环境样品的热解-溶液吸收预处理及其汞同位素组成的测定

利用多道接收电感耦合等离子体质谱仪(MC-ICP-MS)可实现汞同位素的高精度测定,但对样品预处理的要求很高。目前,液态、固态、气态环境样品的预处理方式不一,存在一定的系统误差。该研究旨在尽可能统一各状态样品的预处理步骤。先将各样品中的不同形态汞富集转化为固体可吸附态,令其吸附在固态载体上,包括:采用金柱富集气体样品中的气态单质汞;以吹扫-金柱捕集法富集液体样品中的溶解气态汞和总汞;用膜过滤法收集大气中的颗粒态汞。最后以管式炉热解定量固态样品,采用高氧化效率的酸性高锰酸钾混合溶液吸收热解产生的Hg~0并氧化为Hg~(2+),保存于溶液中供MC-ICP-MS测定。优化了气体流速、吸收液体积及高锰酸钾浓度等参数,考察了方法空白、回收率及精密度等指标,并将建立的方法应用于大气气态单质汞、大气颗粒态汞、溶解气态汞、雨水总汞和土壤总汞等样品中汞同位素的分析。     

Amperometric Tyrosinase Biosensor Based on Carbon Black Paste Electrode for Sensitive Detection of Catechol in Environmental Samples

In this work, a renewable tyrosinase-based biosensor was developed for the detection of catechol, using a carbon black paste electrode, without any mediator. The effect of pH, type of electrolyte, and amount of tyrosinase enzyme were explored for optimum analytical performance. The best-performing biosensor in amperometric experiments at potential −0.2 V vs. Ag/AgCl (3 mol L⁻¹ KCl) was obtained using a 0.1 mol L⁻¹ phosphate buffer solution (pH 7.0) as electrolyte. Under optimized conditions, the proposed biosensor had two concentration linear ranges from 5.0×10⁻⁹ to 4.8×10⁻⁸ and from 4.8×10⁻⁸ to 8.5×10⁻⁶ mol L⁻¹ and a limit of detection of 1.5×10⁻⁹ mol L⁻¹. The apparent Michaelis-Menten constant ( ) was calculated by the amperometric method, and the obtained value was 1.2×10⁻⁵ mol L⁻¹ whose result was similar when compared with other studies previously. The biosensor was applied in river water samples, and the results were very satisfactory, with recoveries near 100 %. In addition, the response of this biosensor for different compounds, taking into account their molecular structures was investigated and the results obtained showed no interference with the response potential of catechol. The electrochemical biosensor developed in this work can be considered highly advantageous because it does not require the use of a mediator (direct detection) for electrochemical response, and also because it is based on a low-cost materials that can be used with success to immobilise other enzymes and/or biomolecules.     

环境试样分析

本文是《分析试验室》的定期评述中“环境试样分析”的第５篇评论。它评论了从１９９４年１月至１９９５年１２月期间我国环境试样分析的进展，包括综述、大气分析、水分析、沉积物分析、生物样品分析和有机污染物分析引用参考文献４９４篇。     

环境试样分析

本文是“分析试验室”定期评述中“环境试样分析”专题的第四篇评述。它叙述了１９９２年１月至１９９３年１２月期间我国有关环境试样分析的研究工作进展。内容包括概述、大气分析、水分析、沉积物分析、生物样品分析及有机物测定。共引用文献６７４篇。     

超高效液相色谱-串联质谱法测定环境样品中溴嘧氯草醚残留及其在土壤中降解特性的研究

建立了超高效液相色谱-串联质谱法(UPLC-MS/MS)测定土壤、沉积物和水中溴嘧氯草醚残留量的方法,研究了溴嘧氯草醚在3种不同类型土壤中的降解特性.样品经乙腈提取后,以C18固相萃取柱净化,采用梯度洗脱程序、BEH C18色谱分离柱、应用UPLC-MS/MS多反应监测模式测定溴嘧氯草醚.对0.005、0.05和2.0 mg/kg添加浓度样品进行回收实验,溴嘧氯草醚在土壤、沉积物和水中的平均回收率为87%~106%,变异系数为2.8%~8.0%.溴嘧氯草醚在0.5~20μg/L浓度范围内相关系数R2>0.9999,溴嘧氯草醚在土壤(沉积物)和水中的定量限分别为0.2μg/kg和0.2μg/L.应用建立的溴嘧氯草醚残留分析方法检测了土壤降解样品,结果表明,溴嘧氯草醚在3种不同土壤中好氧降解的半衰期为1.72~28.2 d,厌氧降解的半衰期为2.93~31.4 d;在同一种土壤样品中,好氧条件下溴嘧氯草醚降解快于厌氧条件;土壤中溴嘧氯草醚降解的快慢与土壤的pH值、阳离子交换量和土壤质地有关.     

LC Analysis of Isepamicin in Plasma Samples Post-Inhalation with Fluorescence Detection and Its Application to a Pharmacokinetic Study

A simple and novel LC method has been developed for determination of isepamicin (ISP) in rat plasma, an aminoglycoside antibiotic agent. After protein precipitation and clean-up procedure to remove lipophilic contaminants, ISP is derivatized by pre-column with 9-fluorenylmethyl chloroformate for fluorescence detection. Chromatographic separations are achieved using a C18 column and mobile phase consisting of water and acetonitrile (68/32, v/v). Amikacin was used as an internal standard. The calibration curve was linear over a concentration range of 0.625–15 μg mL^?1. The limit of quantification was 0.45 μg mL^?1. The intra- and inter-day variabilities of ISP were both less than 5%. Both derivatives were stable for at least a week at ambient condition. This assay procedure should have useful application in therapeutic drug monitoring of ISP. The limit of detection was 0.10 μg mL^?1. The specificity, assay linearity, low level assay linearity and assay repeatability were also investigated. The established method provides a reliable bioanalytical method to carry out isepamicin pharmacokinetics in rat plasma.     

Performance of a Bismuth Bulk Rotating Disk Electrode for Heavy Metal Analysis: Determination of Lead in Environmental Samples

The bismuth bulk electrode is proposed here for the first time in the rotating configuration (BiB‐RDE) as the electrode of choice for voltammetric analysis of selected heavy metal ions. Optimization of chemical and instrumental parameters was carried out to develop a reliable and convenient method for the determination of Zn(II), Cd(II) and Pb(II) by SWASV. Appropriate detection limits were found for environmental monitoring applications in the medium – low µg/L range. The method was validated for Pb(II) determination by certified reference materials. Successful application to the determination of Pb(II) in samples of fortified rainwater and sewage sludge from a steel industry is described.     

Cathodic Electrochemical Detection of Nitrophenols at a Bismuth Film Electrode for Use in Flow Analysis

The bismuth film electrode (BiFE) is presented for use in both batch voltammetric and flow injection (FI) amperometric detection of some nitrophenols (2‐nitrophenol, 2‐NP; 4‐nitrophenol, 4‐NP; 2,4‐dinitrophenol, 2,4‐DNP). The bismuth film was deposited ex situ (batch measurements) and in‐line (FI) onto a glassy carbon substrate electrode. Batch analysis of the nitrophenols was carried out in 0.04 M Britton Robinson (BR) buffer pH 4, while for FI measurements, a carrier/electrolyte solution composed of 0.1 M BR buffer pH 4 mixed with methanol (20+80, v/v%) was employed to resemble media used in preconcentration/clean‐up and flow separation sample pretreatment procedures. Under batch conditions, the voltammetric behavior of the nitrophenols was examined for dependence on medium pH in the range of 2 to 10. Employing the square‐wave voltammetry mode, the limits of detection were 0.4 μg L^?1, 1.4 μg L^?1, and 3.3 μg L^?1 for 2‐NP, 4‐NP, and 2,4‐DNP, respectively. Under flow conditions, a simple in‐line electrochemical bismuth film renewal procedure was tested and shown to provide very good inter‐ and intra‐electrode reproducibility of the current signals at low μg L^?1 analyte concentrations. The limits of detection for 2‐NP, 4‐NP and 2,4‐DNP obtained using FI and amperometric detection at ?1.0 V (vs. Ag/AgCl) were 0.3 μg L^?1, 0.6 μg L^?1 and 0.7 μg L^?1, respectively, with linear ranges extending up to 20 μg L^?1. The attractive performance of the BiFE under flow analysis conditions offers great promise with respect to its detection capability and to its use for a prolonged period of time with no need for inconvenient removal of the electrode from the system for mechanical surface treatment.     

Lab-in-Syringe,a Useful Technique for the Analysis and Detection of Pollutants of Emerging Concern in Environmental and Food Samples

Lab-in-syringe is a new approach for the integration of various analytical extraction steps inside a syringe. Fully automated dispersive liquid–liquid microextraction is carried out in-syringe using a very simple instrumental setup. Dispersion is achieved by aspiration of the organic phase and then the watery phase into the syringe as rapidly as possible. After aggregation of the solvent droplets, the organic phase is pushed towards the detector allowing a highly sensitive spectrophotometric or fluorimetric detection. This technique is very useful not only for the preconcentration of analyte, but also for the elimination of their interferences. In this work, its application is described using solvents that are lighter and denser than water. The magnetically assisted variant and its coupling to different instruments has been also described with the aim of increasing the resolution of complex samples, especially useful for the determination of emerging contaminants.     

罗布泊地区环境样品中的放射性检测

随着核能的开发应用,研究环境中铀、钍、钾等长寿命放射性核素的放射性水平,对保护公众安全和生态环境具有重要意义。采用中子活化分析方法,对罗布泊地区环境样品作了放射性检测。根据该样品的比活度以及该样品的元素丰度与中国大陆地壳元素丰度的比较,表明罗布泊地区的地质放射性无明显的放射性异常,并可以作为建筑材料使用,符合GB6566-2001标准。     

A Chromo-Fluorogenic Naphthoquinolinedione-Based Probe for Dual Detection of Cu2+ and Its Use for Various Water Samples

The presence of an abnormal amount of Cu²⁺ in the human body causes various health issues. In the current study, we synthesized a new naphthoquinolinedione-based probe (probe 1) to monitor Cu²⁺ in different water systems, such as tap water, lakes, and drain water. Two triazole units were introduced into the probe via a click reaction to increase the binding affinity to a metal ion. In day-light, probe 1 dissolved in a mixed solvent system (HEPES: EtOH = 1:4) showed a vivid color change from light greenish-yellow to pink in the presence of only Cu²⁺ among various metal ions. In addition, the green luminescence and fluorescence emission of the probe were effectively bleached out immediately after Cu²⁺ addition. The limit of detection (LOD) of the probe was 0.5 µM when a ratio-metric method was used for metal ion detection. The fluorescence titration data of the probe with Cu²⁺ showed a calculated LOD of 41.5 pM. Hence, probe 1 possesses the following dual response toward Cu²⁺ detection: color change and fluorescence quenching. Probe 1 was also useful for detecting Cu²⁺ spiked in tap/lake water as well as the cytoplasm of live HeLa cells. The current system was investigated using ultraviolet-visible and fluorescence spectroscopy as well as density functional theory calculations (DFT).     

降低聚氯乙烯膜黄连素选择性电极检出限的新方法

PVC药物选择性电极的检出限主要是由膜中活性物质的溶解和内参比溶液中被测离子在膜中的迁移所决定的。为了减少这两种不利因素的影响 ,采用内参比为含可乐定的氯化钠溶液的可乐定选择性电极测定黄连素。测定的线性范围为 1.0× 10 - 4～ 1.0× 10 - 8mol L ,平均斜率为 5 8.6mV decade ;检出下限为 2 .5×10 - 9mol L ,比已报道的检出下限要低 2～ 3个数量级。电极的选择性明显提高 ,选择性系数的测定更加可靠真实 ,并获得良好的重现性和稳定性。以标准加入法测定回收率 ,结果令人满意。     

Application of Capillary Zone Electrophoresis for the Analysis of Low Molecular Weight Organic Acids in Environmental Samples

Abstract

The applicability of a recently developed capillary zone electrophoretic (CZE) method for the determination of low molecular weight (LMW) organic acids in water was tested on five types of environmental samples (rainwater, water extract from peat, and soil water from two polluted sites). A full baseline resolved separation of fourteen commonly found LMW carboxylic acids in natural waters (malonic, oxalic, fumaric, maleic, formic, succinic, tartaric, glutaric, adipic, acetic, propionic, butyric, valeric and citric acids), was achieved within eight minutes. The limits of detection (2 X noise) were in the ranges 90–200 μg/l and 0.5 – 5 μg/l for hydrodynamic and electrokinetic injection, respectively. Two different CZE systems, a Waters Quanta 4000 and a Hewlett Packard HP ^3DCE system, were used and their performance compared.     

Determination of Allura Red and Tartrazine in Food Samples by Sequential Injection Analysis Combined with Voltammetric Detection at Antimony Film Electrode

An antimony film electrode prepared on‐line and installed as part of a sequential injection system, was used as an electrochemical detector to determine azo dyes in food samples. The influence of several flow variables were evaluated using a central composite design. In optimal conditions, the linear range of the calibration curve varied from 1–5 µM, with a limit of detection limit of 0.3 µM. The relative standard deviation of analytical repeatability was <5.0 %.The method was validated by comparing the results obtained with those provided by HPLC; no significant difference were seen.     

生物和环境样品中硒元素的形态分析研究

金属组学是继基因组学/蛋白质组学和代谢组学后提出的一种新的组学,其研究重点在于对所研究的金属和类金属元素的各种存在形态进行分析。硒是生物环境中存在的一种重要的类金属元素。形态与浓度不同的硒化合物可能是生物体的必需元素,同时也可能导致中毒。本文对目前存在的硒元素形态分析方法的研究现状进行了总结,并对前景进行了展望。     

环境样品中壬基酚及相关化合物的分离富集与测定

对近 2 0年来环境样品中壬基酚及其相关化合物分析方法的研究进展进行了综合评述 ,重点讨论了样品前处理方法、柱分离和测定技术     

离子色谱-化学发光法测定环境水样中痕量间苯二酚和间苯三酚

建立了离子色谱分离化学发光法同时检测环境水样中痕量间苯二酚和间苯三酚的方法。利用IonPacAS19阴离子交换分析柱进行分离,以50 mmol/LNaOH作为流动相洗脱待测物质后,再用鲁米诺K₂Fe（CN）₆化学发光体系在碱性介质中对其进行测定。最佳发光条件为:鲁米诺浓度为6.0×10^-4mol/L,K₄Fe（CN）-6浓度为0.1 mol/L,K₃Fe（CN）₆浓度为5.5×10^-5mol/L。本方法分离时不需使用甲醇、乙腈等有机改进剂,环境友好,同时提高了化学发光的强度。采用本方法测定的间苯二酚和间苯三酚线性范围为0.05～1.0 mg/L,检出限（3σ）分别为4.0和4.3μg/L。对0.1 mg/L的间苯二酚和间苯三酚标准溶液进行11次测定,相对标准偏差（RSD）分别为0.9%和1.1%。将本方法应用于实际水样中痕量间苯二酚和间苯三酚的检测,结果满意。