimination in the growing polymer chain or after chain transfer with hydrogen), and (2) in the chain transfer with propylene if a propylene molecule is coordinated to the Ti atom in the secondary orientation. The Ti? CH(CH₃)₂ species is relatively stable, possibly because of the β‐agostic interaction between the H atom of one of its CH₃ groups and the Ti atom. The validity of this mechanism was demonstrated in a gas chromatography study of oligomers formed in ethylene/α‐olefin copolymerization reactions with δ‐TiCl₃/AlEt₃ and TiCl₄/dibutyl phthalate/MgCl₂–AlEt₃ catalysts. A quantitative analysis of gas chromatography data for ethylene/propylene co‐oligomers showed that the probability of secondary propylene insertion into the Ti? H bond was only 3–4 times lower than the probability of primary insertion. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1353–1365, 2002