A comparative solvent extraction study of manganese(II) with 8-Mercaptoquinoline, 8-Quinolinol and its analogues

Equilibrium distribution coefficients were determined for the extraction of manganese(II) with 8-mercaptoquinoline, 8-quinolinol and its 2-methyl, 4-methyl, 5-chloro and 5-nitro analogues as a function of pH and reagent concentration at ambient temperature. 8-Mercaptoquinoline forms a mono self-adduct with Mn(II) whereas simple 12 chelate formation was observed in the case of 8-quinolines. The adduct formation constant and the overall formations constants in the aqueous phase have been determined. A linear relationship was observed between the equilibrium constants, formation constants and the pK values of the chelating agents.Synergic enhancement was observed in the extraction of Mn(II) with 8-mercaptoquinoline in presence of pyridine and its methyl derivatives and the adduct formation constants of the 12, chelate to nitrogen base, adducts were evaluated.     

Synergistic extraction of cobalt(II) with resacetophenone oxime in the presence of heterocyclic nitrogen and organophosphorous compunds

Equilibrium distribution coefficients have been determined, for the extraction of cobalt(II) with resacetophenone oxime as a function of pH and reagent concentration at ambient temperature. RAPOX forms simple 12 chelate with cobalt(II). Synergistic extraction was observed with pyridine and its methyl derivatives and some organophosphorous compounds. From the extraction equilibrium data, the adduct formation constants of 12 chelate to adducting ligand adducts were evaluated.     

High performance liquid chromatographic separation and UV determination of cobalt, copper iron and platinum in pharmaceutical preparations using bis(isovalerylacetone)ethylenediimine as complexing reagent

The reagent bis(isovalerylacetone)ethylenediimine(H₂IVA₂en) has been examined for HPLC separation and UV determination of cobalt, copper, iron and platinum using off-line precolumn derivatization and extraction in chloroform. The complexes of cobalt(II), cobalt(III), iron(II), iron(III) and the reagent have been subsequently separated on a Microsorb C-18 column. The complexes were eluted isocratically using ternary mixtures of methanol/water/acetonitrile. Detection was achieved by UV monitoring. Detection limits for Co(II), Co(III), Fe(II) and Fe(III) were 2.5–5.0 ng/injection, based on 0.5–1.0 g/ml with 5 l/injection. The concentration of cobalt(II) and cobalt(III) in aqueous solution have been determined. The presence of oxovanadium(IV), platinum(II), and nickel(II) did not affect the determinations. The HPLC method developed has been applied to the determination of cobalt, copper, iron and platinum in pharmaceutical preparations at the 30 g/g to 15 mg/g level and the obtained results were compared to those of atomic absorption spectrometry.     

Stable free-radical complexing reagents in applications of electron spin resonance to the determination of metals: Part 2. Spin-labelled iminooxime [1]

Possibilities for the determination of metals by means of the intensity of the e.s.r. signal of the chelate-fonning reagent, spin-labelled iminomonoxime — 4-oximinomethyl-2,2,5,5-tetramethyl-3-imidazoline-1-oxyl, have been studied. The dissociation constant of the oxime group (pK^T_a = 9.36 ± 0.08) and the reagent partition constant in the chloroform—water system (log K_D = 0.80 ± 0.11) are reported. The reagent extracts copper, cobalt and nickel into chloroform. Copper is extracted as its CuA₂, chelate (log K_D = 0.91 ± 0.03; log K_ex = -3.35 ± 0.09; log β₂, = 15.8 ± 0.2). Several properties of the spin-labelled and conventional oximes are compared. It is confirmed that a radical-containing substituent produces a strong electron-acceptor effect. Unusual extractive and e.s.r.- spectroscopic behaviour of cobalt is indicated; an adduct of the spin-labelled chelate with atmospheric oxygen seems to be formed. Methods for the determination of cobalt and nickel based on the extraction with spin-labelled oxime into chloroform and subsequent separation of the excess of reagent on a chromatographic column are described. The detection limits are 3 × 10^-7 M for cobalt and 10^-6 M for nickel.     

Synergic extraction of metals with α-acyl-d-camphor and optically active lewis bases

Solvent extraction of europium (III), zinc (II) cobalt (II) with α-acyl-d-camphor and optically active isomers of quinine and quinidine was studied in order to obtain information on chirality recognition based on adduct formation between a chiral metal chelate and optically active isomers. It was possible to differentiate clearly between the adduct formation of quinine and that of quinidine in the synergic extraction of cobalt and europium with 3-heptafluorobutyryl- d-camphor and cobalt with 3-trifluoroacetyl-d-camphor.     

Adduct formation of copper(II) chelates of 1-hydroxypyrazole 2-oxides with substituted pyridines

Equilibrium constants have been determined for the adduct formation of 10 copper(II) chelates of the derivatives of 1-hydroxypyrazole 2-oxide with nine substituted pyridines at room temperature in chloroform solution. These adducts were shown to have 1:1 stoichiometry. All the stabilities of the adducts were governed by: (1) σ-donating ability of the nitrogen atom in the substituted pyridines to the copper(II) chelates, (2) electron-attracting forces of substituents at the 3- and 4-positions of the phenyl ring in the chelate ligands, and (3) the magnitude of the polar substituent constant of the substituents in the pyrazole ring of the chelate ligands.     

A sensitive and simple extractive-spectrophotometric method for the determination of microgram amount of cobalt by using alpha-benzilmonoxime.

Alpha-benzilmonoxime has been used for the extraction and determination of cobalt at microgram amount. The reagent reacts with cobalt(II) in the pH range of 8.8 - 9.3 to form a yellow-color chelate, which is extracted in chloroform, toluene, and some other non-polar solvents. The chelate is stable in chloroform for about one day. Under the optimum conditions of the a-benzilmonoxime concentration and pH of 9.0, Beer's law was obeyed in the concentration range of 0.08 - 2.2 microg/ml cobalt. The molar absorptivity of the extracted species was 2.55 x 10(4) dm3/mol cm at 380 nm, with a detection limit of 0.01 microg/ml cobalt. Relative standard deviations of 0.4, 0.8 and 2.3% were found for the determination of cobalt concentrations of 2.2, 1.1 and 0.08 microg/ml, respectively. The effect of diverse ions on the determination of 1.00 microg/ml of cobalt has been studied. The method was applied to the determination of cobalt in vitamin B12 and B-complex ampoules, a Co2O3-Co3O4 laboratory chemical mixture and some synthetic alloy samples. The method is sensitive, simple, rapid and accurate.     

Extraction of tungsten with 8-hydroxyquinoline and some of its derivatives

The extraction of tungsten by chloroform solutions of 8-hydroxyquinoline(I), 2-methyl-8-hydroxyquinoline(II), 5,7-dibromo-8-hydroxyquinoline(III) and 8-mercaptoquinoline(IV), as a function of the concentration of tungsten and reagent and the acidity of the aqueous phase, has been studied. Evidence was obtained for the quantitative extraction of tungsten over a wide range of acidity. The degree of extraction of tungsten at 10(-5)M concentration with I,III and IV gives two maxima when plotted against acidity. The extraction maximum for the more acidic solutions lies in the region where the reagents exist in the protonated form and its position depends on the reagent used. It is suggested that different tungsten complexes are extracted, depending on the acidity of the aqueous phase.     

Reactions of cobalt resacetophenone oximate with heterocyclic nitrogen bases

Summary Adduct formation constants of the pyridine adducts of the cobalt(II) chelate of resacetophenone oxime in cyclohexanone have been determined spectrophotometrically. Spectral changes in the absorbance were observed in visible range. The stability of the cobalt adducts increases in the following order of the bases: pyridine<4-picoline<3,5-lutidine<1,10-phenanthroline<2,9-neocuproin<2,2-bipyridyl.     

Solvent extraction of Cu/II/ with 1,2,3-benzotriazole into chloroform

1,2,3-Benzotriazole/1,2,3-BT/ has been used for the extraction of Cu/II/ into chloroform. The effect of various parameters on the extraction coefficient of Cu/II/ was evaluated. The stoichiometry of metal:reagent, determined by the method of substoichiometric extraction and slope ratio was found to be 12. Separation factor for a number of elements in the extraction of Cu/II/ has been evaluated.     

Solvent extraction of Ni/II/ with isonitrosobenzoylacetone into chloroform

A method has been developed for the quantitative extraction of Ni/II/ with isonitrosobenzoylacetone /HINBA/ into chloroform. The effect of various parameters on the extraction coefficient value such as pH, time of equilibration, effect of solvents, anions, cations etc. have been studied. The stoichiometry of the metal: reagent determined by the method of substoichiometric extraction and slope ratio method was found to be 12. Decontamination factors for many elements in the substoichiometric extraction of Ni/II/ were also evaluated.     

Solvent extraction of cobalt/II/with 2,4-dihydroxyacetophenone thiosemicarbazone

The extraction of cobalt/II/ from ammonium chloride-ammonium hydroxide buffer solutions of pH 6.5 by 2,4-dihydroxyacetophenone thiosemicarbazone /DATS/ in n-butanol has been studied. Cobalt/II/ forms 11 complex /metal:reagent/ with DATS. Addition of pyridine enhances the extraction. The influence of metal concentration and the effect of diverse ions on the extraction of cobalt/II/ have been investigated.     

Solvent extraction of Zn(II), Cu(II) and Sb(III) with N-m-tolyl-p-methoxybenzohydroxamic acid (TMBHA) into chloroform

Rapid methods have been described for the quantitative extraction of milligram amounts of Zn(II), Cu(II) and Sb(III) with TMBHA into chloroform. The separation factor for many elements was found to be at least greater than 10⁴. The metal: reagent stoichiometry determined by methods like slope ratio, mole ratio and substoichiometric extraction were found to be 12 for Zn(II) and Cu(II), and 23 for Sb(III).     

Extractive separation of Cu<Superscript>2+</Superscript>–Co<Superscript>2+</Superscript> and Ni<Superscript>2+</Superscript>–Co<Superscript>2+</Superscript> mixtures using <Emphasis Type="Italic">N</Emphasis>-salicylideneaniline

A study on the extraction of copper(II), cobalt(II), and nickel(II) from solutions containing ions of both metals with N-salicylideneaniline(SAN) in chloroform has been realized. Distribution of the metal ions in wide range of pH has been studied. Extraction of copper(II) was always favored over that of cobalt(II). Extraction of copper(II) from binary metal solution is selective and it can be quantitatively separated from cobalt(II). The equilibrium constant of the extraction of cobalt and nickel from an aqueous solution containing both metals using SAN were evaluated. The separation factors for cobalt and nickel were expressed as a function of the distribution of nickel and cobalt. From these results, salicylideneaniline is an adequate extractant for extractive separation of such mixtures.     

Synergic extraction of nickel/II/ by 2-thenoyltrifluoroacetone and tribenzylamine in chloroform from perchlorate media

Synergic extraction of Ni/II/ at pH 1 to 10 was studied using a mixture of 2-thenoyltrifluoroacetone /HTTA/ and tribenzylamine /TBA/ in chloroform. The synergist TBA enhances the extraction of Ni/II/ by an order of 5 from pH 3 to 5 having ionic strength 0.1M /H⁺, ClO ₄ ^– /. The synergic adduct was found to be Ni/TTA/₂.2TBA. The equilibrium constants K_2,0 and K_2,2 and stability constant ₂,2 have been ascertained radiometrically. The influence of various cations and anions on the extraction of Ni/II/ has been examined under optimal conditions. Back extraction of the adduct species in different acids of varying concentrations has been studied.     

Synergistic effect of tris(4-isopropyltropolonato)cobalt(III) on the extraction of lanthanoid(III) with 2-thenoyltrifluoroacetone.

Synergistic enhancement of the extraction of lanthanoid(III) (Ln) with 2-thenoyltrifluoroacetone (Htta) in benzene has been found by the addition of tris(4-isopropyltropolonato)cobalt(III) (Co(ipt)3). The synergistic effect of Co(ipt)3 was ascribed to the formation of a 1:1 adduct of Ln(tta)3 with Co(ipt)3, i.e., a binuclear complex, in the organic phase. The adduct formation constant (beta s,1) determined by the extraction equilibrium analysis was reasonably consistent with that determined by spectrophotometry. The beta s,1 values decreased with increase in the atomic number of Ln and showed a large difference between light and heavy Ln. Spectroscopic studies were performed to explain the difference in the beta s,1 values. Electronic absorption spectra showed that the change in the structure of Co(ipt)3 complexed with the light Ln chelate is larger than that with the heavy Ln. The IR spectra showed the displacement of the coordinated water molecules of the light Ln chelates with Co(ipt)3. On the other hand, the adduct formation of heavy Ln was caused by the hydrogen bonding between Co(ipt)3 and the coordinated water of the Ln chelate.     

Solvent extraction of Co/II/ with isonitrosobenzoylacetone into chloroform

A rapid and selective method has been developed for the extraction of Co/II/ with isonitrosobenzoylacetone into chloroform. The effect of various parameters on the extraction coefficient value such as effect of pH, time of equilibration, effect of various cations and anions have been evaluated. The stoichiometry of metal to reagent determined by the method of substoichiometric extraction was found to be 12. It was further supported by the slope ratio method.     

A new method for the extraction of Hg(II) with thioethylacetoacetate into chloroform

A rapid method for the solvent extraction of Hg(II) into chloroform has been developed, employing thioethylacetoacetate (HETAcAc) as a extracting agent. The extraction of Hg(II) was better than 99% over the pH range 0.3 to 7.3. The extraction equilibrium was reached within 2 min. The effect of various parameters such as anions and cations, solvent effect, etc., on the extraction coefficient has been studied. The stoichiometry metal: reagent was determined by the method of substoichiometric extraction and was found to be 14.     

Cobalt(III)-8-mercaptoquinoline complexing in cobalt(III)hexacyanoferrate(II) gelatin-immobilized matrix systems

Novel complexing processes in binary systems containing Co^III and 8-mercaptoquinoline or its derivatives (5-Cl-, 5-Br-, 5-Me-, 5-Ph- and 5-SMe- 8-mercaptoquinoline), with a cobalt(III)hexacyanoferrate(II) gelatin-immobilized matrix in contact with an aqueous solution of the corresponding ligand, have been observed. Under the specific conditions described, three water-insoluble coordination compounds are formed in each of the systems indicated, whereas upon complexing in solution or the solid phase the formation of only one complex is observed.     

Structure and magnetic properties of 2,4,6,8-tetra(<Emphasis Type="Italic">tert</Emphasis>-butyl)phenoxazin-1-one adducts with cobalt(II) salts

Complex formation reaction of redox-active 2,4,6,8-tetra(tert-butyl)phenoxazin-1-one with cobalt(II) chloride leading to the dimeric adduct has been studied. UV spectroscopy studies have revealed the equilibrium of the formed adduct with dissociated form of the complex in the acetonitrile solution. In the presence of ethylene glycol, the complex formation with cobalt(II) perchlorate has afforded the high-spin trimolecular adduct. Crystal structure of the obtained adducts has been studied by means of X-ray diffraction analysis.