Effect of metal cations on polydiacetylene Langmuir films

Polydiacetylene (PDA) Langmuir films (LFs) are a unique class of materials that couple a highly aligned conjugated backbone with tailorable pendant side groups and terminal functionalities. The films exhibit chromatic transitions from monomer to blue polymer and finally to a red phase that can be activated optically, thermally, chemically, and mechanically. The properties of PDA LFs are strongly affected by the presence of metal cations in the aqueous subphase of the film due to their interaction with the carboxylic head groups of the polymer. In the present study the influence of divalent cadmium, barium, copper, and lead cations on the structural, morphological, and optical properties of PDA LFs was investigated by means of surface pressure-molecular area (π-A) isotherms, atomic force microscopy, optical absorbance, and Raman spectroscopy. The threshold concentrations for the influence of metal cations on the film structure, stability, and phase transformation were determined by π-A analyses. It was found that each of the investigated cations has a unique influence on the properties of PDA LFs. Cadmium cations induce moderate phase transition kinetics with reduced domain size and fragmented morphology. Barium cations contribute to stabilization of the PDA blue phase and enhanced linear strand morphology. On the other hand, copper cations enhance rapid formation of the PDA red phase and cause fragmented morphology of the film, while the presence of lead cations results in severe perturbation of the film with only a small area of the film able to be effectively polymerized. The influence of the metal cations is correlated with the solubility product (K(sp)), association strength, and ionic-covalent bond nature between the metal cations and the PDA carboxylic head groups.     

Langmuir and Langmuir-Blodgett films of amphiphilic bistable rotaxanes

A series of amphiphilic bistable [2]rotaxanes--in which a ring-shaped component, the tetracationic cyclophane, cyclobis(paraquat-p-phenylene), has been assembled around two recognition sites, a tetrathia-fulvalene (TTF) unit and a 1,5-dioxynaphthalene (DNP) ring system, situated apart at different strategic locations within the central polyether section of an amphiphilic dumbbell component that is terminated by a hydrophobic tetraarylmethane-based stopper (near the TTF unit) at one end and by a hydrophilic tetraarylmethane-based stopper (near the DNP ring system) at the other end--has been designed and synthesized. The effects of systematic changes in the constitutions of the three ethylene glycol tails (diethylene or tetraethylene glycol) and end groups (hydroxyl or methoxyl functions) attached to the hydrophilic stoppers on Langmuir film balance and surface rheology experiments at 20 degreesC were examined to determine the monolayer stabilities and co-conformations of the [2] rotaxanes and their free dumbbell counterparts. These experiments allow us to propose a model for the rotaxane's structures at different surface pressures. All the [2]rotaxanes form stable Langmuir films. These films typically pass from a liquid-expanded region to a liquid-condensed region. The transition between the two regions was either directly observed or ascertained using film stability experiments. Film balance and surface rheology experiments showed that the addition of the tetracationic cyclophane component and hydroxyl end groups markedly increased the stabilities and viscoelasticity of the films.     

Photoreactions and lateral patterning in Langmuir and Langmuir-Blodgett films

Reversible morphological changes occur with photoisomerization of azobenzene in Langmuir-Blodgett (LB) films complexed with polycations, which contradicts an implicit assumption of the concept of free volume that two-dimensional film structures are preserved during the photoisomerization. J-aggregates of chromophores are formed by two processes. The first process is "light-induced J-aggregation" in which photoisomerized molecules form J-aggregates. The other process is "triggered J-aggregation," in which photoisomerization of one of the components triggers J-aggregation of another chemical species in the mixed films. Both processes of J-aggregation are in many cases accompanied by large morphological changes of the films. However, LB films fabricated using processes under isobaric conditions do not change their morphology during light-induced J-aggregation and are patterned with J-aggregates using ultraviolet illumination through a photomask. Phase separation in mixed LB films gives rise to two-dimensional patterns, which are used to fabricate templates by using an amphiphilic silane-coupling agent as one of the components in the mixed LB films. Nanopatterns are also fabricated.     

Amphiphilic diblock dendrimers: synthesis and incorporation in Langmuir and Langmuir-Blodgett films

A new dendron with peripheral long alkyl chains and containing five C(60) units in the branching shell has been prepared and attached to a Fréchet-type dendron functionalized with ethylene glycol chains. The peripheral substitution of the resulting globular dendrimer with hydrophobic chains on one hemisphere and hydrophilic groups on the other provides the perfect hydrophobic/hydrophilic balance allowing the formation of stable Langmuir films. Furthermore, a perfect reversibility has been observed in successive compression/decompression cycles. The diblock structure of the dendrimer has been also crucial for the efficient transfer of the Langmuir films in order to obtain well-ordered multilayered Langmuir-Blodgett films. This approach appears particularly interesting since functional groups not well adapted for the preparation of Langmuir and Langmuir-Blodgett films such as fullerenes can be attached into the branching shell of the dendritic structure and, thus, efficiently incorporated in thin ordered films.     

Self-organization of a sulfonamido-porphyrin in Langmuir monolayers and Langmuir-Blodgett films

Langmuir monolayers (LM) and Langmuir-Blodgett (LB) films of pure lipophilic meso-tetra(4-dodecylaminosulfophenyl)porphyrin (PC12) and mixed with the anionic surfactant sodium hexadecylsulfate (SHS) were studied. The molecular packing and structure of PC12 and PC12-4SHS with variable surface pressure were investigated by surface pressure-area measurements, steady-state absorption, fluorescence emission and anisotropy, as well as by fluorescence lifetime imaging microscopy (FLIM). At low surface pressure, the porphyrin molecules are organized with the rings tilted on the water surface whereas at high surface pressure the porphyrin rings achieve a more perpendicular arrangement. Using the FLIM images a gradual change of aggregates into large "islands" is observed. Different patterns are observed in the pure PC12 multilayer films (n = 3 and 5) with ordered patches superimposed which are not observed in the PC12-4SHS multilayer LB films.     

Langmuir and Langmuir-Blodgett films of a novel tryptophan peptide lipid

A novel tryptophan peptide lipid, C18H35O (SA)-Gly-Trp-Gly-OH, was synthesized and studied for its surface chemistry and spectroscopic properties.     

Study of Langmuir and Langmuir-Blodgett films of odorant-binding protein/amphiphile for odorant biosensors

To make ultrathin films for the fabrication of artificial olfactory systems, odorant biosensors, we have investigated mixed Langmuir and Langmuir-Blodgett films of odorant-binding protein/amphiphile. Under optimized experimental conditions (phosphate buffer solution, pH 7.5, OBP-1F concentration of 4 mg L(-1), target pressure 35 mN m(-1)), the mixed monolayer at the air/water interface is very stable and has been efficiently transferred onto gold supports, which were previously functionalized by self-assembled monolayers (SAMs) with 1-octadecanethiol (ODT). Atomic force microscopy and electrochemical impedance spectroscopy were used to characterize mixed Langmuir-Blodgett (LB) films before and after contact with a specific odorant molecule, isoamyl acetate. AFM phase images show a higher contrast after contact with the odorant molecule due to the new structure of the OBP-1F/ODA LB film. Non-Faradaic electrochemical spectroscopy (EIS) is used to quantify the effect of the odorant based on the electrical properties of the OBP-1F/ODA LB film, as its resistance strongly decreases from 1.18 MOmega (before contact) to 25 kOmega (after contact).     

Langmuir and Langmuir-Blodgett films of proline-rich N-terminal domain peptide of gamma-zein

The proline-rich N-Terminal domain peptides of γ-zein (VHLPPP)_n with n = 1 and 3 (peptides I and II) are shown to form stable Langmuir films at air/water interface and the films have been characterized using surface pressure–molecular area (π–A), surface potential–molecular area (ΔV–A) isotherms, respectively. The longer peptide sequence does not show dramatic increase in surface or interfacial properties suggesting that the minimum length of n = 1 is sufficient to achieve the necessary surface properties. Brewster angle micrographs also agreed with these results. The high surface-active nature of the peptide suggests a fairly non-polar character at air/water interface and at solid/air interface when coated expresses a high surface energy.

Additives such as isopropyl alcohol (IPA) and polyvinyl alcohol (PVA) with the peptides showed more homogenous films at the air/water interface and also improved mechanical and tensile properties. The organized assembly of peptide I at the air/water and solid/air interface suggests that even thin layer of the peptide could play an important role in coating the inner surface of protein body membrane in storage proteins. Composite films of such short peptides with biocompatible polymers may find applications as surface coatings and in biomaterials.     

Formation of complex Langmuir and Langmuir-Blodgett films of water soluble rosebengal

This communication reports the formation of complex Langmuir monolayer at the air-water interface by charge transfer types of interaction with the water soluble N-cetyl N,N,N-trimethyl ammonium bromide (CTAB) molecules doped with rosebengal (RB), with the stearic acid (SA) molecules of a preformed SA Langmuir monolayer. The reaction kinetics of the formation of RB-CTAB-SA complex monolayer was monitored by observing the increase in surface pressure with time while the barrier was kept fixed. Completion of interaction kinetics was confirmed by FTIR study. This complex Langmuir films at the air-water interface was transferred onto solid substrates at a desired surface pressure to form multilayered Langmuir-Blodgett films. Spectroscopic characterizations reveal some molecular level interactions as well as formation of microcrystalline aggregates depending upon the molar ratios of CTAB and RB within the complex LB films. Presence of two types of species in the complex LB films was confirmed by fluorescence spectroscopy.     

Using phospholipid Langmuir and Langmuir-Blodgett films as matrix for urease immobilization

The immobilization of enzymes in organized two-dimensional matrices is a key requirement for many biotechnological applications. In this paper, we used the Langmuir-Blodgett (LB) technique to obtain controlled architectures of urease immobilized in solid supports, whose physicochemical properties were investigated in detail. Urease molecules were adsorbed at the air-water interface and incorporated into Langmuir monolayers of the phospholipid dipalmitoyl phosphatidyl glycerol (DPPG). Incorporation of urease made DPPG monolayers more flexible and caused the reduction of the equilibrium and dynamic elasticity of the film. Urease and DPPG-urease mixed monolayers could be transferred onto solid substrates, forming LB films. A close packing arrangement of urease was obtained, especially in the mixed LB films, which was inferred with nanogravimetry and electrochemistry measurements. From the blocking effect of the LB films deposited onto indium tin oxide (ITO) substrates, the electrochemical properties of the LB films pointed to a charge transport controlled by the lipid architecture.     

Phthalocyanines in Langmuir and Langmuir-Blodgett films: from molecular design to supramolecular architecture

A short review is given on Langmuir and Langmuir-Blodgett films containing phthalocyanine derivatives. A particular emphasis is directed towards the molecular parameters that can be clearly related to the supramolecular architecture observed at the air-water interface and within the LB multilayers. Several examples concerning both edge-on and flat-lying phthalocyanine derivatives are discussed.     

Supramolecular architecture in Langmuir and Langmuir-Blodgett films incorporating a chiral azobenzene

This article describes the synthesis and fabrication of Langmuir and Langmuir-Blodgett (LB) films incorporating a chiral azobenzene derivative, namely, ( S)-4- sec-butyloxy-4'-[5'-(methyloxycarbonyl)pentyl-1'-oxy]azobenzene, abbreviated as AZO-C4(S). Appropriate conditions for the fabrication of monolayers of AZO-C4(S) at the air-water interface have been established, and the resulting Langmuir films have been characterized by a combination of surface pressure and surface potential versus area per molecule isotherms, Brewster angle microscopy, and UV-vis reflection spectroscopy. The results indicate the formation of an ordered trilayer at the air-water interface with UV-vis reflection spectroscopy showing a new supramolecular architecture for multilayered films as well as the formation of J aggregates. Films were transferred onto solid substrates, with AFM revealing well-ordered multilayered films without 3D defects. Infrared and UV-vis absorption spectroscopy indicate that the supramolecular architecture may be favored by the formation of H bonds between acid groups in neighboring layers and pi-pi intermolecular interactions. Circular dichroism spectra reveal chiro-optical activity in multilayered LB films.     

Langmuir and Langmuir-Blodgett films of multifunctional, amphiphilic polyethers with cholesterol moieties

Langmuir films of multifunctional, hydrophilic polyethers containing a hydrophobic cholesterol group (Ch) were studied by surface pressure-mean molecular area (π-mmA) measurements and Brewster angle microscopy (BAM). The polyethers were either homopolymers or diblock copolymers of linear poly(glycerol) (lPG), linear poly(glyceryl glycidyl ether) (lPGG), linear poly(ethylene glycol) (lPEG), or hyperbranched poly(glycerol) (hbPG). Surface pressure measurements revealed that the homopolymers lPG and hbPG did not stay at the water surface after spreading and solvent evaporation, in contrast to lPEG. Because of the incorporation of the Ch group in the polymer structure, stable Langmuir films were formed by Ch-lPG(n), Ch-lPGG(n), and Ch-hbPG(n). The Ch-hbPG(n), Ch-lPEG(n), Ch-lPEG(n)-b-lPG(m), Ch-lPEG(n)-b-lPGG(m), and Ch-lPEG(n)-b-hbPG(m) systems showed an extended plateau region assigned to a phase transition involving the Ch groups. Typical hierarchically ordered morphologies of the LB films on hydrophilic substrates were observed for all Ch-initiated polymers. All LB films showed that Ch of the Ch-initiated homopolymers is able to crystallize. This strong tendency of self-aggregation then triggers further dewetting effects of the respective polyether entities. Fingerlike morphologies are observed for Ch-lPEG(69), since the lPEG(69) entity is able to undergo crystallization after transfer onto the silicon substrate.     

Structural characterization and properties of an azopolymer arranged in Langmuir and Langmuir-Blodgett films

The fabrication of Langmuir and Langmuir-Blodgett (LB) films of an acid-azopolymer (PAzCOOH) is reported. Several techniques were used in their characterization: surface pressure (pi) and surface potential (DeltaV) isotherms, UV-vis reflection spectroscopy, and Brewster angle microscopy (BAM) for the Langmuir films and contact angle measurements, UV-vis, fluorescence, IR and Raman spectroscopy and scanning electronic microscopy (SEM) for the LB films. Our study reveals that lateral chains of the polymer situate preferentially onto the water surface with the acid group in contact with the water, where aggregates are scarcely formed. Therefore, the lateral chains of PAzCOOH can be treated as individual monomers to determine structural properties of the fabricated Langmuir and LB films. Monomeric treatment has been used to interpret UV-vis reflection spectroscopy, and a monomer model has been performed to represent lateral chains using density functional theory at B3LYP 6-31G(d,p) level of theory to assign the observed vibrational spectra.     

Surface enhanced fluorescence and Raman imaging of Langmuir-Blodgett azopolymer films

The spectroscopic properties and surface-enhanced spectra of Langmuir-Blodgett (LB) films of methacrylic homopolymer (HPDR13) are presented. It is shown that LB film displays strong fluorescence attributed to the spatial restrictions imposed by its structure. The emission is observed in conjunction with photoisomerization, a process clearly demonstrated by the formation of surface-relief gratings in the LB film [C.R. Mendon?a et al., Macromolecules 32 (1999) 1493]. Surface-enhanced Raman scattering (SERS), Surface-enhanced resonance Raman scattering (SERRS) and surface-enhanced fluorescence (SEF) were observed for LB films of HPDR13 deposited onto silver island films. SERS measurements were also carried out on a sample fabricated with one monolayer LB film deposited onto silver islands followed by one overlayer of silver (LB sandwiched between two layers of silver islands). The polymer interacts very weakly with the metal surface (physisorption), and the enhancement effect is determined by the local electric field enhancement. The strong SERS and SERRS signals were suitable for micro-Raman imaging. Line, area mapping and global images of the LB monolayer on silver island are reported. The transfer ratio in the fabrication of the LB suggests a homogeneous coating of the silver islands, thereby the chemical images show the variation of the SERS intensity due to surface enhancement.     

Oligofunctional amphiphiles featuring geometric core group preorganization: synthesis and study of Langmuir and Langmuir-Blodgett films

Based on the principle of supramolecular preorganization, a new type of oligofunctional amphiphile, of which compounds 1-4 are representative structures, has been designed and synthesized. The typical feature of their structure is a highly rigid and geometrically well-defined central unit composed of ethynylene substituted aromatic spacers with different numbers of amphiphilic segment groups (also of a rigid geometric design) attached to it. The molecules form well-defined Langmuir films when spread from a solution at the air/water interface or when a 10(-4) M aqueous CaCl2 solution was used as the subphase. By analysis of the surface pressure-surface area (pi-A) isotherms, information on the packing behavior and orientation of the amphiphilic molecules depending on the molecular structure could be obtained. Morphological characterization of the dynamic process of monolayer compression at the air/water interface was carried out by Brewster angle microscopy, illustrating several phase states visualized as snap shots. Thin monolayer films produced on a 10(-4) M aqueous CaCl2 subphase can be transferred to a mica solid support by the Langmuir-Blodgett technique. Tapping mode atomic force microscopy reveals a surface topography of the monofilms composed of 1 and 3 that differ in roughness and also in the properties of elasticity, hardness and adhesive strength. X-Ray crystal structure analysis of three relevant intermediate compounds of the synthesis were successfully determined giving an indication of the potential structural features inherent in the new amphiphiles.     

Alignment of liquid crystal and dichroic dye molecules in mixed Langmuir and Langmuir-Blodgett films

A study of dichroic dye-liquid crystal mixtures (guest-host systems) in monolayers formed at a gas-liquid interface (Langmuir films) and at a solid surface (Langmuir-Blodgett films) has been made. As a host 4- n -octyl-4′-cyanobiphenyl (8CB) or 4- n -pentyl-4″-cyano- p -terphenyl (5CT) were chosen, while three dichroic azo dyes with various molecular structures were used as guest species. The dyes were added to the liquid crystal matrices at a concentration corresponding to the whole range of molar fractions and the surface pressure-mean molecular area isotherms for Langmuir films were recorded. On the basis of the isotherms, conclusions about the molecular organization and the miscibility of the components in the ultrathin films were drawn. The Langmuir films were transferred onto the quartz plates at surface pressures below the collapse point. The polarized absorption spectra of the Langmuir-Blodgett films were recorded and information about the alignment and intermolecular interactions in the mixtures of the non-amphiphilic dichroic dyes and the liquid crystals with strongly polar terminal groups were obtained.     

Alignment of liquid crystal and dichroic dye molecules in mixed Langmuir and Langmuir-Blodgett films

A study of dichroic dye-liquid crystal mixtures (guest-host systems) in monolayers formed at a gas-liquid interface (Langmuir films) and at a solid surface (Langmuir-Blodgett films) has been made. As a host 4- n -octyl-4'-cyanobiphenyl (8CB) or 4- n -pentyl-4"-cyano- p -terphenyl (5CT) were chosen, while three dichroic azo dyes with various molecular structures were used as guest species. The dyes were added to the liquid crystal matrices at a concentration corresponding to the whole range of molar fractions and the surface pressure-mean molecular area isotherms for Langmuir films were recorded. On the basis of the isotherms, conclusions about the molecular organization and the miscibility of the components in the ultrathin films were drawn. The Langmuir films were transferred onto the quartz plates at surface pressures below the collapse point. The polarized absorption spectra of the Langmuir-Blodgett films were recorded and information about the alignment and intermolecular interactions in the mixtures of the non-amphiphilic dichroic dyes and the liquid crystals with strongly polar terminal groups were obtained.     

Interaction of polysaccharide-protein complex from Agaricus blazei with Langmuir and Langmuir-Blodgett films of phospholipids

The use of natural substances in health applications may be hampered by the difficulties in establishing the mechanisms of action, especially at molecular-level. The protein-polysaccharide complex extracted from the mushroom Agaricus blazei Murill, referred to as CAb, has been considered for treating various diseases with probable interaction with cell membranes. In this study, we investigate the interaction between CAb and a cell membrane model represented by a Langmuir monolayer of dimyristoyl phosphatidic acid (DMPA). CAb affects the structural properties of DMPA monolayers causing expansion and increasing compressibility. In addition, interaction with DMPA polar heads led to neutralization of the electrical double layer, yielding a zero surface potential at large areas per molecule. CAb remained at the interface even at high surface pressures, which allowed transfer of Langmuir-Blodgett (LB) films onto solid supports with the CAb-DMPA mixture. The mass transferred, according to quartz crystal microbalance (QCM) measurements, increased linearly with the number of deposited layers. With UV-vis absorption, fluorescence and FTIR spectroscopies, we confirmed that the LB films contain polysaccharides, proteins and DMPA. Therefore, the CAb biological action must be attributed not only to polysaccharides but also to proteins in the complex.     

Control of photoreaction of amphiphilic spiropyran/n-alkane Langmuir and Langmuir-Blodgett films using the phase transition of n-alkane

The structures and photoreactions of Langmuir and Langmuir-Blodgett (LB) films of an amphiphilic spiropyran, 1',3'-dihydro-3',3'-dimethyl-6-nitro-1'-octadecyl-8-(docosanoyloxymethyl)spiro[2H-1-benzopyran-2,2'-(2H)-indole] (SP), mixed with n-alkane are investigated. The mixing ratio was fixed at 1/2 for SP/n-alkane. The surface pressure-area isotherms of SP/octadecane are categorized into two regimes: a low-temperature regime where octadecane is packed with the alkyl chains of SP, and a high-temperature regime where the addition of octadecane does not influence the isotherms significantly. The temperature dividing the two regimes is related with the melting point of the n-alkane mixed with SP in the bulk. UV irradiation of the Langmuir film in the high-temperature regime gives rise to light-induced J-aggregation, whereas that in the low-temperature regime causes only the isomerization of SP to the corresponding merocyanine, indicating that J-aggregation is hindered by the presence of n-alkane in the low-temperature regime. IR external reflection spectroscopy of the Langmuir films shows that n-alkane is released from the film during J-aggregation. The structural changes of the mixed Langmuir and LB films during J-aggregation are almost the same with those of the films of pure SP.