某些有机钨卤化物RC~5H~4(CO)~3WX(R=MeCO, MeO~2C, EtO~2C; X=Cl, Br, I)的合成及结构鉴定

通过酮基或酯基官能团取代的环戊二烯基(三羰基)钨钠 RC~5H~4(CO)~3WN(R=MeCO, MeO~2C, EtO~2C 与I~2、Px~3(X=Cl、Br、I), PhPCl~2, p-MeC~6H~4PCl~2或MeAsI~2 反应, 结果得到8个含相应官能团的有机钨卤化物。用X射线衍射法鉴定了其中 R=MeCO, X=Br的单晶分子结构, 晶体属单斜晶系, 空间群P~21。     

Synthesis of carbaalane halogen derivatives

The carbaalane halogen derivatives [(AlX)(6)(AlNMe(3))(2)(CCH(2)CH(2)SiMe(3))(6)] (X = F (9), Cl (7), Br (10), I (11)) were prepared in toluene from [(AlH)(6)(AlNMe(3))(2)(CCH(2)CH(2)SiMe(3))(6)] (6) and BF(3).OEt(2), BX(3) (X = Br, I), Me(3)SnF, and Me(3)SiX (X = Cl, Br, I), respectively. A partially halogenated product [(AlH)(2)(AlX)(4)(AlNMe(3))(2)(CCH(2)CH(2)SiMe(3))(6)] (12) (X = Cl (approximately 40%), Br (approximately 60%)) was obtained from 5 and impure BBr(3). [(AlH)(6)(AlNMe(3))(2)(CCH(2)Ph)(6)] (5) was converted to [(AlX)(6)(AlNMe(3))(2)(CCH(2)Ph)(6)] (X = F (13), Cl (14), Br (15), I (16)) using BF(3).OEt(2) and Me(3)SiX (X = Cl, Br, I), respectively. The X-ray single-crystal structures of 11.C(6)H(6), 12.3C(7)H(8), 13.6C(7)H(8), and 15.4C(7)H(8) were determined. Compounds 7 and 9-11 are soluble in benzene/toluene and could be well characterized by NMR spectroscopy and MS (EI) spectrometry. The results demonstrate the facile substitution of the hydridic hydrogen atoms in 5 and 6 by the halides with different reagents.     

Highly Efficient Palladacycle/Dihydroimidazolium Chloride System for the Suzuki‐Miyaura Cross‐Coupling of Aryl Halides (I,Br, Cl) with Arylboronic Acids

A combination of a tertiary amine‐based palladacycle and an N‐heterocyclic carbene ligand precursor ( 1 , N,N‐bis‐mesityl‐4,5‐dihydroimidazolium chloride) has been applied to catalyze the Suzuki‐Miyaura cross‐coupling of aryl halides with arylboronic acids. The substrate scope is general: a variety of electron rich and deficient aryl halides (I, Br, Cl) and arylboronic acids were found to undergo the cross‐coupling reaction in good to excellent yields at low catalyst loading of 0.01–1 mol%.     

含烯烃配体的过渡金属卡宾配合物的研究 XIII: π-环戊二烯基(二羰基)(芳酰基)铁配合物的新合成法及其晶体结构

用环戊二烯(三羰基铁)与芳基锂在低温时反应, 生成的酰羰基锂盐随后在CH2Cl2中于-60℃或在水溶液中于0℃用Et3OBF4烷基化, 以中等产率获得组成为C5H5(CO)2Fe(COAr)的5个π-环戊二烯基(二羰基)(芳甲酰基)铁络合物, 新化合物用元素分析, IR, HNMR和质谱鉴定了, 并用X射线衍射研究了C5H5(CO)2Fe(p-CF3C6H4CO)的晶体结构.     

含烯烃配体的过渡金属卡宾配合物的研究II.异戊二烯二羰基[乙氧基(苯基)卡宾]铁配合物的异构化产物的合成,波谱和结构研究及四羰基[乙氧基(五氯苯基)卡宾]铁的晶体结构

异戊二烯三羰基铁(1)与芳基锂ArLi(Ar=C6H5,ρ-CH3C6H4,ρ-CH3OC6H4,ρ-CF3C6H4)在低温下反应,再用Et3OBF4烷基化,可获得组成为C5H8(CO)2FeC(OC2H5)Ar的标题化合物的异构化产物(2一5)。当用LiC6Cl5作亲核试剂,在相同条件下与1反应时,只生成已知的配合物(CO4)FeC(OC2H5)C6Cl5(6)。由单晶X射线衍射数据推断出, 2和6的分子结构都属于单斜晶系,Z=4. 2的空间群为C2h[5]-P21/n,a=8.544(2), b=14.494(5), c=12.309(4)`A,β=96.16(2)`;6的空间群为C2h[5]-P21/c, a=14.126(3), b=6.805(1), c=19.182(5)A,β=103.58(2)`. 2和6的结构用SHELXTL直接法程序解出并经块矩阵最小二乘法修正,R分别为0.066和0.043。     

Intermediates of halogen addition to phenylethynes and protonation of phenylethynyl halides. Open halovinyl cations, bridged halonium, or phenyl-bridged ions: a substituent effect study by DFT and GIAO-DFT

Formation of alpha-phenyl-beta-halovinyl cation, beta-phenyl-alpha-halovinyl cation, as well as the halogen-bridged and the spirocyclic phenyl-bridged cations as intermediates of protonation of phenylethynyl halides or by halogen addition to phenylethynes was evaluated by DFT at B3LYP/6-31+G(d) and, for comparison in representative cases, by B3LYP/6-311++G(d,p). Relative stabilities of the resulting minima were gauged as a function of substituents on the phenyl group with p-OH, p-OMe, p-H, p-CF3, p-CN, and p-NO2 and with p-OMeH+, p-NO2H+, and p-N2+. In the majority of cases, the alpha-aryl-beta-halovinyl cations were identified as the most likely intermediates, irrespective of X and for most R groups. For R = p-N2+ (with X = Br and Cl), R = CNH+ (with X = Cl), and R = MeOH+ (with X = Br), the corresponding beta-aryl-alpha-halovinyl cations become more stable than alpha-aryl-beta-halovinyl cations (but in most cases with a relatively small stability difference). Whereas competitive formation of the spirocyclic aryl bridged cations via this route appears remote, with R = N2+ and R = NO2H+ as substituents (with X = Br), cyclic halonium ions could intervene, since their relative stabilities are within approximately 4 kcal/mol of the lowest energy vinyl cations. Geometrical features, GIAO NMR chemical shifts, and NPA-derived charges were used to gain insight into the structural/electronic features in the resulting mono and dications. The study provides a basis for stable ion and solvolytic/kinetic studies on a series of substituted phenylethynyl halides that are being synthesized.     

Thermolysis of tert-butyl phenylperacetates: delicate control of the rates through contributions from translational and rotational entropy

The first-order rate constants (k(Y)) at several temperatures in CDCl(3) were measured for thermal decompositions of YC(6)H(4)CH(2)CO(3)C(CH(3))(3) with Y being p-OCH(3), p-OPh, p-CH(3), p-Ph, p-H, p-Cl, m-Cl, and p-NO(2). The relative rates (k(Y)/k(H)) exhibit excellent rho(+)/sigma(+) Hammett correlations with rho(+) < 0, indicating a polar TS. Activation parameters (DeltaH()(Y) and DeltaS()(Y)) and their differential terms (DeltaDeltaH()(Y)(-)(H) and DeltaDeltaS()(Y)(-)(H)) were obtained from the Eyring plot. Differential activation terms (DeltaDeltaH()(Y)(-)(H) and DeltaDeltaS()(Y)(-)(H)) disclose an isokinetic relation with p-CH(3), p-Ph, p-H, p-Cl, and m-Cl (isokinetic temp, 230 K). However, p-OCH(3), and p-OPh show negative deviations, and a positive deviation occurs with p-NO(2). Plot of DeltaDeltaH()(Y)(-)(H) vs sigma(+) exhibits a good linear relation (r = 0.95) with a slope (alpha(1) = -3.34). A better linear correlation (r = 0.97) and steeper slope (alpha(2) = -5.22) were observed for TDeltaDeltaS()(Y)(-)(H) vs sigma(+). Negatively larger slope (alpha(2) = -5.22) may point to entropy control of rates. Differential activation parameters (DeltaDeltaH()(Y)(-)(H) and DeltaDeltaS()(Y)(-)(H)) reflect variations of activation process. Differential activation entropies (DeltaDeltaS()(Y)(-)(H)) are discussed in terms of contributions of translational and rotational entropies. Similar deviation behaviors of p-OCH(3), p-OPh, and p-NO(2) were again observed for the both plots. p-NO(2) can strongly destabilize the cationic site of the polar TS but serves an eminent spin delocalizer for the homolytic TS.     

Coordinatively unsaturated W(IV)-bis(pyridine) complexes, a reactive source of W(IV)

Addition of 2 equiv of a sigma-donor ligand (L = pyridine, 4-picoline, or quinoline) to complexes of the type [W(NPh)(eta(4)-arene)(o-(Me3SiN)2C6H4)] (arene = CH3CH2C6H5 (3), CH3CH2CH2C6H5 (4)) gave the W(IV)L2 compounds, [W(NPh)(o-(Me3SiN)2C6H4)(C5H5N)2] (5), [W(NPh)(o-(Me3SiN)2C6H4)(p-C6H7N)2] (6), and [W(NPh)(o-(Me3SiN)2C6H4)(C9H7N)2] (7). Synthesis of compounds 5 and 6 by Na degrees reduction of [W(NPh)(o-(Me3SiN)2C6H4)Cl2] in the presence of 3 equiv of L (L = 5, pyridine or 6, 4-picoline) is also presented. Compounds 5, 6, and 7 display hindered rotation of the donor ligands about the W-N bonds, resulting from a steric interaction with the Me3Si groups of the diamide ligand. The coordinative unsaturation of 5 and 6 has also been explored. Compounds 5 and 6 readily react with either CO and PMe3 to generated the six coordinate complexes [W(NPh)(o-(Me3SiN)2C6H4)(C5H5N)2(CO)] (8a), [W(NPh)(o-(Me3SiN)2C6H4)(C6H7N)2(CO)] (8b), [W(NPh)(o-(Me3SiN)2C6H4)(C5H5N)(PMe3)2] (10a), and [W(NPh)(o-(Me3SiN)2C6H4)(C6H7N)(PMe3)2] (10b), respectively.     

Reactivity of iron(II) 5,10,15,20-tetraaryl-21-oxaporphyrin with arylmagnesium bromide: formation of paramagnetic six-coordinate complexes with two axial aryl groups

Coordination of sigma-aryl carbanions by chloroiron(II) 5,20-ditolyl-10,15-diphenyl-21-oxaporphyrin (ODTDPP)Fe(II)Cl has been followed by (1)H NMR spectroscopy. Addition of pentafluorophenyl Grignard reagent (C(6)F(5))MgBr to the toluene solution of (ODTDPP)Fe(II)Cl in the absence of dioxygen at 205 K resulted in the formation of the high-spin (ODTDPP)Fe(II)(C(6)F(5)). The titration of (ODTDPP)Fe(II)Cl with a solution of (C(6)H(5))MgBr carried at 205 K yields a rare six-coordinate species which binds two sigma-aryl ligands [(ODTDPP)Fe(II)(C(6)H(5))(2)](-). Warming of the [(ODTDPP)Fe(II)(C(6)H(5))(2)](-) solution above 270 K results in the decomposition to mono-sigma-phenyliron species (ODTDPP)Fe(II)(C(6)H(5)). Controlled oxidation of [(ODTDPP)Fe(II)(C(6)H(5))(2)](-) with Br(2) affords (ODTDPP)Fe(III)(C(6)H(5))Br, which demonstrates a typical (1)H NMR pattern of low-spin sigma-aryl iron(III) porphyrin. The considered oxidation mechanism involves the (ODTDPP)Fe(III)(C(6)H(5))(2) species, which is readily reduced to the iron(I) 21-oxaporphyrin, followed by oxidation with Br(2) and replacement of one bromide anion by aryl substituent. The (1)H NMR spectra of paramagnetic iron complexes have been examined in detail. Functional group assignments have been made with the use of selective deuteration. The peculiar (1)H NMR spectral features of [(ODTDPP)Fe(II)(p-CH(3)C(6)H(4))(2)](-) (sigma-p-tolyl: ortho, 30.8; meta, 53.6; para-CH(3), 42.1; furan: -16.0; beta-H pyrrole: -27.5, -34.3, -41.8 ppm, at 205 K) are without a parallel to any iron(II) porphyrin or heteroporphyrin and indicate a profound alteration of the electronic structure of iron(II) porphyrin upon the coordination of two sigma-aryls.     

Coupling of an aldehyde or ketone to pyridine mediated by a tungsten imido complex

The reactivity of W(NPh)(o-(Me3SiN)2C6H4)(py)2 and W(NPh)(o-(Me3SiN)2C6H4)(pic)2 (py=pyridine; pic=4-picoline) with unsaturated substrates has been investigated. Treatment of W(NPh)(o-(Me3SiN)2C6H4)(py)2 with diphenylacetylene or 2,3-dimethyl-1,3-butadiene generates W(NPh)(o-(Me3SiN)2C6H4)(eta2-PhCCPh) and W(NPh)(o-(Me3SiN)2C6H4)(eta4-CH2=C(Me)C(Me)=CH2), respectively, while the addition of ethylene to W(NPh)(o-(Me3SiN)2C6H4)(py)2 generates the known metallacycle W(NPh)(o-(Me3SiN)2C6H4)(CH2CH2CH2CH2). The addition of 2 equiv of acetone to W(NPh)(o-(Me3SiN)2C6H4)(pic)2 provides the azaoxymetallacycle W(NPh)(o-(Me3SiN)2C6H4)(OCH(Me)2)(OC(Me)2-o-C5H3N-p-Me), the result of acetone insertion into the ortho C-H bond of picoline. Similarily, the addition of 2 equiv of RC(O)H [R=Ph, tBu] to W(NPh)(o-(Me3SiN)2C6H4)(py)2 generates W(NPh)(o-(Me3SiN)2C6H4)(OCH2R)(OCHR-o-C5H4N) [R=Ph, tBu,]. In contrast, reaction between W(NPh)(o-(Me3SiN)2C6H4)(py)2 and 2-pyridine carboxaldehyde yields the diolate W(NPh)(o-(Me3SiN)2C6H4)(OCH(C5H4N)CH(C5H4N)O). The synthesis of W(NPh)(o-(Me3SiN)2C6H4)(PMe3)(py)(eta2-OC(H)C6H4-p-Me), formed by the addition of p-tolualdehyde to a mixture of W(NPh)(o-(Me3SiN)2C6H4)(py)2 and PMe3, suggests that an eta2-aldehyde intermediate is involved in the formation of the azaoxymetallacycle, while the isolation of W(NPh)(o-(Me3SiN)2C6H4)(Cl)(OC(Me)(CMe3)-o-C5H4N), formed by the reaction of pinacolone with W(NPh)(o-(Me3SiN)2C6H4)(py)2, in the presence of adventitious CH2Cl2, suggests that the reaction proceeds via the hydride W(NPh)(o-(Me3SiN)2C6H4)(H)(OC(Me)(CMe3)-o-C5H4N).     

五羰基锰烷基化合物的合成及光化学反应研究

用五羰基锰钾盐和相应的卤代物在乙醚中的金属化反应合成了五羰基锰烷基合物 (CO)5MnR（R = CH3,p-CH2C6H4CH3, p-CH2C6H4OCH3 ）,产率达到72-93％,将这些化合物与1-2当量(CH3)2(C6H5)SiH和(CH3)(C6H5)2SiH的C6D6溶液在5℃光解,分别得到五羰基锰硅烷基化合物(CO)5MnSi(C6H5)(CH3)2和(CO)5MnSi(C6H5)2(CH3)（产率达到70-88％）。在光化学反应中,还观察到相应甲烷,对二甲苯,和对甲基苯甲醚的定量生成,以及少量的Mn2(CO)10（<2％-4％）,(CO)4MnH(SiR3)2（<9%）副产物。     

Bending, twisting, and breaking CuCN chains to produce framework materials: the reactions of CuCN with alkali-metal halides

The reactions of the low-temperature polymorph of copper(I) cyanide (LT-CuCN) with concentrated aqueous alkali-metal halide solutions have been investigated. At room temperature, KX (X = Br and I) and CsX (X = Cl, Br, and I) produce the addition products K[Cu(2)(CN)(2)Br].H(2)O (I), K(3)[Cu(6)(CN)(6)I(3)].2H(2)O (II), Cs[Cu(3)(CN)(3)Cl] (III), Cs[Cu(3)(CN)(3)Br] (IV), and Cs(2)[Cu(4)(CN)(4)I(2)].H(2)O (V), with 3-D frameworks in which the -(CuCN)- chains present in CuCN persist. No reaction occurs, however, with NaX (X = Cl, Br, I) or KCl. The addition compounds, I-V, reconvert to CuCN when washed. Both low- and high-temperature polymorphs of CuCN (LT- and HT-CuCN) are produced, except in the case of Cs[Cu(3)(CN)(3)Cl] (III), which converts only to LT-CuCN. Heating similar AX-CuCN reaction mixtures under hydrothermal conditions at 453 K for 1 day produces single crystals of I-V suitable for structure determination. Under these more forcing conditions, reactions also occur with NaX (X = Cl, Br, I) and KCl. NaBr and KCl cause some conversion of LT-CuCN into HT-CuCN, while NaCl and NaI, respectively, react to form the mixed-valence Cu(I)/Cu(II) compounds [Cu(II)(OH(2))(4)][Cu(I)(4)(CN)(6)], a known phase, and [Cu(II)(OH(2))(4)][Cu(I)(4)(CN)(4)I(2)] (VI), a 3-D framework, which contains infinite -(CuCN)- chains. After 3 days of heating under hydrothermal conditions, the reaction between KI and CuCN produces [Cu(II)(OH(2))(4)][Cu(I)(2)(CN)I(2)](2) (VII), in which the CuCN chains are broken into single Cu-CN-Cu units, which in turn are linked into chains via iodine atoms and then into layers via long Cu-C and Cu-Cu interactions.     

Unusual reactions of [{micro-(phthalazine-N2:N3)}Fe2(micro-CO)(CO)6] with organolithium reagents. A novel coordination mode of 1,2-diazane diiron carbonyl compounds

[{Micro-(phthalazine-N2:N3)}Fe2(micro-CO)(CO)6](1) reacts with organolithium reagents, RLi (R = CH3, C6H5, p-CH3C6H4, p-CH3OC6H4, p-CF3C6H4, p-C6H5C6H4), followed by treatment with Me3SiCl to give the novel diiron carbonyl complexes with a saturated N-N six-membered diazane ring ligand, [{C6H4CH(R)NNCH2}Fe2(C=O)(CO)6](2, R = CH3; 3, R = C6H5; 4, R =p-CH3C6H4; 5, R =p-CH3OC6H4; 6, R =p-CF3C6H4; 7, R =p-C6H5C6H4). Compounds 4 and 5 were treated with [(NH4)2Ce(NO3)6] to afford the aryl-substituted phthalazine-coordinated diiron carbonyl compounds [(micro-{1-(p-CH3C6H4)-phthalazine-N2:N3})Fe2(micro-CO)(CO)6](8) and [(micro-{1-(p-CH3OC6H4)-phthalazine-N2:N3})Fe2(micro-CO)(CO)6](9), respectively. The structures of complexes 4 and 9 have been established by X-ray diffraction studies.     

New air-stable catalysts for general and efficient suzuki-miyaura cross-coupling reactions of heteroaryl chlorides

[reaction: see text] New air-stable PdCl(2){P(t)Bu(2)(p-R-Ph)}(2) (R = H, NMe(2), CF(3),) complexes represent simple, general, and efficient catalysts for the Suzuki-Miyaura cross-coupling reactions of aryl halides including five-membered heteroaryl halides and heteroatom-substituted six-membered heteroaryl chlorides with a diverse range of arylboronic acids. High product yields (89-99% isolated yields) and turn-over-numbers (10,000 TON) are observed.     

Pressure-induced formation of molecular B2X4(μ-X)2 (X = Cl, Br, I) species

Boron(III) halides (BX(3), where X = F, Cl, Br, I) at ambient pressure conditions exist as strictly monomeric, trigonal-planar molecules. Using correlated ab initio calculations, the three heavier halides (X = Cl, Br, I) are shown to possess B(2)X(4)(μ-X)(2) local minima, isostructural with the diborane molecule. The calculated dissociation barrier of the B(2)I(4)(μ-I)(2) species [≈14 kJ/mol with CCSD(T)/cc-pVTZ] may be high enough to allow cryogenic isolation. The remaining dimer structures are more labile, with dissociation barriers of less than 6 kJ/mol. All three dimer species may be stabilized by application of external pressure. Periodic density functional theory calculations predict a new dimer-based P1 solid, which becomes more stable than the P6(3)/m monomer-derived solids at 5 (X = I) to 15 (X = Cl) GPa. Metadynamics simulations suggest that B(2)X(4)(μ-X)(2)-based solids are the kinetically preferred product of pressurization of the P6(3)/m solid.     

Lower homologues (methyl, ethyl) of diorganotin derivatives of germyl (substituted) propanoic acids: spectroscopic elucidations and biological studies

Some novel lower homologues of diorganotin derivatives of germyl substituted propanoic acids with general formula [Ar(3)GeCH(R(1))CH(R(2))COO](2)SnR(2)(3), where Ar = p-CH(3)C(6)H(4), C(6)H(5), R(1) = p-CH(3)C(6)H(4), p-CH(3)OC(6)H(4), o-CH(3)OC(6)H(4), C(6)H(5), R(2) = H, CH(3), R(3) = CH(3), C(2)H(5) have been prepared by the condensation reaction of dialkyltin oxide and triarylgermyl(substituted) propanoic acid in 1 : 2 M ratio, respectively, and were characterized by IR, multinuclear ((1)H, (13)C, (119)Sn) NMR, (119 m)Sn M?ssbauer spectroscopy. The synthesized compounds were also screened for their toxicity and possible antibacterial, antifungal activities and found some encouraging results.     

Halogen exchange and scrambling between C-X and M-X' bonds in copper, nickel, and cobalt complexes of 6,6'-bis(bromo/chloromethyl)-2,2'-bipyridine. structural, electrochemical, and photochemical studies

The synthesis, reactivities, spectroscopic, electrochemical, and structural studies of copper(I), copper(II), nickel(II), and cobalt(II) complexes of 6,6'-bis(bromomethyl)-2,2'-bipyridine (bpy-Br2) and 6,6'-bis(chloromethyl)-2,2'-bipyridine (bpy-Cl2) have been reported. The copper(I) complex [CuI(bpy-Br2)2](ClO4) (1) has been obtained in two crystallographic modifications, in which the coordination geometry of the metal center has the D2d symmetry. The reaction between CuCl2.2H2O and bpy-Br2 has been followed spectrophotometrically at 45 degrees C over a period of 7 h, and a mechanism for the intramolecular halogen exchange and scrambling in the initially formed compound [CuII(bpy-Br2)Cl2] (5) has been proposed. Depending upon the reaction conditions, several halogen-exchanged products, namely [CuII(bpy-Br1.86Cl0.14)(Cl1.89Br0.11)] (2), [CuII(bpy-Br1.81Cl0.19)(Cl1.70Br0.30)(H2O)] (3), and [CuII(bpy-Br0.63Cl1.37)(Cl0.54Br1.46)] (4), have been isolated in crystalline form. The reaction between bpy-Cl2 and CuCl2.2H2O provides [CuII(bpy-Cl2)Cl2] (7) and [CuII(bpy-Cl2)Cl2(H2O)] (8), whereas CoCl2.6H2O and NiCl2.6H20 on reaction with bpy-Br2 under boiling condition produce [CoII(bpy-Br0.5Cl1.5)(ClBr)] (11) and [NiII(bpy-Br0.46Cl1.54)(Cl0.73Br1.27)(H2O)] (12), respectively. The X-ray structures determined for the 4-coordinate compounds 2, 4, and 7 show flattened tetrahedral geometry for the metal center with the D2 symmetry. Both 5-coordinate compounds 3 and 12 have square pyramidal geometry, and whereas the nickel(II) complex 12 has near-perfect geometry (tau = 0.015), considerable distortion is observed for the copper(II) complex 3 (tau = 0.25). Complexes [CuII(bpy-Cl2)Br2] (6) and [CuII(bpy-Br2)Br2] under boiling condition undergo photoreduction to produce the dimeric copper(I) complexes [{CuI(bpy-Cl1.30Br0.70)(mu-Br)}2](9) and [{CuI(bpy-Br2)(mu-Br)}2] (10), respectively. The fact that the photoreduction of [CuII(bpy-Cl2)Br2] (6) and [CuII(bpy-Br2)Br2] do not take place in absence of light has been established by spectrophotometric measurements. The crystal structures of 9 and 10 have been determined. The electrochemical behavior of all the copper complexes 1-10 has been studied in acetonitrile and dichloromethane. The E1/2 values for the CuI/CuII redox couples show strong solvent dependence and for a given system the E1/2 value is more positive in dichloromethane relative to that in acetonitrile. For the compounds [CuII(bpy-Br2-xClx)(Cl2-yBry)] (x = 0-2, y = 0-2), the E1/2 values become more positive with the increase of y value.     

l-Arginine as a base and ligand for the palladium-catalyzed C-C and C-N cross-coupling reactions in aqueous media

l-Arginine (2-amino-5-guanidinopentanoic acid) acts as a base and ligand in reaction medium, exhibits a very high activity and recyclability to palladium-catalyzed C-C and C-N cross-coupling reactions in aqueous media. The corresponding Suzuki products were obtained in good to excellent yields by using various aryl halides (I, Br, Cl). Also, the cross coupling reactions of arylboronic acids with various amines in aqueous medium proceed in good to excellent yield under same conditions. Furthermore, the catalyst could be easily separated from the reaction mixture and could be recycled several times without significant loss in its catalytic activity.     

Reactions of a stable silylene with halocarbons

An unusual product formation is observed for the insertion reaction of the thermally stable silylene Si[(NCH(2)Bu(t))(2)C(6)H(4)-1,2][abbrev. as Si(NN)] into the carbon-halogen bond of alkyl or aryl halides RHal (Hal=Cl, Br). In general, depending on the halogen, the reaction either results in a disilane of type (NN)Si(Hal)-(R)Si(NN) for Hal=Cl or a mixture of disilane and the monosilane (NN)Si(R)(Hal) for Hal=Br. The results are put into context to previously suggested mechanisms. The disilane (NN)Si(Hal)-(R)Si(NN)(Hal=Cl or Br) is thermally labile and mild thermolysis yields the corresponding monosilane (NN)Si(R)(Hal) and silylene 1. Additionally, strong evidence is presented for a radical pathway for the reaction of 1 and RHal.     

Synthetic,structural, and mechanistic studies on the oxidative addition of aromatic chlorides to a palladium (N-heterocyclic carbene) complex: relevance to catalytic amination

The oxidative addition products trans-[Pd(NHC)(2)(Ar)Cl] (NHC = cyclo-C[N(t)BuCH](2); Ar = Me-4-C(6)H(4), MeO-4-C(6)H(4), CO(2)Me-4-C(6)H(4)) have been isolated in good yields from the reactions of ArCl with the amination precatalyst [Pd(NHC)(2)] and structurally characterized. The former undergo reversible dissociation of one NHC ligand at elevated temperatures, and a value of 25.57 kcal mol(-1) has been determined for the Pd-NHC dissociation enthalpy in the case where Ar = Me-4-C(6)H(4). Detailed kinetic studies have established that the oxidative addition reactions proceed by a dissociative mechanism. Rate data for the oxidation addition of Me-4-C(6)H(4)Cl to [Pd(NHC)(2)] compared to that obtained for the [Pd(NHC)(2)]-catalyzed coupling of morpholine with 4-chlorotoluene are consistent with a rate-determining oxidative addition in the catalytic amination reaction. The relative rates of oxidative addition of the three aryl chlorides to [Pd(NHC)(2)] (CO(2)Me-4-C(6)H(4)Cl > Me-4-C(6)H(4)Cl > MeO-4-C(6)H(4)Cl) reflect the electronic nature of the substituents and also parallel observed trends in coupling efficiency for these aryl halides in aminations.