Ab initio study on magnetoelectric and electronic properties in Pb2TiVO6

First principles calculations within the projected augmented-wave (PAW) method, using the local spin density approximation plus U (LSDA+U) scheme, show that the tetragonal Pb2TiVO6 is a potential multiferroic material with antiferromagnetic (AFM) spin configuration. It has a magnetic moment of 1 μB in a one unit cell originating from the non-bonding orbital dxy in a majority spin channel and a band gap of 1.45 eV with proper U. The large BEC (Born effective charge) of Pb and Ti shows that the stereochemical activity of Pb and Ti may provide the possibility of switchable paths for the ferroelectricity in this hypothetical material. The insulating property and the lower resistivity in the recent prepared PbVO3 can be significantly improved by adopting the Ti.     

Ab initio study on phase transition and magnetism of BiFeO3 under pressure

In this paper the first-principles calculations within local spin density approximation (LSDA)+U show that BiFeO3 experiences a mixed phase state with P4mm structure being the intermediate phase before the pressure of phase transition is reached. The critical pressure for the insulator-metal transition (IMT) is found to be about 50 GPa. A pressure induced crossover of high-spin states and low-spin states is observed close to the IMT pressure in R3c structure. The LSDA+U calculations account well for the mechanism of the IMT and crossover of spin states predicted in recent experiment (Ref.[1]).     

Effect of doping on the luminescence properties of Li2B4O7

In this work, we have investigated the influence of doping agents on the luminescence properties of multiply doped Li₂B₄O₇ and the temperature lag between TSL materials and the heating element. The results of thermoluminescence studies show that the Ag doping leads to the appearance of a new glow curve peak at 165 °C and the increasing sensitivity of Li₂B₄O₇:Cu,Ag,P is correlated with copper and phosphate concentrations. Under the excitation at 245 nm the emission spectra show maxima at 365 and 450 nm in the ceramic, crystal and glass. The low energy shift in the latter system might be related to the local structural distortion in the glass around Cu⁺ ions.     

Synthesis and characterization of thermoluminescent Li2B4O7 nanophosphor

Lithium borate (Li₂B₄O₇) is a low Z_eff, tissue equivalent material that is commonly used for medical dosimetry using the thermoluminescence (TL) technique. Nanocrystals of lithium borate were synthesized by the combustion method for the first time in the laboratory. TL characteristics of the synthesized material were studied and compared with those of commercially available microcrystalline Li₂B₄O₇. The optimum pre-irradiation annealing condition was found to be 300 °C for 10 min and that of post-irradiation annealing was 300 °C for 30 min. The synthesized Li₂B₄O₇ nanophosphor has very poor sensitivity for low doses of gamma up to 10¹ Gy whereas from 10¹ to 4.5×10² Gy this phosphor exhibits a linear response and then from 4.5×10² to 10³ Gy it shows supralinearity. Thermoluminescence properties of Li₂B₄O₇ nanophosphor doped with Cu has also been investigated in this paper. It shows low fading and a linear response over a wide range of gamma radiation from 1×10² to 5×10³ Gy. Therefore the synthesized lithium borate nanophosphor doped with Cu may be used for high dose measurements of gamma radiations.     

纯Cr2O3包覆Li4Ti5O12微球的制备及其储锂性能研究

The pure Cr₂O₃ coated Li₄Ti₅O₁₂ microspheres were prepared by a facile and cheap solutionbased method with basic chromium(III) nitrate solution (pH=11.9). And their Li-storage properties were investigated as anode materials for lithium rechargeable batteries. The pure Cr₂O₃ works as an adhesive interface to strengthen the connections between Li₄Ti₅O₁₂ particles, providing more electric conduction channels, and reduce the inter-particle resistance. Moreover, LixCr₂O₃, formed by the lithiation of Cr₂O₃, can further stabilize Li₇Ti₅O₁₂ with high electric conductivity on the surface of particles. While in the acid chromium solution (pH=3.2) modification, besides Cr₂O₃, Li₂CrO₄ and TiO₂ phases were also found in the final product. Li₂CrO₄ is toxic and the presence of TiO₂ is not welcome to improve the electrochemical performance of Li₄Ti₅O₁₂ microspheres. The reversible capacity of 1% Cr₂O₃-coated sample with the basic chromium solution modification was 180 mAh/g at 0.1 C, and 134 mAh/g at 10 C. Moreover, it was even as high as 127 mAh/g at 5 C after 600 cycles. At-20℃, its reversible specific capacity was still as high as 118 mAh/g.     

Influence of reducing annealing on the luminescent properties of Li2B4O7:Cu single crystals

Li₂B₄O₇:Cu single-crystal annealing in the reducing environment results in a sharp drop of intensity of thermoluminescence (TSL) and X-ray luminescence (XL) peaks. It was suggested that during annealing in the reducing environment, an oxygen vacancy is produced in the LTB structure at the bridging oxygen atom site. Oxygen vacancy charge compensation takes place at the expense of reduction of the doping Cu⁺ ion to the Cu⁰ state. In this case the A⁰-type thermoluminescence center formation mechanism due to irradiation becomes impossible.     

Effect of sintering temperature and the particle size on the structural and magnetic properties of nanocrystalline Li0.5Fe2.5O4

Sintering temperature and particle size dependent structural and magnetic properties of lithium ferrite (Li_0.5Fe_2.5O₄) were synthesized and sintered at four different temperatures ranging from 875 to 1475 K in the step of 200 K. The sample sintered at 875 K was also treated for four different sintering times ranging from 4 to 16 h. Samples sintered at 1475 K have the cubic spinel structure with a small amount of α-Fe₂O₃ (hematite) and γ-Fe₂O₃ (maghemite). The samples sintered at≤1275 K do not show hematite and maghemite phases and the crystals form the single phase spinel structure with the cation ordering on octahedral sites. Particle size of lithium ferrite is in the range of 13-45 nm, and is depend on the sintering temperature and sintering time. The saturation magnetization increased from 45 to 76 emu/g and coercivity decreases from 151 to 139 Oe with an increase in particle size. Magnetization temperature curve recorded in ZFC and FC modes in an external magnetic field of 100 Oe. Typical blocking effects are observed below about 244 K. The dielectric constant increases with an increase in sintering temperature and particle size.     

Al掺杂的尖晶石型LiMn2O4的结构和电子性质

采用基于密度泛函理论的第一性原理方法, 在广义梯度近似(GGA)和GGA+U方法下对尖晶石型LiMn₂O₄及其Al掺杂 的尖晶石型LiAl_0.125Mn_1.875O₄晶体的结构和电子性质进行了计算. 结果表明: 采用GGA方法得到尖晶石型LiMn₂O₄是立方晶系结构, 其中的Mn离子为+3.5价, 无法解释它的Jahn-Teller 畸变. 给出的LiMn₂O₄能带结构特征也与实验结果不符. 而采用GGA+U方法得到在低温下的LiMn₂O₄和其掺杂 体系LiAl_0.125Mn_1.875O₄的晶体都是正交结构, 与实验一致. 也能明确地确定Mn的两种价态Mn³⁺/Mn⁴⁺的分布并且能够说明Mn³⁺O₆的z方向有明显的Jahn-Teller 畸变, 而Mn⁴⁺O₆则没有畸变. LiMn₂O₄的能带结构与实验比较也能够符合. 采用GGA+U方法对Al掺杂体系的LiAl_0.125Mn_1.875O₄的研究表明, 用Al替换一个Mn不会明显地改变晶体的电子性质, 但可以有效地消除Al³⁺O₆ 八面体的Jahn-Teller畸变, 从而改善正极材料LiMn₂O₄的性能, 这与电化学实验的观察结果相一致.     

Ab initio studies on n-type and p-type Li4Ti5O12

This paper studies the structure and electronic properties of Li4Ti5O12, as anode material for lithium ion batteries, from first principles calculations. The results suggest that there are two kinds of unit cell of Li4Ti5O12: n-type and p-type. The two unit cells have different structures and electronic properties:the n-type with two 16d site Li ions is metallic by electron, while the p-type with three 16d Li ions is metallic by hole. However, the Li4Ti5O12 is an insulator. It is very interesting that one n-type cell and two p-type cells constitute one Li4Ti5O12 supercell which is insulating. The results show that the intercalation potential obtained with a p-type unit cell with one additional electron is quite close to the experimental value of 1.5 V.     

Ab initio investigations of the charge transport properties of endohedral M@C20（M=Na and K）metallofullerenes

Using density functional theory and quantum transport calculations based on nonequilibum Green’s function formalism,we investigate the charge transport properties of endohedral M@C 20 (M=Na and K) metallofullerenes.Our results show that the conductance of C 20 fullerene can be obviously improved by insertion of alkali atom at its centre.Both linear and nonlinear sections are found on the I-V curves of the Au-M@C 20-Au two-probe systems.The novel negative differential resistance behaviour is also observed in Na@C 20 molecule but not in K@C 20.     

Effect of Li2O and CoO-doping of CuO/Fe2O3 system on its surface and catalytic properties

Physicochemical, surface and catalytic properties of pure and doped CuO/Fe₂O₃ system were investigated using X-ray diffraction (XRD), energy dispersive X-ray analysis (EDX), nitrogen adsorption at −196 °C and CO-oxidation by O₂ at 80-220 °C using a static method. The dopants were Li₂O (2.5 mol%) and CoO (2.5 and 5 mol%). The results revealed that the increase in precalcination temperature from 400 to 600 °C and Li₂O-doping of CuO/Fe₂O₃ system enhanced CuFe₂O₄ formation. However, heating both pure and doped solids at 600 °C did not lead to complete conversion of reacting oxides into CuFe₂O₄. The promotion effect of Li₂O dopant was attributed to dissolution of some of dopant ions in the lattices of CuO and Fe₂O₃ with subsequent increase in the mobility of reacting cations. CoO-doping led also to the formation of mixed ferrite Co_xCu_1−xFe₂O₄. The doping process of the system investigated decreased to a large extent the crystallite size of unreacted portion of Fe₂O₃ in mixed solids calcined at 600 °C. This process led to a significant increase in the S_BET of the treated solids. Doping CuO/Fe₂O₃ system with either Li₂O or CoO, followed by calcination at 400 and 600 °C decreased its catalytic activity in CO-oxidation by O₂. However, the activation energy of the catalyzed reaction was not much affected by doping.     

Ab initio study of the EFG tensor at Cd impurities in Sc2O3 semiconductor

We present an ab initio study of diluted Cd impurities localized at both cation sites of the semiconductor Sc₂O₃. The electric-field-gradient (EFG) tensor at Cd impurities located at both cationic sites of the host structure was determined from the calculation of the electronic structure of the doped system. Calculations were performed with the full-potential augmented-plane wave plus local orbitals (APW+lo) method within the framework of the density functional theory. We studied the atomic structural relaxations and the perturbation of the electronic charge density induced by the impurities in the host system in a fully self-consistent way. We showed that the Cd impurity introduces an increase of 8% in the nearest oxygen neighbors bond-lengths, changing the EFG sign for probes located at the asymmetric cation site. The APW+lo predictions for the charged state of the Cd impurity were compared with EFG results existent in the literature, coming from time-differential γ–γ perturbed-angular-correlations experiments performed on ¹¹¹Cd-implanted Sc₂O₃ powder samples. From the excellent agreement between theory and experiment, we can strongly suggest that the Cd acceptor impurities are ionized at room temperature. Finally, we showed that simple calculations like those performed within the point-charge model with antishielding factors do not correctly describe the problem of a Cd impurity in Sc₂O₃.     

Significant effect of electron transfer between current collector and active material on high rate performance of Li4Ti5O12

The rate and cycling performances of the electrode materials are affected by many factors in a practical complicated electrode process. Learning about the limiting step in a practical electrochemical reaction is very important to effectively improve the electrochemical performances of the electrode materials. Li₄Ti₅O₁₂, as a zero-strain material, has been considered as a promising anode material for long life Li-ion batteries. In this study, our results show that the Li₄Ti₅O₁₂ pasted on Cu or graphite felt current collector exhibits unexpectedly higher rate performance than on Al current collector. For Li₄Ti₅O₁₂, the electron transfer between current collector and active material is the critical factor that affects its rate and cycling performances.     

Spinel lithium titanate (Li4Ti5O12) as novel anode material for room-temperature sodium-ion battery

This is the first time that a novel anode material, spinel Li₄Ti₅O₁₂ which is well known as a “zero-strain” anode material for lithium storage, has been introduced for sodium-ion battery. The Li₄Ti₅O₁₂ shows an average Na storage voltage of about 1.0 V and a reversible capacity of about 145 mAh/g, thereby making it a promising anode for sodium-ion battery. E_x-situ X-ray diffraction (XRD) is used to investigate the structure change in the Na insertion/deinsertion process. Based on this, a possible Na storage mechanism is proposed.     

A novel UV-emitting phosphor: Li6CaB3O8.5:Pb

Pure Li₆CaB₃O_8.5 and Li₆Ca_1−xPb_xB₃O_8.5 (0.005≤x≤0.04) materials were prepared by a solution combustion synthesis method. The phase of synthesized materials was determined using the powder XRD and FTIR. The synthesized materials were investigated using spectrofluorometer at room temperature. The emission and excitation bands of the synthesized phosphors were observed at 307 and 268 nm, respectively. The dependence of the emission intensity on the Pb²⁺ concentration for the Li₆Ca_1−xPb_xB₃O_8.5 (0.005≤x≤0.04) was studied and observed that the optimum concentration of Pb²⁺ in phosphor is 0.01 mol. The Stokes shift of the synthesized phosphor was calculated to be 4740 cm^-1.     

Comparison of magnetic properties in LixCoO2 and its decomposition products LiCo2O4 and Co3O4

Thermal stability of cathode material in the charged state is an important aspect for the safety of rechargeable batteries. It is well known that layered Li_xCoO₂ decomposes to a mixture of LiCoO₂ and Co₃O₄ at elevated temperatures. However, not many experimental evidences exist on intermediate phases those may form during the decomposition. Using magnetic measurements we show that it is possible to distinguish between the spinels LiCo₂O₄ and Co₃O₄ and thereby follow the decomposition of Li_xCoO₂. We characterize the magnetic behavior of thermally aged Li_xCoO₂ (x = 0.98, 0.76, 0.55) with increasing annealing time. Our results reveal the appearance of magnetic ordering in the thermally degraded products. The detailed analysis illustrates that the formation of Co₃O₄ is preceded by the formation of a meta stable LiCo₂O₄ phase.     

Synthesis and properties of Au-Fe3O4 and Ag-Fe3O4 heterodimeric nanoparticles

Monodisperse Au-Fe 3 O 4 heterodimeric nanoparticles (NPs) were prepared by injecting precursors into a hot reaction solution.The size of Au and Fe 3 O 4 particles can be controlled by changing the injection temperature.UV-Vis spectra show that the surface plasma resonance band of Au-Fe 3 O 4 heterodimeric NPs was evidently red-shifted compared with the resonance band of Au NPs of similar size.The as-prepared heterodimeric Au-Fe 3 O 4 NPs exhibited superparamagnetic properties at room temperature.The Ag-Fe 3 O 4 heterodimeric NPs were also prepared by this synthetic method simply using AgNO 3 as precursor instead of HAuCl 4.It is indicated that the reported method can be readily extended to the synthesis of other noble metal conjugated heterodimeric NPs.     

Mo掺杂SrBi4Ti4O15陶瓷的铁电介电性能

用传统的固相烧结工艺，制备了钼掺杂铁电陶瓷样品SrBi₄Ti₄O₁₅(SBTi)铁电陶瓷SrBi_4-2x/3Ti_4-xMo_xO₁₅(x=0.00，0.003，0.012，0.03，0.06，0.09).X射线衍射的结果表明，样品均为单一的层状钙钛矿结构相，Mo掺杂未改变SBTi的晶体结构.通过扫描电子显微镜观测发现，样品晶粒为片状，随掺杂量的增加，晶粒逐 关键词： 4Ti₄O₁₅')" href="#">SrBi₄Ti₄O₁₅ Mo掺杂 剩余极化 居里温度     

糠醇辅助的聚合凝胶法制备纳米Li4Ti5O12负极材料

以硝酸锂、钛酸正丁酯和糠醇为反应物,采用糠醇聚合凝胶法制备了纳米Li₄Ti₅O₁₂粉体．利用XRD、SEM和BET比表面测试对产物进行了表征,并研究了纳米Li₄Ti₅O₁₂粉体作为锂离子电池负极材料的电化学性能．在700℃或更高温度烧结时产物为纯相的尖晶石型．通过柠檬酸、聚乙烯吡咯烷酮、十六烷基三甲基溴化铵(CTAB)表面活性剂的加入能够减少产物颗粒的团聚程度,增大粉体的比表面积,提高其电化学性能．加入0.5 g CTAB、700℃烧结12 h的Li₄Ti₅O₁₂粉体展示出最高的比容量和最佳的循环性能,10 C下充电比容量高达156.7 mAh/g．