Mechanistic insight into initiation and chain transfer reaction of CO2/cyclohexene oxide copolymerization catalyzed by zinc?cobalt double metal cyanide complex catalysts

Although zinc? cobalt (III) double metal cyanide complex (Zn? Co (III) DMCC) catalyst is a highly active and selective catalyst for carbon dioxide (CO₂)/cyclohexene oxide (CHO) copolymerization, the structure of the resultant copolymer is poorly understood and the catalytic mechanism is still unclear. Combining the results of kinetic study and electrospray ionization‐mass spectrometry (ESI‐MS) spectra for CO₂/CHO copolymerization catalyzed by Zn? Co (III) DMCC catalyst, we disclosed that (1) the short ether units were mainly generated at the early stage of the copolymerization, and were hence in the “head” of the copolymer and (2) all resultant PCHCs presented two end hydroxyl (? OH) groups. One end ? OH group came from the initiation of zinc? hydroxide (Zn? OH) bond and the other end ? OH group was produced by the chain transfer reaction of propagating chain to H₂O (or free copolymer). Adding t‐BuOH (CHO: t‐BuOH = 2:1, v/v) to the reaction system led to the production of fully alternating PCHCs and new active site of Zn? Ot‐Bu, which was proved by the observation of PCHCs with one end ? Ot‐Bu (and ? OCOOt‐Bu) group from ESI‐MS and ¹³C NMR spectra. Moreover, Zn?OH bond in Zn? Co (III) DMCC catalyst was also characterized by the combined results from FT‐IR, TGA and elemental analysis. This work provided new evidences that CO₂/CHO copolymerization was initiated by metal? OH bond. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Selectively degradable alternating copolymers of isobutyl vinyl ether and plant‐derived aldehydes with acyclic side chains: Effects of side group structures on copolymerization behaviors

Side group structures of aldehydes were demonstrated to have decisive effects on cationic copolymerizations with alkyl vinyl ether (VE). Alternating copolymerizations of isobutyl VE (IBVE) and plant‐derived aldehydes with acyclic side chains such as trans‐2,cis‐6‐nonadienal, trans‐2‐nonenal, and citral proceeded under appropriate reaction conditions with the EtSO₃H/GaCl₃ initiating system. In addition, some aldehydes copolymerized in a well‐controlled fashion to yield alternating copolymers with controlled molecular weights and narrow molecular weight distributions. Quantitative and selective acid hydrolysis of the resulting alternating copolymers, based on the acetal structures in the main chains, was also achieved to give other conjugated aldehydes as nearly sole degradation products. Copolymerization results of IBVE and various plant‐derived aldehydes with acyclic or cyclic side groups suggested that electron‐donating ability and bulkiness of the side groups were most likely responsible for the alternating and/or controlled copolymerization behaviors. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4684–4693     

Synthesis and photovoltaic properties of copolymers based on benzo[1,2‐b:4,5‐b′]dithiophene and thiophene with electron‐withdrawing side chains

Six alternating conjugated copolymers ( PL1 – PL6 ) of benzo[1,2‐b:4,5‐b′]dithiophene (BDT) and thiophene, containing electron‐withdrawing oxadiazole (OXD), ester, or alkyl as side chains, were synthesized by Stille coupling reaction. The structures of the polymers were confirmed, and their thermal, optical, electrochemical, and photovoltaic properties were investigated. The introduction of conjugated electron‐withdrawing OXD or formate ester side chain benefits to decrease the bandgaps of the polymers and improve the photovoltaic performance due to the low steric hindrance of BDT. Bulk heterojunction polymer solar cells (PSCs) were fabricated based on the blend of the as‐synthesized polymers and the fullerene derivative [6,6]‐phenyl‐C₆₁‐butyric acid methyl ester (PC₆₁BM) in a 1:2 weight ratio. The maximum power conversion efficiency of 2.06% was obtained for PL5 ‐based PSC under the illumination of AM 1.5, 100 mW/cm². © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Thermally latent polyaddition and curing of Di‐ and tri‐functional hemiacetal esters with diepoxide by salen‐zinc complex with tunable catalytic activity and model and networking reactions

Salen‐zinc complexes (Zn/ 1 _R ) thermal‐latently catalyzed the polyaddition of a diepoxide ( 2 ) with a difunctional hemiacetal ester ( 3 ), which proceeded at moderate temperatures (100–150 °C) for curing of mixtures containing monomers and initiators. The catalytic activities of Zn/ 1 _R depended on the Lewis acidities of the complexes controlled by the electronic character of the salen ligands. For example, Zn/ 1 _3,5‐Cl bearing four electron‐withdrawing chlorine atoms initiated the polyaddition at the lowest temperature (100 °C), and Zn/ 1 _OMe bearing two electron‐donating methoxy groups initiated the polyaddition at 120 °C. The Lewis acidities of the complexes were evaluated by NMR and IR spectroscopies and computational calculation. The polyadditions with the salen‐zinc complexes proceeded quantitatively at 150 °C, and the use of a tri‐functional hemiacetal ester ( 7 ) with 2 afforded the corresponding networked polymer. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1427–1439, 2008     

Asymmetric,regio‐ and stereo‐selective alternating copolymerization of CO2 and propylene oxide catalyzed by chiral chromium Salan complexes

Chiral chromium complexes of tetradentate N,N′‐disubstituted bis(aminophenoxide) (designated as Salan, a saturated version of Schiff‐base Salen ligand) in conjunction with an ionic quaternary ammonium salt can efficiently catalyze the copolymerization of CO₂ with racemic propylene oxide (rac‐PO) at mild conditions to selectively afford completely alternating poly(propylene carbonate) (PPC) with ～ 95% head‐to‐tail linkages and moderate enantioselectivity. These new catalyst systems predominantly exceed the previously much‐studied SalenCr(III) systems in catalytic activity, polymer enantioselectivity, and stereochemistry control. The chiral diamine backbone, sterically hindered substitute groups on the aromatic rings, and the presence of sp³‐hydridized amino donors and its N,N′‐disubstituted groups in chiral SalanCr(III) complexes all play significant roles in controlling polymer stereochemistry and enantioselectivity. Furthermore, a relationship between polycarbonate enantioselectivity and its head‐to‐tail linkages in relation to regioselective ring‐opening of the epoxide was also discussed on the basis of stereochemical studies of PPCs derived from the copolymerization of CO₂ with chiral PO at various conditions. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6102–6113, 2008     

Design of maleimide monomer for higher level of alternating sequence in radical copolymerization with styrene

This work deals with design of maleimide monomer toward more precise control of alternating sequence for radical copolymerization with styrene. Crucial in this study is sequence analysis by MALDI‐TOF‐MS for resultant copolymers that was obtained via ruthenium‐catalyzed living radical copolymerization with a malonate‐based alkyl halide initiator showing selective initiation ability. The copolymers of a simple N‐alkyl maleimide [e.g., N‐ethyl maleimide (EMI)] with styrene gave complicated peak patterns for the MALDI‐TOF‐MS spectra indicating low degree of alternating sequence, in contrary to expectation from the reactivity ratios (almost zero). A simple substitution of methyl group (CH₃) of EMI with trifluoromethyl (CF₃: CF₃‐MI) made the peak patterns much simpler giving the copolymer with higher alternating sequence. More interestingly, the peak interval of the copolymer at earlier polymerization stage was equal to sum of the molecular weights of CF₃‐MI and styrene, suggesting possibility of the pair propagation of the monomers. Indeed, ¹H NMR analyses of the mixture of maleimide with styrene suggested stronger interaction of CF₃‐MI than EMI. Based on the results, maleimide derivatives carrying a substituent‐designable electron‐withdrawing group [ROC(?O)N–: R = substituent] were newly designed toward incorporation of functional side chains. They also gave higher alternating sequence for the copolymerization with styrene. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 367–375     

Microwave‐Accelerated Pd‐Catalyzed Desulfitative Direct C2‐Arylation of Free (NH)‐Indoles with Arylsulfinic Acids

The rapid and efficient direct C2‐arylation of free (NH)‐indoles with arylsulfinic acids proceeded through a microwave‐accelerated palladium‐catalyzed desulfitation reaction. By using PdCl₂ as a catalyst, silver acetate as an oxidant, and H₂SO₄ as an additive, arylsulfinic acids with both electron‐donating and electron‐withdrawing groups underwent desulfitative coupling with an array of free (NH)‐indoles, thereby selectively providing C2‐arylindoles in good yields.     

Radical copolymerization of alkyl 2‐norbornene‐2‐carboxylate with alkyl acrylates: Facile incorporation of norbornane framework into poly(alkyl acrylate)s

Radical copolymerization of alkyl 2‐norbornene‐2‐carboxylates (alkyl = Me 1a , nBu 1b ) with alkyl acrylates (alkyl = ethyl, methyl, and n‐butyl) was investigated. Copolymerization of 1a,b with the alkyl acrylates initiated by 1,1′‐azobis (cyclohexane‐1‐carbonitrile) at 85 °C proceeded to give random copolymers, although the homopolymerization of 1a,b did not proceed efficiently under the same conditions. Typically, bulk copolymerization of 1a with ethyl acrylate in a feed ratio of 1:3 ([ 1a ]:[EA]) afforded a copolymer with M_n = 33,300 containing 19.4 mol % of 1a unit in the composition. An increase of T_g derived from the incorporation of the rigid norbornane framework was observed, although the extent of the temperature rise was rather moderate. The ternary radical copolymerization of 1a,b /alkyl acrylate/N‐phenylmaleimide proceeded to give copolymers with the three repeating units in the main chain. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4597–4605, 2007     

Highly active ethylene polymerization and copolymerization with norbornene using bis(imino‐indolide) titanium dichloride–MAO system

A catalytic system of new titanium complexes with methylaluminoxane (MAO) was found to effectively polymerize ethylene for high molecular weight polyethylene as well as highly active copolymerization of ethylene and norbornene. The bis (imino‐indolide)titanium dichlorides (L₂TiCl₂, 1 – 5 ), were prepared by the reaction of N‐((3‐chloro‐1H‐indol‐2‐yl)methylene)benzenamines with TiCl₄, and characterized by elemental analysis, ¹H and ¹³C NMR spectroscopy. The solid‐state structures of 1 and 4 were determined by X‐ray diffraction analysis to reveal the six‐coordinated distorted octahedral geometry around the titanium atom with a pair of chlorides and ligands in cis‐forms. Upon activation by MAO, the complexes showed high activity for homopolymerization of ethylene and copolymerization of ethylene and norbornene. A positive “comonomer effect” was observed for copolymerization of ethylene and norbornene. Both experimental observations and paired interaction orbital (PIO) calculations indicated that the titanium complexes with electron‐withdrawing groups in ligands performed higher catalytic activities than those possessing electron‐donating groups. Relying on different complexes and reaction conditions, the resultant polyethylenes had the molecular weights M_w in the range of 200–2800 kg/mol. The influences on both catalytic activity and polyethylene molecular weights have been carefully checked with the nature of complexes and reaction conditions. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3415–3430, 2007     

Synthesis,optical and photoconducting properties of platinum poly‐yne polymers functionalized with electron‐donating and electron‐withdrawing bithiazole units

By virtue of the electron‐donating and electron‐withdrawing properties of the thiazole ring, a new soluble rigid‐rod organometallic polymer containing electron‐donating and electron‐withdrawing trans‐[‐Pt‐(PBu₃)₂‐C≡C—R—C≡C—]_n (R = bithiazolediyl) groups is prepared by CuI‐catalyzed dehydrohalogenation. The thermal properties and the optical absorption and photoluminescence spectra of the polymer are reported. The polymer is luminescent with a singlet emission peak at 539 nm and photoconducting in a single‐layer sandwich structure photocell. The optical gap of the polymer is reduced compared to that for the oligothienyl analogue.     

Nickel‐catalyzed Buchwald–Hartwig amination of pyrimidin‐2‐yl tosylates with indole,benzimidazole and 1,2,4‐triazole

Nickel‐catalyzed Buchwald–Hartwig amination of pyrimidin‐2‐yl tosylates with indole and benzimidazole was achieved using Ni(dppp)Cl₂ as catalyst, yielding a variety of novel C2‐substituted pyrimidine derivatives in good yields. This reaction proved to be tolerant of various pyrimidin‐2‐yl tosylates bearing either electron‐donating or electron‐withdrawing groups as well as nucleophiles including indole, benzimidazole and 1,2,4‐triazole. Copyright © 2016 John Wiley & Sons, Ltd.     

Synthesis of poly(5,6‐difluoro‐2,1,3‐benzothiadiazole‐alt‐9,9‐dioctyl‐fluorene) via direct arylation polycondensation

Poly(5,6‐difluoro‐2,1,3‐benzothiadiazole‐alt‐9,9‐dioctylfluorene) was successfully synthesized via direct arylation polycondensation of 5,6‐difluoro‐2,1,3‐benzothiadiazole and 2,7‐dibromo‐9,9‐dioctylfluorene. The reaction conditions were optimized, and a polymer with number‐average molecular weight (M_n) of 41,000 was obtained by using Pd(OAc)₂, P^tBu₂Me‐HBF₄, pivalic acid, K₂CO₃, and toluene as catalyst, ligand, additive, base, and solvent, respectively. The polycondensation was also performed with 5,6‐dioctyloxy‐2,1,3‐benzothiadiazole or 2,1,3‐benzothiadiazole as the comonomer, and the results indicate that the introduction of electron‐withdrawing fluorine atoms at the ortho‐positions to the C? H bonds is essential for the reactivity of the direct arylation. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2367–2374     

Effect of supercritical CO2 on the copolymerization behavior of cyclohexene oxide/CO2 and copolymer properties with DMC/Salen‐Co(III) catalyst system

The copolymerization of cyclohexene oxide (CHO) and carbon dioxide (CO₂) was carried out under supercritical CO₂ (scCO₂) conditions to afford poly (cyclohexene carbonate) (PCHC) in high yield. The scCO₂ provided not only the C1 feedstock but also proved to be a very efficient solvent and processing aid for this copolymerization system. Double metal cyanide (DMC) and salen‐Co(III) catalysts were employed, demonstrating excellent CO₂/CHO copolymerization with high yield and high selectivity. Surprisingly, our use of scCO₂ was found to significantly enhance the copolymerization efficiency and the quality of the final polymer product. Thermally stable and high molecular weight (MW) copolymers were successfully obtained. Optimization led to excellent catalyst yield (656 wt/wt, polymer/catalyst) and selectivity (over 96% toward polycarbonate) that were significantly beyond what could be achieved in conventional solvents. Moreover, detailed thermal analyses demonstrated that the PCHC copolymer produced in scCO₂ exhibited higher glass transition temperatures (T_g ～ 114 °C) compared to polymer formed in dense phase CO₂ (T_g ～ 77 °C), and hence good thermal stability. Additionally, residual catalyst could be removed from the final polymer using scCO₂, pointing toward a green method that avoids the use of conventional volatile organic‐based solvents for both synthesis and work‐up. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2785–2793     

Programmed Site‐Selective Palladium‐Catalyzed Arylation of Thieno[3,2‐b]thiophene

Mono‐, di‐, tri‐, and tetraarylated thieno[3,2‐b ]thiophenes were synthesized by direct site‐selective Pd‐catalyzed C−H activation reactions with various aryl bromides in the presence of a phosphine‐free Pd(OAc)₂/KOAc catalyst system in N ,N ‐dimethylacetamide (DMAc). The arylation of 2‐arylthieno[3,2‐b ]thiophene took place at the C3 position if the 2‐aryl substituents possessed electron‐withdrawing groups and at the C5 position if they were bulky and possessed electron‐donating groups.     

Cobalt(III)‐complex‐mediated terpolymerization of CO2, styrene oxide,and epoxides with an electron‐donating group

Terpolymerizations of CO₂, styrene oxide (SO), and epoxides with an electron‐donating group such as propylene oxide (PO) or cyclohexene oxide (CHO) were carried out by using Co(III)–salen complexes in the presence of an intra‐ or intermolecular nucleophilic cocatalyst. The resultant terpolymers have only one thermolysis peak and one glass transition temperature (T_g), which can be easily adjusted by controlling the proportion of styrene carbonate linkages. During the CO₂/SO/PO terpolymerization, the monomer reactivity ratios (r_SO = 0.18 and r_PO = 2.25) evaluated by Fineman–Ross plot indicates a random distribution of the two kinds of carbonate units in the resultant polymer. Contrarily, the monomer reactivity ratios were found to be r_SO = 0.48 and r_CHO = 0.79 in the CO₂/SO/CHO terpolymerization, indicating that an alternating nature of the two different carbonate units predominantly exists in the resultant polycarbonate. The regioselective ring opening of SO has a significant effect on the reactivities of both SO and CHO during the terpolymerization with CO₂. The matched reactivity is contributed to the enhanced regioselective ring opening of SO, caused by the attack of the dissociating polymer carboxylate anion, bearing a cyclohexene carbonate end unit. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Highly symmetric single nickel catalysts bearing bulky bis(α‐diimine) ligand: Synthesis,characterization, and electron‐effects on copolymerization of norbornene with 1‐alkene at elevated temperarure

Three new three‐dimensional geometry bulky α‐diimine ligands ( L ) containing electron‐donating and electron‐withdrawing groups, 9,10‐dihydro‐9,10‐ethanoanthracene‐11,12‐di(Ar)imine (Ar = p‐PhCH₃, L1 ; Ar=p‐PhCl, L2 ; Ar=p‐PhCF₃, L3 .), and their corresponding single Ni(II) catalysts, NiL₂Br₂ ( Ni(L1)₂Br₂ , Ni(L2)₂Br₂ , and Ni(L3)₂Br₂ , were synthesized and the molecular structure were determined by X‐ray crystallography. All NiL₂Br₂ catalysts were tested for norbornene polymerization and copolymerization of norbornene with 1‐alkene after activation with B(C₆F₅)₃. The results that the polymerization catalytic activities for norbornene up to 10⁵ g_polymer/mol_Ni·h even at 140 °C, shown that NiL₂Br₂ catalysts have high thermal stability. Meanwhile, catalysts with electron‐withdrawing groups could achieve higher reactivity. The obtained poly(NB‐co‐1‐alkene)s were confirmed to be vinyl‐addition copolymers and noncrystalline. All copolymers exhibited high 1‐alkenes insertion ratio, good thermal stability (T_d > 375 °C), high molecular weight (up to 10⁵ g/mol), good solubility in common organic solvents and could be processed into films with good transparency in the visible region. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3495–3505     

Polymer cyclization inhibits thermal decomposition of carbon‐dioxide‐derived poly(propylene carbonate)s

Remarkable enhancement of CO₂‐derived poly(propylene carbonate) (PPC) against thermal decomposition was achieved by cyclization of linear PPCs. Thus, a CO₂‐derived linear vinyl‐telechelic PPC was synthesized by CO₂–propylene oxide alternating copolymerization initiated from H₂O followed by an end‐capping esterification with 4‐pentenoic acid. Cyclic PPC was synthesized by the end‐to‐end intramolecular reaction of the vinyl‐telechelic linear PPC by metathesis condensation. Comparison of the thermal decomposition temperature (T_d) with linear and cyclic PPCs confirms surprisingly enhanced T_ds of cyclic PPCs. The elimination of chain ends through cyclization is indeed valuable for enhancing T_d of CO₂‐derived PPCs and thus turn the spotlight on the materials design utilizing CO₂. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3336–3342     

Copolymerization of propylene with various higher α‐olefins using silica‐supported rac‐Me2Si(Ind)2ZrCl2

The copolymerization of propylene with 1‐hexene, 1‐octene, 1‐decene, and 1‐dodecene was carried out with silica‐supported rac‐Me₂Si(Ind)₂ZrCl₂ as a catalyst. The copolymerization activities of the homogeneous and supported catalysts and the microstructures of the resulting copolymers were compared. The activity of the supported catalyst was only one‐half to one‐eighth of that of the homogeneous catalyst, depending on the comonomer type. The supported catalyst copolymerized more comonomer into the polymer chain than the homogeneous catalyst at the same monomer feed ratio. Data of reactivity ratios showed that the depression in the activity of propylene instead of an enhancement in the activity of olefinic comonomer was responsible for this phenomenon. We also found that copolymerization with α‐olefins and supporting the metallocene on a carrier improved the stereoregularity and regioregularity of the copolymers. The melting temperature of all the copolymers decreased linearly with growing comonomer content, regardless of the comonomer type and catalyst system. Low mobility of the propagation chain in the supported catalyst was suggested as the reason for the different polymerization behaviors of the supported catalyst with the homogeneous system. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3294–3303, 2001     

Synthesis of 2‐amino‐4‐oxo‐5‐substitutedbenzylthiopyrrolo[2,3‐d]‐pyrimidines as potential inhibitors of thymidylate synthase

A series of ten novel 2‐amino‐4‐oxo‐5‐[(substitutedbenzyl)thio]pyrrolo[2,3‐d]pyrimidines 2‐11 were synthesized as potential inhibitors of thymidylate synthase and as antitumor agents. The analogues contain various electron withdrawing and electron donating substituents on the benzylsulfanyl ring of the side chains and were synthesized from the key intermediate 2‐amino‐4‐oxo‐6‐methylpyrrolo[2,3‐d]pyrimidine, 14 . Appropriately substituted benzyl mercaptans were appended to the 5‐position of 14 via an oxidative addition reaction using iodine, ethanol and water. The compounds were evaluated against human, Escherichia coli and Toxoplasma gondii thymidylate synthase and against human, Escherichia coli and Toxoplasma gondii dihydrofolate reductase. The most potent inhibitor, ( 6 ) which has a 4′‐methoxy substituent on the side chain, has an IC₅₀=25 μM against human thymidylate synthase. Contrary to analogues of general structure 1 , electron donating or electron withdrawing substituents on the side chain of 2‐11 had little or no influence on the human thymidylate synthase inhibitory activity.     

Asymmetric anionic polymerizations of 7‐(o‐substituted phenyl)‐2,6‐dimethyl‐1,4‐benzoquinone methides: Electrostatic interaction and steric,inductive, and resonance effects of the ortho‐substituent on the optical activity

7‐(o‐Substituted phenyl)‐2,6‐dimethyl‐1,4‐benzoquinone methides which have an electron‐donating methoxy‐(o‐OMe, 2a ) and methyl‐ (o‐Me, 2b ) substituents or an electron‐withdrawing cyano‐ (o‐CN, 2c ) and trifluoromethyl‐ (o‐CF₃, 2d ) substituents at the ortho‐position of the aromatic ring and 7‐(m‐substituted phenyl)‐2,6‐dimethyl‐1,4‐benzoquinone methide with an electron‐withdrawing trifluoromethyl‐ (m‐CF₃, 2e ) substituent at the meta‐position of the aromatic ring were synthesized, and their asymmetric anionic polymerizations using the complex of lithium 4‐isopropylphenoxide with (?)‐sparteine were carried out in toluene at 0 °C. The polymers with negative optical activity were obtained for all of five monomers, and their specific rotation values largely changed depending upon the substituents of the monomers. On the basis of the comparison of various substituents effects, it was found that the specific rotation of obtained polymers is significantly affected by the electronic effects such as inductive and resonance effects rather than the steric and electrostatic effects of the substituent. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 1048–1058