棒状CuFe4Ox的可控合成及其异戊醇脱氢反应的催化性能

利用液相沉淀法可控合成了均匀的棒状CuFe₄O_x催化剂。通过原位X射线粉末衍射（XRD）、高分辨透射电子显微镜（TEM）及程序升温还原（TPR）等手段表征其晶相结构、形貌和还原性能。通过还原棒状CuFe₄O_x获得Cu⁰/Fe₃O₄ 纳米棒,原位X射线光电子能谱（XPS）用于确定Cu⁰/Fe₃O₄ 表面的相组成。通过液相沉淀法制备棒状CuFe₄O_x,在120℃保持3 h后加入Na₂CO₃溶液至pH等于9时所得棒状形貌最为规整。以异戊醇脱氢反应作为探针反应,比较了Cu⁰/Fe₃O₄ 纳米棒和Cu⁰/Fe₃O₄ 纳米颗粒的催化反应性能,发现Cu⁰/Fe₃O₄ 纳米棒比Cu⁰/Fe₃O₄ 纳米粒子具有更好的活性和稳定性,表明棒状Fe₃O₄ 担载的Cu纳米粒子具有更好的结构稳定性。     

棒状CuFe4Ox的可控合成及其异戊醇脱氢反应的催化性能

利用液相沉淀法可控合成了均匀的棒状CuFe₄O_x催化剂。通过原位X射线粉末衍射（XRD）、高分辨透射电子显微镜（TEM）及程序升温还原（TPR）等手段表征其晶相结构、形貌和还原性能。通过还原棒状CuFe₄O_x获得Cu⁰/Fe₃O₄纳米棒,原位X射线光电子能谱（XPS）用于确定Cu⁰/Fe₃O₄表面的相组成。通过液相沉淀法制备棒状CuFe₄O_x,在120℃保持3 h后加入Na₂CO₃溶液至pH等于9时所得棒状形貌最为规整。以异戊醇脱氢反应作为探针反应,比较了Cu⁰/Fe₃O₄纳米棒和Cu⁰/Fe₃O₄纳米颗粒的催化反应性能,发现Cu⁰/Fe₃O₄纳米棒比Cu⁰/Fe₃O₄纳米粒子具有更好的活性和稳定性,表明棒状Fe₃O₄担载的Cu纳米粒子具有更好的结构稳定性。     

Cu2O立方体的快速制备及模板法制备CuxS纳米笼子

首先以NaBH₄作为强还原剂在CuSO₄溶液中快速形成Cu₂O晶核, 然后以葡萄糖为温和的还原剂和保护剂, 由晶核生长成Cu₂O立方体, 并以其为模板制备中空的球状Cu_xS纳米笼子. 利用透射电子显微镜(TEM), 扫描电子显微镜(SEM), X射线衍射仪(XRD)和紫外-可见(UV-Vis)分光光度计对产物进行表征. 葡萄糖和铜盐的物质的量的比、加热状况、pH等反应条件影响Cu₂O的形貌. Cu_xS纳米笼子的外壳厚度由参与反应的Cu₂O和Na₂S的物质的量的比决定.     

Fe2O3含量对Cu-Fe/铝土矿水煤气变换催化剂结构和性能的影响

利用具有高比表面积和介孔结构的改性铝土矿为载体,采用并流共沉淀法制备不同Fe₂O₃含量的Cu-Fe/铝土矿催化剂。以水煤气变换反应为探针反应,考察了催化剂性能。利用X射线荧光元素分析(XRF)、X射线粉末衍射(XRD)、H₂程序升温还原(H₂-TPR)、CO程序升温脱附(CO-TPD)和X射线光电子能谱(XPS)等对催化剂进行了表征。结果表明:负载的Fe₂O₃能显著提高CuO/改性铝土矿催化剂的水煤气变换活性特别是热稳定性能,且随负载的Fe₂O₃含量增加而提高,当负载量为20%时达到最佳。其原因是负载的Fe₂O₃和CuO之间发生了相互作用,形成了类似于CuFe₂O₄复合氧化物,且随负载的Fe₂O₃含量的增加而增强,这种相互作用同时促进了CuO和Fe₂O₃的还原,抑制了CuO的烧结,进而提高了催化剂的性能。     

预处理气氛对CuO/CeO2/γ-Al2O3催化剂表面性质及“NO+CO”反应性能的影响

用不同的预处理气氛制备了CeO₂/γ-Al₂O₃载体以调节表面Ce的价态,并以Cu(CH₃COO)₂为前驱体制备了CuCeAl催化剂。XRD和H₂-TPR的结果表明在还原气氛下处理的CeO₂/γ-Al₂O₃载体具有更多的活性氧原子,因此相应的CuCeAl催化剂表面有更多分散态的Cu²⁺/Cu⁺物种。NO+CO反应的结果表明分散态的Cu²⁺/Cu⁺是NO转化的活性物质,而Cu⁰在低温下具有较好的N₂选择性。因此,同时含有分散态Cu²⁺/Cu⁺和少量晶相Cu⁰的催化剂具有最好的催化性能。     

脉冲沉积制备Cu2O/TiO2纳米管异质结的可见光光催化性能

在用阳极氧化法制备有序排列TiO₂纳米管阵列薄膜的基础上,引入脉冲沉积工艺,成功实现了均匀、弥散分布的Cu₂O纳米颗粒修饰改性TiO₂纳米管阵列,形成Cu₂O/TiO₂ 纳米管异质结复合材料. 利用场发射扫描电镜（FESEM）、场发射透射电镜（FETEM）、X射线衍射（XRD）、X射线光电子能谱（XPS）和紫外-可见漫反射光谱（UV-Vis DRS）对样品进行表征,重点研究了Cu₂O/TiO₂ 纳米管异质结的光电化学特性和对甲基橙（MO）的可见光催化降解性能. 结果表明,Cu₂O纳米颗粒均匀附着在TiO₂纳米管阵列的管口和中部位置,所制备的Cu₂O/TiO₂ 纳米管异质结具有高效的可见光光催化性能;在浓度为0.01 mol·L^-1的CuSO₄溶液中制得的Cu₂O/TiO₂纳米管异质结表现出最好的电化学特性和光催化性能;另外,对Cu₂O纳米颗粒影响光催化活性的机理进行了讨论.     

Cu-Sn-P-LiMn2O4纳米复合材料镀层的XPS和AES研究

采用化学复合镀技术，在Q₂₃₅碳钢片表面制备了Cu-Sn-P-LiMn₂O₄纳米复合材料镀层。用扫描电子显微镜(SEM)观察外貌；称重法测定厚度；通过5% NaCl溶液、1% H₂S气体加速腐蚀试验、抗粘性试验及室温氧化试验等多种手段测定其性能。用X-射线光电子能谱(XPS)及俄歇电子能谱(AES)测定其价态及组成。结果表明:Cu-Sn-P-LiMn₂O₄纳米复合材料镀层的性     

Mn2O3纳米结构的简易合成与电化学性质

用简易的室温或水热方法制备出不同形貌的MnCO₃微结构。经600 ℃热处理后,室温制备MnCO₃转变成Mn₂O₃胶体片,而水热制备MnCO₃样品则形成多孔Mn₂O₃纳米结构。然而,室温制备MnCO₃经120 ℃热处理后形成Mn₂O₃晶相。制备样品经过XRD和SEM表征表明,热处理MnCO₃前驱物形成Mn₂O₃过程导致产物形貌与结构变化。其形成机理又通过TEM和FTIR进一步研究。Mn₂O₃纳米结构的电容性质通过循环伏安法表征,结果表明Mn₂O₃形貌与结构对其电容有重要影响。     

CuO/Sn0.8Ti0.2O2催化剂的表征及对NO+CO反应活性研究

Reducibility and characteristics of CuO/Sn_0.8Ti_0.2O₂ catalysts were examined by using a microreactor-GC NO+CO reaction system, BET, TG-DTA, FTIR, XRD and H2-TPR techniques. CuO/Sn_0.8Ti_0.2O₂ had high activity in NO+CO reaction, showing 93% NO conversion at 300 ℃ in air, and 100% NO conversion at 225 ℃ after H₂ pretreatment. The pore size distribution of Sn_0.8Ti_0.2O₂ was mainly as micro-pores and meso-pores (1~5 nm), and the specific surface area and total pore volume of Sn_0.8Ti_0.2O₂ were 69 m²·g^-1 and 0.15 cm³·g^-1, respectively. As shown by XRD analysis, there was no CuO crystal diffraction peak at 9%CuO loading, but two CuO crystal diffraction peaks at 2θ 35.5° and 38.7° were present at 12% CuO loading. FTIR detected the adsorption of NO and CO on the surface of reduced 12%CuO/Sn_0.8Ti_0.2O₂. The Cu²⁺ sites and support surface adsorbed NO, and the process of NO adsorption led to the formation of N₂O and NO₃^-. In contrast, the Cu⁺、Cu⁰ sites and support surface adsorbed CO, and when the mixed gases of NO and CO were adsorbed by support surface, no NO₃^- was formed. H₂-TPR showed four reduction peaks (α, β, γ and δ). The α, β and γ peaks were the reductions of CuO species, and the δ peak was the reduction of Sn_0.8Ti_0.2O₂.     

MO(M=Cu和Ni)/TiO2/γ-Al2O3催化剂在CO+O2反应中的活性

采用X射线衍射(XRD)，程序升温还原(TPR)等表征手段考察了TiO₂改性对CuO(或NiO)在γ-Al₂O₃表面上分散以及还原性能的影响，同时检测了这些改性的催化剂在CO+O₂反应中的活性。结果表明:TiO₂的改性使得CuO和NiO在γ-Al₂O₃载体上的分散复杂化，产生了多种状态的氧化铜(氧化镍)物种。当负载量低于其在γ-Al₂O₃上的分散容量(0.56 mmol Ti⁴⁺/100 m² γ-Al₂O₃)时，TiO₂的加入主要是抑制了CuO和NiO在γ-Al₂O₃载体上的分散;而当负载量远大于其分散容量时，出现了CuO和NiO在晶相TiO₂(锐钛矿)上的分散。无论其负载量如何，TiO₂的加入促进了CuO的还原。因此，在250 ℃的CO+O₂反应中，改性的催化剂中具有更多的活性位，因而显示出更高的活性;相反，TiO₂的改性则抑制了NiO的还原。因此，在350 ℃的CO+O₂反应中，可还原的氧化镍的量明显少于未经改性的催化剂，导致改性催化剂的活性降低。     

ZrO_2-Al_2O_3复合氧化物的合成及其性能研究

采用表面活性剂改性的沉淀法合成了系列掺杂钇、镧、钡的氧化锆铝复合氧化物。通过XRD、XRF、低温N2吸附和CO脉冲化学吸附等手段考察了表面活性剂、助剂、焙烧温度对复合材料结构、孔结构以及负载0.5%铑催化剂的分散性能等的影响。研究表明:与采用常规沉淀法合成的氧化锆铝复合氧化物相比,添加表面活性剂合成的样品具有更大的比表面积、孔容和适合的孔径分布。分别或同时掺杂La、Ba、Y合成的氧化锆铝复合氧化物都能抑制氧化铝的α相变,提高复合材料和催化剂表面金属Rh的高温抗烧结能力,特别是同时掺杂La、Ba、Y合成的Rh/LBYZA样品经1100℃4h焙烧后仍有17.82%的金属分散度。以LBYZA为载体制备的新鲜催化剂(600℃4h焙烧样品)在CO选择还原NO反应中NO和CO的起燃温度分别为240、243℃,完全燃烧温度分别为273、280℃,表现出较高的催化活性。     

Crystal chemistry of Co-doped Zn7Sb2O12

Zn₇Sb₂O₁₂ forms a full range of Co-containing α solid solutions, Zn_7−xCo_xSb₂O₁₂, with an inverse-spinel structure at high temperature. At low temperatures for x<2, the solid solutions transform into the low temperature β-polymorph. For x=0, the β→α transition occurs at 1225±25 °C; the transition temperature decreases with increasing x. At high x and low temperatures, α solid solutions are formed but are non-stoichiometric; the (Zn+Co):Sb ratio is >7:2 and the compensation for the deficiency in Sb is attributed to the partial oxidation of Co²⁺ to Co³⁺. From Rietveld refinements using ND data, Co occupies both octahedral and tetrahedral sites at intermediate values of x, but an octahedral preference attributed to crystal field stabilisation, causes the lattice parameter plot to deviate negatively from the Vegard's law. Sub-solidus compatibility relations in the ternary system ZnO-Sb₂O₅-CoO have been determined at 1100 °C for the compositions containing ?50% Sb₂O₅.     

合成方法对Rh/CeO2-ZrO2-La2O3催化剂的结构、表面性能及DeNOx活性的影响

用沉积沉淀法合成两种不同系列的CeO2-ZrO2-La2O3混合氧化物(ZrO2和La2O3沉积CeO2粒子(标记为A-x)以及CeO2和La2O3沉积ZrO2粒子(标记为B-x)),并用作Rh催化剂的载体。XRD、拉曼、TPR、XPS和O2脉冲等表征结果显示出不同的沉积顺序将导致不同的结构和氧化还原性能,且B-x具有更高的氧迁移性、储氧能力和表面Ce浓度。当其负载Rh后,Rh/B-x催化剂具有更高的NO和CO转化率及N2选择性,且Ce的最佳含量为50at%。这可能归因于Rh负载于富铈表面形成更多有利于NO分解的表面Ce3+活性位。     

Preparation and characterization of mesoporous TiO2-CeO2 nanopowders respond to visible wavelength

Mesoporous TiO₂-CeO₂ nanopowders responding to visible wavelength were synthesized by using a surfactant assisted sol-gel technique. They were obtained using metal alkoxide precursors modified with acetylacetone (ACA) and laurylamine hydrochloride (LAHC) as surfactant. The samples were characterized by XRD, nitrogen adsorption isotherm, SEM, TEM, and selected area electron diffraction (SAED), respectively. The 95 mol% TiO₂-5 mol% CeO₂ system yielded single anatase phase, however, further addition of the CeO₂ formed cubic CeO₂ structure while anatase TiO₂ decreased. Additions of 5 and 10 mol% CeO₂ increased the surface area, but those of 25, 50, and 75 mol% CeO₂ did not affect it very much. By using this mixed metal oxides system, TiO₂ can be modified to respond to the visible wavelength. The mixed metal oxides had catalytic activity (evaluating the formation rate of I₃⁻) about 2-3 times higher than pure CeO₂, while nanosize anatase type TiO₂ materials had no catalytic activity under visible light. The catalytic activity was almost proportional to the specific surface area. The formation rate of I₃⁻ was much improved by changing the calcination temperature and calcination period. Highest catalytic activity in this study was obtained for the 50 mol% TiO₂-50 mol% CeO₂ nanopowders calcined at 250 °C for 24 h.     

Li2O-TiO2-SiO2-P2O5和Li2O-TiO2-Al2O3-P2O5体系锂离子固体电解质的制备及性能研究

一些具有NASICON型网格结构的固体电解质具有高的电导率和好的稳定性,NASICON的意思是Na Super Ionic Conductor[1]。当NaZr2(PO4)3中P5 被Si4 部分取代时便可以得到具有NASICON结构的Na1 xZr2SixP3-xO12体系,其具有高的钠离子电导率。然而有相同结构的Li1 xZr2SixP3-xO12体系的离子电导率却很低,这是因为Li 半径太小,而NASICON三维网格结构的离子通道太大,两者不匹配而使电导率下降[2]。但当LiZr2(PO4)3中Zr4 被离子半径小些的Ti4 取代,所得LiTi2(PO4)3的通道就与Li 半径相匹配,适合于锂离子的迁移,从而使其电导率…     

Ba2In2O4(OH)2: Proton sites, disorder and vibrational properties

The structure of Ba₂In₂O₄(OH)₂ is analysed by the explicit full optimization of a large number of possible proton arrangements using periodic density functional theory. It is shown that the experimental assignments in which protons appear to be located at high symmetry positions with unphysical bond lengths do not correspond to minima on the potential energy hypersurface. The apparent sites are averages of a number of possible proton locations involving a set of possible local structural environments in which the internuclear separations are more realistic. Such problems with structural refinements are common where profile refinement programs place the atoms at the average position due to dynamic and/or static disorder. Thus while the calculations support a previous neutron diffraction analysis of the structure in that the average structure contains two different proton sites, they also reveal substantial information about the local environments of the protons. In all optimizations, the protons moved from the average positions suggested in the neutron diffraction study with calculated O–H and OHO distances consistent with those observed in other oxides. The energies of different proton distributions vary significantly so the protons are not randomly distributed. We also present an analysis of the vibrational properties of the O–H bonds. Since the strength of the hydrogen bonds is closely related to the local structural environments of the protons, a range of vibrational frequencies is obtained providing a prediction of the vibrational spectra. In O–HO linkages, O–H stretching modes soften with increasing HO hydrogen bond strength, while the in-plane and out-of-plane bending or libration modes stiffen. Together, our results show how modern theoretical methods can provide a clearer understanding of the structure and dynamics of a complex inorganic material.     

Preparation and photocatalytic activity of ZnO/TiO2/SnO2 mixture

ZnO/TiO₂/SnO₂ mixture was prepared by mixing its component solid oxides ZnO, TiO₂ and SnO₂ in the molar ratio of 4?1?1, followed by calcining the solid mixture at 200-1300 °C. The products and solid-state reaction process during the calcinations were characterized with powder X-ray diffraction (XRD), thermogravimetric and differential thermal analysis (TG-DTA), UV-Vis diffuse reflectance spectroscopy (UV-Vis DRS) and Brunauer-Emmett-Teller measurement of specific surface area. Neither solid-state reaction nor change of crystal phase composition took place among the ZnO, TiO₂ and SnO₂ powders on the calcinations up to 600 °C. However, formation of the inverse spinel Zn₂TiO₄ and Zn₂SnO₄ was detected at 700-900 and 1100-1200 °C, respectively. Further increase of the calcination temperature enabled the mixture to form a single-phase solid solution Zn₂Ti_0.5Sn_0.5O₄ with an inverse spinel structure in the space group of . The ZnO/TiO₂/SnO₂ mixture was photocatalytically active for the degradation of methyl orange in water; its photocatalytic mass activity was 16.4 times that of SnO₂, 2.0 times that of TiO₂, and 0.92 times that of ZnO after calcination at 500 °C for 2 h. But, the mass activity of the mixture decreased with increasing the calcination temperature at above 700 °C because of the formation of the photoinactive Zn₂TiO₄, Zn₂SnO₄ and Zn₂Ti_0.5Sn_0.5O₄. The sample became completely inert for the photocatalysis after prolonged calcination at 1300 °C (42 h), since all of the active component oxides were reacted to form the solid solution Zn₂Ti_0.5Sn_0.5O₄ with no photocatalytic activity.     

Rapid Synthesis of Nanocrystalline TiO2/SnO2 Binary Oxides and Their Photoinduced Decomposition of Methyl Orange

A rapid and simple method, the so-called stearic acid method (SAM) was developed to prepare nanostructured TiO₂/SnO₂ binary oxides by combustion of stearic acid precursors. The preparative process was studied by Fourier transform infrared spectroscopy (FT-IR). During the preparative process, metal precursors were dispersed in stearic acid at molecular level. Microstructure of the samples was investigated by X-ray diffraction (XRD), transmission electron microscopy (TEM), BET specific surface area measurement and the results were compared with those obtained by conventional sol-gel method. The photocatalytic decomposition of methyl orange was used as a model system to determine the relative influences of the preparation method and the concentration of SnO₂ on the photocatalytic activities. It was found that preparative methods affected the crystalline structure of TiO₂/SnO₂ powders and the anatase phase of TiO₂ was stabilized by the addition of SnO₂ in SAM. The samples prepared by SAM showed better dispersity, larger specific surface area and the TiO₂/SnO₂ (r=0.15, SAM) catalyst showed higher photocatalytic activity than Degussa P25.     

CuO/Ti0.5Zr0.5O2催化剂对NO+CO反应的催化作用

环境治理是当今社会面临的一大主要问题。目前,城市空气污染日趋严重,特别是工厂和汽车排放的大量未燃烧的烃类、CO、NOx是主要的空气污染物。其中,氮氧化物(NOx)排放状况尤其严重,它的排放会给环境和人们生活带来严重危害,因此,如何有效地消除NOx已成为目前环境保护中一个非常     

First-principles study of O2 adsorption and dissociation on the CuCr2O4 (100) surface

The adsorption and dissociation of molecular oxygen on spinel CuCr₂O₄ (100) surface were carried out by first-principles calculations based on density functional theory (DFT). The calculated results indicate that the Cr site is most favorable for atomic oxygen adsorption, with an adsorption energy of 402.8 kJ/mol. For molecular oxygen adsorption, there are three types of favorable interaction modes: O₂ forms bonds with the Cu site or O₂ binds to two Cr sites or O₂ interacts with both Cu and Cr sites simultaneously. The lowest activation energy (E_a = 35.4 kJ/mol) was found through exploring possible reaction pathways for O₂ dissociation. The relationship between E_a and reaction enthalpy (ΔH) for O₂ dissociation adsorption reactions fits Brønsted-Evans-Polanyi (BEP) behavior.