Crystallization on surfaces of well-defined topography

Single crystals of calcite with regular patterned surfaces comprising close-packed arrays of hemispherical cavities or domes were produced by crystallization on colloidal monolayers or PDMS replicas of these monolayers, respectively. Perfect replication of the substrate topography was achieved for all colloidal particles, irrespective of their size and surface chemistry when the substrate geometry permitted unrestricted ion flow to the growing crystal. This work demonstrates that crystallization within a mould provides a very general route to producing single crystals with curved surfaces and unusual morphologies and that such patterning can be applied from the micro- to the nanoscale.     

Electrochemical N2 splitting at well-defined metal complexes

In this short review, we discuss recent examples of well-defined metal complexes capable to split dinitrogen electrochemically. Large progress has been made in the chemical dinitrogen splitting with molecular complexes during the last couple of years; however, electrochemical N₂ splitting remains scarce. Herein, three distinct examples, which were investigated in depth, are discussed. The iron complex 2⁺ converts N₂ to ammonia via an associative mechanism. With the rhenium pincer complex 3, N₂ is cleaved via a dissociative mechanism forming a very stable Re^V-nitride complex. The aluminium complex 6 also converts N₂ electrochemically to ammonia; however, the mechanism is distinctly different to that in 2⁺ or 3, as there is no evidence for a metal–N₂ interaction and likely the ligand acts as a hydride donor.     

Electrochemical oxidation of aliphatic amines and their attachment to carbon and metal surfaces

The electrochemical oxidation of aliphatic amines (primary, secondary, and tertiary) has been investigated by cyclic voltammetry and preparative electrolysis. The oxidation mechanisms have been established, and the lifetimes of the radical cations have been measured for secondary and tertiary amines. These results have been put in parallel with the attachment of amines to glassy carbon, Au, and Pt electrodes by cyclic voltammetry, X-ray photoelectron spectroscopy (XPS), and infrared reflection-absorption spectroscopy (IRRAS). It is then possible to show that it is not the radical cation but the radical obtained after the deprotonation which reacts with the electrode surface. XPS results also point to the existence of a covalent bond between Au or Pt and the organic moiety.     

Study of complement activation on well-defined surfaces using surface plasmon resonance

It has been accepted that covalent immobilization of C3b on artificial materials is the most important step to initiate the complement activation. However, there are few studies that have directly demonstrated covalent immobilization of C3b on artificial surfaces. In this study, model thin layers were prepared by the self-assembled monolayer method to produce a surface covered with hydroxyl or methyl groups using mercaptododecane (CH₃-SAM) and mercaptoundecanol (OH-SAM). Interactions of the complement system with the model surfaces were studied using a surface plasmon resonance instrument. The OH-SAM immobilized C3b, resulting in activating of the complement system through the alternative pathway in Veronal-buffered saline, but this surface did not activate the classical pathway. However, the OH-SAM could not activate the alternative pathway in Veronal-buffered saline containing 10 mM EGTA and 2 mM MgCl₂ that is believed not to interfere with the activation of the alternative pathway. The hydrophobic CH₃-SAM surface could not activate the classical pathway, but activated the alternative pathway, although the extent was small.     

Electrochemical characterization for ion-implanted materials surfaces

Studies on the surface modification of materials by ion implantation have been carried out during the past 25 years in RIKEN. In this paper, results of electrochemical studies on the ion-implanted materials are described to realize the unique substances formed by the ion implantation. The ion implantation is used for compositional and structural surface modification of iron and carbon substrates. Voltammetric behavior of ion-implanted iron electrodes characterized effects of the ion implantation on anodic dissolution and passivation properties of the modified surfaces. Typical electrode reaction properties of ion-implanted carbon electrodes clearly were related to the effects of structural modification of the carbon surfaces.     

Electrochemical pore formation onto semiconductor surfaces

In this paper, a review on electrochemical porous etching of semiconductors is proposed. After a brief history, chemical and electrochemical etching of semiconductors are considered and the pore formation models are discussed. The influences of the key parameters on porous etching are illustrated by listing the numerous pore morphologies reported in the literature. A short inventory of typical applications in various fields is given in the conclusion.     

Nanoscale evaluation of lubricity on well-defined polymer brush surfaces using QCM-D and AFM

For preparing a “highly lubricated biointerface”, which has both excellent lubricity and biocompatibility, we investigated the factors responsible for resistance to friction during polymer grafting. We prepared poly(2-methacryloyloxyethyl phosphorylcholine) (PMPC), poly(2-hydroxyethyl methacrylate) (PHEMA), and poly(methyl methacrylate) (PMMA) brush layers with high graft density and well-controlled thickness using atom transfer radical polymerization (ATRP). We measured the water absorptivity in the polymer brush layers and the viscoelasticity of the polymer-hydrated layers using a quartz crystal microbalance with dissipation monitoring (QCM-D) measurements. The PMPC brush layer had the highest water absorptivity, while the PMPC-hydrated layer had the highest fluidity. The friction properties of the polymer brush layers were determined in air, water, and toluene by atomic force microscopy (AFM). The friction on each polymer brush decreased only when a good solvent was chosen for each polymer. In conclusion, the brush layer possessing high water absorptivity and fluidity in water contributes to reduce friction. PMPC grafting is an effective and promising method for obtaining highly lubricated biointerfaces.     

Electrochemical defluorination of carbon nanotubes

An electrochemical procedure for the removal of fluorine from the walls of fluorinated monolayer carbon nanotubes was suggested. According to element analysis data, fluorine was completely removed. According to UV-Vis-Nir and Raman spectroscopic studies, the initial structure of fluorinated carbon nanotubes was almost completely restored.     

Assembled monolayers of Mo3S4(4+) clusters on well-defined surfaces

A class of inorganic monolayers formed by assembling the molybdenum-sulfur cluster, Mo3S4(4+), onto a well-defined Au(111) surface is presented. The monolayers have been comprehensively characterized by electrochemistry, X-ray photoelectron spectroscopy (XPS), and in situ scanning tunneling microscopy (in situ STM). The voltammetric data show strong reductive and oxidative desorption signals from Au-S interactions, supported by the presence of both S and Mo signals in XPS. In situ STM shows many small pits in the dense adlayers uniformly spread over the surface, which is a typical feature of self-assembled monolayers (SAMs) of alkanethiols. The density of the pits is ca. 23 (+/-5)% and is significantly higher than for straight-chain alkanethiol SAMs with a single -SH group. The pit shapes are irregular, suggesting multiple Au-S interactions from Mo3S4(4+). High resolution images disclose bright round spots of ca. 8 A diameter representing individual molecules in the SAM. This is the first example of in situ monolayer formation by a metal-chalcogenide cluster directly anchored onto the gold surface through core ligands and offers a simple way to prepare a new class of functionalized inorganic monolayers.     

Electrochemical biosensor based on CdS nanostructure surfaces

Well-defined hexangularly faced CdS nanorod arrays have been grown directly on a conductive ITO glass via a facile one-step and non-template hydrothermal approach. Gold nanoparticles were decorated onto the nanorods to enhance the electron transfer process of electrode. Glucose oxidase (GOD) was then immobilized on the CdS through crosslinking with chitosan (CS), which resulted in a glucose biosensor with high enzyme loading and excellent sensitivity. Such a chitosan-encapsulated GOD-based biosensor revealed a relatively rapid response time of less than 50s, and an approximate linear detection range of glucose concentration, from 50 to 500 μmol L(-1) with a detection limit of 38 μmol L(-1) and an electrode sensitivity of 5.9 μA mM(-1).     

Electrochemical functionalization of carbon surfaces by aromatic azide or alkyne molecules: a versatile platform for click chemistry

The electrochemical reduction of phenylazide or phenylacetylene diazonium salts leads to the grafting of azido or ethynyl groups onto the surface of carbon electrodes. In the presence of copper(I) catalyst, these azide- or alkyne-modified surfaces react efficiently and rapidly with compounds bearing an acetylene or azide function, thus forming a covalent 1,2,3-triazole linkage by means of click chemistry. This was illustrated with the surface coupling of ferrocenes functionalized with an ethynyl or azido group and the biomolecule biotin terminated by an acetylene group.     

Combining aryltriazenes and electrogenerated acids to create well-defined aryl-tethered films and patterns on surfaces

Immobilization of submonolayers to 4-5 multilayers of organic molecules on carbon surfaces can be performed by in situ generation of aryl radicals from aryltriazenes. The central idea consists of oxidatively forming an electrogenerated acid of N,N'-diphenylhydrazine to convert the aryltriazene to the corresponding diazonium salt in the diffusion layer of the electrode. In a second step, the diazonium salt is reduced at the same electrode to give a surface of covalently attached aryl groups. In this manner, various moieties tethered to the aryl groups can be immobilized on the surface. Here a ferrocenyl group was introduced as redox marker, the electrochemical signal of which is extraordinarily well-defined. This behavior is independent of film thickness, the latter being easily controlled by the number of repetitive cycles performed. It is also demonstrated that the new approach is suitable for patterning of surfaces using scanning electrochemical microscopy.     

Electrochemical carboxylation with carbon dioxide

Studies carried out in the past two years on electrochemical fixation of carbon dioxide with carbon-carbon bond formation, so-called electrochemical carboxylation or electrocarboxylation, are reviewed. Among about twenty papers on electrochemical carboxylation published from 2014 to the present, recent advances in electrochemical carboxylation regarding asymmetric carboxylation, sacrificial anode-free carboxylation, and carboxylation following aryl radical cyclization are focused on and discussed.     

Electrochemical doping of chirality-resolved carbon nanotubes

Raman spectra of electrochemically charged single-wall carbon nanotubes (HiPco) were studied by five different laser photon energies between 1.56 and 1.92 eV. The bands of radial breathing modes (RBM) were assigned to defined chiralities by using the experimental Kataura plot. The particular (n,m) tubes exhibit different sensitivity to electrochemical doping, monitored as the attenuation of the RBM intensities. Tubes which are in good resonance with the exciting laser exhibit strong doping-induced drop of the RBM intensity. On the other hand, tubes whose optical transition energy is larger than the energy of an exciting photon show only small changes of their RBM intensities upon doping. This rule presents a tool for analysis of mixtures of single-walled carbon tubes of unknown chiralities. It also asks for a re-interpretation of some earlier results which were reported on the diameter-selectivity of doping. The radial breathing mode in strongly n- or p-doped nanotubes exhibited a blue-shift. A suggested interpretation follows from the charging-induced structural changes of SWCNTs bundles, which also includes a partial de-bundling of tube ropes.