Cisplatin-loaded polymer/magnetite composite nanoparticles as multifunctional therapeutic nanomedicine

Multifunctional nanocarriers with multilayer core-shell architecture were prepared by coating superparamagnetic Fe3O4 nanoparticles with diblock copolymer folate-poly（ethylene glycol）-b-poly（glycerol monomethacrylate） （FA-PEG-b- PGMA）, and triblock copolymer methoxy poly（ethylene glycol）-b-poly（2-（dimethylamino） ethyl methacrylate）-b- poly（glycerol monomethacrylate） （MPEG-b-PDMA-b-PGMA）. The PGMA segment was attached to the surfaces of Fe304 nanoparticles, and the outer PEG shell imparted biocompatibility. In addition, folate was conjugated onto the surfaces of the nanocarriers. Cisplatin was then loaded into the nanocarrier by coordination between the Pt atom in cisplatin and the amine groups in the inner shell of the multilayer architecture. The loaded cisplatin showed pH-responsive release： slower release at pH 7.4 （i.e. mimicking the blood environment） and faster release at more acidic pH （i.e. mimicking endosome/lysosome conditions）. All of the cisplatin-loaded nanoparticles showed concentration-dependent cytotoxicity in HeLa cells. However, the folate-conjugated cisplatin-loaded carriers exhibited higher cytotoxicity in HeLa cells than non-folate conjugated cisplatin-loaded carriers.     

Effect of vegetable oils on obtaining lipid nanocarriers for sea buckthorn extract encapsulation

The principal aim of the present study was to develop new safe and highly antioxidant nanostructured lipid carriers loaded with sea buckthorn extract. Three vegetable oils — grape seed oil, sea buckthorn oil and St. John's wort oil (Hypericum perforatum oil) — were used as matrix components and the modified high shear homogenization technique has been employed for the synthesis of nanostructured materials. The effect of these oils on the antioxidant and antimicrobial activities of loaded sea buckthorn extract — nanostructured lipid carriers — has also been studied. For this purpose, a combination of two solid lipids: cetyl palmitate with glyceryl stearate and lecithin/block copolymer has been used. The obtained nanostructured lipid carriers have been characterized for the particle size and zeta potential by means of dynamic light scattering measurements. The nano-dimension morphology of loaded nanostructured lipid carriers was confirmed by transmission electron microscopy. Their crystallinity measured by differential scanning calorimetry has revealed a high disordered lipid matrix. The properties of sea-buckthorn-extract-loaded nanoparticles have been evaluated by an appropriate in vitro analysis (chemiluminescence method). The presence of the three vegetable oils influences extensively the antioxidant properties of the developed nano-formulations, as has been demonstrated using the chemiluminescence technique. The antimicrobial activity of the studied nanostructured lipid carriers, analyzed by the diffusion disc method, shows in most of the samples a high efficiency against Escherichia coli bacteria.     

Synthesis of an esterase‐sensitive degradable polyester as facile drug carrier for cancer therapy

Polyethylene glycol (PEG) is widely used as a carrier to improve the pharmaceutical properties of drugs with low molecular weight. However, PEG has few functional groups (usually two) for drug conjugation and the resulting low drug content (1–2%) has hampered its clinical applications. For this study, we synthesized biodegradable poly(ethylene glycol‐co‐anhydride). This polyester‐based polymer possesses multiple carboxylic acid groups that can be used as facile drug carriers. Two anticancer drugs, camptothecin (CPT) and doxorubicin (DOX) were loaded into the carrier and their releasing properties and in vitro anticancer activities were studied. The polymer–drug conjugates exhibited esterase‐promoted degradation and drug release. Their cytotoxicity against the human ovarian cancer cell line SKOV‐3 was comparable to unconjugated drugs. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 507–515     

抗癌载药体系Fe_3O_4@ZIF-8@PA的合成及药物释放

采用溶剂热法合成磁性Fe_3O_4纳米粒子,并以此为基底设计制备了一种具有pH响应核壳结构的磁性纳米复合材料Fe_3O_4@ZIF-8@PA.该材料的比饱和磁化强度可达35.46 A·m2/g,具有良好的磁性.Fe_3O_4纳米粒子呈球型结构,分散性良好.与基底相比,复合微球的粒径尺寸明显增大,但依然符合载体材料的理想尺寸且分布均匀.此外,载体具有多孔结构,表面积较大,载药效率和载药量分别高达96.4%和144.6 mg/g.在pH为7.4和5.0的条件下对载药纳米粒子进行了药物释放研究.24 h内,粒子在2种pH下累计释放量分别为39.8%和78.6%.通过药物缓释验证了载体的pH响应性能.在实验中引入了对癌细胞具有杀伤作用的植酸,使合成的载体具有一定的抗癌作用.同时采用四甲基偶氮唑盐(MTT)法对人骨肉瘤细胞(MG-63)进行了体外分析实验,证实材料与抗癌药物阿霉素(DOX)之间存在着一定的协同抗癌效果.     

Hyper-branched multifunctional carbon nanotubes carrier for targeted liver cancer therapy

The systemic toxicity of anticancer drugs regularly restricts the use of conventional chemotherapy to treat cancer. In this study, the limitations overcome by profitably fabricating a multifunctional nanocarrier system to carry the anticancer drug into the specific location of the cancer cells. The polyethylene glycol (PEG) was functionalized in the carboxylated multiwalled carbon nanotubes (MWCNT-COOH) through an esterification reaction (MWCNT-PEG). The targeting ligand of folic acid (FA) was covalently bonded with hyperbranched poly-L-lysine (HBPLL) using adipic acid (AA) as a cross-linking agent. Doxorubicin (DOX), an anticancer drug, was effectively loaded on MWCNT-PEG-AA-HBPLL-FA carrier loading, and in-vitro drug release was investigated by UV–Vis spectrophotometer. The chemical functionalization, morphological properties, crystalline nature, surface charge, and thermal stability of the synthesized materials were studied by FT-IR, FE-SEM, HR-TEM, DLS, and TGA techniques. In-vitro cytotoxicity and anticancer properties of DOX-loaded nanocarrier were studied in human liver cancer (HepG2) cells and human embryonic kidney (HEK293) cells. The activities of caspases (caspase ?3, ?8 & ?9) were analyzed using luminometry. The intrinsic apoptosis pathway proteins (Bcl-2 & BAX) were determined by western blot and RT-PCR analysis. The synthesized DOX-loaded nanocarriers exhibited increased cytotoxicity and apoptosis in liver HepG2 cells. The results suggest that the DOX-loaded nanocarrier possesses strong anticancer properties and could be an applicable and potential drug carrier for liver cancer chemotherapy.     

Temperature- and pH-sensitive interpenetrating polymer networks grafted on PP: Cross-linking irradiation dose as a critical variable for the performance as vancomycin-eluting systems

This work focuses on the effect of gamma-ray radiation conditions on the stimuli-responsiveness and drug-eluting performance of polypropylene (PP) substrates grafted with interpenetrating networks of N-isopropylacrylamide (NIPAAm) and acrylic acid (AAc). PNIPAAm was cross-linked applying 10–100 kGy doses in the presence and absence of the chemical cross-linker N,N′-methylenebisacrylamide (MBAAm). Then, the net-PP-g-PNIPAAm was interpenetrated with PAAc synthesized under a 2.5 kGy dose to obtain net-PP-g-PNIPAAm-inter-net-PAAc films. The amount of grafted PNIPAAm (80%, 125% and 145% levels) and the cross-linking radiation dose (10, 40 and 70 kGy levels) strongly determine the interpenetration of PAAc, the swelling degree, the amount of vancomycin loaded and its release rate. The chemical cross-linker only caused a minor decrease in the degree of swelling. The higher the PNIPAAm grafted on PP and the lower the cross-linking radiation dose, the more the PAAc in the IPN and, consequently, the higher the vancomycin loaded through specific interactions and the more sustained the release (>8 h). The films possessing these features exhibited vancomycin release rate per surface unit suitable to prevent bacterial growth. Thus, adequate tuning of the radiation doses during grafting and cross-linking of the PNIPAAm networks may enable to achieve surface-modified materials for medical devices with an antibiofilm performance.     

Encapsulation and release of biomolecules from Ca-P/PHBV nanocomposite microspheres and three-dimensional scaffolds fabricated by selective laser sintering

This study focused on the fabrication of calcium phosphate (Ca-P)/poly(hydroxybutyrate-co-hydroxyvalerate) (PHBV) nanocomposite scaffolds loaded with biomolecules using the selective laser sintering (SLS) technique and their evaluation. Ca-P/PHBV nanocomposite microspheres loaded with bovine serum albumin (BSA) as the model protein were fabricated using the double emulsion solvent evaporation method. The encapsulation efficiency of BSA in PHBV polymer microspheres and Ca-P/PHBV nanocomposite microspheres were 18.06 ± 0.86% and 24.51 ± 0.60%, respectively. The BSA loaded Ca-P/PHBV nanocomposite microspheres were successfully produced into three-dimensional porous scaffolds with good dimensional accuracy using the SLS technique. The nanocomposite microspheres served as protective carriers and maintained the bioactivity of BSA during SLS. The effects of SLS parameters such as laser power and scan spacing on the encapsulation efficiency of BSA in the scaffolds and in vitro BSA release were studied. An initial burst release was observed, which was followed by a slow release of BSA. After 28-day release, The PHBV matrix was slightly degraded after 28-day in vitro release study. It was shown that nanocomposite scaffolds with controlled architecture obtained via SLS could be incorporated with biomolecules, enhancing them with more functions for bone tissue engineering application or making them suitable for localized delivery of therapeutics.     

Calcium Phosphate Nanocarriers Dual‐Loaded with Bovine Serum Albumin and Ibuprofen: Facile Synthesis,Sequential Drug Loading and Sustained Drug Release

A simple and green strategy is reported for the preparation, drug loading, and release properties of a drug delivery system consisting of calcium phosphate (CP) nanocarriers dual‐loaded with bovine serum albumin (BSA) and hydrophobic drug ibuprofen (IBU). The sequential loading of BSA and IBU in calcium phosphate nanocarriers and in vitro simultaneous release of BSA and IBU are realized and investigated. In this method, BSA, which is used as a model protein drug, is encapsulated in situ in calcium phosphate nanocarriers. Subsequently, the typical hydrophobic drug IBU is loaded in the BSA/CP drug delivery system, forming the IBU/BSA/CP dual drug delivery system. The experiments reveal that the preloaded BSA not only reduces the cytotoxicity of calcium phosphate nanocarriers but also significantly improves the IBU drug loading capacity in calcium phosphate nanocarriers and greatly extends the duration of drug release. Thus, the as‐prepared IBU/BSA/CP dual drug delivery system is promising for drug delivery applications.     

Preparation and characterization of a novel magnetized nanosphere as a carrier system for drug delivery using Plantago ovata Forssk. hydrogel combined with mefenamic acid as the drug model

The aim of the present study was to magnetize Plantago ovata Forssk. hydrogel and produce a nanosphere system to carrier mefenamic acid as the drug model. For this propose, P. ovata seeds hydrogel (POSH) was extracted and magnetized by Fe₃O₄ being functionalized using tetraethyl orthosilicate and trimethoxyvinysilane. Thereafter, mefenamic acid (MFA) was loaded on the carrier system. The final product, as the magnetic drug loaded nanosphere (Fe/POSH/MFA), was fully characterized through different techniques involving X-ray diffraction (XRD), scanning electron microscopy (SEM), vibrating-sample magnetometer (VSM), thermal gravimetric analysis (TGA), dynamic light scattering (DLS), and FT-IR spectroscopy. The results confirmed the successful production of the drug loaded nanosphere system with particles magnetization of 25 emu/g over a range size of 40–50 nm. However, the size distribution less than 100 nm was measured through DLS analysis. The hydrogel showed a pH sensitivity swelling behavior representing the best efficacy at pH 7.4. The efficiency of the drug encapsulation was found to be 64.35%. The drug releasing was studied using a dialysis bag at pH = 7.4. The highest in vitro drug releasing was found to be 57.3 ± 0.6% after 72 h, as well. The findings of the current report account for the potential use of P. ovata hydrogel as an effective delivery system for encapsulation of water insoluble basic drugs, e.g., MFA in a magnetized carrier system.     

Chitosan-Linseed mucilage polyelectrolyte complex nanoparticles of Methotrexate: In vitro cytotoxic efficacy and toxicological studies

The goal of this research was to develop, fabricate and analyze polymeric nanoparticles for the administration of methotrexate (MTX). Linseed mucilage and chitosan nanoparticles (NPs) were prepared using a slightly modified polyelectrolyte complex (PEC) method. The size, shape, and encapsulation effectiveness of the resultant nanoparticles were measured. MTX release profiles at gastrointestinal pH (1.2 and 7.4) and tumor pH (5.5) were examined to determine the targeted potential of NPs as pH-responsive nanocarriers. Zeta analysis showed that nanoparticles prepared by PEC have a size range of 192.1 nm to 246 nm, and PDI was 0.3 of the optimized formulation, which showed homogenous nature of prepared nanoparticles formulation. The findings demonstrated that NPs have a low polydispersity index and a positive zeta potential (PDI). The in-vitro release of the drug indicated a pH-dependent, sustained drug release up to 24 h. Blank LSMCSNPs had almost no in-vivo cytotoxicity for 14 days, while optimum MTX loaded NPs had strong antitumor effects on HepG2 and MCF-7 cells as measured by the MTT assay. Cell apoptosis induction was also checked and MCF-7 cells treated with MTX-LSMCSNPs had a significantly greater rate of apoptosis (21.2 %) than those treated with MTX alone (14.14 %). The findings show that LSMCSNPs could be a potential delivery mechanism for methotrexate to cancer cells in a secure, steady, and ideally controlled manner to improve therapeutic outcomes.     

Construction of AIEgen functionalized nanomicelles and their stability study through ‘seesaw-like’ fluorescence changes

As nanocarriers, nanomicelles play vital roles in the toolbox of drug delivery. The stability of nanomicelles affects the nanomedicines’ bioactivity. Therefore, it is important to understand the stability of nanomicelles for further improvements. Here, we report a strategy to construct new nanomicelles (NM) by introducing aggregation-induced emission (AIE) functional group tetraphenylethylene (TPE) in the component polymer vitamin E (d-α-tocopheryl polyethylene glycol 1000 succinate) (TPGS). The stability of doxorubicin (DOX) loaded nanomicelles DOX@NM in different conditions was studied by fluorescence analysis. The fluorescence changes of DOX@NM are ‘seesaw-like’ when they transform between assembled and disassembled forms. In the assembled form, TPE gives emission from AIE effect, while in the disassembled form, the fluorescence of DOX is observed due to the disappearance of ACQ effect.     

Chitinase inhibits growth of human breast and colorectal cancer cells in vitro and Ehrlich ascites carcinoma cells in vivo

Trichosanthes dioica seed extract was loaded on a QA-cellulose column and the unbound fraction with the chitinase activity was run on SDS-PAGE. Multiple bands were observed and were separated by a Sephadex G-50 column. The combination of the 6 and 33 kDa masses supported the degradation of chitinase as purified earlier. Only the 33 kDa fraction contained sugar and showed chitinase activity. The chitinase was also isolated by using a chitin column. At 200 µg/ml protein concentration, the chitinase inhibited 49.1 %, 48.8 % and 38.12 % of Ehrlich ascites carcinoma, HCT-116 and MCF-7 cells growth, respectively, in a dose-dependent manner. Exactly, 46 % and 82 % EAC cell growth inhibition were observed after treating the EAC cells bearing Swiss albino mice with the chitinase at the doses of 1.0 and 2.0 mg/Kg/day respectively. EAC, HCT-116 and MCF-7 cells growth inhibitions were due to the induction of apoptosis. ROS was accumulated in HCT-116 and MCF-7 cells. After treatment of HCT-116 cells, the expression level of p53 and TNFα genes increased and PARP gene decreased. On the other hand, elevated expression was observed for PARP, MAPK, NFκB, FAS, FADD, and Caspase-8 genes in MCF-7 cells. The induction of apoptosis in HCT-116 was further confirmed by caspase protein expression. The chitinase causes ‘S’ cell cycle arrest in MCF-7 and HCT-116 cells. T. dioica seed chitinase inhibited EAC, HCT-116 and MCF-7 cells by inducing apoptosis in vitro and EAC in vivo in mice. These promising results indicated that T. dioica seed chitinase can be an anticancer agent.     

Synthesis of multiresponsive β‐cyclodextrin nanocomposite through surface RAFT polymerization for controlled drug delivery

In this study, a unique magnetic, pH, and thermo‐responsive hydrogel nanocomposite was synthesized via surface reversible addition fragmentation chain transfer (RAFT) copolymerization of acrylic acid (AA) and N‐isopropyl acrylamide (NIPAM) in the presence of magnetic β‐cyclodextrin (β‐CD). The nanocomposite demonstrated a pH‐responsiveness behavior at pHs 3 and 9. Moreover, swelling behaviors of nanocomposite were measured in solutions with various temperatures. Furthermore, the nanocomposites exhibited high swelling capacity by applying an external magnetic field because of the presence of Fe₃O₄ nanoparticles in the polymer structure. Besides, the doxorubicin (DOX) loading and releasing behaviors of the hydrogel nanocomposites were studied because of the stimuli‐responsive properties of the synthesized carriers. The adsorption of DOX obeyed a pseudo‐second‐order model and fitted well to the Langmuir isotherm model with the maximum adsorption capacity uptake of 291 mg g^?1. In conclusion, the hydrogel nanocomposites were found to be as potential nanocarriers for use in controlled release applications.     

Ultrasound-Triggered Delivery of Iproplatin from Microbubble-Conjugated Liposomes

The Pt^IV prodrug iproplatin has been actively loaded into liposomes using a calcium acetate gradient, achieving a 3-fold enhancement in drug concentration compared to passive loading strategies. A strain-promoted cycloaddition reaction (azide- dibenzocyclooctyne) was used to attach iproplatin-loaded liposomes L(Pt) to gas-filled microbubbles (M), forming an ultrasound-responsive drug delivery vehicle [M−L(Pt)]. Ultrasound-triggered release of iproplatin from the microbubble-liposome construct was evaluated in cellulo. Breast cancer (MCF-7) cells treated with both free iproplatin and iproplatin-loaded liposome−microbubbles [M−L(Pt)] demonstrated an increase in platinum concentration when exposed to ultrasound. No appreciable platinum uptake was observed in MCF-7 cells following treatment with L(Pt) only or L(Pt)+ultrasound, suggesting that microbubble-mediated ultrasonic release of platinum-based drugs from liposomal carriers enables greater control over drug delivery.     

Preparation and characteristics of nanostructured lipid carriers for control-releasing progesterone by melt-emulsification

Nanostructured lipid carriers (NLC) made from mixtures of solid and spatially incompatible liquid lipids were prepared by melt-emulsification. Their drug loading capacity and releasing properties of progesterone were compared with those of solid lipid nanoparticles (SLN), and the NLC prepared by solvent diffusion method. Monostearin (MS) and stearic acid (SA) were used as solid lipid, whilst the oleic acid (OA) was used as liquid lipid. Properties of carriers such as the particle size and its distribution, drug loading, drug encapsulation efficiency and drug release behavior were investigated. As a result, the drug encapsulation efficiencies were improved by adding the liquid lipid into the solid lipid of nanoparticles. The drug release behavior could be adjusted by the addition of liquid lipid, and the NLC with higher OA content showed the faster rate of drug releasing. NLC had higher efficiency of encapsulation and slower rate of drug release than those of NLC prepared by solvent diffusion method. On the other hand, the NLC with higher drug loading was obtained, though the drug encapsulation efficiency was decreased slightly due to the increase of the amount of drug. The NLC modified with polyethylene glycol (PEG) was also prepared by using polyethylene glycol monostearate (PEG-SA). It was observed that the incorporation of PEG-SA reduced the drug encapsulation efficiency, but increased the rate of drug release. A sample with almost complete drug release in 24 h was obtained by modifying with 1.30 mol% PEG-SA. It indicated that the modified NLC was a potential drug delivery system for oral administration.     

Influence of basil oil extract on the antioxidant and antifungal activities of nanostructured carriers loaded with nystatin

The combination of basil oil, natural antifungal, and nystatin has the potential to prevent the extension of topical fungal infections towards systemic infections. The aim of this study was to develop formulations based on basil oil and nystatin with the desired antifungal and antioxidant activity and low toxicity by using lipid nanocarriers. The synthesized nanocarriers showed spherical and homogeneous particles with main diameters less than 150 nm, as determined by TEM. The scanning calorimetric study revealed an imperfect crystallization in the core of lipid nanocarriers. Quantitative results suggested that basil oil concentration affects encapsulation efficiency. The prepared nanocarriers guaranteed an increased nystatin encapsulation by using 3% basil oil content. Chemiluminescence assay proved that the protective activity against oxygen free radicals was influenced by nystatin concentration. The in vitro antifungal studies revealed a better activity of the nanocarriers loaded with 1% nystatin in comparison with 0.5% loading.     

NIR-triggered drug delivery system based on phospholipid coated ordered mesoporous carbon for synergistic chemo-photothermal therapy of cancer cells

Chemo-photothermal treatment is one of the most efficient strategies for cancer therapy. However, traditional drug carriers without near-infrared absorption capacity need to be loaded with materials behaving photothermal properties, as it results in complicated synthesis process, inefficient photothermal effects and hindered NIR-mediated drug release. Herein we report a facile synthesis of a polyethylene glycol (PEG) linked liposome (PEG-liposomes) coated doxorubicin (DOX)-loaded ordered mesoporous carbon (OMC) nanocomponents (PEG-LIP@OMC/DOX) by simply sonicating DOX and OMC in PEG-liposomes suspensions. The as-obtained PEG-LIP@OMC/DOX exhibits a nanoscale size (600±15 nm), a negative surface potential (-36.70 mV), high drug loading (131.590 mg/g OMC), and excellent photothermal properties. The PEG-LIP@OMC/DOX can deliver loaded DOX to human MCF-7 breast cancer cells (MCF-7) and the cell toxicity viability shows that DOX unloaded PEG-LIP@OMC has no cytotoxicity, confirming the PEG-LIP@OMC itself has excellent biocompatibility. The NIR-triggered release studies demonstrate that this NIR-responsive drug delivery system enables on-demand drug release. Furthermore, cell viability results using human MCF-7 cells demonstrated that the combination of NIR-based hyperthermal therapy and triggered chemotherapy can provide higher therapeutic efficacy than respective monotherapies. With these excellent features, we believe that this phospholipid coating based multifunctional delivery system strategy should promote the application of OMC in nanomedical applications.     

NIR-triggered drug delivery system based on phospholipid coated ordered mesoporous carbon for synergistic chemo-photothermal therapy of cancer cells

Chemo-photothermal treatment is one of the most efficient strategies for cancer therapy. However, traditional drug carriers without near-infrared absorption capacity need to be loaded with materials behaving photothermal properties, as it results in complicated synthesis process, inefficient photothermal effects and hindered NIR-mediated drug release. Herein we report a facile synthesis of a polyethylene glycol (PEG) linked liposome (PEG-liposomes) coated doxorubicin (DOX)-loaded ordered mesoporous carbon (OMC) nanocomponents (PEG-LIP@OMC/DOX) by simply sonicating DOX and OMC in PEG-liposomes suspensions. The as-obtained PEG-LIP@OMC/DOX exhibits a nanoscale size (600 ± 15 nm), a negative surface potential (−36.70 mV), high drug loading (131.590 mg/g OMC), and excellent photothermal properties. The PEG-LIP@OMC/DOX can deliver loaded DOX to human MCF-7 breast cancer cells (MCF-7) and the cell toxicity viability shows that DOX unloaded PEG-LIP@OMC has no cytotoxicity, confirming the PEG-LIP@OMC itself has excellent biocompatibility. The NIR-triggered release studies demonstrate that this NIR-responsive drug delivery system enables on-demand drug release. Furthermore, cell viability results using human MCF-7 cells demonstrated that the combination of NIR-based hyperthermal therapy and triggered chemotherapy can provide higher therapeutic efficacy than respective monotherapies. With these excellent features, we believe that this phospholipid coating based multifunctional delivery system strategy should promote the application of OMC in nanomedical applications.     

Chitosan-polyvinyl alcohol membranes with improved antibacterial properties contained Calotropis procera extract as a robust wound healing agent

Due to excessive use of antibiotics, resistance against microorganisms is developed. An alternative use of antibiotics, natural remedies from plants have been used against infectious diseases. In the current study, bioactive compounds from Calotropis procera (C. procera) root were extracted and chitosan and polyvinyl alcohol (CS-PVA) were used asa carriers and for the delivery to treat induced infection. Different concentration of C. procera extracts (25–75 mg/mL) were loaded on CS-PVA membrane and applied on the induced wounds in rabbits. Wound reduction was recorded for 12 days. On 6th day, small tissue from healing area were collected and subject to histopathology for tissue regeneration. The antioxidant activity (DPPH, TPC and TFC) was also investigated of CS-PVA loaded C. procera root extract. The DPPH free radical inhibition for 75 mg/mL were recorded up to 66.37%. The TPC and TFC contents were recorded to be 36.52 ± 5.12 GAE mg/g of DW (dry weight) and 24.49 ± 6.27 CE mg/g of DW (dry weight), respectively. The antibacterial activity was evaluated against Escherichia coli and Staphylococcus aureus in comparison to control (Rifampicin). The zones of inhibition were recorded to be 18.50 ± 2.30 and 20.40 ± 4.20, respectively for CS-PVA membrane loaded with 75 mg extracts along with Rifampicin 28.50 ± 2.5 and 30.50 ± 1.38. The CS-PVA membranes were also studied for swelling and biodegradability. The biodegradability was increased, while swelling was decreased of CS-PVA membranes loaded with extract. The bioactive compounds from the CS-PVA loaded with extract released in controlled and sustainable way. Result revealed that CS-PVA loaded C. procera root extract has promising antimicrobial and antioxidant activity and could possibly be employed for the treatment of infectious diseases.     

Magnetically polymeric nanocarriers for targeting delivery of curcumin and hyperthermia treatments toward cancer cells

Magnetically polymeric nanocarriers, Cur‐FA‐SAMN, were designed and synthesized for targeting, therapeutic treatments to cancer cells. Amine‐group immobilized iron oxides, Fe₃O₄‐NH₂, were attached on the surface of self‐assembled tri‐block copolymer, poly[(acrylic acid)‐block‐(N‐isopropylacrylamide)‐block‐(acrylic acid)] synthesized via reversible addition‐fragmentation chain‐transfer polymerization. For the purpose of targeting effect, folic acid was grafted on the surface of Fe₃O₄‐NH₂ attached nanoparticles. The nanocarriers were characterized by transmission electron microscopy, Fourier transform infrared spectroscopy, vibrating sample magnetometer, and UV‐Vis spectral analysis. Therefore, a hydrophobic anti‐cancer drug, curcumin, gained water dispersity, and stable storage via encapsulating into and on the magnetically polymeric nanocarriers, and the release behaviors were studied in vitro, with and without high frequency magnetic field. Biocompatibility and cytotoxicity of inherent and curcumin‐loaded nanocarriers were investigated by MTT assay. Results displayed that our nanocarriers have no cytotoxicity while curcumin‐loaded nanocarriers offered significant death to MCF‐7, human breast camcer cells. Intracellular‐uptake experiments demonstrated tremendous uptake and the destroying effect to MCF‐7 cells, most of the cancer cells were killed and the surviving ones were surrounded by the curcumin‐loaded nanocarriers. According to the aforementioned characteristics, these magnetically polymeric nanocarriers will be able to apply as a potential device for practical therapy. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2706–2713