Modulating microstructure and optical properties of hydrogenated nanocrystalline silicon photovoltaic materials prepared under hydrogen diluted silane PECVD by various DC bias

Hydrogenated nanocrystalline silicon (nc-Si:H) thin films were fabricated by plasma enhanced chemical vapor deposition under the various negative substrate bias voltages with hydrogen as a diluent of silane. The microstructure and optical properties of nc-Si:H thin films were studied by Raman scattering spectroscopy, X-ray diffraction (XRD), transmission electron microscopy, and optical transmission spectroscopy. Raman spectra and XRD pattern reveal that applying negative bias voltages at the moderate level favors the enhancement of crystalline volume fraction, increase of crystallite sizes and decrease of residual stress. We also demonstrated that the negative direct current bias can be used to modulate the volume fraction of voids, refractive index, absorption coefficient, compactness and ordered degree of nc-Si:H films. It is found that the film deposited at −80 V shows not only high crystallinity, size of crystallite, and static index n₀ but also low residual stress and volume fraction of voids. Furthermore, the microstructural evolution mechanism of nc-Si:H thin films prepared at different bias voltages is tentatively explored.     

Size dependence of the magnetic and hyperfine properties of nanostructured hematite (α-Fe 2 O 3 ) powders prepared by the ball milling technique

In this work we present the study of hematite (α-Fe₂O₃) nanostructures synthesized by the ball milling technique. The structural characterization and the crystallite size estimation have been carried out using the X-ray diffraction (XRD) technique. Data analyses indicate that the hematite phase (space group, R-3C) is preserved after the milling process. As the milling time is increased, a second phase (α-Fe) appears. The mean crystallite size shows a decreasing tendency as the milling time is increased. High-resolution transmission electron microscopy (HRTEM) images show the formation of grains composed of crystallites with irregular shapes. Mössbauer spectra of milled powders carried out at 297 and 77 K are well modeled with a histogram distribution of hyperfine fields. The presence of one additional sextet which corresponds to the ∝-Fe phase is also determined in agreement with XRD data analysis. Magnetic measurements suggest the suppression of the Morin transition in the milled samples and the absence of thermal relaxation effects in agreement with the Mössbauer spectroscopy results.     

Influences of Co doping on the structural and optical properties of ZnO nanostructured

Pure and Co-doped ZnO nanostructured samples have been synthesized by a chemical route. We have studied the structural and optical properties of the samples by using X-ray diffraction (XRD), field-emission scanning electron microscopy (FESEM), field-emission transmission electron microscope (FETEM), energy-dispersive X-ray (EDX) analysis and UV–VIS spectroscopy. The XRD patterns show that all the samples are hexagonal wurtzite structures. Changes in crystallite size due to mechanical activation were also determined from X-ray measurements. These results were correlated with changes in particle size followed by SEM and TEM. The average crystallite sizes obtained from XRD were between 20 to 25 nm. The TEM images showed the average particle size of undoped ZnO nanostructure was about 20 nm whereas the smallest average grain size at 3% Co was about 15 nm. Optical parameters such as absorption coefficient (α), energy band gap (E _g ), the refractive index (n), and dielectric constants (σ) have been determined using different methods.     

Microwave-assisted synthesis and optical property of CdMoO4 nanoparticles

Microwave-assisted synthesis is a novel method used to synthesize CdMoO₄ nanoparticles in propylene glycol. The effects of reaction time and microwave power on phase, morphologies, and optical properties of CdMoO₄ nanoparticles were studied, using X-ray diffraction (XRD), Raman spectroscopy, Fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM), and UV-visible spectroscopy. The present analyses proved that these crystalline powders were scheelite-type tetragonal structured CdMoO₄, with the crystallite size of 14-20 nm, and 4.51-4.73 eV band gaps, controlled by the synthetic conditions.     

Dry grinding effect on pyrophyllite–quartz natural mixture and its influence on the structural alternation of pyrophyllite

Infrared spectroscopy (IR), scanning electron microscopy (SEM), X-ray diffraction (XRD), and high-resolution transmission electron microscopy (HRTEM) with energy dispersive X-ray analysis (EDS) were used to investigate the evolution of mechanical destruction of the pyrophyllite structure and final ground products upon grinding with a laboratory planetary ball mill. The raw ore used in this present work was mainly composed of pyrophyllite and quartz. This pyrophyllite was more resistant toward mechanical destruction, and the crystalline order of pyrophyllite was not completely destroyed until grinding for 240 min with a 20:1 of weight ratio of the balls to powder. The existing crystalline phase in the final ground product was found to be quartz, which served as the associated phase in the original pyrophyllite mineral. The rate of destruction of pyrophyllite structure depended on the types of chemical bonds. Additionally, increasing the intensity of grinding resulted in acceleration of the mechanically induced amorphization of the pyrophyllite structure, whereas the associated quartz grains contributed to the deceleration of the amorphization of pyrophyllite.     

Nanoporous AlN particles production from a solid-state metathesis reaction

This paper reports that nanoporous AlN particles are synthesized from solid-state metathesis reactions using AlCl₃ and Mg₃N₂ as reactants. The samples are characterized by x-ray diffraction (XRD), transmission electron microscopy (TEM), selected area electron diffraction, high-resolution transmission electron microscopy (HRTEM), ultraviolet--visible (UV--vis) absorption spectroscopy and Raman spectroscopy. The results show that samples with walls 10 nm in thickness and pores between 10 nm and 100 nm in diameter were produced successfully from these reactions, and their band gap and vibration modes agree with those of AlN bulk crystal.     

Synthesis, structural and optical characterization of nanocrystalline ZnS:Cu embedded in silica matrix

The synthesis of Cu doped ZnS nanoparticles inside the pore of an inorganic silica gel matrix is presented. The synthesized nanoparticles were characterized by powder X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy dispersive X-ray (EDX). X-ray diffraction pattern reveals the crystalline wurtzite phase of ZnS. The existence of silica gel in modeling morphologies of the nanoparticles was characterized using Fourier transform infrared (FTIR) spectrometer. Thickness of the silica shell was also calculated. UV- absorption spectrum shows the appearance of an absorption peak at 273 nm which confirms the blue shift as compared to that of bulk ZnS. The photoluminescence (PL) emission spectrum of the sample showed a broad band in the range 465-510 nm due to the transition from the conduction band edge of ZnS nanocrystals to the acceptor like t₂ state of Cu.     

Synthesis of single crystalline GaN nanoribbons on sapphire (0001) substrates

Single crystalline GaN nanoribbons were synthesized through nitriding Ga₂O₃ thin films deposited on sapphire (0001) substrates by radio frequency magnetron sputtering. The component and structure of nanoribbons were investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray (EDX), transmission electron microscopy (TEM) and high-resolution transmission electron microscopy (HRTEM). The flat and smooth ribbon-like nanostructures are high quality single crystalline hexagonal wurtzite GaN. The thickness and width-to-thickness ratio of the grown GaN nanoribbons are in the range of 8-15 nm and ∼5-10, respectively.     

Oriented single crystalline TiO2 nano-pillar arrays directly grown on titanium substrate in tetramethylammonium hydroxide solution

Oriented single crystalline titanium dioxide (TiO₂) nano-pillar arrays were directly synthesized on the Ti plate in tetramethylammonium hydroxide (TMAOH) solution by one-pot hydrothermal method. The samples were characterized respectively by means of field-emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), and X-ray diffraction (XRD). Results showed that the TiO₂ nano-pillar with a tetrahydral bipyramidal tip grew vertically on the titanium substrate. HRTEM and Raman results confirmed that the TiO₂ nano-pillar arrays were single crystalline anatase. The controls of morphology, size, and orientation of the nano-pillar could be achieved by varying the solution concentration and hydrothermal temperature. Furthermore, the special morphology of the TiO₂ nano-pillar arrays was caused by the selectively absorption of the tetramethylammonium (TMA) through hydrogen bonds on the lattice planes parallel to (0 0 1) of anatase TiO₂. Less grain boundaries and direct electrical pathway for electron transferring were crucial for the superior photoelectrochemical properties of the single anatase TiO₂ nano-pillar arrays. This approach provides a facile in situ method to synthesize TiO₂ nano-pillar arrays with a special morphology on titanium substrate.     

Formation of nano-crystalline and amorphous phases on the surface of stainless steel by Nd:YAG pulsed laser irradiation

Thin surface layers consisting of nano-crystalline and amorphous phases on the surface of stainless steel have been attained under the Nd:YAG pulsed laser irradiation. The phases and microstructures were investigated by X-ray diffraction (XRD) and high resolution transmission electron microscope (HRTEM). The phase compositions of the surface determined by XRD were α-Fe (ferrite) and γ-Fe (austenite) or only γ-Fe in the near surface region on the bases of the different laser power densities. The nano-crystalline grains with sizes of 4-100 nm could result from high cooling rate and crystallization in amorphous region by homogeneous and heterogeneous nucleation. The formation of the amorphous phase was attributed to the higher cooling rates.     

Microstructure analysis of chemically synthesized wurtzite-type CdS nanocrystals

Microstructure of chemically synthesized wurtzite-type CdS nanocrystals have been investigated by X-ray diffraction (XRD) peak profile analysis by applying different forms of Williamson–Hall (WH) method viz., uniform deformation model (UDM), uniform stress deformation model (USDM) and uniform deformation energy density model (UDEDM), and transmission electron microscope (TEM) observations. The WH methods show the average crystallite size to be about 10 nm. Strain, stress and energy density of the nanocrystals are found to be 1.18 × 10 ^?2, 0.43 GPa and 2.27 kJ m ^?3, respectively. High-resolution TEM (HRTEM) results show the nanocrystals to be in spherical shape with an average crystallite size of 10 nm, thereby complementing the size estimation by WH methods. Further, HRTEM observations reveal the presence of edge dislocations and twin boundaries within the nanocrystals.     

Electrodeposition of nanocrystalline Zn-Ni alloy from alkaline glycinate bath containing saccharin as additive

Nanocrystalline Zn-Ni (crystallite sizes 13-68 nm) alloy coatings were produced from an alkaline glycinate bath containing saccharin as additive. X-ray diffraction (XRD) was used to determine the phase composition and average crystallite size of nanocrystalline Zn-Ni alloy coatings. The average grain size of a deposit was also studied by transmission electron microscopy (TEM). The effects of saccharin concentration and current density on the crystallite size and surface roughness of the coatings were studied. Crystallite size and average surface roughness were diminished as a result of increasing saccharin concentration. Scanning electron microscopy (SEM) examination showed that coatings had a colony-like morphology and the colony size was increased with increasing current density. Microhardness testing was carried out in order to determine the degree of dependence of this mechanical property on the crystallite size. It was found that microhardness did not depend on crystallite size (Hall-Petch).     

Sonochemical preparation of antimony subiodide

The substantiated isolation of the antimony subiodide (Sb₃I) is presented for the first time. It has been prepared using elemental Sb and I in ethanol under ultrasonic irradiation at 323 K. Its composition was characterized using X-ray photoelectron spectroscopy (XPS) and energy dispersive X-ray analysis (EDAX). The scanning electron microscopy (SEM) and high-resolution transmission electron microscopy (HRTEM) investigations exhibit that the samples are made up of large quantity of nanoparticles with diameters smaller than 20 nm and single crystalline in nature. The interplanar spacings in Sb₃I that have been determined using powder X-ray diffraction (XRD), selected area electron diffraction (SAED) and HRTEM are very similar. Surprisingly, the registered XRD patterns are identical to the one reported earlier for Sb₄O₅I₂.     

九江网纹红土中粘土矿物过渡相的矿物学特征及成因

为研究长江中下游网纹红土中粘土矿物过渡相的矿物学特征及成因,采用X射线衍射(XRD)、傅里叶红外吸收光谱(FTIR)、以及高分辨透射电子显微分析(HRTEM)等现代测试技术方法,对江西九江红土剖面网纹红土中粘土矿物过渡相开展系统、深入的研究。X射线衍射及红外吸收光谱分析结果表明,九江剖面网纹红土中粘土矿物组成主要有伊利石和高岭石,少量蒙脱石和伊利石/蒙脱石及微量高岭石/蒙脱石混层矿物过渡相。在高分辨透射电子显微镜下,可观察到蒙脱石晶层向高岭石晶层转化的现象。伊利石/蒙脱石过渡相是伊利石向蒙脱石转化的过渡产物,而高岭石/蒙脱石过渡相则为蒙脱石向高岭石转化的过渡产物,网纹红土中这两种过渡相的出现说明了粘土矿物风化演化的过程,即：伊利石→伊利石/蒙脱石混层矿物→蒙脱石→高岭石/蒙脱石混层矿物→高岭石的演化,同时表明网纹红土形成于风化作用增强的温暖潮湿气候环境。     

Green synthesis and characterization of gold nanoparticles using extract of anti-tumor potent Crocus sativus

In the present study, we have explored anti-tumor potent Crocus sativus (saffron) as a reducing agent for one pot size controlled green synthesis of gold nanoparticles (AuNps) at ambient conditions. The nanoparticles were characterized using UV–vis, scanning electron microscope (SEM), high resolution transmission electron microscopy (HRTEM), X-ray diffraction (XRD) and FTIR analysis. The prepared AuNPs showed surface Plasmon resonance centered at 549 nm with average particle size of 15±5 nm. Stable, spherical and triangular crystalline AuNPs with well-defined dimensions were synthesized using anti-tumor potent Crocus sativus (saffron). Crystalline nature of the nanoparticles is confirmed from the HR-TEM, SAED and SEM images, and XRD patterns. From the FTIR spectra it is found that the biomolecules are responsible for capping in gold nanoparticles.     

Synthesis, morphologies and Raman-scattering spectra of crystalline stannic oxide nanowires

SnO₂ nanowires were synthesized using a direct gas reaction route and were characterized by X-ray powder diffraction (XRD), scanning electron microscopy (SEM), selected-area electron diffraction (SAED), high-resolution transmission electron microscopy (HRTEM) and Raman-scattering spectroscopy. XRD, SEM, SAED and HRTEM indicated that the products were tetragonal SnO₂ nanowires with diameters of 10–50 nm. The nanowires were single crystal and solid inside. Dendritic nanowires were observed for the first time. Three vibrational modes were observed in the Raman spectra of the samples. Received: 7 January 2002 / Accepted: 11 April 2002 / Published online: 19 July 2002     

A facile route to synthesize titanium oxide nanowires via water-assisted chemical vapor deposition

Single crystalline rutile titanium oxide nanowires have been synthesized in bulk yield based on commercial metal titanium by a facile water-assisted chemical vapor deposition method. The morphology, crystallinity, and phase structure of the nanowires have been characterized by scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SAED), and X-ray diffraction (XRD). This growth strategy is applicable for commercial metal titanium substrate with different spatial dimensions, such as powder, network mesh, and flat foil. The as-synthesized nanowires are found to be mainly composed of single crystalline rutile TiO₂ nanowires in spiral shape with a small amount of hexagonal Ti₂O nanowires with zigzag form. A growth mechanism has been proposed to explain the novel spiral and zigzag types of titanium oxide nanowires under moderate temperature (850 °C). This method promises an alternative way for industrialization of titanium oxide nanowires which may serve as a good candidate for various industrial applications such as optoelectronic, electronic, and electrochemical nanodevices.     

Surface and interfacial structural characterization of MBE grown Si/Ge multilayers

Si/Ge multilayer structures have been grown by solid source molecular beam epitaxy (MBE) on Si (1 1 1) and (1 0 0) substrates and were characterized by high-resolution X-ray diffraction (XRD), atomic force microscopy (AFM), high-depth-resolution secondary ion mass spectroscopy (SIMS) and cross-section high-resolution transmission electron microscopy (HRTEM). A reasonably good agreement has been obtained for layer thickness, interfacial structure and diffusion between SIMS and HRTEM measurements. Epitaxial growth and crystalline nature of the individual layer have been probed using cross-sectional HRTEM and XRD measurements. Surface and interface morphological studies by AFM and HRTEM show island-like growth of both Si and Ge nanostructures.     

Crystal structure of iron-oxide nanoparticles synthesized from ferritin

We have investigated the crystal structure of nanosized iron-oxide by X-ray diffraction (XRD), extended X-ray absorption fine structure measurements at the iron K-edge as well as by transmission electron microscopy (TEM). Iron-oxide nanoparticles were produced by thermal treatment of horse spleen ferritin molecules. The structure of these particles was compared to α-Fe₂O₃ and γ-Fe₂O₃ nanopowder references. The thermal treatment of a submonolayer film of ferritin molecules results in pure γ-Fe₂O₃ nanoparticles, while for films above a certain thickness α-Fe₂O₃ and γ-Fe₂O₃ coexist, exhibiting two different crystallite sizes. TEM shows a characteristic particle diameter of ~7 nm for γ-Fe₂O₃ resulting from thermal treatment of monolayers, consistent with the crystallite size of the γ-phase as obtained from XRD measurements on multi-layered samples. XRD shows the α-Fe₂O₃ phase to be characterized by a crystallite size of ~34 nm.     

Effect of Fe doping on the structural and gas sensing properties of ZnO porous microspheres

Fe-doped ZnO porous microspheres composed of nanosheets were prepared by a simple hydrothermal method combined with post-annealing, and characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), Brunauer–Emmett–Teller N₂ adsorption–desorption measurements and photoluminescence (PL) spectra. In this paper we report Fe doping induced modifications in the structural, photoluminescence and gas sensing behavior of ZnO porous microspheres. Our results show that the crystallite size decreases and specific surface area increases with the increase of Fe doping concentration. The PL spectra indicate that the 4 mol% Fe-doped ZnO has higher ratio of donor (V_O and Zn_i) to acceptor (V_Zn) than undoped ZnO. The 4 mol% Fe-doped ZnO sample shows the highest response value to ppb-level n-butanol at 300 °C, and the detected limit of n-butanol is below 10 ppb. In addition, the 4 mol% Fe -doped ZnO sample exhibits good selectivity to n-butanol. The superior sensing properties of the Fe-doped porous ZnO microspheres are contributed to higher donor defects contents combined with larger specific surface area.