Predictions of Axial and Transverse Injection into Supersonic Flow

CFD calculations are performed on a swept ramp injecting fuelaxially, and on a two-hole transverse fuel injection downstream of abackward-facing step, both into a supersonic turbulent flow. Theresulting complex flowfields are predicted using a cubick–ε turbulence closure. Comparisons with experimental data show very good agreement. A discussion of the main flow features is presented. The fast computational convergence demonstrates the readiness of the method for the design cycle. This revised version was published online in July 2006 with corrections to the Cover Date.     

Numerical analysis of a 3D hydrodynamic contact

We study here the numerical analysis of a hydrodynamic contact in a particular configuration: the 3D incompressible viscous flow of a fluid dragged by a smooth plate over a rough surface. The mathematical model takes into account and discretizes the local topography of the rough profile. The simulation outcome will be the 3D velocity and pressure fields of the fluid film within the contact borders. This work is limited to the study of numerical resolution methods working solely in finite differences. The algorithms will be tested by analysing and comparing their results with analytically known flows. Copyright © 2006 John Wiley & Sons, Ltd.     

Direct Monte Carlo Simulation of Transverse Supersonic Rarefied Gas Flow around a Cylinder

Supersonic flow around a cylinder is investigated using the direct simulation Monte Carlo method over a wide rarefaction range: from the Knudsen number Kn = 0.1 to free-molecular flow. The effect of the cylinder temperature on the region of sharp nonequilibrium near the cylinder and the heat flux is studied.     

Numerical Studies on the Mixing of CH4 and Kerosene Injected into a Supersonic Flow with H2 Pilot Injection

Two-fluid model and divisional computation techniques were used. The multi-species gas fully N-S equations were solved by upwind TVD scheme. Liquid phase equations were solved by NND scheme. The phases-interaction ODE equations were solved by 2nd Runge-Kutta approach. The favorable agreement is obtained between computational results and PLIF experimental results of iodized air injected into a supersonic flow. Then, the numerical studies were carried out on the mixing of CH ₄ and kerosene injected into a supersonic flow with H ₂ pilot injection. The results indicate that the penetration of kerosene approaches maximum when it is injected from the second injector. But the kerosene is less diffused compared with the gas fuels. The free droplet region appears in the flow field. The mixing mechanism of CH ₄ with H ₂ pilot injection is different from that of kerosene. In the staged duct, H ₂ can be entrained into both recirculation zones produced by the step and injectors. But CH ₄ can only be carried into the recirculation between the injectors. Therefore, initiations of H ₂ and CH ₄ can occur in those regions. The staged duct is better in enhancing mixing and initiation with H ₂ pilot flame.     

超声速气流中雾化燃料喷射的三维数值研究

首次用双流体模型对雾化燃料在扩张形超燃室中沿九喷嘴顺流喷射的混合问题进行了数值研究。气相用迎风 TVD格式求解三维全 Navier- Stokes方程 ,液相用预估、校正 NND格式求解三维 Euler方程。相间相互作用的常微分方程用预估、校正Runge- Kutta法求解。用三维 Poisson方程生成网格。结果表明 :气相较液相的扩散效果好 ,小直径液滴的扩散效果好。相间速度滑移、改变气相喷射压力和喷射速度对液相扩散的贡献不大 ,但调整喷射角度会明显地增强液相的扩散、混合 ,本文结果未出现阻塞。     

Numerical method for unsteady viscous hydrodynamical problem with free boundaries

A finite element method for the transient incompressible Navier–Stokes equations with the ability to handle multiple free boundaries is presented. Problems of liquid–liquid type are treated by solving two coupled Navier–Stokes problems for two separate phases. The possibility to solve problems of liquid–gas, liquid–liquid–gas or liquid–liquid–liquid type is demonstrated too. Surface tension effects are included at deformable interfaces. The method is of Lagrangian type with mesh redefinition. A predictor-corrector scheme is used to compute the position of the deformable interface with automatic control of its accuracy and smoothness. The method is provided with an automatic choice of the time integration step and an optional spline filtration of the truncation error at the free surface. In order to show the accuracy of the method, tests and comparisons are presented. Numerical examples include motion of bubbles and multiple drops.     

Three-Dimensional Interaction of a Blunt Cone with a Hot Region in a Supersonic Flow in the Presence of Surface Injection

The problem of the interaction of a blunt cone placed at zero incidence in a supersonic flow with a spherical hot region in the incident flow is considered for the case in which the hot region center is displaced relative to the axis of symmetry of the body. Two cases are studied: (1) the interaction of temperature inhomogeneity with an impermeable conical surface and (2) interaction in the presence of intense surface injection localized on the spherical bluntness of the body. It is shown that strong surface injection considerably improves the flow pattern and the aerodynamic characteristics of the body.     

Numerical simulation of flapping‐wing insect hovering flight at unsteady flow

A computational fluid dynamics (CFD) analysis was conducted to study the unsteady aerodynamics of a virtual flying bumblebee during hovering flight. The integrated geometry of bumblebee was established to define the shape of a three‐dimensional virtual bumblebee model with beating its wings, accurately mimicking the three‐dimensional movements of wings during hovering flight. The kinematics data of wings documented from the measurement to the bumblebee in normal hovering flight aided by the high‐speed video. The Navier–Stokes equations are solved numerically. The solution provides the flow and pressure fields, from which the aerodynamic forces and vorticity wake structure are obtained. Insights into the unsteady aerodynamic force generation process are gained from the force and flow‐structure information. The CFD analysis has established an overall understanding of the viscous and unsteady flow around the virtual flying bumblebee and of the time course of instantaneous force production, which reveals that hovering flight is dominated by the unsteady aerodynamics of both the instantaneous dynamics and also the past history of the wing. A coherent leading‐edge vortex with axial flow and the attached wingtip vortex and trailing edge vortex were detected. The leading edge vortex, wing tip vortex and trailing edge vortex, which caused by the pressure difference between the upper and the lower surface of wings. The axial flow, which include the spanwise flow and chordwise flow, is derived from the spanwise pressure gradient and chordwise pressure gradient, will stabilize the vortex and gives it a characteristic spiral conical shape. Copyright © 2006 John Wiley & Sons, Ltd.     

On numerical errors and turbulence modeling in tip vortex flow prediction

The accuracy of tip vortex flow prediction in the near‐field region is investigated numerically by attempting to quantify the shortcomings of the turbulence models and the flow solver. In particular, some turbulence models can produce a ‘numerical diffusion’ that artificially smears the vortex core. Low‐order finite differencing techniques of the convective and pressure terms of the Navier–Stokes equations and inadequate grid density and distribution can also produce the same adverse effect. The flow over a wing and the near‐wake with the wind tunnel walls included was simulated using 2.5 million grid points. Two subset problems, one using a steady, three‐dimensional analytical vortex, and the other, a vortex obtained from experiment and propagated downstream, were also devised in order to make the study of vortex preservation more tractable. The method of artificial compressibility is used to solve the steady, three‐dimensional, incompressible Navier–Stokes equations. Two one‐equation turbulence models (Baldwin–Barth and Spalart–Allmaras turbulence models), have been used with the production term modified to account for the stabilizing effect of the nearly solid body rotation in the vortex core. Finally, a comparison between the computed results and experiment is presented. Published in 1999 by John Wiley & Sons, Ltd.     

Numerical calculations of supersonic underexpanded jets in a cocurrent flow with the use of parabolized Navier-Stokes equations

Results of a numerical study of three-dimensional supersonic jets propagating in a cocurrent flow are described. Averaged parabolized Navier-Stokes equations are solved numerically on the basis of a developed scheme, which allows calculations in supersonic and subsonic flow regions to be performed in a single manner. A jet flow with a cocurrent flow Mach number 0.05 ⩽ M_∞ ⩽ 7.00 is studied, and its effect on the structure of the mixing layer is demonstrated. The calculated results are compared with available experimental and numerical data. __________ Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 49, No. 3, pp. 54–63, May–June, 2008.     

Multigrid solution of the Navier–Stokes equations on highly stretched grids

Relaxation-based multigrid solvers for the steady incompressible Navier–Stokes equations are examined to determine their computational speed and robustness. Four relaxation methods were used as smoothers in a common tailored multigrid procedure. The resulting solvers were applied to three two-dimensional flow problems, over a range of Reynolds numbers, on both uniform and highly stretched grids. In all cases the L₂ norm of the velocity changes is reduced to 10^?6 in a few 10's of fine-grid sweeps. The results of the study are used to draw conciusions on the strengths and weaknesses of the individual relaxation methods as well as those of the overall multigrid procedure when used as a solver on highly stretched grids.     

Effect of Gas Injection from the Surface of a Body on Its Interaction with a Temperature Inhomogeneity in a Supersonic Flow

The flow pattern in the shock layer and the aerodynamic characteristics of a hemisphere in unsteady axisymmetric interaction with a closed spherical hot-gas region embedded in the oncoming supersonic flow in the presence of intense injection of gas from the body surface into the shock layer are studied on the basis of the inviscid perfect gas model. Two cases are considered, namely, (1) when the radius of the permeable surface is greater than that of the temperature inhomogeneity and (2) when the injection is localized in the vicinity of the forward stagnation point and the permeable region is smaller the inhomogeneity.     

Simulation of flow around a thin,flexible obstruction by means of a deforming grid overlapping a fixed grid

This paper presents a numerical method for simulation of coupled flows, in which the fluid interacts with a thin deformable solid, such as flows in cardiovascular valves. The proposed method employs an arbitrary Lagrangian–Eulerian (ALE) method for flow near the solid, embodied in the outflow domain in which the mesh is fixed. The method was tested by modelling a two‐dimensional channel flow with a neo‐Hookean obstacle, an idealization of the coupled flow near a cardiovascular valve. The effects of the Reynolds number and the dimensionless elastic modulus of the material on the wall shear stress, the size of the downstream reverse flows, and the velocity and pressure profiles were investigated. The deformation of the obstacle, the pressure drop across the obstacle, and the size of the top reverse flow increased as the Reynolds number increased. Conversely, increasing the elastic modulus of the obstacle decreased the deformation of the obstacle and the size of the top reverse flows, but did not affect the pressure drop across the obstacle over the range studied. Copyright © 2007 John Wiley & Sons, Ltd.     

Effect of vertical grid variability on a free surface flow model

A previously developed numerical model that solves the incompressible, non‐hydrostatic, Navier–Stokes equations for free surface flow is analysed on a non‐uniform vertical grid. The equations are vertically transformed to the σ‐coordinate system and solved in a fractional step manner in which the pressure is computed implicitly by correcting the hydrostatic flow field to be divergence free. Numerical consistency, accuracy and efficiency are assessed with analytical methods and numerical experiments for a varying vertical grid discretization. Specific discretizations are proposed that attain greater accuracy and minimize computational effort when compared to a uniform vertical discretization. Published in 2007 by John Wiley & Sons, Ltd.     

Upwind discretization of the steady Navier–Stokes equations

A discretization method is presented for the full, steady, compressible Navier–Stokes equations. The method makes use of quadrilateral finite volumes and consists of an upwind discretization of the convective part and a central discretization of the diffusive part. In the present paper the emphasis lies on the discretization of the convective part. The solution method applied solves the steady equations directly by means of a non-linear relaxation method accelerated by multigrid. The solution method requires the discretization to be continuously differentiable. For two upwind schemes which satisfy this requirement (Osher's and van Leer's scheme), results of a quantitative error analysis are presented. Osher's scheme appears to be increasingly more accurate than van Leer's scheme with increasing Reynolds number. A suitable higher-order accurate discretization of the convection terms is derived. On the basis of this higher-order scheme, to preserve monotonicity, a new limiter is constructed. Numerical results are presented for a subsonic flat plate flow and a supersonic flat plate flow with oblique shock wave–boundary layer interaction. The results obtained agree with the predictions made. Useful properties of the discretization method are that it allows an easy check of false diffusion and that it needs no tuning of parameters.     

Simulation of the Navier–Stokes equations in three dimensions with a spectral collocation method

This paper describes a nonlinear, three‐dimensional spectral collocation method for the simulation of the incompressible Navier–Stokes equations under the Boussinesq approximation, motivated by geophysical and environmental flows. These flows are driven by the interaction of stratified fluid with topography, which this model accurately accounts for by using a mapped coordinate system. The spectral collocation method is implemented with both a Fourier trigonometric expansion and the Chebyshev polynomials, as appropriate for the domain boundary conditions. The coordinate mapping prohibits the use of existing, fast solution methods that rely on the separation of variables, so a preconditioner based on the approximate solution of a corresponding finite‐difference problem with geometric multigrid is used. The model is parallelized with the Message Passing Interface library, and it runs effectively on shared and distributed‐memory systems. Copyright © 2013 John Wiley & Sons, Ltd.     

On the implicit time integration of semi‐discrete viscous fluxes on unstructured dynamic meshes

Numerical simulations of viscous flow problems with complex moving and/or deforming boundaries commonly require the solution of the corresponding fluid equations of motion on unstructured dynamic meshes. In this paper, a systematic investigation of the importance of the choice of the mesh configuration for evaluating the viscous fluxes is performed when the semi‐discrete Navier–Stokes equations are time‐integrated using the popular second‐order implicit backward difference algorithm. The findings are illustrated with the simulation of a laminar viscous flow problem around an oscillating airfoil. Copyright © 1999 John Wiley & Sons, Ltd.     

Time‐dependent flow across a step: the slip with friction boundary condition

The paper studies numerically the slip with friction boundary condition in the time‐dependent incompressible Navier–Stokes equations. Numerical tests on two‐ and three‐dimensional channel flows across a step using this boundary condition on the bottom wall are performed. The influence of the friction parameter on the flow field is studied and the results are explained according to the physics of the flow. Due to the stretching and tilting of vortices, the three‐dimensional results differ in many respects from the two‐dimensional ones. Copyright © 2005 John Wiley & Sons, Ltd.     

Numerical simulation of viscous flow interaction with an elastic membrane

A numerical fluid–structure interaction model is developed for the analysis of viscous flow over elastic membrane structures. The Navier–Stokes equations are discretized on a moving body‐fitted unstructured triangular grid using the finite volume method, taking into account grid non‐orthogonality, and implementing the SIMPLE algorithm for pressure solution, power law implicit differencing and Rhie–Chow explicit mass flux interpolations. The membrane is discretized as a set of links that coincide with a subset of the fluid mesh edges. A new model is introduced to distribute local and global elastic effects to aid stability of the structure model and damping effects are also included. A pseudo‐structural approach using a balance of mesh edge spring tensions and cell internal pressures controls the motion of fluid mesh nodes based on the displacements of the membrane. Following initial validation, the model is applied to the case of a two‐dimensional membrane pinned at both ends at an angle of attack of 4° to the oncoming flow, at a Reynolds number based on the chord length of 4 × 10³. A series of tests on membranes of different elastic stiffness investigates their unsteady movements over time. The membranes of higher elastic stiffness adopt a stable equilibrium shape, while the membrane of lowest elastic stiffness demonstrates unstable interactions between its inflated shape and the resulting unsteady wake. These unstable effects are shown to be significantly magnified by the flexible nature of the membrane compared with a rigid surface of the same average shape. Copyright © 2007 John Wiley & Sons, Ltd.     

A distributed Lagrange multiplier/fictitious domain method for flows around moving rigid bodies: Application to particulate flow

This article discusses the application of a Lagrange multiplier‐based fictitious domain method to the numerical simulation of incompressible viscous flow modeled by the Navier–Stokes equations around moving rigid bodies; the rigid body motions are due to hydrodynamical forces and gravity. The solution method combines finite element approximations, time discretization by operator splitting and conjugate gradient algorithms for the solution of the linearly constrained quadratic minimization problems coming from the splitting method. The study concludes with the presentation of numerical results concerning four test problems, namely the simulation of an incompressible viscous flow around a NACA0012 airfoil with a fixed center but free to rotate, then the sedimentation of 200 and 1008 cylinders in a two‐dimensional channel, and finally the sedimentation of two spherical balls in a rectangular cylinder. Copyright © 1999 John Wiley & Sons, Ltd.