Preliminary shielding analysis for the CSNS target station monolith

The construction of the China Spallation Neutron Source (CSNS) has been initiated at Dongguan,Guangdong,China.In spallation neutron sources the target station monolith is contaminated by a large number of fast neutrons whose energies can be as large as those of the protons of the proton beam directed towards the tungsten target.A detailed radiation transport analysis of the target station monolith is important for the construction of the CSNS.The analysis is performed using the coupled Monte Carlo and multi-dimensional discrete ordinates method.Successful elimination of the primary ray effects via the two-dimensional uncollided flux and first collision source methodology is also illustrated.The dose at the edge of the monolith is calculated.The results demonstrate that the doses received by the hall staff members are below the required standard limit.     

Calculations of radioactivity and afterheat in the components of the CSNS target station

This paper shows the calculations of radioactivity and afterheat in the components of the China Spallation Neutron Source (CSNS) target station, with the Monte Carlo codes LAHET, MCNP4C and the multigroup code CINDER'90. These calculations provide essential data for the detailed design and maintenance of the CSNS target station.     

中国散裂中子源靶站重要部件的辐照损伤计算与分析

本文采用高能粒子输运程序MCNPX 2.5.0,对中国散裂中子源(CSNS)靶站重要部件所使用的钨、SS316不锈钢与Al-6061等材料,由于中子与质子辐照所引起的损伤能量截面与原子离位截面进行了计算,对钨靶体、靶的不锈钢容器、慢化器与反射体的铝容器等部件的辐照损伤量——原子离位次数(displacement per atom,DPA)进行了计算与分析,并给出了质子束斑形状对靶体及靶容器DPA峰值的影响. 这些计算与分析对正在建设的中国散裂中子源靶站的设计及参数选择具有重要的实际意义. 关键词： 中国散裂中子源 损伤能量截面 原子离位截面 DPA     

Physical design of target station and neutron instruments for China Spallation Neutron Source

The China Spallation Neutron Source(CSNS)is the first accelerator-based multidiscipline user facility to produce pulsed neutrons by tungsten target under collision of a pulsed proton beam with a beam power of 100 kW at a repetition rate of 25 Hz.In this paper,we focus on the physical design of CSNS target station and neutron instruments.Under optimized design,the flat tungsten target and the compact target-moderator-reflector coupling enhance effective cold and thermal neutron output from moderators.Three wing-type moderators supply four different characteristics of neutrons to 19 beamlines primarily for neutron scattering applications.Layout of neutron instruments are conceptually planned for total 20 beamlines,the configuration and specification have been determined for three day-one neutron instruments.All designs are optimized for the Phase I of 100 kW with a upgradable capacity to 500 kW.     

Design and analysis of the tunnel connecting the beamcorridor and the spectrum hall of the CSNS

There is a tunnel connecting the beamcorridor and the target station in the spectrum hall in the CSNS project. The length of the tunnel is about 20 m. The shielding design of the tunnel is very significant for the persons working in the spectrum hall because the tunnel is not covered by soil for shielding. In order to reduce the dose rate at the exit of the cable ducts, we use the ISIS construction, which is designed with four turnings, as a reference for the tunnel design. The thickness of the shielding is obtained by a simulation with the Monte Carlo Code FLUKA. The result is compared with the data obtained with Moyer Mode and the reliability of the simulation is proved. This paper provides the basis for the design of the tunnel.     

Proposal for muon and white neutron sources at CSNS

The China Spallation Neutron Source (CSNS) is a large scientific facility with the main purpose of serving multidisciplinary research on material characterization using neutron scattering techniques. The accelerator system is to provide a proton beam of 120 kW with a repetition rate of 25 Hz initially (CSNSⅠ), progressively upgradeable to 240 kW (CSNS-Ⅱ) and 500 kW (CSNS-Ⅱ'). In addition to serving as a driving source for the spallation target, the proton beam can be exploited for serving additional functions both in fundamental and applied research. The expanded scientific application based on pulsed muons and fast neutrons is especially attractive in the overall consideration of CSNS upgrade options. A second target station that houses a muon-generating target and a fast-neutron-generating target in tandem, intercepting and removing a small part of the proton beam for the spallation target, is proposed. The muon and white neutron sources are operated principally in parasitic mode, leaving the main part of the beam directed to the spallation target. However, it is also possible to deliver the proton beam to the second target station in a dedicated mode for some special applications. Within the dual target configuration, the thin muon target placed upstream of the fast-neutron target will consume only about 5% of the beam traversed; the majority of the beam is used for fast-neutron production. A proton beam with a beam power of about 60 kW, an energy of 1.6 GeV and a repetition rate of 12.5 Hz will make the muon source and the white neutron source very attractive to multidisciplinary researchers.     

Preliminary shielding analysis in support of the CSNS target station shutter neutron beam stop design

The construction of China Spallation Neutron Source (CSNS) has been initiated in Dongguan, Guangdong, China. Thus a detailed radiation transport analysis of the shutter neutron beam stop is of vital importance. The analyses are performed using the coupled Monte Carlo and multi-dimensional discrete ordinates method. The target of calculations is to optimize the neutron beamline shielding design to guarantee personal safety and minimize cost. Successful elimination of the primary ray effects via the two-dimensional uncollided flux and the first collision source methodology is also illustrated. Two-dimensional dose distribution is calculated. The dose at the end of the neutron beam line is less than 2.5 μSv/h. The models have ensured that the doses received by the hall staff members are below the standard limit required.     

Development of a ~3He Gas Filling Station at the China Spallation Neutron Source

At the China Spallation Neutron Source(CSNS), we have developed a custom gas-filling station, a glassblowing workshop, and a spin-exchange optical pumping(SEOP) system for producing high-quality ~3He-based neutron spin filter(NSF) cells. The gas-filling station is capable of routinely filling ~3He cells made from GE180 glass of various dimensions, to be used as neutron polarizers and analyzers on beamlines at the CSNS. Performance tests on cells fabricated at our gas-filling station are conducted via neutron transmission and nuclear-magneticresonance measurements, revealing nominal filling pressures, and a saturated ~3He polarization in the region of 80%, with a lifetime of approximately 240 hours. These results demonstrate our ability to produce competitive NSF cells to meet the ever-increasing research needs of the polarized neutron research community.     

Design and analysis of the tunnel connecting the beamcorridor and the spectrum hall of the CSNS

There is a tunnel connecting the beamcorridor and the target station in the spectrum hall in the CSNS project.The length of the tunnel is about 20 m.The shielding design of the tunnel is very significant for the persons working in the spectrum hall because the tunnel is not covered ed soil for shielding.In order to reduce the dose rate at the exit of the cable ducts,we use the ISIS construction,which is designed with four turnings,as a reference for the tunnel design.The thickness of the shielding is obtained by a simulationwith the Monte Carlo Code FLUKA.The result is compared with the data obtained with Moyer Mode and the reliability of the simulation is proved.This paper provides the basis for the design of the tunnel.     

Development of a Spin-Exchange Optical Pumping-Based Polarized ~3He System at the China Spallation Neutron Source(CSNS)

Polarized ~3He neutron spin filters(NSFs) can be used as a vital tool for neutron polarization production and analysis.The China Spallation Neutron Source(CSNS),as one of the major neutron facilities in China,has committed resources to the development of a polarized ~3He NSF program to support its growing polarized neutron research.A spin-exchange optical pumping(SEOP)-based polarized ~3He system and other necessary hardware for NSF transport has been recently developed.The performance of the system is benchmarked using an in-house developed cell named "Trident".Neutron beam measurements yield a ~3 He polarization of 77% with over 200 h of on-beam relaxation time.Combining this newly developed SEOP system with the recently reported cell fabrication station,CSNS is now capable of the fully self-sustained production of ~3He NSFs that shall support its future neutron polarization research.     

Introduction to the overall physics design of CSNS accelerators

The China Spallation Neutron Source (CSNS) is an accelerator-based facility. The accelerator of CSNS consists of a low energy linac, a Rapid Cycling Synchrotron (RCS) and two beam transport lines. The overall physics design of CSNS accelerator is described, including the design principle, the choice of the main parameters and design of each part of accelerators. The key problems of the physics design, such as beam loss and control, are also discussed. The interface between the different parts of accelerator, as well as between accelerator and target, are introduced.     

散裂靶中质子束窗的散射效应

 质子束窗是在高功率靶区中的一个分界窗,它将质子输运线上高真空区域和氦容器中的氦环境分开。在其他散裂中子源中质子束窗的热效应以及机械问题都已经被研究过了,但质子束在该窗中散射效应的研究却很少被报导,然而在靶设计中如果没有处理好质子束窗的散射效应会有很大的问题。报导了质子束窗散射效应的模拟计算结果,包括不同质子束窗的材料和结构选择,并以中国散裂中子源（CSNS）为例,介绍了在CSNS一期和二期中质子束窗采用周边水冷的铝合金单层结构,CSNS三期采用中间水冷的铝合金夹层结构。文中给出了不同结构的质子束窗和不同的与靶距离散射效应对靶上经非线性磁铁均匀化的束流分布的影响的模拟计算结果。模拟结果显示质子窗的散射效应对束流损失和靶上的束流分布有重要的影响。     

环-靶站输运线末端准直器的研究

环-靶站输运线(RTBT)末端的准直器是中国散裂中子源(CSNS)工程中的关键部件之一,因其靠近靶站,辐射剂量大,维护困难,故设计可靠性极为重要。根据准直器的工作原理,及CSNS物理设计要求,对比国外同类加速器的设计经验,设计完成准直器设备。在设计过程中兼顾了热沉积、功率损耗和材料性能等方面的严格要求,并逐一阐述了具体方案。利用Bethe-Bloch公式计算与SRIM软件模拟的结果比较,确定了模拟工具和模拟方法的可靠性,根据ANSYS有限元软件模拟的结果,验证了准直器结构设计的可靠性。     

大俘获立体角的内靶超导螺线管表面muon源的设计研究

高通量μ子源是国际上μ子科学研究的重要条件。在中国散裂中子源的高能质子应用区中,运用蒙特卡罗工具Geant4和G4beamline软件设计了使用内靶超导螺线管俘获高通量表面μ子的束线。与传统的分离靶和基于四极磁铁的收集系统相比,大孔径超导螺线管可以将收集效率提高两个量级。通过对不同靶材的粒子产率进行分析得出石墨是最佳靶材,然后比较俘获螺线管与束流的不同偏转角度下收集的表面μ的产率,提出了合理的较高产率的俘获和输运螺线管的设计方案,并与常规磁铁方案比较,最终在衰变螺线管端口的表面μ通量高达108/s。     

Analysis of displacement damage effects on bipolar transistors irradiated by spallation neutrons

Displacement damage induced by neutron irradiation in China Spallation Neutron Source(CSNS) is studied on bipolar transistors with lateral PNP, substrate PNP, and vertical NPN configurations, respectively. Comparison of the effects on different type transistors is conducted based on displacement damage factor, and the differences are analyzed through minority carrier lifetime calculation and structure analysis. The influence of CSNS neutrons irradiation on the lateral PNP transistors is analyzed by the gate-controlled method, including the oxide charge accumulation, surface recombine velocity,and minority carrier lifetime. The results indicate that the total ionizing dose in CSNS neutron radiation environment is negligible in this study. The displacement damage factors based on 1-MeV equivalent neutron flux of different transistors are consistent between Xi'an pulse reactor(XAPR) and CSNS.     

位敏型探测器数字法读出研究(英文)

中国散裂中子源( CSNS ) 的建造对中子探测器提出了非常高的要求,如更大的有效面积、二维位置灵敏、高计数率、高探测效率和低的 灵敏度等。与传统的模拟读出方法相比,数字法读出具有更高的计数率, 更小的数据传输量,更简单的电子学设计以及更高的信噪比。对数字法读出进行了理论计算,利用GEM探测器的原始数据分析了数字法读出的位置分辨率与读出条宽度的关系。结果表明,数字法读出对于位置分辨要求较低( 小于4 mm) 的大面积位置灵敏探测器是一种较好的选择,如CSNS 小角谱仪探测器。Efficient thermal neutron detectors with large area, two-dimensional position sensitive, high counting rate high detection efficiency and low gamma sensitivity are required to satisfy the demands for the China Spallation Neutron Source (CSNS). Compared with the traditional analog readout method, the digital readout method has the advantages of higher counting rate, smaller quantity of data transmission, simpler readout system and higher signal to noise ratio. The theoretical analysis of the digital readout method is reported in this paper. Used the raw data of GEM detector, the relationship between the position resolution and the width of the readout strip was studied. The results indicate that the digital readout method could be a good choice for the large area position sensitive detector where the requirement of position resolution is less than 4 mm, e.g. the detector of Small-Angle Neutron Scattering (SANS) diffractometer of CSNS.     

Study on space charge effects of the CSNS/RCS

The Rapid Cycling Synchrotron (RCS) is a key component of the China Spallation Neutron Source (CSNS). The space charge effect is one of the most important issues in the CSNS/RCS, which limits the maximum beam intensity, as well as the maximum beam power. Space charge effects are the main source of emittance growth and beam loss in the RCS. Space charge effects have been studied by simulation for the CSNS/RCS. By optimizing the painting orbit, the optimized painting distribution was obtained. The space charge effects during the acceleration are studied and dangerous resonances, which may induce emittance growth and beam loss, are investigated. The results are an important reference for the design and commissioning of the CSNS/RCS.     

散裂中子源高气压二维位置灵敏3He探测器的实验研究

为满足中国散裂中子源多功能反射谱仪中子探测器的基本物理要求:有效面积达到200 mm×200 mm、探测效率大于50%（2Å）、位置分辨好于2 mm等,中国科学院高能物理研究所研制了3He高气压二维多丝正比室位置灵敏中子探测器。该探测器采用二维多丝室结构,腔体内充3He/C₃H₈（6 atm/2.5 atm）的组合气体。本文首先利用Am/Be中子源完成对探测器全面积均匀性测试,均匀性指标达到了95.1%;探测器在中国散裂中子源的20号束流线站安装后,对其进行了在束测量,通过飞行时间选取波长2.8Å的慢中子,测量了探测器二维位置分辨和二维成像性能。在X方向（垂直于阳极丝的方向）的位置分辨为0.99 mm,Y方向（平行于阳极丝的方向）的位置分辨为1.36 mm,探测器具有很好的二维位置分辨和二维成像能力。测量结果表明探测器满足反射谱仪的研制要求。     

中国散裂中子源反角白光中子源T0信号的精确扇出方法

反角白光中子源位于中国散裂中子源(CSNS),是以不同中子能量下的核数据测量为目标的大型物理实验装置,中子的能量是通过中子飞行时间(TOF)来获取的.实验中,将质子束流轰击钨靶的时刻作为TOF的起始时刻(T0),相应的电子学信号被用于触发整个电子学系统的运行.为了保证TOF测量的准确性和电子学系统各通道采集的同步性,需...     

中国散裂中子源在大气中子单粒子效应研究中的应用评估

由于缺少可用的散裂中子源,多年来我国在大气中子单粒子效应方面主要依靠模拟仿真和单能中子试验的方式开展研究.随着中国散裂中子源(CSNS)通过国家验收,基于CSNS开展大气中子单粒子效应研究成为可能.本文利用CSNS反角白光中子源开展多款静态随机存取存储器器件的中子单粒子效应试验,并与早期开展的高原大气试验结果进行对比,对CSNS在大气中子单粒子效应研究中的应用进行评估.结果表明,相同器件在CSNS反角白光中子源测得的单粒子翻转截面小于大气试验的结果,且不同器件的翻转截面与特征尺寸没有明显的单调关系.分析得到前者由于CSNS反角白光中子谱偏软;后者由于特征尺寸降低导致的临界电荷变小和灵敏体积变小对截面的贡献是竞争关系.针对截面偏小的问题,根据能谱差异分析了中子能量阈值对器件翻转截面的影响,发现能量阈值取12MeV进行计算时,器件在CSNS反角白光中子源和高原大气中子环境中能够得到较一致的截面.研究结果表明CSNS反角白光中子源能够用于加速大气中子单粒子效应试验.考虑到CSNS的运行功率正在逐步提高,且多条规划中的白光中子束线与大气中子能谱更为接近,预期未来CSNS将能更好地应用于大气中子单粒子效应研究.