X-ray micro-imaging by capillary optics

In this work the results on X-ray micro-imaging by means of novel polycapillary optical elements will be presented. To simulate various radiation propagation processes in both single capillary and polycapillary systems, a PolyCAD code was developed. The new experimental results on radiation redistribution by novel capillary lenses in comparison with simulated data will be reported. The images of characterized extended samples (~ 3 mm) were recorded with 6 μm resolution, the maximum provided by CCD. Polycapillary Optics CAD software X-ray tracing Imaging Confocal 02.60.Cb 02.70.-c 41.50. + h 42.15.-i 42.15.Dp 42.30.-d.     

Energy-resolved X-ray imaging

An investigation method of spatial distribution of separate chemical elements, contained in samples complex chemical composition, using an X-ray CCD-camera is considered. The camera records a fluorescence of the chemical elements of the sample, excited by a radiation of a static X-ray tube. An image is built at a CCD matrix with a pinhole camera. The CCD-camera operates in a regime of a multi-frame spectral recording of separate photons, in which it is possible to identify both the energy of the incident quanta, and the coordinate of the point of incidence in each frame. Analysis of the formed data array makes it possible to obtain the spatial distribution of the elements, contained in the sample discretely on Z (atomic number). Investigation results of the CCD-camera characteristics, algorithms of the computer software of the data processing, and examples of the obtained images are presented in the paper. It is shown that using this method it is possible to get distribution patterns of the chemical elements in the multi-component samples with the spatial distribution up to ≈ 15–20 μm.     

Performance of a gaseous detector based energy dispersive X-ray fluorescence imaging system: Analysis of human teeth treated with dental amalgam

Energy dispersive X-ray fluorescence (EDXRF) imaging systems are of great interest in many applications of different areas, once they allow us to get images of the spatial elemental distribution in the samples. The detector system used in this study is based on a micro patterned gas detector, named Micro-Hole and Strip Plate. The full field of view system, with an active area of 28 × 28 mm² presents some important features for EDXRF imaging applications, such as a position resolution below 125 μm, an intrinsic energy resolution of about 14% full width at half maximum for 5.9 keV X-rays, and a counting rate capability of 0.5 MHz. In this work, analysis of human teeth treated by dental amalgam was performed by using the EDXRF imaging system mentioned above. The goal of the analysis is to evaluate the system capabilities in the biomedical field by measuring the drift of the major constituents of a dental amalgam, Zn and Hg, throughout the tooth structures. The elemental distribution pattern of these elements obtained during the analysis suggests diffusion of these elements from the amalgam to teeth tissues.     

Three-dimensional conic beam X-ray microtomography in bone quality

In recent years, the 3D X-ray microcomputed tomography (3DμCT) has become a useful method to access the internal geometry based microarchitecture of bones. All measurements are based on the image quality. In this context, the aim of this work is to investigate bone quality in terms of strength parameters determined by 3DμCT. The system that was used to do the 3DμCT was a microfocus Fein Focus which has a microfocus X-ray tube, adjustment of the magnification factor of the captured image by mobile supports and an image intensifier with a diameter of 9 in. The results show that microtomography by microfocus X-ray tube is a powerful technique that can be used to analyze bone microstructures. A quantification procedure conducted with a locally developed program, produced images with 20 μm of resolution for different bone samples.     

The investigations on K and L X-ray fluorescence parameters of gold compounds

The study aimed to determine the chemical effects on the K and L X-ray intensity ratios and the K and L X-ray production cross sections for gold compounds. The K shell fluorescence yields and L shell average yields were also investigated. The samples were excited by 59.5 keV γ-rays from an ²⁴¹Am annular radioactive source and 123.6 keV γ-rays from a ⁵⁷Co annular radioactive source. K and L X-rays emitted from samples were counted by an Ultra-LEGe detector with a resolution of 0.150 keV at 5.9 keV. The experimental values were compared with theoretical, the semi-empirical and other experimental values.     

Characterization of the 3-dimensional microstructure of a graphite negative electrode from a Li-ion battery

The 3-dimensional microstructure of a porous electrode from a lithium-ion battery has been characterized for the first time. We use X-ray tomography to reconstruct a 43 × 348 × 478 μm sample volume with voxel dimensions of 480 nm, subsequent division of the reconstructed volumes into sub-volumes of different sizes allow us to determine microstructural parameters as a function of sub-division size. We show that the minimum size for a representative volume element is about 43 × 60 × 60 μm for volume-specific surface area, but as large as the full sample volume for porosity and tortuosity.     

Iron,copper, zinc and bromine mapping in cirrhotic liver slices from patients with hemochromatosis studied by microscopic synchrotron radiation X-ray fluorescence analysis in continuous scanning mode

Iron (Fe) and copper (Cu) are essential metals in physiological cell metabolism. While Fe is easy to determine biochemically in histological slices, Cu and zinc (Zn) distribution is frequently critical in confirming the presence of an overload in disturbed Fe/Cu metabolism. To analyze Fe, Cu and Zn in a near histological resolution, energy dispersive microscopic synchrotron radiation X-ray fluorescence was applied.In normal liver tissue, after fixation and imbedding in paraffin, mean Fe, Cu and Zn concentrations were 152 ± 54, 20.1 ± 4.3 and 88.919.5 μg/g sample weight, respectively. No substantial, characteristic differences in their distribution were found in the two-dimensional scans. In slices from patients with hemochromatosis mean Fe, Cu and Zn concentrations were 1102 ± 539, 35.9 ± 14.6 and 27.2 ± 6.7 μg/g sample weight, respectively. Additionally, a significant decrease in phosphorus and sulphur concentrations existed. An increased Cu around cirrhotic regenerations nodules is mostly associated with a lymphocytic infiltration in this region. Analyzing concentrations of Fe in different regions of the samples show a clear negative dependency between Fe and Cu, Cu and Zn, but a positive one between Fe and Zn.Conclusion: With a focal beam size of 15 μm in diameter a resolution of the elemental distribution was achieved which is widely comparable with stained histological slices (20× light microscope). The analysis of simultaneous determined elements reveals metabolic differences between Fe, Cu and Zn in liver tissue from patients with hemochromatosis.     

Wavelength dispersive X-ray fluorescence imaging using a high-sensitivity imaging sensor

A new wavelength-dispersive X-ray fluorescence (WD-XRF) imaging spectrometer equipped with a high-sensitivity imaging sensor was developed in our laboratory. In this instrument, a straight polycapillary optic was applied instead of a Soller slit as well as a 2D imaging X-ray detector instead of X-ray counters, which are used in conventional WD-XRF spectrometers. Therefore, images of elemental distribution were available after a short exposure time. Ni Kα images and Cu Kα images were clearly obtained at corresponding diffraction angles for a short exposure time of 10 s. By optimizing the spectrometer, the time required for imaging is reduced, leading to XRF image movies. It is difficult to distinguish two peaks (Ti Kα (4.508 keV) and Ba Lα (4.465 keV)) due to the poor energy resolution of EDXRS. However, Ti and Ba images could be successfully observed by the WD-XRF imaging spectrometer. The energy resolution of the developed spectrometer was 25 eV at the Ti Kα peak.     

Automated nanoliter solution deposition for total reflection X-ray fluorescence analysis of semiconductor samples

In this study, a BioDot BioJet dispensing system was investigated as a nanoliter sample deposition method for total reflection X-ray fluorescence (TXRF) analysis. The BioDot system was programmed to dispense arrays of 20 nL droplets of sample solution on Si wafers. Each 20 nL droplet was approximately 100 μm in diameter. A 10 × 10 array (100 droplets) was deposited and dried in less than 2 min at room temperature and pressure, demonstrating the efficiency of the automated deposition method. Solutions of various concentrations of Ni and Ni in different matrices were made from stock trace element standards to investigate of the effect of the matrix on the TXRF signal. The concentrations were such that the levels of TXRF signal saturation could be examined. Arrays were deposited to demonstrate the capability of drying 100 μL of vapor phase decomposition-like residue in the area of a typical TXRF detector.     

Surface structures and electrochemical characteristics of surface-modified carbon anodes for lithium ion battery

Petroleum coke and those heat-treated at 1860 °C, 2100 °C, 2300 °C 2600 °C and 2800 °C (abbreviated as PC, PC1860, PC2100, PC2300, PC2600 and PC2800) were fluorinated by elemental fluorine of 3 × 10⁴ Pa at 200 °C and 300 °C for 2 min. Natural graphite powder samples with average particle sizes of 5 μm, 10 μm and 15 μm (abbreviated as NG5μm, NG10μm and NG15μm) were also fluorinated by ClF₃ of 3 × 10⁴ Pa at 200 °C and 300 °C for 2 min. Transmission electron microscopic (TEM) observation revealed that closed edge of PC2800 was destroyed and opened by surface fluorination, which increased the first coulombic efficiencies of PC2300, PC2600 and PC2800 by 12.1–18.2% at 60 mA/g and by 13.3–25.8% at 150 mA/g in 1 mol/dm³ LiClO₄–ethylene carbonate (EC)/diethyl carbonate (DEC) (1:1 in volume). Light fluorination of NG10μm and NG15μm increased the first coulombic efficiencies by 22.1–28.4% at 150 mA/g in 1 mol/dm³ LiClO₄–EC/DEC/PC (PC: propylene carbonate, 1:1:1 in volume).     

Evaluation of the diffusion of Mn,Fe, Ba and Pb in Middle Ages human teeth by synchrotron microprobe X-ray fluorescence

Human teeth from the Middle Ages have been analysed using a synchrotron microprobe evaluating Mn, Fe, Ba and Pb diffusion from the soil into the tooth structure. It is apparent that post-mortem teeth of ancient populations are influenced by the endogenous environment. The diffusion pattern of some elements can give information both for archaeological purposes and diagenesis processes affecting the apatite ante-mortem elemental content.An X-ray fluorescence set-up with microprobe capabilities, 100 μm of spatial resolution and energy of 18 keV, installed at LURE synchrotron (France) was used. Line scans were performed along the several regions of the teeth, in steps of 100 to 1000 μm. Ba is much enriched in ancient teeth when compared to recent ones, where this element is almost non-existent. Furthermore, the concentration profiles show increased levels of this element close to the external enamel region, reaching values up to 200 μg g^− 1 decreasing in dentine and achieving a steady level in the inner dentine and root. Pb concentration profiles show strongly increased levels of this element close to the external enamel region (20 μg g^− 1), decreasing strongly to the inner part of the dentine (0.5 μg g^− 1) contrarily to the normal situation in modern citizens where the highest concentrations for Pb are in the inner root dentine. This behaviour suggests post-mortem uptake from the soil; the presence of elevated levels of Pb can be explained by the fact that this burial place was a car park for more than 20 years.The distribution of Mn and Fe follow very similar patterns and both are very much enriched especially in the outer surfaces in contact with the soil, showing strong contamination from the soil.     

HPLC-PDA analysis of ACE-inhibitors,hydrochlorothiazide and indapamide utilizing design of experiments

A simple, rapid, precise, accurate and sensitive high performance liquid chromatographic method has been developed for simultaneous determination of ACE inhibitors with hydrochlorothiazide and indapamide in pharmaceutical formulations. ‘Design of Experiments’ (DoE) using ‘central composite design’ (CCD) was applied to facilitate method development and optimization. Mobile phase was optimized utilizing response surface methodology using Design Expert software. Chromatographic separation was achieved on Hypersil®-Gold C₁₈ (100 × 4.6 mm, 3 μm, Thermo Fisher Scientific, USA), column at 25 °C. The mobile phase was 58% buffer (5 mM KH₂PO₄, containing triethylamine 0.25 ml/L), 25% acetonitrile and 17% methanol (pH adjusted to 2.8 ± 0.1). The analysis was performed at 215 nm. The mobile phase flow rate was 1.0 ml/min and injection volume 10 μl. The method was validated for linearity, limits of quantitation and detection, accuracy, precision, ruggedness and robustness as per the International Conference on Harmonization (ICH) guidelines. Calibration curves (for lisinopril, hydrochlorothiazide, captopril, imidapril, perindopril, indapamide and trandolapril) were linear in the concentration range of 5–35 μg/ml. The limit of detection and limit of quantitation for experimental drugs ranged from 0.03 to 0.61 and 0.08–1.84 μg/ml respectively.     

Transdermal microneedle sensor arrays based on palladium: Polymer composites

The solvent based casting of metal particle-polymer mixtures has been investigated as a rapid means through which to produce a 10 × 10 array of pyramidal (200 × 200 × 350 μm) microneedles for electroanalytical sensing applications. The incorporation of nanoparticulate palladium powder within either a polycarbonate or polystyrene binder is shown to result in mechanically robust microneedles. The electrochemical properties of the resulting structures have been investigated and their application for transdermal sensing applications has been demonstrated through the use of epidermal/skin mimic.     

K-edge angiography utilizing a tungsten plasma X-ray generator in conjunction with gadolinium-based contrast media

The tungsten plasma flash X-ray generator is useful in order to perform high-speed enhanced K-edge angiography using cone beams because K-series characteristic X-rays from the tungsten target are absorbed effectively by gadolinium-based contrast media. In the flash X-ray generator, a 150 nF condenser is charged up to 80 kV by a power supply, and flash X-rays are produced by the discharging. The X-ray tube is a demountable diode, and the turbomolecular pump evacuates air from the tube with a pressure of approximately 1 mPa. Since the electric circuit of the high-voltage pulse generator employs a cable transmission line, the high-voltage pulse generator produces twice the potential of the condenser charging voltage. At a charging voltage of 80 kV, the estimated maximum tube voltage and current were approximately 160 kV and 40 kA, respectively. When the charging voltage was increased, the characteristic X-ray intensities of tungsten K_α lines increased. The K_α lines were clean, and hardly any bremsstrahlung rays were detected. The X-ray pulse widths were approximately 110 ns, and the time-integrated X-ray intensity had a value of approximately 0.35 mGy at 1.0 m from the X-ray source with a charging voltage of 80 kV. Angiography was performed using a film-less computed radiography (CR) system and gadolinium-based contrast media. In angiography of non-living animals, we observed fine blood vessels of approximately 100 μm with high contrasts.     

Picoliter solution deposition for total reflection X-ray fluorescence analysis of semiconductor samples

A deposition system capable of delivering picoliter quantities of solution in programmable arrays was investigated as a method for sample preparation for total reflection X-ray fluorescence (TXRF) spectroscopy. Arrays of trace metals in solution were deposited on Si wafers. The array deposits provide a capability of depositing closely spaced (100 μm or less), typically 5–20 μm diameter droplets in an area that can be matched to the analysis spot of the TXRF detector. The dried depositions were physically characterized and the effect of deposition type and matrix on the TXRF signal was investigated.     

Microwave-radiated synthesis of gold nanoparticles/carbon nanotubes composites and its application to voltammetric detection of trace mercury(II)

Gold nanoparticles/carbon nanotubes (Au-NPs/CNTs) composites were rapidly synthesized by microwave radiation, and firstly applied for the determination of trace mercury(II) by anodic stripping voltammetry (ASV). The structure and composition of the synthesized Au-NPs/CNTs nanocomposites were characterized by transmission electron microscopy (TEM), energy dispersive X-ray spectroscopy (EDX), UV–vis absorption spectroscopy and cyclic voltammetry. Au-NPs/CNTs nanocomposites modified glassy carbon electrode (Au-NPs/CNTs/GCE) exhibited excellent performance for Hg(II) analysis. A wide linear range (5 × 10⁻¹⁰–1.25 × 10⁻⁶ mol/L) and good repeatability (relative standard deviation of 1.84%) were obtained for Hg(II) detection. The limit of detection was found to be 3 × 10⁻¹⁰ mol/L (0.06 μg/L) at 2 min accumulation, while the World Health Organization’s guideline value of mercury for drinking water is 1 μg/L, suggesting the proposed method may have practical utility.     

The energy spectrum of 662 keV photons in a water equivalent phantom

Investigation is made on the energy spectrum of photons originating from interactions of 662 keV primary gamma-ray photons emitted by a point source positioned at the centre of a water equivalent solid phantom of dimensions 19 cm×19 cm×24 cm. Peaks resulting from total energy loss (photopeak) and multiple and back scattering have been observed using a 51 mm×51 mm NaI(Tl) detector; good agreement being found between the measured and simulated response functions. The energy spectrum of the gamma photons obtained through the Monte Carlo simulation reveals local maxima at about 100 keV and 210 keV, being also observed in the experimental response function. Such spectra can be used as a method of testing the water equivalence of solid phantom media before their use for dosimetry measurements.     

High temperature superconductor micro SQUID magnetometer for molecular-based magnets

We have developed a high temperature superconductor (HTS) micro SQUID magnetometer for molecular-based magnets. By employing the dipole approximation, we verified the flux value of 40Φ₀ from the saturation magnetic moment of the ferrimagnetic microcrystal of [Mn₂(H₂O)₂(CH₃COO)][W(CN)₈] · 2H₂O (15 × 15 × 13 μm). Considering the relative arrangement of the sample and the SQUID loop, including the influence of the film and grease, the calculated the flux values were Φ = 71Φ₀ and 31Φ₀ at distances of 20 and 30 μm between the sample bottom face and the SQUID plane, respectively. Thus, the experimentally obtained flux value is reasonable.     

Ion-pairing and reversed phase liquid chromatography for the determination of three different quinolones: Enrofloxacin,lomefloxacin and ofloxacin

Two simple and sensitive high performance liquid chromatographic (HPLC) methods have been developed for the simultaneous determination of three different quinolones: enrofloxacin, lomefloxacin and ofloxacin in their pure and dosage forms, one with reversed phase HPLC and the other with ion-pair HPLC. In reversed phase HPLC, method (A), the mobile phase consists of 2.18% aqueous solution of KH₂PO₄ with pH adjusted to 2.4 ± 0.2 with acetonitrile (80:20; v/v), the mobile phase pumped at flow rate of 1.2 ml min^?1. A Neucleosil C₁₈ column (10 μm, 100 Å), 250 mm length × 4.6 mm diameter was utilized as stationary phase. Detection was affected spectrophotometrically at 294 nm. While in ion-pair HPLC, method (B), the mobile phase was aqueous solution of 0.65% sodium perchlorate and 0.31% ammonium acetate adjusted to pH 2.2 ± 0.2 with orthophosphoric acid: acetonitrile (81:19; v/v), the mobile phase pumped at flow rate of 1.5 ml min^?1. A μ bondapack C₁₈ column (10 μm, 100 Å), 250 mm length × 4.6 mm diameter was utilized as stationary phase. Detection was affected spectrophotometrically at 294 nm. Linearity ranges for enrofloxacin, lomefloxacin and ofloxacin were 4.0–108, 7.0–112 and 8.0–113 μg ml^?1, respectively using method A and 8.0–112, 7.0–112 and 5.0–105 μg ml^?1, respectively applying method B. Minimum detection limits obtained were 0.013, 0.023 and 0.035 μg ml^?1 for enrofloxacin, lomefloxacin and ofloxacin, respectively using method A, and 0.028, 0.023 and 0.011 μg ml^?1 using method B. The proposed methods were further applied to the analysis of enrofloxacin in injection and tablets containing the ofloxacin and lomefloxacin drugs, and the results were satisfied.     

Determination of some benzimidazole fungicides in tomato puree by high performance liquid chromatography with SampliQ polymer SCX solid phase extraction

High performance liquid chromatography (HPLC) coupled with solid phase extraction (SPE) was optimized for extraction and quantification of two benzimidazoles fungicides (carbendazim and benomyl) in tomato puree. Results indicate that HPLC using an Agilent ZORBAX Eclipse plus C18 column (4.5 mm × 100 mm, 3.5 μm) and SPE using Agilent SampliQ SCX (55 mg, 3 mL) is an excellent combination for extraction and analysis of these compounds. Recoveries ranged from 90.0 to 95.5 percent with RSDs below 5 percent and limit of detections of 5 μg/kg.