KINETICS OF SUSPENDED EMULSION POLYMERIZATION OF METHYL METHACRYLATE

The kinetics of suspended emulsion polymerization of methyl methacrylate (MMA), in which water acted as the dispersed phase and the mixture of MMA and cyclohexane as the continuous phase, was investigated. It showed that the initial polymerization rate (Rp0) and steady-state polymerization rate (Rp) were proportional to the mass ratio between water and oil phase, and increased as the polymerization temperature, the potassium persulphate concentration ([I]) and the Tween20 emulsifier concentration ([S]) increased. The relationships between the polymerization rate and [I] and [S] were obtained as follows: Rp0 ∝ [I]0.73[S]0.32 and Rp ∝ [I]0.71[S]0.23. The above exponents were close to those obtained from normal MMA emulsion polymerization. It also showed that the average molecular weight of the resulting poly(methyl methacrylate) decreased as the polymerization temperature, [I] and [S] increased. Thus, MMA suspended emulsion polymerization could be considered as a combination of many miniature emulsion polymerizations proceeding in water drops and obeyed the classical kinetics of MMA emulsion polymerization.     

SYNTHESIS AND POLYMERIZATION OF α-METHACRYLYOXYLETHYLOXYCARBONYLMETHYL-ω-(N,N-DIETHYLDITHIOCARBAMYL)POLYSTYRENE MACROMONOMERS

Polystyrene macromonomers with different molecular weight were prepared by radical polymerization of styrene(St) in benzene using β-methacryloxylethyl 2-N,N-diethyldithiocarbamylacetate (MAEDCA) as a monomer-iniferter.Characterization of the macromonomer by ~1H-NMR showed that the end groups were α-methacrylyoxylethyloxycarbonyl-methyl and ω-(N,N-diethyldithiocarbamyl). The macromonomer was difficult to homopolymerize, but it was easilycopolymerized with methyl methacrylate (MMA) initiated by AIBN to form graft copolymers (PMMA-g-PSt) with PStbranches randomly distributed along the PMMA backbone. Copolymerization reaction and the structure of the graftcopolymers were strongly affected by M_n and concentration of the macromonomer. The composition and M_n of the purified graft copolymer were determined by ~1H-NMR and GPC analysis.     

Preparation and characterization of star ABC triblock copolymer of ethylene oxide,styrene and methyl methacrylate

A universally significant method,which combines the anionic polymerization with photoinduced charge transfer polymerization,for preparation of soluble star ABC triblock copolymer of ethylene oxide,styrene and methyl methacrylate,was described.The poly(ethylene oxide) (PEO) block was formed by initiation of phenoxy an-ions using p-aminophenol protected by Schiff's base as the parent compound Then the charge transfer system composed of PEO chains with deprotected-amino end groups and benzophenone initiated the polymerization of styrene and methyl metnacrylate sequentially under UV irradiation.The formed star triblock copolymer of styrene,ethylene oxide and methyl methacrylate could be purified by thin-layer chromatography (TLC) and characterized by IR,1H NMR,GPC (gel permeation chromatogrphy) and PGC (pyrolysis gas chromatography).     

STUDIES ON ORGANIC PEROXIDE/N, NDI (2-α-METHYL-ACRYLOYLOXY PROPYL)-PARA-TOLUIDINE BINARY SYSTEMS

The polymerization of methyl methacrylate (MMA) initiated by organic peroxide and polymerizable aromatic tertiary amine such as N, N-di (2-α-methylacryloyloxy propyl)-p-toluidine (MP)_2PT binary system has been studied. It was found that the (MP)_2PT promotes MMA polymerization, and the kinetics of MMA polymerization fits the radical polymerization rate equation. Based on the ESR studies and the end-group analysis the initiation mechanism is proposed.     

STUDIES ON THE INITIATION MECHANISM OF ORGANIC PEROXIDE AND N-METHACRYLOYLOXYETHYL-N-METHYL ANILINE IN METHYL METHACRYLATE POLYMERIZATION

The initiation mechanism of methyl methacrylate (MMA) polymerization by organic peroxide and polymerizable aromatic tertiary amine such as N-methacryloyloxyethyl-N-methyl aniline (MEMA) binary system has been studied. The kinetics of polymerization of MMA and the ESR spectra of organic peroxide/MEMA system were determined. Based on the ESR study and the end-group analysis by UV spectra of the polymer formed, the initiation mechanism is proposed.     

POLYMERIZATION OF ETHYLENE METHYL PHOSPHATE IN THE PRESENCE OF SODIUM POLY(ETHYLENE GLYCOL)ATE*

Poly(ethylene methyl phosphate)-poly(ethylene glycol)-poly(ethylene methyl phosphate) triblockcopolymers carrying hydroxyl group at both chain ends were synthesized with sodium poly(ethyleneglycol)ate as initiator. The effects of the factors such as solvent, amount of the initiator and reaction timewere investigated. The copolymers were characterized by IR, ~1H-NMR, ~1H{~(31)P}-NMR, ~(13)C-NMR, ~(31)P{~1H}-NMR, and DSC. High molecular weight of the copolymer and high yield of the polymerization were achievedwithin 3 min at 25℃. The polymerization process was studied by ~(31)P{~1H}-NMR and transesterification wasfound during longer polymerization time.     

PREPARATION OF POLY（METHYL METHACRYLATE）/LAYERED DOUBLE HYDROXIDES NANOCOMPOSITES via in situ SOLUTION POLYMERIZATION

An exfoliated layered double hydroxides/poly(methyl methacrylate)(LDHs/PMMA)nanocomposite was prepared by in situ solution polymerization of methyl methacrylate(MMA)in the presence of 4-vinylbenzenesulfonate intercalated LDHs(MgAl-VBS LDHs).MgAl-VBS LDHs was prepared by the ion exchange method,and the structure and composition of the MgA1-VBS LDHs were determined by X-ray diffraction(XRD),infrared spectroscopy and elemental analysis.XRD and transmission electron microscopy(TEM)were employed to examine the structure of LDHs/PMMA nanocomposite.It was indicated that the LDHs layers were well exfoliated and dispersed in the PMMA matrix.The grafting of PMMA onto LDHs was confirmed by the extraction result and the weight fraction of grafted PMMA increased as the weight fraction of LDHs in the nanocomposites increased.     

STUDIES ON RADICAL POLYMERIZATION OF METHYL METHACRYLATE INITIATED WITH ORGANIC PEROXIDE-AMINE SYSTEMS

Radical polymerization of methyl mcthacrylate (MMA) initiated with various diacyl peroxideamine systems was studied. Benzoyl peroxide (BPO) and lauroyl peroxide (LPO) were used as diacyl peroxide component, N,N-dimethyl aniline (DMA) and its para substituted derivatives, i.e., N,N-dimethyl-p-toluidine (DMT), p-hydroxymethyl-N,N-dimethyl aniline (HDMA), p-nitro-N,N-dimethyl aniline (NDMA) and p-dimethylamino benzaldehyde (DMAB) were used as amine components. It was found that the peroxide-DMT systems give higher rates of bulk polymerization R_p of MMA than the organic hydroperoxide-DMT systems with the following descending order BPO-DMT>LPO-DMT>CHP (cumene hydroperoxide)-DMT>TBH (tert-butyl hydroperoxide)-DMT. The aromatic tertiary amines possess obvious structural effect on the R_p values in the diacyl peroxideamine system. The overall activation energy of MMA polymerization was determined and thekinetics of polymerization of MMA initiated with BPO-DMT system was investigated.     

A New Initiator Cholesteryl Chloroformate for Cupper-Based Atom Transfer Radical Polymerization of Methyl Methacrylate

The polymerization of metyl methacrylate (MMA) was studied in detail by use of CuCI/L as a catalyst and cholesteryl chloroformate (CC) as an initiator. It was found that the atom transfer radical polymerization of MMA could proceed when L equals to a multidentate aliphatic amine ligand, N,N,N‘,N“,N“-penta(methyl acrylate)diethylenetriamine (MA5-DETA), and no polymerization was occurred while L=2,2‘-bipyridine and 1,10phenanthroline. The linear proportionality of the molecular weights to the conversions and straight lines observed in ln[M]0/[M] versus time plots indicated that the present polymerization system had the typical controlled polymerization characteristics.     

DESIGN AND CONTROL OF SOAP-FREE HYDROPHILIC-HYDROPHOBIC CORE-SHELL LATEX PARTICLES WITH HIGH CARBOXYL CONTENT IN THE CORE OF THE PARTICLES

Soap-free hydrophilic-hydrophobic core-shell latex particles with high carboxyl content in the core of the particles were synthesized via the seeded emulsion polymerization using methyl methacrylate(MMA),butyl acrylate(BA), methacrylic acid(MAA),styrene(St)and ethylene glycol dimethacrylate(EGDMA)as monomers,and the influences of MMA content used in the core preparation on polymerization,particle size and morphology were investigated by transmission electron microscopy,dynamic light scattering and conductometric titration.The results showed that the seeded emulsion polymerization could be carried out smoothly using "starved monomer feeding process" when MAA content in the core preparation was equal to or less than 24 wt%,and the encapsulating efficiency of the hydrophilic P(MMA-BA-MAAEGDMA) core with the hydrophobic PSt shell decreased with the increase in MAA content.When an interlayer of P(MMAMAA -St)with moderate polarity was inserted between the P(MMA-BA-MAA-EGDMA)core and the PSt shell,well designed soap-free hydrophilic-hydrophobic core-shell latex particles with 24 wt%MAA content in the core preparation were obtained.     

PHOTOSENSITIVITY OF CERIC ION INITIATED METHYL ACRYLATE POLYMERIZATION

The polymerization of methyl acrylate was sensitive to UV light.Under UV light,the rate of polymerization is 8 times as high as the ratein dark.The overall activation energy was decreased by the UV light(313nm).A tentative explanation is given and the mechanism is discussed.     

SYNTHESIS OF BRANCHED POLYETHYLENE USING (α-DIIMINE)NICKEL(Ⅱ)TiCl4 COMBINED AND SUPPORTED CATALYST*

(α-Diimine)nickel(Ⅱ) {[C6H5 -N = C(CH3)-C(CH3) = N -C6H5]NiBr2}-TiCl4 abbreviated as NiL-TiCl4 combined catalyst which is supported on MgCl2-SiO2 carrier has been prepared, by using alkyl aluminum (AIR3) as the cocatalyst in place of methylaluminoxane (MAO) to catalyze ethylene oligomerization and copolymerization in situ. The influences of procedure for supporting NiL-TiCI4, the molar ratio of NiL to TiCI4, cocatalyst type and polymerization temperature on the catalytic performance were studied. The degree of branching and the composition of the branched chain of polymers produced have been investigated by IR and ^13C-NMR spectra. The results show that the combined catalyst can synthesize the branched polyethylene with various banched chains .The polymerization reaction was monitored by gas chromatography and mass spectrometry (GC-MS). The results show that this catalyst promotes the oligomerization and copolymerization in situ for ethylene.     

SYNTHESIS AND POLYMERIZATION OF ALIPHATIC TERTIARY AMINO-GROUP N-SUBSTITUTED ACRYLAMIDES

Aliphatic tertiary amino-group N-substituted acrylamides, N-acryl-N′-methylpiperazine (AMP)and N-methacryl-N′-methylpiperazine (MAMP) were synthesized directly from N-methylpiperazinewith corresponding acryloyl chlorides and characterized by elementary analysis of their picrates,~1H-NMR, IR and MS. AMP did not polymerize with benzoyl peroxide (BPO), but could poly-merize with lauroyl peroxide (LPO). The rate equation of the polymerization was given as R_P=K_P [AMP]~(1.5)[LPO]~(0.5) and the overall activation energy of this polymerization system was 10.8Kcal/mol. The redox nature of LPO with the monomer itself was suggested. Even though AMP and MAMP hardly proceed the polymerization initiated with BPO, butunder lower concentration would form redox system with BPO to initiate the polymerization of MMAreadily. The rate equation of the polymerization of MMA initiated with MAMP-BPO systemwas given as R_P=K_P [MMA] [MAMP}~(0.5) [BPO]~(0.5) and the overall activation energy was 10.2Kcal/mol. The analysis of the obtained polymers confirmed that MAMP not only initiated the poly-merization of MMA by combining with BPO, but also took part in the polymer chains impartingthem with better biocompatibility.     

Synthesis and characterization of a novel macromolecular surface modifier for polyethylene

A new macromolecular surface modifier, a copolymer of lauryl methacrylate (LMA) and poly(ethylene glycol) methyl methacrylate (PEGMA), was synthesized through free radical polymerization. The copolymer was characterized by nuclear magnetic resonance spectrum (1H-NMR) and thermogravimetric analysis (TGA). The copolymer was used to blend with polyethylene. The binary blends have been characterized by attenuated total reflection/Fourier transform infrared (ATR-FTIR), contact-angle measurements (CDA) and scanning electron microscopy (SEM). The results indicated that poly(ethylene glycol) methyl methacrylate-co-lauryl methacrylate (PEGMA-co-LMA) could diffuse preferably onto the surface of the polyethylene (PE) film, and thus can be used as an efficient surface modifier for PE.     

Iron-mediated AGET ATRP of styrene and methyl methacrylate using ascorbic acid sodium salt as reducing agent

Atom transfer radical polymerization of styrene(St) and methyl methacrylate(MMA) in bulk and in different solvents using activators generated by electron transfer(AGET ATRP) were investigated in the presence of a limited amount of air using FeCl3·6H2O as the catalyst, ascorbic acid sodium salt(AsAc-Na) as the reducing agent, and a cheap and commercially available tetrabutylammonium bromide(TBABr) as the ligand. It was found that polymerization in THF resulted in shorter induction period than that in bulk and in toluene for AGET ATRP of St, while referring to AGET ATRP of MMA, polymerization in THF showed three advantages compared with that in bulk and toluene: 1) shortening the induction period, 2) enhancing the polymerization rate and 3) having better controllability. The living features of the obtained polymers were verified by chain end analysis and chain-extension experiments.     

PHOTOPOLYMERIZATION OF MMA INITIATED BY CYANINE DYE AND HEXAARYLBIIMIDAZ0LE

The photoinitiating system composed of 1-ethyl-3'-methylthiacyanine bro-mide (C-I), 2-chlorohexaarylbiimidazole (o-Cl-HABI) and 3-mercapto-4-methyl-4H-1, 2, 4-triazole (MTA), which act as sensitizer, initiator and hydrogen-donor respectively, can beused to initiate the polymerization of methyl methacrylate (MMA). The kinetic study wascarried out in trichloromathane solution at 30℃ by using dilatometry. The relation be-tween the polymerization rate and the concentrations of C-I, o-Cl-HABI, MTA and MMAwas studied.     

Synthesis of cyclic oligo(ethylene adipate)s and their melt polymerization to poly(ethylene adipate)

We present here the first synthesis of cyclic oligo(ethylene adipate)s(COEAs) via pseudo-high dilution condensation reaction of adipoyl chloride with ethylene glycol, and the synthesis of corresponding poly(ethylene adipate)(PEA) via the melt polymerization of COEAs. The structure of COEAs was characterized and proved by 1H-NMR and MALDI-TOF mass measurements. The effects of organic base, reaction temperature and the ratio of adipoyl chloride to ethylene glycol on the yield of COEAs were studied, and the optimum reaction condition was revealed. PEA, a diacid and diol based semi-crystalline green aliphatic polyester, was synthesized by the melt polymerization of COEAs using Ti(n-C4H9O)4 as catalyst and 1,10-decanediol as initiator at 200 °C, which follows the polycondensation-coupling ringopening polymerization method. Our strategy should be applicable to the synthesis of versatile aliphatic polyesters based on diacid and diol monomers, which have potential applications as biocompatible and biodegradable materials.     

PHOTOSENSITIVITY OF Ce (Ⅳ) INITIATED METHYL ACRYLATE POLYMERIZATION

The influences of UV light irradiation (313 nm) and diffused daylight on the polymerization of methyl acrylate initiated by the ceric ammonium nitrate without any reducing agent have been studied both in aqueous nitric acid and in pure water. The rate of polymerization was found to be accelerated and the overall activation energy and the induction time were found to be decreased sharply by the UV light irradiation. Under UV light, the rate of polymerization is 8 times as high as the rate in dark. The rate of polymerization was found to attain a maximum with the increase of nitric acid concentration and the rate of polymerization became less sensitive to UV light in the presence of nitric acid whereas the induction period reduced outstandingly. Based on the experimental results, the mechanism is proposed.     

阻聚剂对MMA原子转移自由基聚合的影响

Effect of a series of inhibitors as additives on atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) with FeCl2/PPh3 as catalyst system was studied, including 2,4,6-trinitrophenol (TNP), 4-methoxyphenol (4-MP), hydroquinone (HQ) and nitrobenzene (NB). It was found that TNP was the only. efficient additive for ATRP among these inhibitors. In the presence of small amounts of TNP, the polymerization proceeded rapidly after induction period to yield the polymers with controlled molecular weights and narrow molecular weight distributions (MWD). The initiating efficiency of the modified catalyst system with TNP was increased. The mechanism was proposed and confirmed by the end group analysis of the polymer.     

STUDY ON THE KINETICS OF POLYMERIZATION OF MMA BY COPPER（Ⅱ） CHELATING RESINS

The polymerization of MMA initiated by copper(Ⅱ） chelating resins/CCl4 system was studied.From the kinetic data,the kinetic equation of polymerization can be expressed as Rp=Ke^-56400/RT[MMA]^1.57[CCl4]^m[RESIN-Cu]^0.18 where m:3-4.5,when[CCl4] 0.1-6.93M.The free radical polymerization mechanism is proposed.The primary radicals are formed by the process of complexation-chlorine transformation among the copper(Ⅱ) chelating resin,CCl4 and methacrylate.