Solvation effect of guest, supramolecular host, and host-guest compounds on the thermodynamic selectivity of calix(4)arene derivatives and soft metal cations

This paper reports thermodynamic data for the transfer of calixarene derivatives and their metal-ion complexes in dipolar aprotic solvents. These data are used to assess the effect of solvation of these compounds on the selective complexation shown by these macrocycles for soft metal cations in different media. Thus, solubilities and derived Gibbs energies of solution of 5,11,17,23-tetra-tert-butyl[25,27-bis(hydroxyl)-26,28-bis(ethylthioethoxy)]calix(4)arene, 1, and 5,11,17,23-tetra-tert-butyl-[25,27-bis(ethylenethanoate)-26,28-bis(ethylthioethoxy)]-calix(4)arene, 2, in various solvents at 298.15 K are reported. Solvation of these ligands in one medium relative to another is analyzed from their standard transfer Gibbs energies using acetonitrile as the reference solvent. These data are combined with transfer enthalpies (derived from standard solution enthalpies obtained calorimetrically) to calculate the corresponding entropies of transfer of these calix(4)arene derivatives from acetonitrile to methanol and N,N-dimethylformamide. As far as the metal-ion salts (silver and mercury) in their free and complex forms are concerned, standard solution enthalpies were determined in acetonitrile, methanol, and N,N-dimethylformamide. These data are used to derive their transfer enthalpies from one medium to another. It is concluded that the extent of complexation of these macrocycles with soft metal cations is controlled by not only the solvation changes that the free cation undergoes in moving from one medium to another but also those for the ligand and its complex cation in these solvents.     

Electrocatalytic Determination of Vitamin C Using Calixarene Modified Carbon Paste Electrodes

Effect of in situ complexation of some ions with variable valencies, like Co(II), Ni(II), Mn(II), Cu(II) and Pb(II) on the the electrooxidation of Vitamin C (L ‐ascorbic acid) was studied by cyclic voltammetry using carbon paste electrodes modified with p‐tert‐butylcalix[4]arene and p‐tert‐butylcalix[6]arene in perchloric acid, acetic acid and ammonium acetate media. Pb(II) was found to bind strongly with p‐tert‐butylcalix[4]arene in acetate medium, resulting in its being retained at the electrode surface and catalyzing the oxidation of ascorbic acid. The overpotential was reduced by about 200 mV with an increase in the peak currents. Linearity was observed over the range of 0.07–400 ppm with a detection limit of 30 ppb by differential pulse voltammetry. Interferences of some common substances like sugars and amino acids were studied and the modified electrode was used for the determination of vitamin C in commercial samples.     

Self-assembly of meso-tetrakis(4-N-ethylpyridiniurmyl) porphyrin and tetracarboxyl-phenyl calix[4]arene

Novel dimeric capsules are generated from the noncovalent assembly of 5, 10, 15, 20-tetrakis(4-N-ethylpyridiniurmyl)prophyrin (TEPyP) and tetracarboxyl-phenyl calix[4]arene. The self-assembly system was investigated based on UV-Vis absorption and fluorescent spectra. The factors affecting the interaction process including pH and concentration were examined in detail. The association constants between TEPyP and calix[4]arene were determined by the nonlinear least squares fit. The results showed that the basic medium is favourable to the interaction and electrostatic interaction was determinate in the processes of self-assembly process. The related mechanism was discussed.     

Molecular orbital theoretical prediction of the isomeric products formed from reactions of arene oxides and related metabolites of polycyclic aromatic hydrocarbons

MO theoretical calculations based on the perturbational method of Dewar provide good correlation between predicted and observed structures of products formed during: (1) isomerization of arene oxides to phenols; (2) hydration and nucleophilic addition to arene oxides; and (3) dehydration of arene dihydrodiols. The method is equally applicable to the arene oxides, dihydrodiols, etc. derived from carcinogenic and noncarcinogenic polycyclic hydrocarbons. Extension to the related enzymatic reactions occurring during metabolism of carcinogenic hydrocarbons and to the reactions of the biologically active arene diolepoxides and aryloxirenes suggests the potential utility of this approach in predicting (a) metabolite structure and (b) the structural requirements for carcinogenic and mutagenic activity.     

Supramolecular interactions of [60]- and [70]fullerenes with calix[n]arenes

[60]- and [70]fullerenes have been shown to form 1:1 supramolecular complexes with (i) 24,26-dimethoxy-25,27-dihydroxy-5,11,17,23-tetra(4-tert-butyl)calix[4]arene (1) and (ii) 37,39,41-trimethoxy-38,40,42-trihydroxy-5,11,17,23,29,35-hexa(4-tert-butyl)calix[6]arene (2) in CCl(4) medium by absorption spectroscopy. Charge transfer absorption bands of the complexes have been located in each of the cases (except [70]fullerene-2 complex) studied from which the vertical ionisation potential of 1 has been obtained. Formation constants of the complexes have been determined at four different temperatures from which the enthalpies and entropies of formation of the complexes have been obtained. Moreover, the formation constant of [70]fullerene-2 complex is higher than that of the [60]fullerene-1 and [60]fullerene-2 complexes at all the four temperatures studied. This has been accounted in terms of greater cavity size of 2 which is a calix[6]arene compared to 1 which is a calix[4]arene and also by the fact that a high degree of preorganisation takes place in case of 2 through intramolecular H-bonding at its lower rim.     

Proline–calixarene thiourea host–guest complex catalyzed enantioselective aldol reactions: from nonpolar solvents to the presence of water

A proline–calix[4]arene thiourea host–guest complex catalyzed intermolecular aldol reaction of aromatic aldehydes with cyclohexanone has been developed. The anti-configured products were obtained in good yields and with high enantioselectivities. The reaction is proposed to work via a modified Houk–List model, where the carboxylate part of the proline constitutes as a supramolecular system with the thiourea. The outcome of the study indicates the influence of the calix[4]arene thiourea on both the reactivity and selectivity in a non-polar reaction medium, even in the presence of water at moderate temperatures.     

Energies of charge transfer and supramolecular interactions of some mono O-substituted calix[6]arenes with [60]fullerene by absorption spectrometric method

Equilibria for the formation of supramolecular complexes of [60]fullerene with a series of mono O-substituted calix[6]arenes, namely: (i) 37-methoxy-38,39,40,41,42-pentahydroxy-5,11,17,23,29,35-hexa(4-tert-butyl)calix[6]arene (1), (ii) 37-allyl-38,39,40,41,42-pentahydroxy-5,11,17,23,29,35-hexa(4-tert-butyl)calix[6]arene (2), (iii) 37-phenacyl-38,39,40,41,42-pentahydroxy-5,11,17,23,29,35-hexa(4-tert-butyl)calix[6]arene (3), (iv) 37-ethylester-38,39,40,41,42-pentahydroxy-5,11,17,23,29,35-hexa(4-tert-butyl)calix[6]arene (4) and (v) 37-benzyl-38,39,40,41,42-pentahydroxy-5,11,17,23,29,35-hexa(4-tert-butyl)calix[6]arene (5) have been studied in CCl4 medium by absorption spectroscopic technique. The stoichiometry has been found to be 1:1 ([60]fullerene:calix[6]arene) in each case. An absorption band due to charge transfer (CT) transition is observed in each case in the visible region. The vertical ionisation potentials (I(D)(v)) of all the calix[6]arenes under study have been estimated utilising CT transition energy. The experimental I(D)(v) values also yield a good estimate of the electron affinity of [60]fullerene. The degrees of CT in the ground state of the complexes have been found to be very low (about 0.15%). Resonance energy of the complexes have been estimated. Thermodynamic parameters for the supramolecular complex formation of [60]fullerene with mono O-substituted calix[6]arene receptors are reported. It is observed that among the calix[6]arenes under the present study, only 1 and 4 form inclusion complexes with [60]fullerene. This has also been substantiated by theoretical calculation using PM3 method. Thus presence of one substituent group (of different types) on the lower rim of the calix[6]arene molecule has been shown to govern the host-guest complexation process.     

Physicochemical Characterization of Hydrated 4-Sulphonato-Calix[n]arenes: Thermal,Structural, and Sorption Properties

In this study, the thermal behavior of three hydrated water-soluble 4-sulphonato calix[n]arenes was investigated. The melting points, heats of fusion, and heats of solution of the calix[4]arene, calix[6]arene and calix[8]arene were 277, 262, and 270°C; 192, 242 and 351 kJ/mol; and 30, 58 and 63 kJ/mol, respectively. Lower heat of fusion, smaller increase in entropy and smaller heat of solution of the calix[4]arene compared to the calix[6]arene and calix[8]arene showed that less heat was required to break up the crystal lattice of the smaller macromolecule. This apparent anomaly is rationalized in terms of smaller cooperativity of interaction between the molecules of calix[4]arene in the crystal lattice, although the strength of the individual interactions is stronger as evidenced by the higher melting point. TGA analysis indicated that about 17–20% of water was associated with the calix[n]arenes. Both TGA and hot stage microscopy results indicated that upon heating these molecules underwent stepwise water loss. TGA kinetics showed that the 4-sulphonato-calix[8]arene lost water easier than the other two calixarenes. The moisture adsorption behavior of all calixarenes followed type II isotherms. For the same amount of material, the calix[6]arene adsorbed more moisture than the calix[4]arene and the calix[8]arene. Moreover, dehydrated less crystalline 4-sulphonic-calix[n]arenes powders are hydroscopic.

     

单取代罗丹明-硫杂杯[4]芳烃衍生物的合成及对Fe~(3+)离子的荧光探针性质研究

以1,3-交替-二羧基甲氧基硫杂杯[4]芳烃为原料,通过与罗丹明乙二胺衍生物的酰化反应得到罗丹明基团单取代的硫杂杯[4]芳烃衍生物。目标化合物结构经IR,NMR,MS及元素分析等技术表征。荧光及可见吸收光谱法研究表明化合物对Fe3+具有探针性质,在乙醇-水(1/1,V/V)Tris-HCl(pH=6.0)缓冲溶液中,对Fe3+呈现光关-开响应,并观察到显著的荧光增强和颜色变红现象。测定了Fe3+-配合物的组成、稳定常数及荧光量子产率。     

Synthesis, characterization, and conformational analysis of new perfunctionalized calix[9]arenes

The synthesis of a series of six new per-substituted p-tert-butylcalix[9]arenes derivatives has been achieved. Functions such as ester, nitrile, or carbonate have been grafted on the phenolic oxygens of calix[9]arene: p-tert-butylcalix[9]arene nona-ethyl acetate, p-tert-butylcalix[9]arene nona-carboxylic acid, p-tert-butylcalix[9]arene nona-cyanopropyloxy, p-tert-butylcalix[9]arene nona-tert-butoxycarbonyle, p-tert-butylcalix[9]arene nona-acetyl, and p-tert-butylcalix[9]arene nona-trifluoroacetyl have been obtained in good yields (from 48% to 78%) and fully characterized. The X-ray structures of p-tert-butylcalix[9]arene nona-tert-butoxycarbonyl and p-tert-butylcalix[9]arene nona-ethyl acetate have been determined. A dynamic NMR study has revealed the high conformational mobility of such structures, even at low temperature.     

Solvent control on the selective, nonselective, and absent response of a partially substituted lower rim calix(4)arene derivative for soft metal cations (mercury(II) and silver(I)). Structural and thermodynamic studies

The solvent control on the ability of a partially substituted lower rim calix(4)arene derivative 5,11,17,23,tetra-tert-butyl[25,27-bis(hydroxy)-26,28-bis(ethylthioethoxy)]-calix(4)arene, 1 to host soft metal cations (Hg(II) and Ag(I)) is demonstrated through 1H NMR, electrochemical (conductance measurements), and thermodynamic characterization of the complexation process in a wide variety of solvents. Solvent-ligand interactions were assessed from 1H NMR measurements involving 1 and various solvents in CDCl3. Thus, the formation of a 1:1 1-CH3CN adduct is reported. As far as metal cations are concerned, depending on the medium their complexation with 1 was only observed for Hg(II) and Ag(I). Thus, in acetonitrile, 1 is more selective for Hg(II) relative to Ag(I) by a factor of 2.2 x 10(3). In methanol the selectivity is reversed to an extent that the affinity of 1 for Ag(I) is 1.4 x 10(3) higher than that for Hg(II). However, 1 is unable to recognize selectively these cations in N,N-dimethylformamide while in propylene carbonate the ability of 1 to interact with these cations is lost. An outstanding feature of thermodynamics emerges when an assessment is made of the ligand effect on the complexation of these cations and analogues calix(4)arene derivatives. Thus, in acetonitrile the thermodynamics of cation complexation by the hydrophilic cavity of a calix(4)arene containing mixed pendant groups is built up from thermodynamic data for the same process involving derivatives with common functionalities at the narrow rim. This is a unique example of the additive contribution of pendant arms in the field of thermodynamics of calixarene chemistry.     

Spectrometric Study of the Size Discrimination of Quaternary Ammonium Cations by Tetracyanoresorcin[4]arene

The inclusion complexes of tetracyanoresorcin[4]arene with six quaternary ammonium cations—biologically important acetylcholine and choline, tetramethyl ammonium, tetraethyl ammonium, tetrapropyl ammonium and tetrabutyl ammonium—were studied by means of electrospray ionization mass, fluorescence and NMR spectrometries. The results indicate that tetracyanoresorcin[4]arene shows high affinity toward these ammoniums and is capable of recognizing their sizes.

Spectrometric evidences for the size discrimination of quaternary ammonium cations by tetracyanoresorcin[4]arene are preseneted.     

p-tert-Butylcalix[8]arene catalysed synthesis of 3,5-dinitrothiophene scaffolds: antiproliferative effect of some representative compounds on selective anticancer cell lines

A new efficient protocol for the synthesis of 3,5-dinitrothiophene scaffolds was developed by using simple p-tert-butylcalix[8]arene in aqueous medium. Biological activities of some representative compounds were also studied to inhibit the cell growth on selective anticancer cell lines.     

Alternating copolymerization of carbon monoxide and vinyl arenes using [N,N] bidentate palladium catalysts

The alternating copolymers of carbon monoxide (CO) and vinyl arene monomers, namely aromatic polyketones, are a family of attractive engineering plastic. In the catalytic synthesis of this kind of polymeric materials, [N,N] bidentate palladium catalysts represent the most successful catalytic systems. In this review, we introduce the present status of polyketone synthesis, with a focus on the aromatic polyketones made from vinyl arene and CO. We also address the palladium-catalyzed CO/vinyl arene alternating copolymerization mechanism. A variety of [N,N] bidentate palladium catalysts bearing 2,2′-bipyridine, 1,10-phenanthroline, α-diimine, and pyridine-imine ligands are surveyed for CO/vinyl arene copolymerization. The effects of vinyl arene monomer, counteranion, and solvent on copolymerization are also discussed. The copolymerization stereochemistry including chain end-control and enantiomorphic site control mechanisms is introduced. This review aims to promote the design of [N,N] bidentate palladium catalysts for CO/vinyl arene copolymerization for the development of high-performance aromatic polyketones.     

A High‐Barrier Molecular Balance for Studying Face‐to‐Face Arene–Arene Interactions in the Solid State and in Solution

An atropisomeric molecular balance was developed to study face‐to‐face arene–arene interactions. The balance has a large central 1,4,5,8‐naphthalene diimide surface that forms intramolecular arene–arene interactions with two pendent arms. The balance adopts distinct syn and anti isomers with varying numbers of intramolecular interactions. Thus, the strength of the arene–arene interaction could be quantitatively measured by NMR spectroscopy from the anti/syn ratios. The size of the arene arms was easily varied, which allowed examination of the relationship between arene size and strength of the interaction. A nonlinear size dependence was observed in solution with larger arene arms having a disproportionately stronger arene–arene interaction. The intramolecular arene–arene interactions were also characterized in the solid state by X‐ray crystallography. These studies were facilitated by the kinetic stability of the syn and anti isomers at room temperature due to the high isomerization barrier (ΔG=27.0 kcal mol^?1). Thus, the anti isomer could be selectively isolated and crystallized in its folded conformation. The X‐ray structures confirmed that the anti isomers formed two strong intramolecular arene–arene interactions with face‐to‐face geometries. The solid‐state structure analysis also reveals that the rigid framework may contribute to the observed nonlinear size trend. The acetate linker is slightly too long, which selectively destabilizes the balances with smaller arene arms. The larger arene arms are able to compensate for the longer linker and form effective intramolecular arene–arene interactions.     

Metal-mediated self-assembly of pyridylcalixarenes: prevention of intramolecular metal chelation is essential in constructing molecular capsules.

To construct calixarene-based molecular capsules utilizing the pyridyl-Pd(II) interaction, reactions of cone-pyridylcalix[4]arene 3, cone-pyridylcalix[5]arene 13, and cone-pyridylcalix[4]arene bis-crown 16 with square-planar Pd(II) complex 7 were investigated. Because of the coexistence of intermolecular binding and chelate-forming intramolecular binding, the reactions of cone-pyridylcalix[4]arene 3 or cone-pyridylcalix[5]arene 13 with cis-Pd(II) complex 7 yield complicated, structure-unknown oligomers. The short dioxyethylene bridges on the lower rim of pyridylcalix[4]arene bis-crown 16 rigidify the cone conformation and thus prohibit 16 from the intramolecular binding with a metal component. Thus, two cone-tetrapyridylcalix[4]arene bis-crown 16 and four cis-Pd(II) complex molecules self-assemble into molecular capsules that exist as a parallel/antiparallel conformer mixture in a nearly 1:1 ratio. The results demonstrated that to prevent entropically favorable intramolecular binding is essential is constructing higher capsule-like structures with calixarene building blocks by self-assembling.     

碱金属掺杂叔丁基杯[4]芳烃体系的结构及非线性光学性质

采用密度泛函理论B3LYP方法得到了M@t-Bu-calix[4]arene和（M@t-Bu-calix[4]arene）Li'（M=Li,Na,K）体系的几何结构. 其中（M@t-Bu-calix[4]arene）Li'（M=Li,Na,K）三个体系各有5个稳定异构体,在前三个异构体中,碱金属与t-Bu-calix[4]arene分子间具有很强的相互作用能,说明了体系的稳定性. 在部分（M@t-Bucalix[4]arene）Li异构体中Li'原子以阴离子形式存在,整个体系表现出碱金属化物的特性. 此外,使用CAMB3LYP方法计算了t-Bu-calix[4]arene及碱金属掺杂后体系的非线性光学性质. 结果表明,t-Bu-calix[4]arene内部掺杂一个碱金属原子M后,体系的一阶超极化率（β₀）有较大提高,而在配体外部又掺杂一个Li原子后,体系具有更大的β₀值. 其中（M@t-Bu-calix[4]arene）Li'体系的MLi'-4异构体表现出最高的β₀值（41827-114354 a.u.）,并且随着M原子序数的增加而逐渐增大. 可见,碱金属掺杂是提高t-Bu-calix[4]arene非线性光学响应的一种有效策略.     

Synthesis and characterization of new polyimides containing calix[4]arenes in the polymer backbone

Two diaminocalix[4]arene monomers were synthesized from p-tert-butylcalix[4]arene through a 4-step reaction sequence. New copoly(amic acid)s containing calix[4]arene moieties on the polymer backbone were successfully synthesized in N-methyl-2-pyrrolidone by polycondensations of 4,4′-oxydiphthalic anhydride (ODPA) with the diaminocalix[4]arene monomers using 4,4′-oxydiphenylene diamine (ODA) as a comonomer. These copoly(amic acid)s were soluble in aprotic polar solvents, so that they can be processed in various ways. The copoly(amic acid) precursors were thermally converted to the corresponding copolyimides in films. The copolyimide films are amorphous, but insoluble in common solvents. They are thermally stable up to 366°C. The copolyimides exhibit relatively high TEC's, low T_g's, low refractive index, low dielectric constant, low optical anisotropy, low dielectric anisotropy, and low water uptake, compared to those of conventional ODPA-ODA polyimide. These property characteristics were interpreted in regard to bulky, cone-like calix[4]arene moieties and their effects on the chain conformation and morphological structure. The processability and property characteristics support that both of the copolyimides containing calix[4]arene moieties are potential candidate materials suitable for membranes, antioxidant additives, chemical sensor devices, and microelectronic devices. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2013–2026, 1999     

Balancing Donor-Acceptor and Dispersion Effects in Heavy Main Group Element π Interactions: Effect of Substituents on the Pnictogen⋅⋅⋅π Arene Interaction

High-level ab initio calculations using the DLPNO-CCSD(T) method in conjunction with the local energy decomposition (LED) were performed to investigate the nature of the intermolecular interaction in bismuth trichloride adducts with π arene systems. Special emphasis was put on the effect of substituents in the aromatic ring. For this purpose, benzene derivatives with one or three substituents (R=NO₂, CF₃, OCHO, OH, and NH₂) were chosen and their influence on donor-acceptor interaction as well as on the overall interaction strength was examined. Local energy decomposition was performed to gain deeper insight into the composition of the interaction. Additionally, the study was extended to the intermolecular adducts of arsenic and antimony trichloride with benzene derivatives having one substituent (R=NO₂ and NH₂) in order to rationalize trends in the periodic table. The analysis of natural charges and frontier molecular orbitals shows that donor-acceptor interactions are of π→σ* type and that their strength correlates with charge transfer and orbital energy differences. An analysis of different bonding motifs (Bi⋅⋅⋅π arene, Bi⋅⋅⋅R, and Cl⋅⋅⋅π arene) shows that if dispersion and donor-acceptor interaction coincide as the donor highest occupied molecular orbital (HOMO) of the arene is delocalized over the π system, the M⋅⋅⋅π arene motif is preferred. If the donor HOMO is localized on the substituent, R⋅⋅⋅π arene bonding motifs are preferred. The Cl⋅⋅⋅π arene bonding motif is the least favorable with the lowest overall interaction energy.     

Separation of Linear and Branched Alkanes Using Host–Guest Complexation of Cyclic and Branched Alkane Vapors by Crystal State Pillar[6]arene

Activated crystals of pillar[6]arene produced by removing the solvent upon heating were able to take up branched and cyclic alkane vapors as a consequence of their gate‐opening behavior. The uptake of branched and cyclic alkane vapors by the activated crystals of pillar[6]arene induced a crystal transformation to form one‐dimensional channel structures. However, the activated crystals of pillar[6]arene hardly took up linear alkane vapors because the cavity size of pillar[6]arene is too large to form stable complexes with linear alkanes. This shape‐selective uptake behavior of pillar[6]arene was further utilized for improving the research octane number of an alkane mixture of isooctane and n‐heptane: interestingly, the research octane number was dramatically improved from a low research octane number (17 %) to a high research octane number (>99 %) using the activated crystals of pillar[6]arene.