A new specific mechanism for thioacid/azide amidation: electronic and solvent effects

Detailed theoretical studies of azide/thioacid amidation are performed using density functional theory. The calculated results indicate that electronic properties of azide have significant effects on reaction pathways, which result in two distinct mechanisms for electron-rich and electron-poor azide coupling in the base-promoted amidation. For electron-rich azide amidation, after the concerted [3+2] cycloaddition of azide/thiocarboxylate, a new reaction channel is found challenging that recently mentioned, which follows two consecutive, unimolecular reactions with very low activation barriers (< 1.6 kcal mol⁻¹) to give an anionic amide and a nitrous sulfide (N₂S). Distinct from electron-rich azide amidation, electron-poor azide first couples with thiocarboxylate to form a linear stable adduct, and then passes through the transition state of the rate-controlling step to afford the anionic amide, rather than the thiatrazoline. The free energy barrier of this step is 4.2 kcal mol⁻¹ lower than that previously proposed. Comparatively, the azide/thioacid amidations undergo the concerted [3+2] cycloaddition and the subsequent retro-[3+2] cycloaddition process to give cis-enol form of the amide, which have higher activation barriers than those in the based-promoted amidation. Solvent effects investigated indicate that non-polar solvents, such as chloroform, are more preferable for the base-promoted thioacid/azide amidation.      

The reaction of thio acids with azides: a new mechanism and new synthetic applications

A new amide synthesis strategy based on a fundamental mechanistic revision of the reaction of thio acids and organic azides is presented. The data demonstrate that amines are not formed as intermediates in this reaction. Alternative mechanisms proceeding through a thiatriazoline intermediate are suggested. The reaction has been applied to the preparation of simple and architecturally complex amides that are difficult to access using conventional methods. The reaction is chemoselective, effective for unprotected substrates, and compatible with aprotic and protic solvents, including water.     

Ruthenium-catalyzed azide-alkyne cycloaddition: scope and mechanism

The catalytic activity of a series of ruthenium(II) complexes in azide-alkyne cycloadditions has been evaluated. The [Cp*RuCl] complexes, such as Cp*RuCl(PPh 3) 2, Cp*RuCl(COD), and Cp*RuCl(NBD), were among the most effective catalysts. In the presence of catalytic Cp*RuCl(PPh 3) 2 or Cp*RuCl(COD), primary and secondary azides react with a broad range of terminal alkynes containing a range of functionalities selectively producing 1,5-disubstituted 1,2,3-triazoles; tertiary azides were significantly less reactive. Both complexes also promote the cycloaddition reactions of organic azides with internal alkynes, providing access to fully-substituted 1,2,3-triazoles. The ruthenium-catalyzed azide-alkyne cycloaddition (RuAAC) appears to proceed via oxidative coupling of the azide and alkyne reactants to give a six-membered ruthenacycle intermediate, in which the first new carbon-nitrogen bond is formed between the more electronegative carbon of the alkyne and the terminal, electrophilic nitrogen of the azide. This step is followed by reductive elimination, which forms the triazole product. DFT calculations support this mechanistic proposal and indicate that the reductive elimination step is rate-determining.     

Nucleophilic phosphine-catalyzed [3+2] cycloaddition of allenes with N-(thio)phosphoryl imines and acidic methanolysis of adducts N-(thio)phosphoryl 3-pyrrolines: a facile synthesis of free amine 3-pyrrolines

In this report, the dipolarophile imines with easily removable activating group O,O-diethyl(thio)phosphoryl have been investigated in the nucleophilic phosphine-catalyzed [3+2] cycloaddition reaction of electron-deficient allenes. Under the catalysis of a tertiary phosphine, N-(thio)phosphorylimines readily undergo the [3+2] cycloaddition reaction with ethyl 2,3-butadienoate or ethyl 2,3-pentadienoate, affording the corresponding N-(thio)phosphoryl 3-pyrrolines in moderate to high yields with good diastereoselectivity. Removal of the (thio)phosphoryl group from the adducts has been successfully achieved via the acidic methanolysis of the P-N bond, giving the free amine 3-pyrrolines in fair to good yields without severe aromatization. Thus, a facile synthesis of N-unsubstituted 3-pyrrolines is established from the phosphine-catalyzed [3+2] cycloaddition reaction of allenes with imines.     

Intermolecular [3 + 3]-cycloadditions of azides with the Nazarov intermediate

Tetrasubstituted 1,4-dien-3-ones undergo Nazarov cyclization at low temperature, followed by reaction with organic azides via an apparent [3 + 3]-cycloaddition to give bridged bicyclic triazenes. These products do not appear to be intermediates in the previously described Schmidt-type process to furnish dihydropyridones. The reaction typically occurs with high diastereoselectivity.     

Scope of Ru(II)-catalyzed synthesis of pyridines from alkynes and nitriles

Pyridines can be efficiently synthesized by Ru(II)-catalyzed [2 + 2 + 2] cycloaddition of 1,6-diynes to alpha,omega-dinitriles or electron-deficient nitriles or by Ru(II)-catalyzed [2 + 2 + 2] cocyclization of electron-deficient alkynes and electron-deficient nitriles. The reactions with dinitriles seem likely to proceed via ruthenacyclopentadiene intermediates and the reactions with electron-poor nitriles via azaruthenacyclopentadienes. The reaction with asymmetric electron-deficient alkynes affords 2,3,6-trisubstituted pyridines in good yield.     

Mechanistic studies on the Cu-catalyzed three-component reactions of sulfonyl azides, 1-alkynes and amines, alcohols, or water: dichotomy via a common pathway

Combined analyses of experimental and computational studies on the Cu-catalyzed three-component reactions of sulfonyl azides, terminal alkynes and amines, alcohols, or water are described. A range of experimental data including product distribution ratio and trapping of key intermediates support the validity of a common pathway in the reaction of 1-alkynes and two distinct types of azides substituted with sulfonyl and aryl(alkyl) groups. The proposal that bimolecular cycloaddition reactions take place initially between triple bonds and sulfonyl azides to give N-sulfonyl triazolyl copper intermediates was verified by a trapping experiment. The main reason for the different outcome from reactions between sulfonyl and aryl(alkyl) azides is attributed to the lability of the N-sulfonyl triazolyl copper intermediates. These species are readily rearranged to another key intermediate, ketenimine, into which various nucleophiles such as amines, alcohols, or water add to afford the three-component coupled products: amidines, imidates, or amides, respectively. In addition, the proposed mechanistic framework is in good agreement with the obtained kinetics and competition studies. A computational study (B3LYP/LACV3P*+) was also performed confirming the proposed mechanistic pathway that the triazolyl copper intermediate plays as a branching point to dictate the product distribution.     

Fe-catalyzed allylic C-C-bond activation: vinylcyclopropanes as versatile a1,a3,d5-synthons in traceless allylic substitutions and [3 + 2]-cycloadditions

The low-valent iron complex Bu(4)N[Fe(CO)(3)(NO)] (TBAFe) catalyzes the allylic C-C-bond activation of electron-poor vinyl cyclopropanes to generate synthetically useful a1,a3,d5-synthons which are prone to undergo multiple consecutive reactions. The versatility of this approach is demonstrated by a traceless allylic substitution and a formal [3 + 2] cycloaddition to give either functionalized acyclic products or densely substituted cyclopentanes and pyrrolidines in high yields and regioselectivities.     

Palladium-catalyzed [3 + 2] intramolecular cycloaddition of alk-5-enylidenecyclopropanes

Readily accessible alk-5-enylidenecyclopropanes undergo [3 + 2] intramolecular cycloaddition reactions upon treatment with appropriate palladium complexes. The method allows the rapid and efficient assembly of a variety of bicyclo[3.3.0]octane systems with up to three stereocenters. Preliminary theoretical calculations uncovered previously unsuspected mechanistic possibilities based on either a concerted pallada-ene-like rearrangement or a stepwise process involving zwitterionic intermediates.     

Synthesis and computational analysis of densely functionalized triazoles using o-nitrophenylalkynes

Dipolar cylcoadditions with azides using a series of o-nitrophenylethynes and disubstituted alkynes were studied experimentally and computationally. Density functional theory computations reveal the steric and electronic parameters that control the regioselectivity of these cycloadditions. Several new substrates were predicted that would either give enhanced regiocontrol or invert the regiochemical preference. Experimentally, the alkynes were screened in the [3 + 2] cycloaddition with benzyl azide. Of the 11 alkynes screened experimentally, the acetylenes containing halogen substitution directly on the alkyne provided the highest levels of regioselectivity. These haloalkynes were also shown to tolerate variation of the azide moiety with continued good levels of regioselectivity in most cases. Diverse functional groups can be incorporated through the cycloaddition process and their subsequent orthogonal modification was demonstrated.     

A three-component, one-pot synthesis of indolizidines and related heterocycles via the [3+2] cycloaddition of nonstabilized azomethine ylides

Nonstabilized azomethine ylides (i.e. those bearing only hydrogens or alkyl groups) can be generated from (2-azaallyl)stannanes and (2-azaallyl)silanes through an intramolecular N-alkylation/demetalation cascade. The resulting ylides undergo [3+2] cycloaddition with electron-poor or electron-rich dipolarophiles yielding indolizidines and related 1-aza[m.3.0]bicycloalkane systems in good yield. An in situ protocol allows for a one-pot, three-component synthesis of indolizidines. The (2-azaallyl)stannanes tolerate enolizable hydrogens in these cycloadditions, while (2-azaallyl)silanes do not. The mechanism of the cycloaddition cascade is clarified by a series of control experiments. The same (2-azaallyl)stannanes may be transmetalated by n-butyllithium to generate 2-azaallyllithiums, which also may undergo a [3+2] cycloaddition/N-alkylation cascade to form indolizidines.     

Post-assembly Functionalization of Organoplatinum(II) Metallacycles via Copper-free Click Chemistry

We describe the use of a strain-promoted copper-free click reaction in the post-self-assembly functionalization of organoplatinum(II) metallacycles. The coordination-driven self-assembly of a 120° cyclooctyne-tethered dipyridyl donor with 60° and 120° di-Pt(II) acceptors forms molecular rhomboids and hexagons bearing cyclooctynes. These species undergo post-self-assembly [3+2] Huisgen cycloaddition with a variety of azides to give functionalized ensembles under mild conditions.     

AgNO3 catalyzed synthesis of 5-substituted-1H-tetrazole via [3+2] cycloaddition of nitriles and sodium azide

An efficient one-pot, convenient catalysis for the synthesis of 5-substituted-1H-tetrazoles is reported. The [3+2] cycloaddition involves various nitriles, sodium azide in refluxing DMF and AgNO₃ as catalyst to give corresponding 5-substituted-1H-tetrazoles in good to excellent yields. It is expected that the reaction proceeds via in situ formation of a silver azide species, which participates in coordination of nitrile moiety followed by cycloaddition of azide ion to give tetrazole.     

Reaction of carboryne with styrene and its derivatives

Reaction of carboryne generated from 1-I-2-Li-1,2-C₂B₁₀H₁₀ with styrene and its derivatives has been studied. In addition to [2+2] cycloaddition reaction and/or ene reaction, an extra-annular [4+2] cycloaddition reaction is also observed, depending upon the substituents on the vinyl unit. The resulting [4+2] cycloaddition intermediates are so reactive that they immediately undergo rearomatization via either a formal 1,3-hydrogen rearrangement or dehydrogenation initiated by hydrogen abstraction with carboryne in biradical form, to give 3,4-dihydronaphtho[1,2]-o-carboranes and naphtho[1,2]-o-carboranes, respectively. In sharp contrast to that of benzyne, further additions of carboryne onto the primary cycloadducts are not observed.     

Unexpected Direct Synthesis of N-Vinyl Amides through Vinyl Azide–Enolate [3+2] Cycloaddition

The unexpected synthesis of industrially important N-vinyl amides directly from aldehydes and α,β-unsaturated N-vinyl amides from esters is reported. This reaction probably proceeds through an initial [3+2] azide–enolate cycloaddition involving a vinyl azide generated in situ. A survey of the reaction scope and preliminary mechanistic findings supported by quantum computational analysis are reported, with implications for the future development of atom-efficient amide synthesis. Intriguingly, this study suggests that (cautious) reevaluation of azidoethene as a synthetic reagent may be warranted.     

Unexpected Direct Synthesis of N‐Vinyl Amides through Vinyl Azide–Enolate [3+2] Cycloaddition

The unexpected synthesis of industrially important N ‐vinyl amides directly from aldehydes and α,β‐unsaturated N ‐vinyl amides from esters is reported. This reaction probably proceeds through an initial [3+2] azide–enolate cycloaddition involving a vinyl azide generated in situ. A survey of the reaction scope and preliminary mechanistic findings supported by quantum computational analysis are reported, with implications for the future development of atom‐efficient amide synthesis. Intriguingly, this study suggests that (cautious) reevaluation of azidoethene as a synthetic reagent may be warranted.     

Catalytic Asymmetric Intramolecular [4+2] Cycloaddition of In Situ Generated ortho‐Quinone Methides

Herein, we describe the first catalytic asymmetric intramolecular [4+2] cycloaddition of in situ generated ortho‐quinone methides. In the presence of a confined chiral imidodiphosphoric acid catalyst, various salicylaldehydes react with dienyl alcohols to give transient ortho ‐quinone methide intermediates, which undergo an intramolecular [4+2] cycloaddition to provide highly functionalized furanochromanes and pyranochromanes in excellent diastereoselectivity and enantioselectivity.     

A fast route for the synthesis of tetrazolyl oximes by a novel multicomponent reaction between Z-chlorooximes,isocyanides and trimethylsilyl azide

A library of twenty variously decorated 1,5-disubstituted-(1H-tetrazol-5-yl)methanone oximes was prepared in one single synthetic step exploiting the combination of (Z)-chlorooximes, isocyanides and trimethylsilyl azide. The formal [3+1] cycloaddition between isocyanides and nitrile N-oxides with respect to the [3+1] cycloaddition between isocyanides and azides prevails, while the direct attack of azide onto nitrile N-oxides remains competitive. Finally, an intramolecular cyclization of a (1H-tetrazol-5-yl)methanone oxime to a benzoisoxazole tetrazole is reported for the first time.     

Photocycloaddition of four-carbon-tethered pyridones. Intramolecular hydrogen bonding and facilitated amide hydrolysis by a proximal secondary alcohol

Four-carbon-tethered pyridones undergo photocycloaddition to give exclusively trans-[4 + 4] products. The presence of a tether alcohol engenders a solvent-dependent diastereoselectivity for the cycloaddition by intramolecular hydrogen bonding to the adjacent pyridone. Following cycloaddition, the alcohol can deliver a carbonyl group to the proximal, hindered amide nitrogen, leading to a very facile amide hydrolysis.     

Copper-catalyzed synthesis of 5-substituted 1H-tetrazoles via the [3+2] cycloaddition of nitriles and trimethylsilyl azide

The [3+2] cycloaddition between various nitriles and trimethylsilyl azide proceeds smoothly in the presence of a Cu^I catalyst in DMF/MeOH, to give the corresponding 5-substituted 1H-tetrazoles in good to high yields. The reaction most probably proceeds through the in situ formation of a copper azide species, followed by a successive [3+2] cycloaddition with the nitriles.