Thermosensitive and photocleavable polyaspartamide derivatives for drug delivery

The development of novel thermo‐ and photo‐dual‐responsive biodegradable polymeric micelles based on amphiphilic polyaspartamide derivatives (NB‐g‐PHPA‐g‐mPEG) for anticancer drug delivery is reported. The obtained polymers containing hydrophobic photocleavable o‐nitrobenzyl groups exhibit thermo‐ and photosensitivity. The micelles and paclitaxel‐loaded micelles based on the thermo‐ and photo‐dual‐sensitive polymers were prepared by a quick heating method without using toxic organic solvent. The paclitaxel release from the drug‐loaded micelles can be triggered under photoirradiation. Enhancement of the anticancer activity against HeLa cells was observed for paclitaxel‐loaded NB‐g‐PHPA‐g‐mPEG micelles after light irradiation, while the empty NB‐g‐PHPA‐g‐mPEG micelles with or without irradiation did not show any toxicity. Therefore, the thermo‐ and photo‐dual‐responsive NB‐g‐PHPA‐g‐mPEG micelles have a promising future applied as a light controlled drug delivery system for anticancer drugs. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2855–2863     

Biodegradable and thermosensitive micelles of amphiphilic polyaspartamide derivatives containing aromatic groups for drug delivery

The preparation, characterization, release, and in vitro cytotoxicity of a biodegradable polymeric micellar formulation of paclictaxel (PTX) were investigated. The micelles based on thermosensitive and degradable amphiphilic polyaspartamide derivatives containing pendant aromatic structures (phe‐g‐PHPA‐g‐mPEG) were prepared by a quick heating method without using toxic organic solvent. Dynamic light‐scattering results show that the micelles are stable upon dilution under physiological conditions and the destabilization of the micelles is pH‐dependent and the phe‐g‐PHPA‐g‐mPEG polymers are biodegradable. PTX was loaded into the phe‐g‐PHPAs‐g‐mPEG micelles with encapsulation efficiency of >90%, resulting in a high drug loading content (up to 29%). PTX‐loaded micelles had a mean size around 70 nm with narrow size distribution (polydispersity index, <0.1). The PTX‐loaded micelles showed sustained drug release and obvious anticancer activity similar to Taxol against HepG2 cells, whereas blank micelles were nontoxic. The present results suggest that the thermosensitive and biodegradable phe‐g‐PHPA‐g‐mPEG micelles are a promising delivery system for the hydrophobic drugs. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3917–3924     

pH‐ and β‐cyclodextrin‐responsive micelles based on polyaspartamide derivatives as drug carrier

A novel kind of graft polymer poly(aspartic acid)‐ethanediamine‐g‐adamantane/methyloxy polyethylene glycol (Pasp‐EDA‐g‐Ad/mPEG) was designed and synthesized for drug delivery in this study. The chemical structure of the prepared polymer was confirmed by proton NMR. The obtained polymer can self‐assemble into micelles which were stable under a physiological environment and displayed pH‐ and β‐cyclodextrin (β‐CD)‐responsive behaviors because of the acid‐labile benzoic imine linkage and hydrophobic adamantine groups in the side chains of the polymer. The doxorubicin (Dox)‐loaded micelles showed a slow release under physiological conditions and a rapid release after exposure to weakly acidic or β‐CD environment. The in vitro cytotoxicity results suggested that the polymer was good at biocompatibility and could remain Dox biologically active. Hence, the Pasp‐EDA‐g‐Ad/mPEG micelles may be applied as promising controlled drug delivery system for hydrophobic antitumor drugs. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1387–1395     

Modification of polysulfones by click chemistry: Amphiphilic graft copolymers and their protein adsorption and cell adhesion properties

Well‐defined amphiphilic graft copolymer with hydrophobic polysulfone (PSU) backbone and hydrophilic poly(acrylic acid) (PAA) side chains were synthesized and characterized. For this purpose, commercially available PSU was converted to azido‐functionalized polymer (PSU‐N₃) by successive chloromethylation and azidation processes. Independently, poly(tert‐butyl acrylate) (PtBA) with an alkyne‐end‐group is obtained by using suitable initiator in atom transfer radical polymerization (ATRP). Then, this polymer was successfully grafted onto PSU‐N₃ by click chemistry to yield polysulfone‐graft‐poly(tert‐butyl acrylate), (PSU‐g‐PtBA). Finally, amphiphilic polysulfone‐graft‐poly(acrylic acid), (PSU‐g‐PAA), membranes were obtained by hydrolyzing precursor the PSU‐g‐PtBA membranes in trifluoroacetic acid. The final polymer and intermediates at various stages were characterized by ¹H NMR, FTIR, GPC, and SEM analyses. Protein adsorption and eukaryotic and prokaryotic cell adhesion on PSU‐g‐PAA were studied and compared to those of PSU‐g‐PtBA and unmodified PSU. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Novel types of carborane-carrier hyaluronan derivatives via "click chemistry"

Two new HA derivatives bearing carborane rings were synthesized by click chemistry. The optimal conditions were assessed for the preparation of biocompatible boron carriers, potentially suitable for application in BNCT and capable of targeting the CD44 antigen. The new polymeric samples were characterized by means of NMR-spectroscopy techniques that gave degrees of 17 and 8% for HAAACB and HapACB, respectively. Both HAAACB and HApACB turned out to be nontoxic for colorectal, ovarian and bladder tumor cell lines, to disclose a specific interaction with the CD44 antigen as the native hyaluronan moiety, and to deliver boron-atom concentrations largely sufficient for BNCT therapy when accumulated in cancer cells.     

Phase transition behavior of novel pH-sensitive polyaspartamide derivatives grafted with 1-(3-aminopropyl)imidazole

New pH-sensitive polyaspartamide derivatives were synthesized by grafting 1-(3-aminopropyl)imidazole and/or O-(2-aminoethyl)-O'-methylpoly(ethylene glycol) 5000 on polysuccinimide for application in intracellular drug delivery systems. The DS of 1-(3-aminopropyl)imidazole was adjusted by the feed molar ratio, and the structure of the prepared polymer was confirmed using FT-IR and 1H NMR spectroscopy. Their pH-sensitive properties were characterized by light transmittance measurements, and the particle size and its distribution were investigated by dynamic light scattering measurements at varying pH values. The pH-sensitive phase transition was clearly observed in polymer solutions with a high substitution of 1-(3-aminopropyl)imidazole. The prepared polymers showed a high buffering capacity between pH 5 and 7, and this increased with the DS of 1-(3-aminopropyl)imidazole. The pH dependence of the aggregation and de-aggregation behavior was examined using a fluorescence spectrometer. For MPEG/imidazole-g-polyaspartamides with a DS of 1-(3-aminopropyl)imidazole over 82%, self aggregates associated with the hydrophobic interactions of the unprotonated imidazole groups were observed at pH values above 7, and their mean size was over 200 nm, while the aggregates of polymers were dissociated at pH values below 7 by the protonation of imidazole groups. These pH-sensitive polyaspartamide derivatives are potential basic candidates for intracellular drug delivery carriers triggered by small pH changes.     

Temperature and pH dual‐sensitive polyaspartamide derivatives for antitumor drug delivery

The pH‐sensitive tertiary amino groups were introduced to synthesize temperature and pH dual‐sensitive degradable polyaspartamide derivatives (phe/DEAE‐g‐PHPA) containing pendant aromatic structures and ionizable tertiary amino groups. The thermo/pH‐responsive behavior of phe/DEAE‐g‐PHPA polymer can be tuned by adjusting the graft copolymer composition. Due to the pH sensitivity of the phe/DEAE‐g‐PHPA‐g‐mPEG polymer with hydrophilic long PEG chain, the micelles and the anticancer drug‐loaded micelles were prepared by a quick pH‐changing method without using toxic organic solvent. The obtained polymeric micelles, paclitaxel‐loaded micelles and doxorubicin‐loaded micelles were stable under physiological conditions. Both the drug‐loaded micelles showed much faster release at pH 5 than at pH 7.4. The doxorubicin‐loaded micelles showed obvious and better anticancer activity against both HepG2 and HeLa cells than free doxorubicin. Thus these nontoxic, dual thermo‐ and pH‐sensitive phe/DEAE‐g‐PHPA‐g‐mPEG micelles may be a promising anticancer drug delivery system. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 879–888     

Versatile functionalization of aromatic polysulfones via thiol‐ene click chemistry

A facile, efficient approach for preparation of functionalized aromatic polysulfones by postpolymerization modification with thiol‐ene click chemistry is described. The key synthetic strategy is to incorporate a pendant vinyl ether group into polysulfones as a reactive precursor with controlled degrees of functionalization. Synthetic utility of the pendant alkenyl group is demonstrated by generating diverse polymer derivatives using thiol‐ene functionalization including glycosylated polysulfone. The highly reactive alkene platform in the polymer affords convenient, metal‐free, and azide‐free click transformations to create diverse ranges of new functionalized polysulfones that could be applied in various applications. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3237–3243     

Side chain impacts on pH‐ and thermo‐responsiveness of tertiary amine functionalized polypeptides

The systemic investigation of the structural impacts of side chains on the pH‐ and thermo‐responsiveness of tertiary amine functionalized poly(l ‐glutamate)s (TA‐PGs) was carried out. The TA‐PGs polymers were effectively synthesized by Cu(I)‐catalyzed azide‐alkyne cycloaddition click reaction of azido tertiary amines with poly(γ‐propargyl‐l ‐glutamate) (PPLG). Turbimetric measurements were performed to characterize the pH‐ and temperature‐induced phase transition of TA‐PGs in aqueous solution, which suggested a structural dependence of the properties on the N‐substituted groups and the “linkers” between 1,2,3‐triazole ring and the tertiary amine groups in the side chains. In detail, the pH responsive properties of TA‐PGs were basically determined by the hydrophobicity of the N‐substituted groups in the side chains and the pH transition point (pH_t) decreased as the increasing hydrophobicity of the N‐substituted groups, while the temperature‐responsiveness of TA‐PGs were affected by either the N‐substituted groups or the “linkers.” TA‐PGs with a moderate N‐substituted amine group (e.g., DEA, PR, and PD) or a branched “linker” (e.g., iso‐propylene and 2‐methylpropylene group) were more likely to express the LCST‐type phase transition tuned by pH variation. These structure–property relationships revealed in this study would help to develop the applications of TA‐PGs in smart drug delivery systems. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 671–679     

Polymer Micro‐ and Nanocapsules as Biological Carriers with Multifunctional Properties

The design and development of multifunctional polymer capsules with controlled chemical composition and physical properties has been the focus of academic and industrial research in recent years. Especially in the biomedical field, the formulation of novel polymer‐based encapsulation systems for the early‐stage disease diagnostic and effective delivery of bioactive agents represent one of the most rapidly advancing areas of science. The stimuli‐responsive release of cargo molecules from the carrier gains remarkable attention for in vitro and in vivo delivery of contrast agents, genes, and pharmaceutics. In this Review, the current status and the challenges of different polymer‐based micro‐ and nanocapsule formulations are considered, emphasizing on their potential biological application as carriers for specific drug targeting and controlled release upon applying of external stimulus.     

Design of a poly(L‐histidine)‐carbohydrate conjugate for a new pH‐sensitive drug carrier

A poly(L ‐histidine) (PLH)‐carbohydrate conjugate has been synthesized as a new macromolecule extracting pH‐dependent properties of PLH with imidazole groups. Because of poor water solubility at physiological pH, the application of PLH with a pK_a around 6.0 has been limited in spite of the native possession of the pH‐dependent property change at endosomal pH. Although the PLH modified with aliphatic primary amino groups suddenly precipitated out of the aqueous medium above pH 6.0 as a result of the deprotonation of the imidazole groups, the water solubility of PLH was improved at physiological pH by the conjugation of the aminated PLH with hydrophilic maltopentaose. The resulting PLH‐maltopentaose conjugates and metalloporphyrins formed the complexes which varied their assembling structure below pH 6.0. The PLH‐maltopentaose would be the fundamental compound for designing various drug carriers with the pH sensitivity at endosomal pH. Copyright © 2004 John Wiley & Sons, Ltd.     

Facile one‐shot synthesis of functional star‐shaped polymers by domino‐type living cationic copolymerization

This article describes the syntheses of various functional star‐shaped polymers via monomer‐selective living cationic polymerization of a vinyl ether (VE) and a divinyl compound with alkoxystyrene moieties by a one‐shot method. An aqueous solution of the resulting star‐shaped polymers with oxyethylene pendants exhibits thermally induced phase separation behavior. To achieve domino synthesis from various monomers, we investigated the optimum reactivity difference using a functional VE and a monofunctional alkoxystyrene. Moreover, the one‐shot copolymerization of a bifunctional VE and an alkoxystyrene is also conducted to yield a star‐shaped polymer via the core‐first method. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 2166–2174     

Facile Fabrication of Thermo‐Responsive and Reduction‐Sensitive Polymeric Micelles for Anticancer Drug Delivery

The development of thermo‐responsive and reduction‐sensitive polymeric micelles based on an amphiphilic block copolymer poly[(PEG‐MEMA)‐co‐(Boc‐Cyst‐MMAm)]‐block‐PEG (denoted PEG‐P‐SS‐HP) for the intracellular delivery of anticancer drugs is reported. PTX, as model drug, was loaded into the PEG‐P‐SS‐HP micelles with an encapsulation efficiency >90%, resulting in a high drug loading content (up to 35 wt%). The PTX‐loaded PEG‐P‐SS‐HP micelles show slow drug release in PBS and rapid release after incubation with DTT. The PTX‐loaded micelles display a better cytotoxic effect than the free drug, whereas empty micelles are found to be non‐toxic. The thermo‐responsive and reduction‐sensitive polymeric micelles described may serve as promising carriers for cytostatic drugs.

     

In situ preparation of hetero-polymers/clay nanocomposites by CUAAC click chemistry

A series of polymer/clay nanocomposites containing mechanistically two different polymers, poly(ethylene glycol) (PEG) and poly(epsilon caprolactone) (PCL), were prepared by simultaneous copper(I)-catalyzed alkyne-azide cycloaddition click reactions. Both clickable polymers, PEG-Alkyne and PCL-Alkyne, were simultaneously clicked on to azide-functional montmorillonite (MMT-N₃) nanoclay to get corresponding PEG-PCL/MMT nanocomposites. The chemical structures of the resulting nanocomposites were verified by following azide and silicone-oxygen bands using FT-IR and characteristic bands of PEG and PCL segments using ¹H-NMR spectroscopy. The combined XRD and TEM analysis confirmed that all PEG-PCL/MMT nanocomposites had partially exfoliated/intercalated morphologies. In addition, the increase of MMT-N₃ loading not only improved the onset and maximum degradation temperatures of the nanocomposites but also their char yields. Furthermore, the incorporation of MMT-N₃ in the polymer matrix did not significantly influence the crystallization behavior of both PEG and PCL segments.     

UV-photocrosslinking of inulin derivatives to produce hydrogels for drug delivery application

In this work, INU, a natural polysaccharide, has been chemically modified in order to obtain new photocrosslinkable derivatives. To reach this goal, INU has been derivatized with MA thus obtaining four samples (INU-MA derivatives) as a function of the temperature and time of reaction. An aqueous solution of the derivative INU-MA1 was irradiated by using a UV lamp with an emission range from 250 to 364 nm and without using photoinitiators. The obtained hydrogel showed a remarkable water affinity but it underwent a partial degradation in simulated gastric fluid. To overcome this drawback, INU-MA1 was derivatized with SA thus obtaining the INU-MA1-SA derivative designed to produce a hydrogel showing a low swelling and an increased chemical stability in acidic medium. Ibuprofen, as a model drug, was loaded by soaking into INU-MA1 and INU-MA1-SA hydrogels and its release from these matrices was evaluated in simulated gastrointestinal fluids. INU-MA1 hydrogel showed the ability to quickly release the entrapped drug thus indicating its potential as a matrix for an oral formulation. INU-MA1-SA hydrogel showed a pH-responsive drug delivery. Therefore it is a promising candidate for controlled drug release in the intestinal tract.     

Electrochemical synthesis of PEDOT derivatives bearing imidazolium‐ionic liquid moieties

Novel poly(3,4‐ethylenedioxythiophene) (PEDOT) polymers bearing imidazolium‐ionic liquid moieties were synthesized by electrochemical polymerizations. For this purpose, new functional monomers were synthesized having an 3,4‐ethylenedioxythiophene (EDOT) unit and an imidazolium‐ionic liquid with different anions such as tetrafluoroborate (BF), bis(trifluoromethane)sulfonimide ((CF₃SO₂)₂N^?), and hexafluorophosphate (PF). Next, polymer films were obtained by electrochemical synthesis in dicholoromethane solutions. Obtained polymers were characterized, revealing the characteristics of PEDOT in terms of electrochemical and spectroelectrochemical properties, FTIR, ¹H NMR, and AFM microscopy. Interestingly, the hydrophobic character of electropolymerized films could be modified depending on the anion type. The hydrophobicity followed the trend PF > (CF₃SO₂)₂N^? > BF > pure PEDOT as determined by water contact angle measurements. Furthermore, the polymers could be dissolved in a range of polar organic solvents such as dimethylformamide, propylene carbonate, and dimethyl sulfoxide making these polymers interesting candidates for wet processing methods. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3010–3021, 2009     

Facile synthesis of ABCDE‐type H‐shaped quintopolymers by combination of ATRP,ROP, and click chemistry and their potential applications as drug carriers

A facile approach to synthesis of ABCDE‐type H‐shaped quintopolymer comprising polystyrene (PSt, C) main chain and poly(ethylene glycol) (PEG, A), poly(ε‐caprolactone) (PCL, B), poly(L ‐lactide) (PLLA, D), and poly(acrylic acid) (PAA, E) side chains was described, and physicochemical properties and potential applications as drug carriers of copolymers obtained were investigated. Azide‐alkyne cycloaddition reaction and hydrolysis were used to synthesize well‐defined H‐shaped quintopolymer. Cytotoxicity studies revealed H‐shaped copolymer aggregates were nontoxic and biocompatible, and drug loading and release properties were affected by macromolecular architecture, chemical composition, and pH value. The release rate of doxorubicin from copolymer aggregates at pH 7.4 was decreased in the order PAA‐b‐PLLA > H‐shaped copolymer > PEG‐PCL‐PSt star, and the release kinetics at lower pH was faster. The H‐shaped copolymer aggregates have a potential as controlled delivery vehicles due to their excellent storage stability, satisfactory drug loading capacity, and pH‐sensitive release rate of doxorubicin. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012