Molecular level approach to the origin of the steric control in organozinc catalyst for oxirane polymerization

A new type of single crystals was formed by a reaction between diethylzinc and DL-1-methoxy-2-propanol. The constituent unit of this single crystal was shown to be a two to two complex of zinc dialkoxide and ethylzinc alkoxide, [MeOCH² CH(Me)OZnOCH(Me)CH² OMe]² · [EtZnOCH(Me)CH² OMe]², which has a chair type structure. The two to two complex was found to exhibit higher activity and stereospecificity in the PO polymerization compared with those of the one to six complex which were reported previously. Molecular level elucidation was made on the basis of NMR studies for polymerization system with a partly deuterated two to two complex as initiator. The excellent stereospecificity in isotactic propagation was ascribed to the highly chiral hole around the active site of the chair type complex. Another series of study revealed chemical behavior of cyclohexene oxide (CHO), which is different from that of PO, toward several organozinc compounds. The two to two complex was the only catalyst which showed high activity for both MO and CHO polymerizations. Three samples (I), (II) and (III) of poly-(CHO) were prepared with Et²Zn, EtZnOR and the two to two complex, respectively. After careful examinations of each of the three samples, it was concluded that most parts of the main chain of polymer (III) molecule were composed of syndiotactic triad, SS-RR-SS(or RR-SS-RR), while polymer (I) and (II) molecules contained syndiotactic and heterotactic triads in comparative amounts. In the CHO polymerization, the chiral hole of the two to two complex cannot recognize the mode of orientation of the achiral monomer, and the complex seems to serve as a simple bulky group which facilitates syndiotactic addition of CHO monomer molecule to the active site, strong steric effects being exerted from the penultimate unit of the growing chain during the propagation stage.     

Reactive Polymers and Oligomers from Cyclic Ethers and Cyclic Sulfides

(2-Bromoethyl)oxirane is converted in 39% yield to poly-[(2-bromoethyl)oxirane] of inherent viscosity 1.99 dL/g. The AlEt₃/H₂O/AcAc system is a very effective initiator for the polymerization of (2-bromoethyl)oxirane. Poly[(2-bromoethyl)-oxirane] is a white elastomer, soluble in CHCl₃ and insoluble in CH₃OH. Polyether-urethane hydrogels are prepared by the room temperature crosslinking of poly[(3-hydroxypropyl)oxirane] with aliphatic or aromatic diisocyanates. These networks absorb 100–200% of their weights in water, and can be prepared in transparent form with potential application as biomaterials or contact lenses.     

Easily available niobium(V) mixed chloro‐alkoxide complexes as catalytic precursors for ethylene polymerization

The dinuclear [NbCl_n(OR)_(5‐n)]₂ (n = 4, R = Et, 1 ; n = 4, R = CH₂Ph, 2 ; n = 3, R = Et, 3 ; n = 2, R = Et, 4 ; n = 2, R = , 5 ), and [Nb(OEt)₅]₂, 6 , and the mononuclear niobium compounds NbCl₄[κ²? OCH₂CH(R′)OR] (R = Me, R′ = H, 7 ; R = Et, R′ = H, 8 ; R = CH₂Cl, R′ = H, 9 ; R = CH₂CH₂OMe, R′ = H, 10 ; R = R′ = Me, 11 ), NbBr₄[κ²? OCH₂CH₂OMe], 12 , and NbCl₃(κ²? OCH₂CH₂OMe)(κ¹? OCH₂CH₂OMe), 13 , were tested in ethylene polymerization. Optimized reaction conditions included the use of D‐MAO as co‐catalyst and chlorobenzene as solvent at 50 °C. Complex 7 , whose X‐Ray structure is described here for the first time, exhibited the highest activity ever reported for a niobium catalyst in alkene polymerization [151 kg_polymer × mol_Nb^?1 × h^?1 × bar^?1]. Compounds 1 , 3‐5 , 8 , 13 showed activities similar to that of 7 . Linear polyethylenes (characterized by FT‐IR, NMR, GPC, and DSC analyses) with a broad polydispersivity were obtained. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and properties of poly‐1‐olefins

The oligomerization and polymerization of 1‐pentene using Cp₂ZrCl₂, Cp₂HfCl₂, [(CH₃)₅C₅]₂ZrCl₂, rac‐[C₂H₄(Ind)₂]ZrCl₂, [(CH₃)₂Si(Ind)₂]ZrCl₂, (CH₃)₂Si(2‐methylbenz[e]indenyl)₂ZrCl₂, Cp₂ZrCl{O(Me)CW(CO)₅}, Cp₂ZrCl(OMe) and methylaluminoxane (MAO) has been studied. The degree of polymerization was highly dependent on the metallocene catalyst. Oligomers ranging from the dimer of 1‐pentene to polymers of poly‐1‐pentene with a molar mass M_w = 149000 g/mol were formed. Cp₂ZrCl{O(Me)CW(CO)₅} is a new highly active catalyst for the oligomerization of 1‐pentene to low molecular weight products. The activity decreases in the order Cp₂ZrCl{O(Me)CW(CO)₅} > Cp₂ZrCl₂ > Cp₂ZrCl(OMe). Furthermore, poly‐1‐olefins ranging from poly‐1‐pentene to poly‐1‐octadecene were synthesized with (CH₃)₂Si(2‐methyl‐benz[e]indenyl)₂ZrCl₂ and methylaluminoxane (MAO) at different temperatures. The temperature dependence of the molar mass can be described by a common exponential decay function irrespective of the investigated monomer.     

Synthesis and characterization of polysiloxane–polyamide block and graft copolymers

The synthesis of copolymers constituted of a central polydimethylsiloxane (PDMS) block flanked by two polyamide (PA) sequences is described. α, ω-diacyllactam PDMS, when used as macroinitiator of lactam polymerization, gives rise to the expected triblock copolymer. Likewise, PDMS-g-PA graft copolymers are obtained from acyllactam containing polysiloxanes. NaAlH₂(OCH₂CH₂OMe)₂ turns out to be the best suited activating agent for the polymerization of ?-caprolactam, in the experimental conditions required for the synthesis of polysiloxane–polyamide copolymers. The nucleophilic species formed by reaction of NaAlH₂(OCH₂CH₂OMe)₂ with ?-caprolactam—2-[bis(methoxyethoxy) aluminumoxy]-1-azacycloheptane sodium—is indeed nucleophilic enough to bring about the growth of PA chains and mild enough to stay inert towards PDMS. © 1993 John Wiley & Sons, Inc.     

NEW NONGEMINAL CYCLOPHOSPHAZENES

A series of new nongeminally-substituted cyclic phosphazenes with various substituents has been prepared via deprotonation-substitution reactions at the Me groups of both the cis and trans isomers of [(Me)(Ph)PN] ₃ . Treatment of [(Me)(Ph)PN] ₃ with n-BuLi followed by reaction with organic electrophilic reagents affords a variety of cyclic derivatives, [(RCH ₂ )(Ph)PN] ₃ , [R = Me, Cl, Br, I, (CH ₂ ) ₂ Br, CH ₂ CH═CH ₂ , SR, C(═O)OLi, C(═O)OMe, C(═O)OEt]. The structures of theses cis cyclic phosphazenes, which were obtained by x-ray diffraction, illustrate the basket-like shape of the molecules. Heating the cis and trans isomers of the parent [(Me)(Ph)PN] ₃ produced mixtures of cyclic trimers and tetramers. The latter were isolated and characterized by x-ray crystallography. Nanoparticles of gold and silver were prepared by reduction of metal salts with a reducing agent in the presence of selected trimers.     

Zur reaktion von metall-koordiniertem kohlenmonoxid mit yliden: XI. Einige neuartige η1-vinyl-komplexe des eisens durch deprotonierung kationischer carbenkomplexe mit trimethyl(methylen)phosphoran

Novel η¹-vinyl complexes of the type Cp(CO)(L)FeC(OMe)C(R)R′ (R = R′ = H, Me; R = H, R′ = Me; L = Me₃P, Ph₃P) are obtainied via methylation of the acyl complexes Cp(CO)(L)FeC(O)R (R = Me, Et, i-Pr) with MeOSO₂F and subsequent deprotonation of the resulting carbene complexes [Cp(CO)(L)FeC(OMe)R]SO₃F with the phosphorus ylide Me₃PCH₂. The same procedure can be applied for the synthesis of the pentamethylcyclopentadienyl derivative C₅Me₅(CO)(Me₃P)FeC(OMe)CH₂, while treatment of the hydroxy or siloxy carbene complexes [Cp(CO)(L)FeC(OR)Me]X (R = H, Me₃Si; X = SO₃CF₃) with Me₃CH₂ results in the transfer of the oxygen bound electrophile to the ylidic carbon. Some remarkable spectroscopic properties of the new complexes are reported.     

Novel D- and T-functionalized Polysiloxane Matrices for Reactions in Interphases

New hydrocarbon bridged co-condensation agents of the type RSi(OMe)₂(CH₂)_zC₆H₄(CH₂)_z(OMe)₂SiR { 3[Ph(1,4-C₃D⁰)₂] , z = 3, R = Me; 3[Ph(1,4-C₃T⁰)₂] , z = 3, R = OMe; 4[Ph(1,4-C₃D⁰)₂] , z = 4, R = Me} were synthesized by hydrosilylation of the corresponding α,ω-dienes CH₂=CH–(CH₂)_z–2–C₆H₄–(CH₂)_z–2–CH=CH₂ [z = 3 ( 1 ), 4 ( 2 )] with HSiR(OMe)₂ (R = Me, OMe). These silane monomers were sol-gel processed, partially with MeSi(OMe)₃ ( T ⁰) to give the polysiloxanes 3 a , 3 b , 4 c , 3 d , 3 e , 4 f , and 3 ab (Table 1, Schemes 2 and 3); D = D type silicon atom (two oxygen neighbors), T = T type of silicon atom (three oxygen neighbors). The relative amounts of T and D silyl species and the degrees of condensation were determined by ²⁹Si and ¹³C CP/MAS NMR spectroscopic investigations. ²⁹Si and ¹³C CP/MAS NMR relaxation time studies (T_SiH, T_CH, T_1ρH), and 2 D WISE NMR experiments were applied to get knowledge about the polymer dynamics. For the first time protons of such polysiloxane systems were detected by ¹H SPE/MAS NMR measurements in suspension. Mobility studies were carried out in different solvents. Furthermore the swelling capacities of the polymers 3 a , 3 b , and 4 c in different solvents and the BET surface areas of all materials were investigated. SEM micrographs show the morphology of 3 a and 3 b .     

Zur reaktion von metall-koordiniertem kohlenmonoxid mit yliden: XII. Eisenkomplexe mit η1-koordinierter vinylgruppe: spontane zweif achmethylierung des β-kohlenstoffs mit methyliodid oder methylfluorsulfonsäureerster

The reaction of vinyl complexes Cp(CO)(R₃P)FeC(OMe)CH₂ (R  Me, R  Ph) with the methylating reagents MeX (X  OSO₂F, I) in the molar ratio 1/1 affords a mixture of the carbene complexes [Cp(CO)(R₃P)FeC(OMe)R]X (R  Me, Et, i-Pr). Their formation is explained via a series of acid/base equilibria established between vinyl and carbene complexes.     

Haloacetylated enol ethers. 14 [6]. Reaction of β-alkoxyvinyl trifluoromethyl ketones with N-methylhydroxylamine

The reaction of a series of β-methoxyvinyl trifluoromethyl ketones [CF₃COC(R²)?C(OMe)R¹, where R¹ = Me, -(CH₂)₃-C3, -CH₂)₄-C3, Ph and R² = H, Me, -(CH₂)₃-C4, -(CH₂)₄-C4] with N-methylhydroxylamine is reported. The regiochemistry of the reaction are explained by MO calculation data.     

Fast atom bombardment mass spectrometry of some alkoxv- and chloro-silanes

The positive and negative FAB mass spectra of a series of alkoxy- and chloro-silanes X_m(CH₃)₃-_mSi(CH₂)_nR [m = 1 or 3, n = 3, 10 or 17, X = Cl or OMe or OEt, R = Me, NH₂, glycidoxy, COOMe, NHCO(CH₂)₇COOMe or NHCO(CH₂)₁₀CH₂OAc] were recorded in NBA and NPOE matrices. The chlorosilanes underwent rapid hydrolysis into silanols which condense to form siloxanes, the process being complete in NBA and partial in NPOE, yielding siloxane-based fragment ions in the positive spectra and silyloxyanions in the negative spectra. The alkoxysilanes were more resistant to hydrolysis, affording abundant [MH – HX]⁺ ions (X = OMe or OEt) in their positive FAB spectra and moderate to high intensity [M – H]^? ions in the negative mode, the latter undergoing characteristic sequential loss of C₂H₄, EtOH and C₂H₄. Significant variations were observed in the positive spectra of all the silanes with change of matrix.     

trans‐Chloridobis[(Z)‐1‐imino‐1‐methoxyethane‐κN](triphenylphosphane‐κP)platinum(II) chloride monohydrate

The title compound, [PtCl(C₃H₇NO)₂(C₁₈H₁₅P)]Cl·H₂O or trans‐[PtCl{Z‐HN=C(Me)OMe}₂(PPh₃)]Cl·H₂O, crystallizes from an acetone solution of isomeric trans‐[PtCl{E‐HN=C(Me)OMe}₂(PPh₃)]Cl. The two HN=C(Me)OMe ligands show typical π‐bond delocalization over the N—C—O group [Cini, Caputo, Intini & Natile (1995). Inorg. Chem. 34 , 1130–1137] and have the unprecedented Z–anti configuration. The relative orientation of the imino ether ligands is head‐to‐tail.     

Reactivity of Dialumane and “Dialumene” Compounds toward Alkenes

The reactions of dialumane [L(thf)Al? Al(thf)L] ( 1 , L=[{(2,6‐iPr₂C₆H₃)NC(Me)}₂]^2?) with stilbene and styrene afforded the oxidation/insertion products [L(thf)Al(CH(Ph)? CH(Ph))AlL] ( 2 ) and [L(thf)Al(CH(Ph)? CH₂)Al(thf)L] ( 3 ), respectively. In the presence of Na metal, precursor 1 reacted with butadienes, possibly through the reduced “dialumene” or the “carbene‐like” :AlL species, to yield aluminacyclopentenes [LAl(CH₂C(Me)?C(Me)CH₂)Na]_n ( 4 a ) and [Na(dme)₃][LAl(CH₂C(Me)?CHCH₂)] ( 4 b , dme=dimethoxyethane) as [1+4] cycloaddition products, as well as the [2+4] cycloaddition product 1,6‐dialumina‐3,8‐cyclodecadiene, [{Na(dme)}₂][LAl(CH₂C(Me)?C(Me)CH₂)₂AlL] ( 5 ). The possible mechanisms of the cycloaddition reactions were studied by using DFT computations.     

Reactions of coordinated molecules: XLIX. Carboncarbond bond formation between the donor atoms of adjacent acyl and alkenyl ligands

When the ferraenolate anion, (η-C₅H₅)(CO)₂FeC(O)CH₂⁻, is treated sequentially with methyllithium/TMEDA and benzoyl chloride, the known η³-allyl complex, (η-C₅H₅)(OC)Fe{η³-CH₂C[OC(O)Ph]C[OC(O)Ph](CH₃}, is isolated in 36% yield. When the neutral alkenyl complexes, (η-C₅H₅)(CO)₂Fe[C(Me)CH₂] and (η-C₅H₅)(OC)₂Fe{C(OMe)CH₂], were treated sequentially with methyllithium and benzoyl chloride, the η³-allyl complexes, (η-C₅H₅)(OC)Fe{η³-CH₂C(Me)C[OC(O)Ph](Me) and (η-C₅H₅)(OC)Fe{η³-CH₂C(OMe)C[OC(O)Ph](Me) are isolated in 8 and 11% yield, respectively. These η³-allyl ligands are presumably formed via CC coupling of the donor atoms of the formal acyl and alkenyl ligands in the intermediate complexes.     

Areneruthenium(II) Complexes with Functionalized Phosphines Coordinating as Mono‐, Bi‐ or Tridentate Ligands

Areneruthenium(II) compounds [Ru(p‐cym)Cl₂{κ‐P‐ⁱPrP(CH₂CH₂OMe)₂}], 3 , and [Ru(arene)Cl₂{κ‐P‐RP(CH₂CO₂Me)₂}] 4 – 7 (arene=p‐cym (=1‐methyl‐4‐isopropylbenzene), mes (=1,3,5‐trimethylbenzene); R=ⁱPr, ^tBu) were prepared from the dimers [Ru(arene)Cl₂]₂ and the corresponding functionalized phosphine. Treatment of 6 and 7 with 1 equiv. of AgPF₆ affords the monocationic complexes [Ru(mes)Cl{κ²‐P,O‐RP(CH₂C(O)OMe)(CH₂CO₂Me)}]PF₆, 10 and 11 , while the related reaction of 5 – 7 with 2 equiv. of AgPF₆ produces the dicationic compounds [Ru(p‐cym){κ³‐P,O,O‐^tBuP(CH₂C(O)OMe)₂}](PF₆)₂ ( 12 ) and [Ru(mes){κ³‐P,O,O‐RP(CH₂C(O)OMe)₂}](PF₆)₂, 13 and 14 . Partial hydrolysis of one hexafluorophosphate anion of 12 – 14 leads to the formation of [Ru(arene){κ²‐P,O‐RP(CH₂C(O)OMe)(CH₂CO₂Me)}(κ‐O‐O₂PF₂)]PF₆, 15 – 17 , of which 17 (arene=mes; R=^tBu) has been characterized by X‐ray crystallography. Compounds 13 and 14 react with 2 equiv. of KO^tBu in ^tBuOH/toluene to give the unsymmetrical complexes [Ru(mes){κ³‐P,C,O‐RP(CHCO₂Me)(CH=C(O)OMe)}], 18 and 19 , containing both a five‐membered phosphinoenolate and a three‐membered phosphinomethanide ring. The molecular structure of compound 18 has been determined by X‐ray structure analysis. The neutral bis(carboxylate)phosphanidoruthenium(II) complexes [Ru(arene){κ³‐P,O,O‐RP(CH₂C(O)O)₂}], 20 – 23 are obtained either by hydrolysis of 18 and 19 , or by stepwise treatment of 4 and 5 with KO^tBu and basic Al₂O₃. Novel tripodal chelating systems are generated via insertion reactions of 19 with PhNCO and PhNCS.     

Neutrale und kationische Ruthenium(II)-Komplexe mit trifunktionellen Phosphanliganden

Neutral and Cationic Ruthenium(II) Complexes with Trifunctional Phosphane Ligands Compounds of the type [RuCl₂(RPX₂)₂] 4 – 7 (R = iPr, tBu; X = CH₂CH₂OMe, CH₂CO₂Me) were prepared by reacting RPX₂ with either RuCl₃ · 3H₂O or [RuCl₂(PPh₃)₃], respectively. In 4 – 7 the trifunctional phosphanes coordinate as bidentate ligands to the metal center through the phosphorus atom and the oxygen atom of a methoxy or carbonyl group. The lability of the Ru–O bond allows substitution reactions with CO, tert-butylisonitrile and phenylacetylene. The Ru–Cl bonds in 5 (R = tBu; X = CH₂CH₂OMe) can be cleaved upon treatment with one or two equiv of AgPF₆ yielding mono- or dicationic derivatives. In these complexes the ligands are coordinated to the metal center through the phosphorus and both of the oxygen donor atoms. The reaction of the phosphinoesterenolate compound 17 with Ph₂C=C=O leads to the insertion of two molecules of the ketene into the C–H bond of one of the five-membered metal-enolate rings to yield the “expanded” chelate complex 18 , the structure of which was determined by X-ray crystallography.     

Neutral and Cationic β‐Ketoiminato Bismuth Complexes

The first examples of neutral and cationic bismuth complexes bearing β‐ketoiminato ligands were isolated by employing salt metathesis route. BiCl₃ reacts with [O=C(Me)]CH[C(Me)N(K)Ar] ( 1 ) resulting in a homoleptic β‐ketoiminato bismuth complex Bi[{O=C(Me)}CH{C(Me)NAr}]₃ ( 2 ). The reaction between BiCl₃ and [(CH₂)₂{N(K)C(Me)CHC(Me)=O}₂] ( 3 ) leads to the formation of a cationic bismuth complex [Bi{(CH₂)₂(NC(Me)CHC(Me)=O)₂}]₄[Bi₂Cl₁₀] ( 4 ).     

Synthesis of polycarbonates using a cationic zirconocene complex

The cationic alkyl zirconocene complex Cp₂Zr⁺Me[CH₃B⁻(C₆F₅)₃] is found to initiate the ringopening polymerization of 1,5,7,11-tetraoxaspiro[5,5]undecane under mild condition to give poly(oxypropylenepropylenecarbonate) with low polydispersity. The rate of the polymerization is first-order with respect to monomer and catalyst concentration. At high monomer concentration, the initial rate of polymerization becomes zero-order with respect to monomer concentration.     

SYNTHESIS AND POLYMERIZATION OF OLIGO (OXYETHYLENE) MACROMONOMER

This paper reports the synthesis of methoxyoligo (oxyethylene) methacrylate (MEO_n , n is the repeating unit number of (CH_2CH_2O) in the macromonomer), and its polymerization in different solvents. MEO_n is prepared through such two independent reactions as (1) anionic polymerization of oxirane initiated by potassium alkoxide and (2) end-capping of methoxy oligo(oxyethylene) by methacrylic group. The n value can be conveniently controlled over the range of 5 ～30 by varying the molar ratio of oxirane to initiator and the molecular weight distribution of MEO_n be narrowed by increasing reaction time only in step (1). MEO_n thus obtained shows a rapid polymerization in water and benzene respectively, and both give water-soluble polymers as long as suitable conditions are used.     

Synthesis of linear and branched polyketones from the Rh complex catalyzed living alternating copolymerization of (4‐alkylphenyl)allene with CO

Copolymerization of (4‐hexylphenyl)allene and of (4‐dodecylphenyl)allene with carbon monoxide (1 atm) catalyzed by Rh[η³‐CH(Ar′)C{C(CHAr′)CH₂C (CHAr′)CH₂CH₂CHCHAr′}CH₂](PPh₃)₂ (A; Ar′ = C₆H₄OMe‐p) gives the corresponding polyketones: I‐[—CO—C(CHAr)—CH₂—]_n [1: Ar = C₆H₄C₆H₁₃‐p, 2 : Ar = C₆H₄C₁₂H₂₅‐p; I = CH₂C(CHAr′)C(CHAr′)CH₂C(CHAr′)CH₂CH₂CHCHAr′]. Molecular weights of the polyketone prepared from (4‐hexylphenyl)allene and CO are similar to the calculated from the monomer to initiator ratios until the molecular weight reaches to 45,000, indicating the living polymerization. Melting points of the polyketones I‐[—CO—C(CHC₆H₄R‐p)—CH₂—]_n (n = ca. 100) increase in the order R = C₁₂H₂₅ < C₆H₁₃ < C₄H₉ < CH₃ < H. Block and random copolymerization of phenylallene and (4‐alkylphenyl)allene with carbon monoxide gives the new copoly‐ ketones. The polymerization of a mixture of (4‐methylphenyl)allene and smaller amounts of bis(allenyl)benzene under CO afforded the polyketone with a crosslinked structure. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1505–1511, 2000