Na4Co2.4Mn0.3Ni0.3(PO4)2P2O7: High potential and high capacity electrode material for sodium-ion batteries

Na₄Co_2.4Mn_0.3Ni_0.3(PO₄)₂P₂O₇ has been evaluated as a positive electrode for sodium-ion batteries. The novel material has two redox couples around 4.2 V and 4.6 V and can deliver the high capacity of ca. 103 mAh g^− 1 at the high current density of 850 mA g^− 1 (5 C). X-ray absorption spectroscopy (XAS) results show that the redox reactions of Co, Mn and Ni ions proceed simultaneously in the charge process and it is indicated the novel material provide high mixed potential by the redox reactions of Co, Mn and Ni ions. These findings suggest that the derivatives of Na₄Co₃(PO₄)₂P₂O₇ should be employed as high potential and high capacity electrode materials.     

Direct electrochemical conversion of bilirubin oxidase at carbon nanotube-modified glassy carbon electrodes

We report on direct electron transfer reactions of bilirubin oxidase at multi-walled carbon nanotube (MWCNT) modified glassy carbon electrodes (GCE). The bioelectrocatalytic oxygen reduction was recorded using linear sweep voltammetry (LSV) with BOD in solution, adsorbed and covalently linked to the nanotubes. The MWCNT modification of GC electrodes strongly enhances the oxygen reduction compared to the signals at unmodified GCE. Under anaerobic conditions with a high protein concentration in solution a pair of redox peaks with a formal potential of 450 ± 15 mV vs Ag/AgCl, 1 M KCl (pH 7.4) was found with cyclic voltammetry. The redox conversion is indicated to be surface-controlled and pH-dependent (54.5 mV/pH). The quasi-reversible redox reaction might be attributed to the trinuclear T2/T3 cluster of BOD.     

Influence of the external electric field distribution on α-Ni(OH)2 electrochemical-synthesis from a NiCl2 solution

Electrolytic systems of a symmetric, an asymmetric and a two-compartment were established in the present work to investigate the effect of the external electric field distribution on α-Ni(OH)₂ electrochemical-synthesis from a NiCl₂ solution. Results demonstrate the sample particle size increased in the order of symmetric, two-compartment and asymmetric systems, with a sharpened diffraction peak of the (1 0 1), (0 1 5) and (1 1 0) plane, and a broadened diffraction peak of (0 0 3) plane. However, the reversibility of the redox reactions and the energy transferred in the redox reactions in the electrodes assembled by the samples from the three electrolytic systems increased based on the contrary order. In terms of the electrolysis process, the energy consumption per unit mass increased in the order of symmetric, two-compartment and asymmetric systems. The catholyte pH for both symmetric and asymmetric systems were more stable than that for the two-compartment system. The external electric filed distribution affected the transportation of Ni²⁺ from the anolyte to the catholyte. At the end of electrolysis, the Ni²⁺ concentration in the anolyte of two-compartment system was obviously higher than that of symmetric and asymmetric systems.     

Gold sputtered electrode surfaces enhance direct electron transfer reactions of human cytochrome P450s

We immobilized human cytochrome P450 (CYP), a membrane-bound enzyme, onto both smooth and nanostructured surfaces of gold electrodes via a naphthalene thiolate monolayer film. Rapid electron transfer of CYP with an electrode as a redox partner took place when the enzyme was immobilized onto an electrode surface with nanostructures. This structure was easily prepared by conventional sputtering techniques. A well-defined pair of peaks was observed at ? 0.175 V (vs. SHE) with the largest heterogeneous electron transfer rate constant of 340 s^? 1 for human CYP. The positive redox potential shift of 45 mV upon drug (testosterone) binding was clearly detected, which corresponded to a change in the spin states of heme iron in CYP. The present study showed that gold sputtered surfaces are very useful for direct electron transfer reactions of human CYP isoforms.     

Direct measurement of electrochemical reaction kinetics in flow-through porous electrodes

This work demonstrates the feasibility of measuring electrochemical reaction rates on common flow-through porous electrodes by traditional Tafel analysis. A customized microfluidic channel electrode was designed and demonstrated by measuring the intrinsic kinetics of the V^2 +/V^3 + and VO^2 +/VO₂⁺ redox reactions in carbon paper electrodes under forced electrolyte flow. The exchange current density of the V^2 +/V^3 + reaction was found to be nearly two orders of magnitude slower than the VO^2 +/VO₂⁺ reaction, indicating that this may be the limiting reaction in vanadium redox flow batteries. The forced convection in this technique is found to generate reproducible exchange current densities which are consistently higher than for conventional electrochemical methods due to improved mass transport.     

A dysprosium nanowire modified carbon paste electrode for determination of levodopa using fast Fourier transformation square-wave voltammetry method

A new detection technique called the fast Fourier transform square-wave voltammetry (FFT-SWV) is based on the measurements of electrode admittance as a function of potential. The response of the detector (microelectrode) is fast, which makes the method suitable for most applications involving flowing electrolytes. The carbon paste electrode was modified by nanostructures to improve better sensitivity. The response is generated by a redox processes. The redox property of L-dopa was used for determination of it in human serum and urine samples. The support electrolyte that provided a more defined and intense peak current for L-dopa determination was at 0.05 mol l^?1 acetate buffer pH 7.0. Synthesized dysprosium nanowires make more effective surface like nanotubes [1], [2], [3], [4] so they are good candidates for using as a modifier for electrochemical reactions. The drug presented one irreversible oxidation peaks at 360 mV versus Ag/AgCl by modified nanowire carbon paste electrode which produced high current and reduced the oxidation potential about 80 mV.Furthermore, signal-to-noise ratio has significantly increased by application of discrete fast Fourier transform (FFT) method, background subtraction and two-dimensional integration of the electrode response over a selected potential range and time window. To obtain the much sensitivity the effective parameters such as frequency, amplitude and pH was optimized. As a result, C_DL of 4.0 × 10^?9 M and an LOQ of 7.0 × 10^?9 M were found for determination for L-dopa. A good recovery was obtained for assay spiked urine samples and a good quantification of L-dopa was achieved in a commercial formulation.     

Non-aqueous vanadium acetylacetonate electrolyte for redox flow batteries

The electrochemistry of a single-component redox flow battery employing vanadium(III) acetylacetonate in acetonitrile and tetraethylammonium tetrafluoroborate has been investigated. The electrode kinetics of the anodic and cathodic reactions were studied using cyclic voltammetry. The V(II)/V(III) and V(III)/V(IV) couples were quasi-reversible and together yielded a cell potential of 2.2 V. The diffusion coefficient for vanadium acetylacetonate was estimated to be in the range of 1.8–2.9 × 10^?6 cm² s^?1 at room temperature. The charge–discharge characteristics of this system were evaluated in an H-type glass cell, and coulombic efficiencies near 50% were achieved.     

Operando UV-visible spectroscopy evidence of the reactions of iodide as redox mediator in Li–O2 batteries

We monitored by means of UV-visible spectroscopy the formation and consumption of triiodide ion (I₃⁻), generated when iodide ion (I⁻) is used as redox mediator in lithium–oxygen batteries. Results evidence the initial formation of I₃⁻ during oxidation, and its decomposition during reduction. Correlation of absorbance with capacity is consistent with the mediation of peroxide oxidation above 3 V. Decrease of I₃⁻ absorbance and the appearance of a peak at a wavelength of 410 nm after 14 hours at open circuit voltage revealed side reactions associated to electrolyte degradation leading to the formation of HOI. This work shows that UV-visible spectroscopy is a valuable tool for following reactions involved in the operation of lithium–oxygen batteries based in the absorbance of the species formed or consumed.     

Cathodic supply of electrons to living microbial cells via cytocompatible redox-active polymers

Redox-active polymers composed of 2-methacryloyloxyethyl phosphorylcholine (MPC) and redox-active units are a new category of cytocompatible electron mediators which possess permeability of cell membranes. However, supply of electrons to living cells through the cytocompatible redox polymers has not been achieved so far due to the high redox potential of the redox polymers. Here we report that electrons were successfully supplied from a cathode into Escherichia coli cells, generating the current density of 7.8 μA cm^− 2 at − 0.40 V vs. SHE. It was also revealed that the cytocompatibility of viologen was improved simply by co-polymerization with MPC.     

Direct electrochemistry of cytochrome c on nanotextured diamond surface

Nanotextured diamond surfaces with geometrical properties close to protein dimensions were used for the realization of direct electron transfer of cytochrome c (cyt c) without any covalent bonding. The peroxidase activity of native and denatured cyt c was also investigated. Cyclic voltammograms of native cyt c show quasi-reversible electron transfer reactions, while no heme redox activity is detected for denatured cyt c. Unfolding (denaturation) of cyt c can be achieved in the presence of hydrogen peroxide. Partially or fully denatured cyt c showed higher peroxidase activity than native cyt c. This is because denatured cyt c loses its tertiary structure and hydrogen peroxide is easier to access the heme redox center. The apparent Michaelis–Menten constant K_m for native and denatured cyt c has been determined to be 0.23 mM and 0.08 mM.     

Electrochemically activated MnO as a cathode material for sodium-ion batteries

Besides classical electrode materials pertaining to Li-ion batteries, recent interest has been devoted to pairs of active redox composites having a redox center and an intercalant source. Taking advantage of the NaPF₆ salt decomposition above 4.2 V, we extrapolate this concept to the electrochemical in situ preparation of F-based MnO composite electrodes for Na-ion batteries. Such electrodes exhibit a reversible discharge capacity of 145 mAh g^− 1 at room temperature. The amorphization of pristine MnO electrode after activation is attributed to the electrochemical grinding effect caused by substantial atomic migration and lattice strain build-up upon cycling.     

Kinetics and mechanism of the reduction of colloidal MnO2 by glycyl-leucine in the absence and presence of surfactants

The kinetics of the reduction of water-soluble colloidal manganese dioxide by glycyl-leucine (Gly-Leu) has been investigated in the presence of perchloric acid both in aqueous as well as micellar media at 35 °C. The study was carried out as functions of [MnO₂], [Gly-Leu] and [HClO₄]. The first-order-rate is observed with respect to [MnO₂], whereas fractional-order-rates are determined in both [Gly-Leu] and [HClO₄]. Addition of sodium pyrophosphate and sodium fluoride enhanced the rate of the reaction. Further, the use of surfactant micelles is highlighted as, in favourable cases, the micelles help the redox reactions by bringing the reactants into a close proximity due to hydrogen bonding. While the ionic surfactants SDS and CTAB have not shown any effect on the reaction rate, the nonionic surfactant TX-100 has catalytic effect which is explained in terms of the mathematical model proposed by Tuncay et al. (1999). The Arrhenius and Eyring equations are valid for the reaction over the range of temperatures used and different activation parameters (E_a, ΔH^#, ΔS^# and ΔG^#) have been evaluated. Kinetic studies show that the redox reaction between MnO₂ and Gly-Leu proceeds through a mechanism combining one- and two-electron pathways: Mn(IV) → Mn(III) → Mn(II) and Mn(IV) → Mn(II). On the basis of the observed results, a possible mechanism has been proposed and discussed.     

Redox-active electrolyte supercapacitors using electroactive ionic liquids

Here we present redox ionic liquid supercapacitors (RILSCs) which use electrolytes made from ionic liquids modified with an electroactive function to increase the energy density of activated carbon electrodes via faradaic reactions. More specifically, two different ionic liquids were made by modifying either the imidazolium cation or the bis(trifluoromethanesulfonyl)imide anion with ferrocene in order to determine the importance of the electroactive ion's polarity. The functionalization of an ionic liquid with ferrocene led to high concentrations of redox moieties in the electrolyte (2.4 M) and a large maximum operating voltage (2.5 V). An energy density of up to 13.2 Wh per kg (both electrodes) was obtained which represents an 83% increase vs. the unmodified ionic liquid. When the ionic liquid's anion is modified with ferrocene, the self-discharge at the positive electrode is fully suppressed due to the deposition of a film on the electrode. The results presented herein demonstrate that electroactive ionic liquids constitute a promising alternative to conventional solute in solvent electrolytes found in energy storage devices, and are particularly well-suited for redox-active electrolyte supercapacitors.     

Highly efficient thermal cyclization reactions of alkylidene esters in continuous flow to give aromatic/heteroaromatic derivatives

Intramolecular thermal cyclization and benzannulation reactions of the Gould–Jacobs and Conrad–Limpach types were performed in a designed continuous flow reactor system at temperatures in the range of 300–360 °C and under high pressure conditions (100–160 bar) with very short residence times (0.45–4.5 min) in tetrahydrofuran as a low-boiling point solvent. Substituted heteroaromatic compounds including pyridopyrimidinones and hydroxyquinolines were synthesized in moderate to high yields. Application of the reaction conditions also allows the synthesis of naphthol and biphenyl derivatives. The procedure involves an easy work-up and the non-batchwise preparative synthesis method is suitable for automation.     

Mediated electron transfer with P450cin

P450cin stereoselectively hydroxylated its natural substrate 1,8-cineole to 2β-hydroxy-1,8-cineole in an electrochemical cell which allowed for substitution of the natural cofactor NADPH by artificial redox mediators. Cobalt sepulchrate, phenosafranine, safranine T, FAD and FMN enabled artificial electron transfer from the platinum electrode to P450cin via the redox partner protein cindoxin. The highest product formation, 6.50 ± 0.60 nmol (product) nmol (P450)^?1 min^?1 cm^?2, was achieved using cobalt sepulchrate. Surprisingly, phenosafranine and safranine T enabled electron transfer even in the absence of NADPH, cindoxin, and cindoxin reductase, thereby illustrating that none of the natural redox partners is needed for product formation.     

A disordered rock-salt Li-excess cathode material with high capacity and substantial oxygen redox activity: Li1.25Nb0.25Mn0.5O2

A disordered rocksalt Li-excess cathode material, Li_1.25Nb_0.25Mn_0.5O₂, was synthesized and investigated. It shows a large initial discharge capacity of 287 mAh g^− 1 in the first cycle, which is much higher than the theoretical capacity of 146 mAh g^− 1 based on the Mn³⁺/Mn⁴⁺ redox reaction. In situ X-ray diffraction (XRD) demonstrates that the compound remains cation-disordered during the first cycle. Electron energy loss spectroscopy (EELS) suggests that Mn and O are likely to both be redox active, resulting in the large reversible capacity. Our results show that Li_1.25Nb_0.25Mn_0.5O₂ is a promising cathode material for high capacity Li-ion batteries and that reversible oxygen redox in the bulk may be a viable way forward to increase the energy density of lithium-ion batteries.     

Amperometric determination of NADH at a Nile blue/ordered mesoporous carbon composite electrode

A novel amperometric NADH sensor was presented based on a Nile blue A (NB)/ordered mesoporous carbon (OMC) composite (NB/OMC) electrode. Cyclic voltammetric tests revealed the NB/OMC displayed a new well defined redox couple in the potential range of ?250 to 50 mV in pH 6.85 phosphate buffer. Interestingly, we found that only the new redox couple exhibited significant catalytic activity towards the oxidation of NADH. Under a lower operation potential of ?0.1 V, NADH could be linearly detected up to 350 μM with an extremely lower detection limit of 1.2 μM (S/N = 3).     

Stable free-standing aramid resin film containing vanadium pentoxide and new colour electrochromism of the film by electrodeposition of gold

Vanadium pentoxide (V₂O₅) was electrodeposited on a poly(p-phenylene terephtalamide) (PPTA)-film coated electrode. The cyclic voltammogram of the film had a reversible redox current peak. The film was dark green in the reduced state and yellow in the oxidized state. To obtain new colour, gold was further electrodeposited on the film. Not only the redox current peak but also a new redox current shoulder appeared in the cyclic voltammogram of the obtained film, and it exhibited a multicoloured electrochromism: blackish green ↔ dark green ↔ green ↔  bright red. The red colour in the oxidized state was first obtained for the V₂O₅ film. The new redox current shoulder and the colour were probably due to Au_yV₂O₅ partially formed during electrodeposition of the gold. The redox of the Au_yV₂O₅ was accompanied by egress and ingress of Li⁺ ions and the new colour change.     

Development of an enzymatic microreactor based on microencapsulated laccase with off-line capillary electrophoresis for measurement of oxidation reactions

Microencapsulation is used here as a new technique to immobilize enzymes in a microreactor coupled off-line to capillary electrophoresis (CE), allowing the determination of enzymatic reaction products. The redox enzyme laccase was encapsulated using the method of interfacial cross-linking of poly(ethyleneimine) (PEI). The 50 μm diameter capsules were slurry packed from a suspension into a capillary-sized reactor made easily and quickly from a short length of 530 μm diameter fused-silica tubing. The volume of the bed of laccase microcapsules in the microreactor was in the order of 1.1 μL through which 50 μL of the substrate o-phenylenediamine (OPD) was flowed. The oxidation product 2,3-diaminophenazine (DAP) and the remaining OPD were quantified by CE in a pH 2.5 phosphate buffer. Peak migration time reproducibility was in the order of 0.4% RSD and peak area reproducibility was less than 1.7% RSD within the same day. Using the OPD peak area calibration curve, a conversion efficiency of 48% was achieved for a 2-min oxidation reaction in the microreactor.     

Enhanced oxygen evolution at hydrous nickel oxide electrodes via electrochemical ageing in alkaline solution

The effect of electrochemically ageing hydrous nickel oxide films via slow repetitive potential multi-cycling across the main nickel (II/III) redox peak was investigated in an aqueous base environment using cyclic voltammetry and steady state polarisation curves in the oxygen evolution reaction (OER) region. Similarities between hydrous nickel oxide films and electroprecipitated ‘battery type’ nickel oxide were shown due to their similar change in redox and oxygen evolving properties as a result of film ageing. This ageing method was found to significantly enhance the OER performance of the hydrous nickel oxide electrode with the OER overpotential decreasing by 60 ± 2 mV and experiencing a 10 fold increase in OER rate for a fixed overpotential over that of an un-aged electrode. The OER turnover frequency for an aged electrode was found to be 1.16 ± 0.07 s^− 1 in comparison to 0.05 ± 0.003 s^− 1 for a hydrous nickel oxide electrode not subjected to ageing.