Macroscopic and spectroscopic characterization of selenate, selenite, and chromate adsorption at the solid–water interface of γ-Al2O3

The interaction of selenate, selenite, and chromate with the hydrated surface of γ-Al₂O₃ was studied using a combination of macroscopic pH edge data, electrophoretic mobility measurements, and X-ray absorption spectroscopic analyses. The pH edge data show generally increased oxyanion adsorption with decreasing pH, and indicate ionic strength-(in)dependent adsorption of chromate and selenate across the pH range 4–9, and ionic strength-(in)dependent adsorption of selenite in this pH range. The adsorption of chromate peaks at pH 5.0, whereas for selenate and selenite no pH adsorption maxima are observed. Electrophoretic mobility measurements show that all three oxyanions decrease the zeta potential of γ-Al₂O₃ upon adsorption; however, only selenite decreased the pH_PZC of the γ-Al₂O₃ sorbent. EXAFS data indicate that selenite ions are coordinated in a bridging bidentate fashion to surface AlO₆ octahedra, whereas no second-neighbor Al scattering was observed for adsorbed selenate ions. Combined, the results presented here show that pH is a major factor in determining the extent of adsorption of selenate, selenite, and chromate on hydrated γ-Al₂O₃. The results point to substantial differences between these anions as to the mode of adsorption at the hydrated γ-Al₂O₃ surface, with selenate adsorbing as nonprotonated outer-sphere complexes, chromate forming a mixture of monoprotonated and nonprotonated outer-sphere adsorption complexes, and selenite coordinating as inner-sphere surface complexes in bridging configuration.     

Preparation of Nano-Sized γ-Al2O3 Supported Iron Catalyst for Fischer-Tropsch Synthesis by Solvated Metal Atom Impregnation Methods

Two types of small iron clusters supported onγ-Al2O3-RT(dehydroxylated at room temperature) andγ-Al2O3-800 (dehydroxylated at 800℃) were prepared by solvated metal atom impregnation (SMAI) techniques. The iron atom precursor complex, bis(toluene)iron(0) formed in the metal atom reactor, was impregnated intoγ-Al2O3 having different concentrations of surface hydroxyl groups to study the effect of surface hydroxylation on the crucial stage of iron cluster formation. Catalysts prepared in this way were characterized by TEM, Mossbauer, and chemisorption measurements, and the results show that higher concentration of surface hydroxyl groups ofγ-Al2O3-RT favors the formation of more positively charged supported iron cluster Fen/γ-Al2O3-RT, and the lower concentration of surface hydroxyl groups ofγ-Al2O3-800 favors the formation of basically neutral supported iron cluster Fen/γ-Al2O3-800. The measured results also indicate that the higher concentration of surface hydroxyl groups causes the rapid decomposition of precursor complex, bis(toluene)iron(0), and favors the formation of relatively large iron cluster. Consequently, these two types of catalysts show different catalytic properties in Fischer-Tropsch reaction. The catalytic pattern of Fen/γ-Al2O3-RT in F-T reaction is similar to that of the unreducedα-Fe2O3 and that of Fen/γ-Al2O3-800 is similar to that of the reducedα-Fe2O3.     

Adsorption of -histidine on copper surface as evidenced by surface-enhanced Raman scattering spectroscopy

The adsorption of -histidine on a copper electrode from H₂O- and D₂O-based solutions is studied by means of surface-enhanced Raman scattering (SERS) spectroscopy. Different adsorption states of histidine are observed depending upon pH, potential, and the presence of the SO²⁻₄ and Cl⁻ ions. In acidic solutions of pH 1.2 the imidazole ring of the adsorbed histidine remains protonated and is not involved in the chemical coordination with the surface. The SO²⁻₄ and Cl⁻ ions compete with histidine for the adsorption sites. In solutions of pH 3.1 three different adsorption states of histidine are observed depending on the potential. Histidine adsorbs with the protonated imidazole ring oriented mainly perpendicularly to the surface at potentials more positive than −0.2 V. Transformation of that adsorption state occurs at more negative potentials. As this takes place, histidine adsorbs through the α-NH₂ group and the neutral imidazole ring. The Cl⁻ ions cause the protonation and detachment of the α-NH₂ group from the surface and the formation of the ion pair NH⁺₃ … Cl⁻ can be observed. In the neutral solution of pH 7.0 histidine adsorbs through the deprotonated nitrogen atom of the imidazole ring and the α-COO⁻ group at E ≥ −0.2 V. However, this adsorption state is transformed into the adsorption state in which the α-NH₂ group and/or neutral imidazole ring participate in the anchoring of histidine to the surface, once the potential becomes more negative. In alkaline solutions of pH 11.9 histidine is adsorbed on the copper surface through the neutral imidazole ring.     

Sorption behavior of Co(II) on γ-Al<Subscript>2</Subscript>O<Subscript>3</Subscript> in the presence of humic acid

The fate and transport of toxic metal ions and radionuclides in the environment is generally controlled by sorption reactions. The extent of sorption of divalent metal cations is controlled by a number of factors including cosorbing or complexing. In this work, the effects of pH, humic acid HA/Co(II) addition orders, ionic strength, concentration of HA, and foreign cations on the Co(II) sorption on γ-Al₂O₃ in the presence of HA were investigated. The sorption isotherms of Co(II) on γ-Al₂O₃ in the absence and presence HA were also studied and described by using S-type sorption model. The experimental results showed that the Co(II) sorption is strongly dependent on the pH values, concentration of HA, but independent of HA/Co(II) addition orders, ionic strength, and foreign cations in the presence of HA under our experimental conditions. The results also indicated that HA enhanced the Co(II) sorption at low pH, but reduced the Co(II) sorption at high pH. It was hypothesized that the significantly positive influence of HA at low pH on the Co(II) sorption on γ-Al₂O₃ was attributed to strong surface binding of HA on γ-Al₂O₃ and subsequently the formation of ternary surface complexes such as ≡S-OOC-R-(COO⁻) _x Co^2−x . Chemi-complexation may be the main mechanism of the Co(II) sorption on γ-Al₂O₃ in the presence of HA.     

Ternary [Al2O3–electrolyte–Cu] species: EPR spectroscopy and surface complexation modeling

Cu²⁺ binding on γ-Al₂O₃ is modulated by common electrolyte ions such as Mg²⁺, , and in a complex manner: (a) At high concentrations of electrolyte ions, Cu²⁺ uptake by γ-Al₂O₃ is inhibited. This is partially due to bulk ionic strength effects and, mostly, due to direct competition between Mg²⁺ and Cu²⁺ ions for the SO⁻ surface sites of γ-Al₂O₃. (b) At low concentrations of electrolyte ions, Cu²⁺ uptake by γ-Al₂O₃ can be enhanced. This is due to synergistic coadsorption of Cu²⁺ and electrolyte anions, and _. This results in the formation of ternary surface species (SOH₂SO₄Cu)⁺, (SOH₂PO₄Cu), and (SOH₂HPO₄Cu)⁺ which enhance Cu²⁺ uptake at pH < 6. The effect of phosphate ions may be particularly strong resulting in a 100% Cu uptake by the oxide surface. (c) EPR spectroscopy shows that at pH  pH_PZC, Cu²⁺ coordinates to one SO⁻ group. Phosphate anions form stronger, binary or ternary, surface species than sulfate anions. At pH  pH_PZC Cu²⁺ may coordinate to two SO⁻ groups. At pH  pH_PZC electrolyte ions and are bridging one O-atom from the γ-Al₂O₃ surface and one Cu²⁺ ion forming ternary [γ-Al₂O₃/elecrolyte/Cu²⁺] species.     

Catalytic performances and correlations with metal oxide band gaps of metal-tungsten mixed oxide catalysts in propane oxydehydrogenation

Summary Tungsten-based catalysts of the form X wt.% Na₂WO₄/support (where X = 5, 10, 50 or 75 and the support is either γ-Al₂O₃ or SiO₂) were prepared by impregnation method and tested for oxidative dehydrogenation of propane. The effects of Na₂WO₄ loadings on catalyst performances were more pronounced on γ-Al₂O₃ - supported sample. Individual first-row transition metals (V, Cr, Mn, Co, Ni or Zn) were doped on NaWSi. CoWSi exhibited the best improvement, with conversion of 10.7% and selectivity to propylene of 52.9% at 450^oC. The metal oxide band gaps were correlated with catalyst performances. At a constant propane conversion, strong correlations were observed between the band gaps and respective CO and CO₂ yields. This offers insight into relationship between the species conductivities and the products distributions.     

Single-Step Hydrothermal Synthesis of Biochar from H3PO4-Activated Lettuce Waste for Efficient Adsorption of Cd(II) in Aqueous Solution

Developing an ideal and cheap adsorbent for adsorbing heavy metals from aqueous solution has been urgently need. In this study, a novel, effective and low-cost method was developed to prepare the biochar from lettuce waste with H₃PO₄ as an acidic activation agent at a low-temperature (circa 200 °C) hydrothermal carbonization process. A batch adsorption experiment demonstrated that the biochar reaches the adsorption equilibrium within 30 min, and the optimal adsorption capacity of Cd(II) is 195.8 mg∙g⁻¹ at solution pH 6.0, which is significantly improved from circa 20.5 mg∙g⁻¹ of the original biochar without activator. The fitting results of the prepared biochar adsorption data conform to the pseudo-second-order kinetic model (PSO) and the Sips isotherm model, and the Cd(II) adsorption is a spontaneous and exothermic process. The hypothetical adsorption mechanism is mainly composed of ion exchange, electrostatic attraction, and surface complexation. This work offers a novel and low-temperature strategy to produce cheap and promising carbon-based adsorbents from organic vegetation wastes for removing heavy metals in aquatic environment efficiently.     

Removal of zinc metal ion (Zn) from its aqueous solution by kaolin clay mineral: A kinetic and equilibrium study

A laboratory batch study has been performed to study the effect of various physic-chemical factors such as initial metal ion concentration, solution pH, and amount of adsorbent, contact time and temperature on the adsorption characteristics of zinc (Zn²⁺) metal ions onto kaolin. It has been found that the amount of adsorption of zinc metal ion increases with initial metal ion concentration, contact time, solution pH but decreases with the amount of adsorbent and temperature of the system. Kinetic experiments clearly indicate that adsorption of zinc metal ion (Zn²⁺) on kaolin is a two steps process: a very rapid adsorption of zinc metal ion to the external surface is followed by possible slow decreasing intra-particle diffusion in the interior of the adsorbent which has also been confirmed by intra-particle diffusion model. The equilibrium time is found to be in the order of 60 min. Overall the kinetic studies showed that the zinc adsorption process followed pseudo-second-order kinetics among pseudo-first-order and intra-particle diffusion model. The different kinetic parameters including rate constant are determined at different initial metal ion concentration, solution pH, amount of adsorbent and temperature respectively. The equilibrium adsorption results are analyzed by both Langmuir and Freundlich models to determine the mechanistic parameters associated with the adsorption process. The value of separation factor, R_L from Langmuir equation also gives an indication of favorable adsorption. Finally thermodynamic parameters are determined at three different temperatures and it has been found that the adsorption process is exothermic due to negative ΔH° accompanied by decrease in entropy change and Gibbs free energy change (ΔG°).     

Hydrophobic Effects of o-Phenanthroline and 2,2′-Bipyridine on Adsorption of Metal(II) Ions onto Silica Gel Surface

The effects of o-phenanthroline and 2,2′-bipyridine on the adsorption of metal(II) (Fe, Co, Ni and Cu) ions onto silica gel surface have been studied. The adsorption is expressed in terms of the measured concentrations of both metal and ligand at equilibrium. Each adsorption of the four metal ions is increased with the presence of the ligands. In addition, adsorption increases slowly with pH at low pH values and then increases rapidly up to near the pK_a value of silica gel (≈6.5). The adsorption of each metal ion at low pH is increased with increased ligand concentration. However, at high pH the adsorptions of Fe(II) and Cu(II) are decreased with increased ligand concentration whereas the adsorptions of Co(II) and Ni(II) are always increased. At low pH values the ligand to metal ratio adsorbed on the silica gel surface is ca. 3:1 while at high pH values it is 1:1, 2:1, and 3:1, corresponding to the initial ligand to metal ion concentration ratio. The addition of ethanol to the phenanthroline-SiO₂ solution results in a decrease in the adsorption of phenanthroline. The effect of ethanol is also observed in the Fe(II)-phenanthroline-SiO₂ system. The behavior of the adsorption is interpreted qualitatively by hydrophobic expulsion, the formation of surface complexes, and electrostatic interaction. It is concluded that hydrophobic expulsion plays an important role in the adsorption of metal ions in the presence of hydrophobic ligands on silica gel surface.     

Hydrocracking of Tar Components from Hot Coke Oven Gas over a Ni/Ce-ZrO2/γ-Al2O3 Catalyst at Atmospheric Pressure

Ni/Ce-ZrO₂/γ-Al₂O₃ catalysts with different Ce-ZrO₂ contents and Ni loadings were prepared by a two step impregnation method and characterized by X-ray diffraction, transmission electron microscopy, N₂ adsorption, and temperature-programmed reduction. The catalysts were used for the hydrocracking of toluene and naphthalene, which were model tar compounds in hot coke oven gas, under atmospheric pressure at 800 °C. They showed excellent catalytic activity, stability, and some sulfur tolerance. Both toluene and naphthalene was converted into light fuel gases even at a low mole ratio of steam to carbon (S/C = 0.44). During the testing period of 7 h, no coke deposition was observed on the surface of the catalysts. The results indicated that the addition of Ce-ZrO₂ limited the sintering of Ni particles and enhanced the catalytic activity. The Ni/Ce-ZrO₂/γ-Al₂O₃ catalyst is promising for the direct removal of tar compounds in hot coke oven gas with low S/C ratios.     

The state of metals in the Pt/Al2O3 and (Pt-Cu)/Al2O3 catalysts as indicated by IR spectroscopy with isotope dilution of 12C16O with 13C18O molecules

Adsorption of ¹³C¹⁸O+¹²C¹⁶O mixtures on the Pt(2.9%)/γ-Al₂O₃, (Pt(2.6%)+Cu(2.7%))/γ-Al₂O₃, and (Pt(2.6%)+Cu(5.1%))/γ-Al₂O₃ catalysts was studied by FTIR spectroscopy. On the metallic Pt surface at coverages close to saturation, CO is adsorbed both strongly and weakly to form linear species for which the vibrational frequencies of the isolated ¹³C¹⁸O molecules adsorbed on Pt are ∼1940 and ∼1970 cm⁻¹, respectively. The redistribution of intensities of the high-and low-frequency absorption bands in the spectra of adsorbed ¹³C¹⁸O indicates that these linear forms are present on the adjacent metal sites. The weak adsorption is responsible for the fast isotope exchange between the gaseous CO and CO molecules adsorbed on metal. The Pt-Cu alloys, in which the electronic state of the surface Pt atoms characteristic of monometallic Pt remains unchanged, are formed on the surface of the reduced Pt-Cu bimetallic catalysts. The decrease in the vibrational frequencies of the isolated C=O bonds in the isolated Pt-CO complexes suggests that the CO molecules adsorbed on the Cu atoms affect the electronic properties of Pt. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 831–836, May, 2007.     

The chemistry of adsorbed Cu(II) and Mn(II) in aqueous titanium dioxide suspensions

We studied the adsorption behavior of Cu(II) and Mn(II) on the surface of titanium dioxide over the pH range from 2.0 to 11.5. The titanium dioxide we used in these experiments was prepared by hydrolyzing TiCl₄ and had a surface area of 113.7 m² g⁻¹. All suspensions, which were 9.04 × 10⁻³ M in NaClO₄, contained 20 m² liter⁻¹ of oxide surface and divalent metal ion concentrations sufficient (at full adsorption from solution) to cover the available surface with one-half, one, and four layers of close-packed, hydrated ions. Both divalent ions began adsorption below titanium dioxide's isoelectric point (pH = 6.2). Cu²⁺ adsorption was accompanied by net OH⁻ uptake from solution and it was inferred that the titania surface also provided OH⁻ for Cu²⁺ adsorption. ESR spectra demonstrate the coexistence of two distinct forms adopted by these metal ions on the surface. A portion of the adsorbed metal ions occupies sites magnetically isolated one from another, as evidenced by the paramagnetic behavior of this form. The majority of the metal ions, however, exist in hydrous-metal-ion clusters in which spin-exchange coupling of the electron dipoles determines the magnetic behavior. Electrophoretic mobility measurements indicate that ions adsorbed at isolated sites exert a stronger influence on the electrophoretically measured charge of the suspension particles than ions in clusters. Even though these experiments were performed in the absence of oxygen, we observed the oxidation of a limited amount of the Mn(II) on the surface as low as pH = 5. Presumably this occurs as a result of electron transfer between photo-induced electron holes and Mn(II) on the surface.     

Modeling of Equilibrium Adsorption and Surface Tension of Cationic Gemini Surfactants

A series of equilibrium tension models are used to evaluate the adsorption behavior of a novel class of lipoaminoacid gemini cationic surfactants, N^α,N^ω-bis(long-chain N^α-acylarginine)α,ω-dialkylamides or bis(Args). For purposes of comparison, the monomer LAM (the methyl ester of N^α-lauroyl arginine) was also examined. These surfactants are of particular interest for both their low toxicity and biocompatibility. The tension models are based on the Gibbs adsorption isotherm and classified as “ionic” when the surface charge and the electric double layer are accounted for or as “pseudo-nonionic” when the surface charge is ignored. Both model predictions and fitted parameter values are evaluated with respect to physical plausibility and overall goodness of fit to the available tension and density data. In particular, the inferred values for the standard Gibbs free energy of adsorption ΔG°, determined from an equilibrium constant defined on a nondimensional basis, without including artifacts due to an electrostatic contribution, are analyzed. The most reliable values of ΔG° are found with the combined model to range from −110 to −120 kJ mol⁻¹ for the three dimers examined and −80 kJ mol⁻¹ for the monomer. For spacer chain lengths n=3, 6, or 9, the maximum surface area of surfactant adsorption and the maximum free energy of adsorption are observed for the surfactant with the spacer chain length of 6.     

Adsorption mechanism of Cu from aqueous solution by chitosan-coated magnetic nanoparticles modified with α-ketoglutaric acid

In order to better understand the adsorption mechanism of chitosan-coated magnetic nanoparticles modified with α-ketoglutaric acid (α-KA-CCMNPs), the removal of Cu²⁺ by α-KA-CCMNPs from aqueous solution was investigated in a batch system at 18, 35 and 50 °C. Different experimental approaches were applied to show mechanistic aspects, such as adsorption isotherms, kinetics and thermodynamics studies. Adsorption equilibrium studies showed that Cu²⁺ adsorption followed Langmuir model. The kinetics of the interactions was best described by pseudo-second-order mechanism. The thermodynamic parameters (ΔG°, ΔH° and ΔS°) analysis predicted that the adsorption process was strongly dependent on temperature of medium, and spontaneous and endothermic process. The XPS combined with FT-IR spectra revealed that N atom of –NH– group and O atom of carboxyl group in α-KA-CCMNPs coordinated with Cu²⁺. Experimental results from this study provide data that would be required if this heavy metal adsorption system was to be “scaled up” for industrial application.     

Surface film pressure of β-lactoglobulin, α-lactalbumin and bovine serum albumin at the air/water interface studied by wilhelmy plate and drop volume

The surface film pressure (II) of β-lactoglobulin, α-lactalbumin, and bovine serum albumin was studied in simulated milk ultrafiltrate (SMUF) and in water at concentrations from 10⁻⁶ up to 1% (w/v) at times from 30 s to 14 h and the results were analyzed with regard to adsorption transport and kinetics. In SMUF at low concentrations, β-lactoglobulin was the most “surface active” protein. There was little difference in the surface film pressure between β-lactoglobulin and α-lactalbumin at high concentrations. Bovine serum albumin showed the lowest surface activity, but did not reach a constant II, even after 14 h. As the pH approached the isoelectric point, the surface film pressure increased, and in the case of bovine serum albumin II increased faster. In water, however, the surface film pressures were lower than in SMUF, and for bovine serum albumin II developed more slowly. The transport to the interface was found to be controlled by diffusion only for a small concentration range of approximately 10⁻⁴%. It was controlled by initial flow disturbances at higher concentrations and free convection at lower concentrations. The rate of increase of the surface film pressure was not a simple function of surface film pressure and bulk concentration under any of the conditions studied.     

Vibration Spectroscopy Study of Phenylphosphonate at the Water–Aluminum (Hydr)Oxide Interface

Two previously published surface complexation models of phenylphosphonate on aged γ-Al₂O₃and boehmite (γ-AlOOH), respectively, have been examined by means of FTIR and FT-Raman spectroscopy. The spectral features of adsorbed phenylphosphonate were studied as a function of pH and total phenylphosphonate concentration. No evidence for a phase transformation into a three-dimensional aluminum phenylphosphonate phase was found. This suggested that phenylphosphonate is sorbed as surface complexes under the conditions used in this study. Both the infrared and the Raman data showed that the surface-bound phenylphosphonate ions undergo protonation reactions as pH is varied. These results together with the fact that the ligand has only two donor atoms for complexation and protonation led to the conclusion that a monodentate coordination to the surface is most likely in both systems. Overall, the spectroscopic results were in good qualitative agreement with the thermodynamic surface complexation models.     

Interaction of a Co<Subscript>6</Subscript> cluster with oxides of different nature: a quantum chemical study

Density functional theory was applied to investigate the interaction of Co₆ nanoparticle with various oxide supports including γ-Al₂O₃, silicalite, and zeolite HZSM-5. The introduction of cobalt into silicalite leads to insignificant stabilization of the metal cluster and induction of a small positive charge. The interaction of the Co₆ particle with the acid zeolite or alumina is accompanied by transfer of either a proton from the Br?nsted acid site or hydrogen atoms from terminal OH groups to the surface of the metal cluster with the formation of a hydride-like complex cation. Geometric parameters and energy characteristics of adsorption complexes of carbon monoxide molecule with Co₆ particles on different supports were calculated. For isolated particle on silicalite, “linear” adsorption is predicted. According to calculations, one can expect “angular” adsorption in the case of the acid zeolite and “two-point” adsorption (precursor of active surface carbon) in the system Co₆/γ-Al₂O₃.     

Porous nanographene formation on γ-alumina nanoparticles via transition-metal-free methane activation

γ-Al₂O₃ nanoparticles promote pyrolytic carbon deposition of CH₄ at temperatures higher than 800 °C to give single-walled nanoporous graphene (NPG) materials without the need for transition metals as reaction centers. To accelerate the development of efficient reactions for NPG synthesis, we have investigated early-stage CH₄ activation for NPG formation on γ-Al₂O₃ nanoparticles via reaction kinetics and surface analysis. The formation of NPG was promoted at oxygen vacancies on (100) surfaces of γ-Al₂O₃ nanoparticles following surface activation by CH₄. The kinetic analysis was well corroborated by a computational study using density functional theory. Surface defects generated as a result of surface activation by CH₄ make it kinetically feasible to obtain single-layered NPG, demonstrating the importance of precise control of oxygen vacancies for carbon growth.

Oxygen vacancies on the (100) surface of γ-Al₂O₃ nanoparticles catalyse CH₄-CVD for single-layered nanoporous graphenes with no transition metal reaction centre. The rate-limiting step is the proton transfer (PT) in the activation of CH₄ on them.     

On the molecular models of lewis acid sites on the surface of γ-Al2O3 and in zeolites: a density functional study of CO adsorption

Adsorption complexes of CO-Lewis acid sites with 3- and 5-coordinated Al³⁺ are modeled by the density functional method using the cluster approach. Cluster models of the site with 4-coordinated Al³⁺ on the surface of γ-Al₂O₃ and in zeolites are suggested. For these models of adsorption complexes, C-O vibration frequencies are calculated and the energetics of CO adsorption is evaluated. Translated fromZhurnal Struktumoi Khimii, Vol. 38, No. 5, pp. 834–839, September–October, 1997.     

Syntheses and Characterization of the First Cycloheptatrienyl Transition-Metal Complexes with a M-CF3 Bond

The organometallic chemistry of metal complexes with organocyclic ligands of higher than five hapticity is much more lacking than the chemistry of metal complexes with η⁵-cyclopentadienyl ligands, which has been explored in considerable depth, resulting in novel advances. The main reason for this is stability. In particular, reports indicate that (η⁷-C₇H₇)ML_n complexes are considerably less stable than analogous (η⁵-C₅H₅)ML_n. In perfluoroalkyl metal chemistry, there is currently no reported (η⁷-C₇H₇)ML_n derivative, whereas a number of alkylated ones are known and important conclusions have been drawn about their stability. Responding to this void, and using Morrison’s trifluoromethylating reagent, the present study reports the synthesis and characterization of the first cycloheptatrienyl molybdenum complexes bearing the trifluoromethyl moiety; (η⁷-C₇H₇)Mo(CO)₂CF₃ (I), and (η⁷-C₇H₇)Mo(CO)(PMe₃)CF₃ (II) and discusses their low thermal instability.