3-氨磺酰苯甲酸类AKR1C3抑制剂的3D-QSAR和分子对接研究

醛酮还原酶1C3(AKR1C3)作为治疗前列腺癌的新靶点已成为研究热点,3-氨磺酰苯甲酸衍生物对其具有高效的选择性和抑制活性。本文采用比较分子场分析(COMFA)和比较分子相似性指数分析(COMSIA)方法,将经分子对接后的34个优势构象组成训练集和11个优势构象组成测试集,构建三维定量构效关系(3D-QSAR)模型。COMFA模型的交叉验证系数(q2),非交叉验证系数(R2),标准偏差(SEE)和F值分别为0.761,0.973,0.122,185.963;自举法回归系数为R2bs=0.98。最佳组合COMSIA模型的q2,R2,SEE,F和R2bs分别为0.734,0.984,0.097,147.850,0.994。COMFA和COMSIA模型的系统外部测试R2pred分别为0.864和0.756,r2m分别为0.8127和0.5377。这些结果表明,所建立的QSAR模型具有较高的可靠性和较强预测能力。经三维等势图分析可知,在2、5或6位适当增加取代基体积,或在5位引入氢键受体,或在7位引入负电性取代基则能提高化合物的生物活性。该模型为进一步设计具有更优选择性和活性的化合物提供了理论依据。     

电拓扑状态预测多氯二苯并噻吩及噻吩砜化合物的气相色谱保留指数

以原子类型电拓扑状态指数(ETSI)有效表征了135 个多氯二苯并噻吩(PCDT)和135 个多氯二苯并噻吩砜(PCDTO₂)的分子结构, 应用基于预测的变量选择与模型化(VSMP)方法建立PCDT 和PCDTO₂ 化合物在DB-5 气相色谱柱上的气相色谱保留指数(RI)与分子结构(ETSI)的定量相关模型, 模型的相关系数r² 分别为0.9939 和0.9729, LOO 交叉验证相关系数 q² 分别为0.9921 和0.9692. 为验证模型稳定性和预测能力, 应用17 个PCDT 和PCDTO₂ 训练集样本构建的QSRR 模型的r² 分别为0.9959 和0.9783, LOO 交叉验证相关系数 q² 分别为0.9921 和0.9740, 说明模型具有良好的稳定性. 以此模型预测外部8 个检验集及110 个预测集的RI 值, 8 个检验集样本的结果表明训练集模型具有良好预测能力.     

基于分子边邻接指数的多氯代二苯并呋喃光解半衰期QSPR研究

收集了42种多氯代二苯并呋喃的光解半衰期的实验值，并随机将样本分为训练集和测试集，训练集和测试集的样本数分别是32和10个。采用Gaussian-16软件中半经验PM6方法对PCDFs分子进行几何优化和频率分析。将稳定分子的几何参数交给Alvadsec软件计算其分子边邻接指数。采用多元线性回归（MLR）方法找到四个分子边邻接指数对PCDFs分子的光解半衰期值有显着影响。相关系数达到0.9456,Fisher值为56.97,1相似文献   

苯并咪唑类缓蚀剂的HQSAR研究及分子设计

采用分子全息定量构效关系(HQSAR)方法, 构建苯并咪唑衍生物在酸性环境中的缓蚀性能与结构之间的定量构效关系模型, 研究不同碎片区分参数及碎片大小对模型质量的影响, 寻找最优HQSAR模型, 并对其稳定性及预测能力进行评价. 结果显示: 选取碎片区分参数为原子类型(A)、化学键类型(B)、连接性(C)、氢原子(H)、手性(Ch)、氢键给体和受体(D&;A), 碎片大小为1-3 建模时, 得到的HQSAR 模型(r²(非交叉验证系数)=0.996, q²(交叉验证系数)=0.960, SE_cv(交叉验证标准误差)=3.709)具有良好的统计学稳定性及预测能力. 根据最优HQSAR模型图设计出的38种苯并咪唑类化合物理论上均具有较好的缓蚀性能. 本研究为油气田新型高效缓蚀剂研发提供可靠的理论依据.     

白酒基酒中酮类物质的近红外光谱检测方法

应用近红外光谱技术建立了白酒基酒中2,3-丁二酮和3-羟基-2-丁酮的快速检测模型。从洛阳杜康酒厂选取182个白酒基酒样品为材料,运用气相色谱法测得两种物质的化学值,同时采集其在12 000~4 000 cm-1范围内的光谱数据,采用偏最小二乘法(PLS)结合内部交叉验证建立校正模型。通过对比不同光谱预处理下PLS模型效果对其进行优化,确定2,3-丁二酮和3-羟基-2 丁酮的最佳预处理方法分别为一阶导数+多元散射校正和二阶导数,最佳光谱区间分别为9 403.2~7 497.9 cm-1和9 403.2~7 497.9 cm-1+6 101.7~5 449.8 cm-1。优化后2,3-丁二酮和3 羟基-2-丁酮校正集样品的化学值和近红外预测值的决定系数(R2)分别为0.960 2和0.963 2,交叉验证均方根误差(RMSECV)分别为0.39、0.22 mg/100 mL;通过外部检验,验证集样品的R2分别为0.957 6和0.957 8,预测均方根误差(RMSEP)分别为0.40、0.24 mg/100 mL。结果表明,应用近红外光谱技术结合化学计量学方法所建立的模型有较高的准确度,能够满足白酒生产中酮类物质的快速检测需要。     

5,6-二氢-(9H)-吡唑[3,4-c]-1,2,4-三唑[4,3-a]吡啶类抑制剂的HQSAR研究

应用分子全息定量构效关系(HQSAR)分析方法,以5,6-二氢-(9H)-吡唑[3,4-c]-1,2,4-三唑[4,3-a]吡啶类抑制剂为研究对象,建立了一组对磷酸二酯酶4有抑制活性的化合物HQSAR模型,分析化合物活性与分子结构之间的关系.探讨了分子全息长度、分子碎片大小以及碎片区分参数对模型质量的影响.最优模型的交叉验证相关系数q2=0.628,非交叉验证相关系数r2=0.930,标准偏差SE=0.277.该模型具有较好的预测能力,对该类化合物性质的预测及进一步合成工作有指导意义.     

5-羧基苯并咪唑类HCV NS5B聚合酶抑制剂的HQSAR研究及分子设计

利用分子全息技术研究了129个5-羧基苯并咪唑类HCV NS5B聚合酶抑制剂的结构与活性之间的关系.讨论了分子碎片大小、碎片区分参数及全息长度对模型质量的影响.利用偏最小二乘法(partial least square,PLS)建立了一组以99个化合物为训练集的最优模型,该模型的交叉验证相关系数q~2=0.820,非交叉验证相关系数r~2=0.963,标准偏差SEE=0.213;用最优模型对由30个化合物组成的测试集进行预测,得到其相关系数r_(pred)~2=0.98,表明了该模型具有良好的预测能力及拟合能力.利用色码图对模型中不同原子及不同结构的贡献进行了解释,在此基础上根据最优HQSAR模型设计了几种具有良好抗HCV活性的苯并咪唑类HCV NS5B聚合酶抑制剂分子,为新型HCV NS5B聚合酶抑制剂的设计和优化提供了参考.     

基于5-芳基乙内酰脲类化合物的CoMFA和HQSAR研究

用CoMFA和HQSAR两种QSAR方法研究了50个乙内酰脲类分子的定量构效关系.本研究从构象搜索所得的低能结构出发构建化合物分子的构象, 建立CoMFA模型,并进行了全空间搜索. HQSAR本质上是一种二维的QSAR方法,与CoMFA方法相比,该方法在数据处理方面,比CoMFA方法快捷,并且可重复性好.两种方法均得到了较好分析结果, CoMFA的交叉验证相关系数q2 值为0.815, HQSAR的q2值为0.893.这些方程有力地说明了该类分子在(R,R)-N-3,5-dinitrobenzoyl-1,2-diamine型手性固定相上拆分过程中的影响因素,对今后类似拆分的实验研究提供了理论支持.     

培氟沙星均三唑硫醚衍生物抗肝癌活性的CoMFA模型与分子设计

基于比较分子力场分析(CoMFA)方法建立24种培氟沙星均三唑硫醚衍生物抗肝癌活性(pM)的三维定量构效关系(3D-QSAR)。训练集中20个化合物用于建立预测模型,测试集10个化合物(含模板分子及新设计的5个分子)作为模型验证。所建立的3D-QSAR模型的交叉验证系数(R_cv²)、非交叉验证系数(R²)分别为0.705、0.940,说明模型具有较强的稳定性和良好的预测能力。该模型中立体场、静电场贡献率依次为74.8%、25.2%,表明影响抗肝癌活性(pM)的主要因素是取代基的疏水性和空间契合,其次是库仑力、氢键及配位。基于三维等势图,设计了5个具有较高抗肝癌活性的分子,有待医学实验验证。     

硝基芳烃类含能材料撞击钝度的比较分子力场分析

基于比较分子力场分析(CoMFA)方法建立34种硝基芳烃类炸药分子的结构与撞击钝度(DH)的三维定量构效关系(3D-QSAR)。训练集中28个化合物用于建立预测模型,测试集6个化合物作为模型验证。已建立的CoMFA模型的交叉验证系数(Q~2)、非交叉验证系数(R~2)分别为0.432、0.923,说明所建模型具有较强的稳定性和良好的预测能力。该模型中立体场、静电场贡献率依次为37.9%、62.1%,表明影响撞击钝度DH的主要因素是取代基的电荷分布,其次是取代基的空间位阻。所建模型可用于指导该类化合物的设计。     

醛酮化合物色谱保留指数的集成全息定量构效关系模型

色谱保留指数(retention index,RI)是色谱分析中的重要参数,不同化合物在不同极性固定相上具有不同的保留行为.醛酮化合物种类众多,实验测定其RI值的时间和经济成本高.该论文采用集成建模(ensemble modeling)结合全息定量构效关系(HQSAR)方法研究了醛酮化合物在2种固定相(DB-210和H...     

Predicting toxicity of benzene derivatives by molecular hologram derived quantitative structure-activity relationships (QSARS)

Holographic quantitative structure-activity relationship (HQSAR) is an emerging QSAR technique with the combined application of molecular hologram, which encodes the frequency of occurrence of various molecular fragment types, and the subsequent partial least squares (PLS) regression analysis. Based on molecular hologram, alignment-free QSAR models could be rapidly and easily developed with highly statistical significance and predictive ability. In this paper, the toxicity data for a series of 83 benzene derivatives to the autotrophic Chlorella vulgaris (IGC50, negative logarithmic form of 6-h 50% population growth inhibition concentration in mmol/l) were subjected to HQSAR analysis and this resulted in a model with a high predictive ability. The robustness and predictive ability of the model were validated by "leave-one-out" (LOO) cross-validation procedure and an external testing set. The influence of fragment distinction parameters and fragment size on the quality of the HQSAR model have been also discussed.     

Predicting toxicity of benzene derivatives by molecular hologram derived quantitative structure–activity relationships (QSARS)

Holographic quantitative structure–activity relationship (HQSAR) is an emerging QSAR technique with the combined application of molecular hologram, which encodes the frequency of occurrence of various molecular fragment types, and the subsequent partial least squares (PLS) regression analysis. Based on molecular hologram, alignment-free QSAR models could be rapidly and easily developed with highly statistical significance and predictive ability. In this paper, the toxicity data for a series of 83 benzene derivatives to the autotrophic Chlorella vulgaris (IGC⁵⁰, negative logarithmic form of 6-h 50% population growth inhibition concentration in mmol/l) were subjected to HQSAR analysis and this resulted in a model with a high predictive ability. The robustness and predictive ability of the model were validated by “leave-one-out” (LOO) cross-validation procedure and an external testing set. The influence of fragment distinction parameters and fragment size on the quality of the HQSAR model have been also discussed.     

A comparative study of quantitative structure-activity relationship methods based on gallic acid derivatives

By using hologram quantitative structure-activity relationship (HQSAR) and comparative molecular field analysis (CoMFA) methods, the relationships between the structures of 49 gallic acid derivatives and their analgesic activity have been investigated to yield statistically reliable models with considerable predictive power. The best HQSAR model was generated using atoms, bond and connectivity as fragment distinction parameters and fragment size 5-7 from a hologram length of 307 with 3 components. High conventional r2 (r2 = 0.825) and cross-validation r2 (r2(cv) = 0.726) values were obtained. CoMFA analyses varying lattice size and location, grid spacing, probe charges and using, Tripos standard and Indicator force field were performed. The best model was developed with 4 components using sp3-hybridized carbon atom with +1.0 charge as probe, grid spacing (2 A), lattice offset (1.0, 3.0, -2.5). The CoMFA model showed a conventional correlation coefficient r2 of 0.889 and across-validation r2(cv) equals to 0.633. The robustness and predictive ability of the HQSAR and CoMFA models have been validated by means of an external test set. The results indicate that both models possess high statistical quality in the prediction of analgesic potency of novel gallic acid analogs.     

Quantitative structure-activity relationships for a series of selective estrogen receptor-beta modulators

The estrogen receptor-beta subtype (ERbeta) is an attractive drug target for the development of novel therapeutic agents for hormone replacement therapy. Hologram quantitative structure-activity relationships (HQSAR) were conducted on a series of 6-phenylnaphthalene and 2-phenylquinoline derivatives, employing values of ERbeta binding affinity. A training set of 65 compounds served to derive the models. The best statistical HQSAR model (q(2) = 0.73 and r(2) = 0.91) was generated using atoms, bonds, connections and donor and acceptor as fragment distinction parameters, and fragment size default (4-7) with hologram length of 199. The model was used to predict the binding affinity of an external test set of 16 compounds, and the predicted values were in good agreement with the experimental results. The final HQSAR model and the information obtained from 2D contribution maps should be useful for the design of novel ERbeta modulators having improved affinity.     

Quantitative structure-activity relationships for a series of selective estrogen receptor-beta modulators

The estrogen receptor-beta subtype (ERβ) is an attractive drug target for the development of novel therapeutic agents for hormone replacement therapy. Hologram quantitative structure-activity relationships (HQSAR) were conducted on a series of 6-phenylnaphthalene and 2-phenylquinoline derivatives, employing values of ERβ binding affinity. A training set of 65 compounds served to derive the models. The best statistical HQSAR model (q ²?=?0.73 and r ²?=?0.91) was generated using atoms, bonds, connections and donor and acceptor as fragment distinction parameters, and fragment size default (4–7) with hologram length of 199. The model was used to predict the binding affinity of an external test set of 16 compounds, and the predicted values were in good agreement with the experimental results. The final HQSAR model and the information obtained from 2D contribution maps should be useful for the design of novel ERβ modulators having improved affinity.     

3-吡啶基醚类化合物的分子全息QSAR研究

采用分子全息定量构效关系(HQSAR, hologram quantitative structure-activity relationship)方法, 研究了28个3-吡啶基醚类化合物对乙酰胆碱α4β2受体的亲和性与它们的分子结构之间的关系, 讨论了分子碎片大小、分子碎片亚结构类型以及分子全息长度对QSAR的影响, 得到了较好的HQSAR模型, 模型的交叉验证系数平方q²＝0.670, 非交叉相关系数平方r²＝0.965, 偏差S＝0.093. 利用HQSAR的颜色编码, 对化合物中不同基团对亲和活性的影响进行了讨论, 对新配体的合成具有一定的指导作用.     

QSAR Study of Thieno [2,3-d] Pyrimidine as a Promising Scaffold Using HQSAR,CoMFA and CoMSIA

In this study, Co MFA, Co MSIA and HQSAR techniques were used to study the important characteristic activities of thieno [2,3-d] pyrimidine derivatives for effective antitumor activity. The q~2 value of cross validation of CoMFA model was 0.621, and r~2 value of non-cross validation was 0.959. The best cross validation q~2 value of CoMSIA model was 0.522, while the r~2 value of non-cross validation was 0.961. The most effective HQSAR model was obtained by taking atoms and bonds as fragments: the q~2 value of cross validation is 0.535, the r~2 value of non-cross validation is 0.871, the standard error of prediction is 0.488, and the optimal hologram length is 199. The statistical parameters from the model show that the data fit well and have high prediction ability. In addition, molecular docking is used to study the binding requirements between ligands and receptor proteins, including several hydrogen bonds between thieno [2,3-d] pyrimidine and active site residues. The results obtained from these QSAR modeling studies can be used to design promising anticancer drugs.     

QSAR and Pharmacophore Studies of Thiazolidine-4-carboxylic Acid Derivatives as Novel Influenza Neuraminidase Inhibitors Using HQSAR, Topomer CoMFA and CoMSIA

In order to understand the chemical-biological interactions governing their activities toward neuraminidase (NA), QSAR models of 28 thiazolidine-4-carboxylic acid derivatives with inhibitory influenza A virus were developed. The obtained HQSAR (hologram quantitative structure activity relationship), Topomer CoMFA and CoMSIA (comparative molecular similarity indices analysis) models were robust and had good exterior predictive capabilities. Moreover, QSAR modeling results elucidated that hydrogen bonds highly contributed to the inhibitory activity, then electrostatic and hydrophobic factors. Squared multiple correlation coefficients (R2) of HQSAR, Topomer CoMFA and CoMSIA models were 0.994, 0.978 and 0.996, respectively. Squared cross-validated correlation coefficients (Q2) of HQSAR, Topomer CoMFA and CoMSIA models were in turn 0.951, 919 and 0.820. Furthermore, squared multiple correlation coefficients for the test set (R2test) of HQSAR, CoMFA and CoMSIA models were 0.879, 0.912 and 0.953, respectively. Squared cross-validated correlation coefficients for the test set (Q2ext) of HQSAR, Topomer CoMFA and CoMSIA models were 0.867, 0.884 and 0.899, correspondingly.