Polychlorinated polyamides—III. Synthesis and characterization of polyamides derived from perchloroterephthaloyl dichloride

Six new polyamides have been prepared either by polymerization in solution or by interfacial polymerization by reacting perchloroterephthaloyl dichloride with aromatic diamines. The polymers were characterized by i.r. spectroscopy, elemental analysis, DSC, and TGA. The glass transition temperature, the melting temperature, and the thermal decomposition temperature have been determined. In order to estimate the molecular weights, intrinsic viscosities were determined. Some of the polymers showed high thermal stability.     

Synthesis and characterization of optically active polyamides derived from carbohydrate-based monomers

The synthesis of three new stereoregular AB-type polyamides based on D -ribono-1,4-lactone, L -arabinose, and D -xylose has been carried out by the active ester polycondensation method. These polyamides were characterized by elemental analysis, IR and NMR spectroscopies, and powder X-ray diffraction. They displayed optical activity and had a pronounced affinity to water, although they were not soluble in this solvent. The polyamide obtained from D -ribono-1,4-lactone was highly crystalline and yielded films with spherulitic texture. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 3645–3653, 1997     

Synthesis and characterization of novel aromatic polyamides derived from two heterocyclic diamines

Two diamines were synthesized as new aromatic monomers. A series of novel aromatic polyamides (aramids) were also synthesized by direct and indirect polycondensation of these diamines with various aromatic dicarboxylic acids. These aramids have inherent viscosities of 0.43-0.84 dl/g and were obtained in quantitative yield.     

Synthesis and characterization of chiral polyamides derived from glycine and (S)-5-amino-4-methoxypentanoic acid

Stereoregular, enantiomerically pure, chiral polyamides of the –AB– type, containing a natural (glycine) and a synthetic [(S)-5-amino-4-methoxypentanoic acid (AMP)] component have been prepared by the active ester polycondensation method. Thus, polyamide 7 was obtained by polycondensation of the conveniently activated H₂NGly–AMPCO₂R unit ( 6 ). In this reaction, 7 appeared accompanied by a considerable amount of cyclic (Gly–AMP)₂ ( 8 ), which makes the isolation and purification of 7 difficult. The formation of cyclic byproducts could be avoided by preparing and polymerizing the oligoamide H₂NGly–AMP–AMPCO₂R ( 11 ), which has the terminal carboxyl group activated as the pentachlorophenyl ester. The resulting polyamide ( 12 ) was obtained in 85% yield and free of macrolactams, such as 8 . The new polyamides 7 and 12 were characterized by elemental analysis and infrared and ¹H- and ¹³C-nuclear magnetic resonance spectroscopies. Thermal studies revealed that 12 is crystalline and yields films with spherulitic texture by slow evaporation of formic acid solutions. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 2741–2748, 1998     

Synthesis and characterization of new polyamides derived from di(4-cyanophenyl)isosorbide

New optically active polyamides were synthesized according to two ways: using a microwave-assisted polycondensation of an optically active isosorbide-derived diacylchloride with different aromatic diamines in NMP and using interfacial polymerization from an isosorbide-derived diamine with different diacylchlorides. The polymers are obtained with inherent viscosities in the range from 0.11 to 1.05 dL/g. The DSC and TGA measurements clearly demonstrate the high thermal stability of these polymers when considering the range of the melting points from 200 °C to 300 °C and the absence of decomposition till 350 °C.     

Stereoregular polyamides derived from methylene-L-tartaric acid and aliphatic diamines

Stereoregular polyamides containing two chiral backbone carbons in the repeating unit were prepared by polycondensation of bis(pentachlorophenyl) 2,3-O-methylene-L -tartrate with 1,9 and 1,12-alcanediamines activated as N,N′-bis(trimethylsilyl) derivatives. The polymers were characterized by elemental analysis, IR, and ¹H-NMR spectroscopy, and differential scanning calorimetry. Both viscosimetry and GPC were used to estimate the molecular weights which ranged between 6000 and 44000. These polytartaramides were readily soluble in chloroform, displayed moderate optical activity in solution, and formed highly crystalline films.     

Polychlorinated polyamides. II. Synthesis and characterization of polyamides derived from 2, 5-dichloroterephthaloyl dichloride and perchloroterephthaloyl dichloride

New thermally stable polyamides were prepared by interfacial polymerization of the title compounds and various aliphatic and aromatic diamines. The polymers were characterized by infrared spectrometry, elemental analysis, and differential scanning calorimetry. The molecular weights of the polymers were estimated by viscosity measurements. The influence of the halogen content on the thermal properties and degree of polymerization of the polymers was studied. One of the polyamides was fractionated to determine the degree of polydispersity.     

Synthesis and characterization of functional l-lactic acid/citric acid oligomer

Oligomers of l-lactic acid and citric acid (PLCA) were synthesized by reacting lactic acid with citric acid in the presence of stannous chloride. The chemical compositions of these multicarboxylated oligomers were verified by FT-IR and ¹H-NMR spectroscopy. The thermal characteristics of the oligomers, such as glass transition temperature T_g, melting temperature T_m and melting enthalpy, were confirmed by DSC. The crystallinity of the oligomers were determined by DSC and WXRD. Meanwhile, the acid-base surface characteristics of PLCA have been determined by contact angle. The results implicated that these oligomers may be used to entrap the cospecies on PLLA surface in tissue engineering.     

Synthesis and characterization of novel thermally stable aromatic and semiaromatic polyamides derived from thiourea-based flexible diacid dichlorides

Abstract  

New diacid dichlorides bearing phenyl thiourea groups were prepared by a facile synthetic approach and characterized using spectroscopic and elemental analyses. A series of novel aromatic and semiaromatic polyamides were prepared via a condensation route from the synthesized diacid dichlorides with 4,4′-oxydianiline. The polymers were characterized by FT-IR, ¹H NMR, ¹³C NMR, and their physical properties, including their solution viscosities, solubilities and thermal properties, were studied too. Polyamides with phenyl thiourea moieties in the backbone showed good solubilities in amide solvents such as DMAc, DMF, DMSO, and NMP. All of the synthesized polymers had η _inh values of 0.042–0.053 dm³/g, and were obtained in quantitative yield. GPC measurements of the synthesized polyamides indicated M _w values of 64,759–86,172. The crystallinity of the polymers was evaluated via their X-ray diffraction patterns. Their glass transition temperatures were found to be 218–229 °C. Furthermore, thermogravimetric analysis indicated that the polymers were thermally stable in the range 300–398 °C in a N₂ atmosphere.     

Synthesis and characterization of Schiff-base-containing polyamides

A series of new Schiff base polyamides（PAs） were synthesized by polycondensation of benzilbisthiosemicarbazone diamine（LH₆） with different commercially available aliphatic and aromatic diacid chlorides. The monomer and all the PAs were characterized by FTIR,¹H-NMR,and elemental analysis.The prepared polyamides showed inherent viscosities in the range of 0.30-0.36 dL/g in DMF at 25℃,indicating their moderate molecular weight.The PAs were completely soluble in aprotic polar solvents such as dimethylformamide（DMF）,N-methylpyrolidone（NMP）, tetrachloroethane（TCE）,dimthylsulfoxide（DMSO） and also in H₂SO₄ and partially soluble in THF,acetone and chloroform at room temperature.Thermal analysis showed that these PAs were practically amorphous and exhibited 10%weight loss above 220℃.     

Aromatic polyamides and polyimides derived from 3,3′-diaminobiphenyl: Synthesis,characterization, and molecular simulation study

In this article a new synthesis of 3,3′-diaminobiphenyl (3,3′-DABP) is described, along with the preparation and characterization of polyamides and polyimides based on it. Reactivity of this monomer was calculated by a molecular simulation study, using ab initio quantum-mechanical methods. Terephthaloyl and isophthaloyl chloride were used for the synthesis of polyamides, while 3,3′,4,4′-biphenylenetetracarboxylic acid dianhydride and 4,4′-(hexafluoroisopropylidene) diphthalic anhydride were used for the synthesis of polyimides. Medium to high molecular weight polymers were attained, with inherent viscosities near or higher than 1.0 dL/g, the solubility of the 3,3′-DABP polymers was much better than that of the homologous polymers from benzidine (4,4′-DABP), the glass-transition temperatures were lower, by about 40°C, and the thermal resistance, as measured by thermogravimetry, was virtually the same. Amorphous films, made from cast polymer solutions, showed excellent mechanical properties, comparable to conventional aromatic polyamides and polyimides. Theoretical calculations demonstrated that the radius of giration, end-to-end distance and density of poly(3,3′-DABP-isophthalamide) were lower than those of poly(4,4′-DABP-isophthalamide), as a consequence of the chain folding induced in the backbone by the m-substitution in 3,3′-DABP. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4646–4655, 1999     

Synthesis and characterization of organosoluble polyamides from quinoxaline based diamine

<正>Aromatic/aliphatic polyamides were synthesized from a diamine monomer,2,3-bis-p-aminophenylquinoxaline (Ⅳ),based on quinoxaline and various dicarboxylic acids of aliphatic,aromatic and heterocyclic.The diamine and polyamides were characterized by elemental analysis,FTIR and ~1H-NMR.The solubility of the polyamides was affected by the quinoxaline and heterocyclic groups in the polymer chain.They were all soluble in common organic solvents such as dimethylsulfoxide(DMSO),N,N-dimethylformamide(DMF) and N-methylpyrolidone(NMP).The polyamides showed inherent viscosity in the range of 0.25-0.3 dL/g in DMSO at 25℃and good thermal stability with the char yields in the range of 65%-82%at 600℃in nitrogen.     

Synthesis and characterization of thermoplastic polyesters and polyamides from sebacyl bisketene

Sebacyl bisketene was generated in solution at ?78°C. Copolymerization in solution at 0°C with the secondary diamines, piperazine and N,N′dimethyl-1,6-hexamethylenediamine, yielded the polyamides poly(1,4-piperazylsebacyl) and poly[(methylimino)hexamethylene(methylimino)sebacyl], respectively. The polyamides were obtained in yields of 50–90%. The former had a glass transition temperature (T_g) at 30°C and a melting temperature at 165°C, whereas the latter had only a T_g at ?15°C. The polymers were insoluble in the usual polyamide solvents. Copolymerization with the diol bisphenol A yielded poly(oxy-1,4-phenyleneisopropylidene-1,4-phenyleneoxysebacyl). The polyester was obtained in yields up to 99%. Gel permeation chromatography (GPC) determinations showed molecular weights up to 50,000 when acetone was the reaction solvent but only 12,000 when tetrahydrofuran (THF) was the reaction solvent; the T_g for the polyester varied with the molecular weight with a maximum at 15°C. Tensile properties were obtained for the polyesters with molecular weights greater than 35,000.     

Synthesis and characterization of norbornane-containing cardo polyamides

A new diamine, 2,2-bis[4-(4-aminophenoxy)phenyl]norbornane (BAPN), containing both ether and norbornane cardo groups, was synthesized in three steps started from norcamphor. A series of cardo polyamides were obtained by the direct polycondensation of BAPN and various aromatic dicarboxylic acids in N-methyl-2-pyrrolidinone (NMP) using triphenyl phosphite and pyridine as condensing agents. Polyamides had inherent viscosities in the range of 0.82–1.58 dL g⁻¹, and were readily soluble in polar aprotic solvents such as NMP, N,N-dimethylacetamide (DMAc) and N,N-dimethylformamide and dimethyl sulfoxide. These polymers were cast in DMAc solution into transparent, flexible, and tough films that were further characterized by X-ray and mechanical analysis. All the polymers were amorphous, and the polyamide films had a tensile strength range of 71–89 MPa, an elongation at break range of 5–9%, and a tensile modulus range of 2.0–2.3 GPa. Polyamides showed glass transition temperatures in the range of 256–296°C as measured by DSC and thermogravimetric analysis indicated no weight loss below 450°C in nitrogen and air atmosphere. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2791–2794, 1999     

Synthesis and optical properties of asymmetric polyamides derived from cyclopropyl diacids and diamines

The polyamides were prepared from the dicarbonyl chloride of (+) (S)- or (?)(R)-trans-1,2-cyclopropanedicarboxylic acid (C3A) with either the dihydrochloride salt of (+)(S)- or (?)(R)-trans-1,2-diaminocyclopropane (C3B) or the dihydrobromide salt of (+)(S)- or (?)(R)-trans-1,2-bis(methylamino)cyclopropane (C3MB) by interfacial polycondensation. Several diamide model compounds composed of these monomers were also synthesized. The polyamides [poly(C3A-C3B)] derived from C3A and C3B have the capability of hydrogen bonding, while the polyamides [poly-(C3A-C3MB)] derived from C3A and C3MB do not. Poly(C3A-C3B) were insoluble in common organic solvents except strong acids. Poly(C3A-C3MB) were soluble in common organic solvents. Poly(C3A-C3B) had melting points higher than 300°C. Poly(C3A-C3MB) melted at 180–235°C. The ORD and CD study has shown that poly(+)C3A(+)C3B in methane sulfonic acid (MSA), 2,2,2-trifluoroethanol (TFE) (5 v % MSA), and tetramethylenesulfone (TMS) (5 v % MSA) exhibits a very strong Cotton effect or CD peak at 212–218 mμ, attributable to a component of the split π–π^* transition of the amide chromophores. Poly(+)C3A(+)C3MB in MSA and TFE (5 v % MSA) shows a strong Cotton effect or CD peak at 217–223 mμ and an intermediate Cotton effect or CD trough at 202–204 mμ as well as an intermediate Cotton effect or CD trough at 220–222 mμ and an intermediate Cotton effect or CD peak at 202–204 mμ in TFE and TMS. These peaks and troughs may be assigned to splitting of the π–π^* transition. The CD spectra of poly(+)C3A(+)C3MB in nonacidic media are quite different from those in acidic media: they are almost mirror images. The CD spectra in this transition induced by MSA suggests that a transition from a compact helix to another more extended helix with opposite handedness occurs similar to poly-L-proline I ? II. This transition may be explained by electrostatic repulsion between protonated amide groups. Viscosity data have shown that the conformation is changed to a highly extended from in acidic media. The polyamides and diamides derived from enantiomers exhibit mirror image spectra. Poly(+)C3A(+)C3B and poly(+)C3A(+)C3MB in every solvent studied exhibit a marked enhancement of the rotatory strength of ORD and CD with respect to the corresponding diamide models.     

Synthesis and characterization of polymers derived from 2,5-dimethoxy-terephthaldehyde and 2,5-dimethoxy-terephthalic acid

Polyamides were synthesized from 2,5-dimethoxyterephthaloyl dichloride and diamines. Also, polyimines and polyaldoles were prepared from 2,5-dimethoxy-terephthaldehyde with diamines and ketones. The polymers were characterized by elemental analysis and infrared and NMR spectroscopy. Their intrinsic viscosity, glass transition temperature, and thermaldecomposition temperatures were determined.     

Synthesis and characterization of polyamides and poly(amide-imide)s derived from 2,2-bis(4-aminophenoxy) benzonitrile

A series of polyamides and poly(amide-imide)s were prepared by the direct poly-condensation of 2,2-bis(4-aminophenoxy) benzonitrile [4-APBN] with aromatic dicarboxylic acids and bis(carboxyphthalimide)s in N-methyl-2-pyrrolidone [NMP] with triphenyl phosphite and pyridine as condensing agents. The synthesis of 4-APBN involves a nucleophilic displacement reaction in dipolar aprotic solvent with the alkali metal salt of p-aminophenol and an activated aromatic dichloro compound. Bis(carboxyphthalimide)s were prepared by condensation of 4,4^′-diaminodiphenylsulfone, 3,3^′-diaminodiphenylsulfone, 4,4^′-diaminodiphenylether, 4,4^′-diaminodiphenylmethane, 3,3^′-diaminobenzophenone, and trimellitic anhydride at a 1:2 molar ratio. The inherent viscosities of the resulting polymers were found to be in the range of 0.31-0.93 dl/g and glass transition temperatures between 235 and 298 °C. All polymers were soluble in aprotic polar solvents such as dimethylsulfoxide and NMP. The results of thermogravimetry revealed that all the polymers showed no significant weight loss before 400 °C. Wide-angle X-ray diffractograms revealed that all polymers were found to be amorphous except for the polyamide derived from isophthalic acid and polyamide-imides derived from diaminodiphenylether and diaminobenzophenone based bis(carboxyphthalimide)s.     

pH and reduction sensitive bio-based polyamides derived from renewable dicarboxylic acid monomers and cystine amino acid

New reduction biodegradable and pH-sensitive linear nonpeptidic polyamides were synthesized by interfacial polycondensation of diamines and cystine amino acid with dicarbonyl dichlorides derived from renewable dicarboxylic acids. The polymer degradability by glutathione is enhanced by the introduction of disulfide linkages, and the response to pH change is enhanced by introducing pendant carboxylic acid functions. The results of pH sensitivity tests indicated that protonation–deprotonation of the carboxylic acid group at about pH of 4.1 with cation exchange capacity 4.5?meq?g^?1 and the disulfide bonds in polyamides were effectively cleaved.     

水杨醛缩赖氨酸Schiff碱金属配合物的合成和表征

本文合成了以N-亚水杨基赖氨酸Schiff碱为配体的过渡金属配合物,并研究了它们的组成、性质和抗菌活性。