Fabrication of phytic acid sensor based on mixed phytase-lipid Langmuir-Blodgett films

This paper reports the surface activity of phytase at the air-water interface, its interaction with lipid monolayers, and the construction of a new phytic acid biosensor on the basis of the Langmuir-Blodgett (LB) technique. Phytase was inserted in the subphase solution of dipalmitoylphosphatidylglycerol (DPPG) Langmuir monolayers, and its incorporation to the air-water interface was monitored with surface pressure measurements. Phytase was able to incorporate into DPPG monolayers even at high surface pressures, ca. 30 mN/m, under controlled ionic strength, pH, and temperature. Mixed Langmuir monolayers of phytase and DPPG were characterized by surface pressure-area and surface potential-area isotherms, and the presence of the enzyme provided an expansion in the monolayers (when compared to the pure lipid at the interface). The enzyme incorporation also led to significant changes in the equilibrium surface compressibility (in-plane elasticity), especially in liquid-expanded and liquid-condensed regions. The dynamic surface elasticity for phytase-containing interfaces was investigated using harmonic oscillation and axisymmetric drop shape analysis. The insertion of the enzyme at DPPG monolayers caused an increase in the dynamic surface elasticity at 30 mN m(-)(1), indicating a strong interaction between the enzyme and lipid molecules at a high-surface packing. Langmuir-Blodgett (LB) films containing 35 layers of mixed phytase-DPPG were characterized by ultraviolet-visible and fluorescence spectroscopy and crystal quartz microbalance nanogravimetry. The ability in detecting phytic acid was studied with voltammetric measurements.     

Orientational changes in dipalmitoyl phosphatidyl glycerol Langmuir monolayers

Dipalmitoyl phosphatidyl glycerol (DPPG) as Langmuir monolayers at the air/water interface was investigated by means of surface pressure measurements in addition to Brewster angle microscopy (BAM) during film compression/expansion. A characteristic phase transition region appeared in the course of surface pressure-area (pi-A) isotherms for monolayers spread on alkaline water or buffer subphase, while on neutral or acidic water the plateau region was absent. This phase transition region was attributed to the ionization of DPPG monolayer. It has been postulated that the ionization of the phosphatidyl glycerol group leads to its increased solvation, which probably provokes both a change in the orientation of the polar group and its deeper penetration into bulk phase. Film compression along the transition region provokes the dehydration of polar groups and subsequent change of their conformation, thus causing the DPPG molecules to emerge up to the interface. Quantitative Brewster angle microscopy (BAM) measurements revealed that along the liquid-expanded to liquid-condensed phase transition the thickness of the ionized DPPG monolayer increases by 4.2 A as a result of the conformational changes of the ionized polar groups, which tend to emerge from the bulk subphase up to the surface.     

Penetration of bovine serum albumin into dipalmitoylphosphatidylglycerol monolayers: direct observation by atomic force microscopy

The penetration of bovine serum albumin (BSA) into dipalmitoylphosphatidylglycerol (DPPG) monolayers was observed using atomic force microscopy (AFM) and surface pressure measurements. The effects of surface pressure, amount of BSA and the addition of ganglioside GM1 (GM1) were investigated. The surface pressure of the DPPG monolayer was increased by the penetration of BSA, and the increase in surface pressure was greater in the liquid-expanded film than that in the liquid-condensed film. The AFM images indicated that BSA penetrated into the DPPG monolayer. The amount of BSA that penetrated into the DPPG monolayer increased with time and with the amount of BSA added. On the contrary, the AFM image showed that BSA penetration into the mixed DPPG/GM1 (9 : 1) monolayer scarcely occurred. GM1 inhibited the penetration of BSA into the DPPG monolayer.     

Chemical synthesis of bacterial lipoteichoic acids: an insight on its biological significance

During infections caused by Gram-negative bacteria, lipopolysaccharide (LPS, endotoxin) has a dominant role leading to fulminant pro-inflammatory reactions in the host. As there is no LPS in Gram-positive bacteria, other microbial cell wall components have been identified to be the causative agent for the pro-inflammatory activity since also Gram-positive bacterial infections lead to comparable clinical symptoms and reactions. On search for the "Gram-positive endotoxin" a widely accepted hypothesis has been raised in that the lipoteichoic acids (LTAs) serve as pathogen-associated molecular patterns (PAMPs) during Gram-positive sepsis, although the amount necessary for a pro-inflammatory in vitro response is several orders of magnitude higher than that for LPS. Therefore, LTA cannot be considered to be "the (endo)toxin of Gram-positive bacteria". Although LPS and LTA show structural relatedness (amphiphilic, negatively charged glycophospholipids), they are structurally quite different from each other and one might expect that they are also recognized by different receptors of the innate immune system, the so called toll-like receptors 4 and 2 (TLR4 and TLR2), respectively. Based on their chemical structure, the LTAs were classified into four types (type I-IV) of which we have carefully investigated the LTA of Staphylococcus aureus (type I), Lactococcus garvieae (type II) and Streptococcus pneumoniae (type IV). Hence, these LTAs have been synthesized in our group and biologically evaluated with respect to their potency to activate cytokines in transiently TLR2/CD14-transfected human endothelial kidney cells (HEK 293) or human macrophages and whole blood cells. Although LTA of type I and IV are structurally quite different, especially in their hydrophilic moiety, they originally were believed to interact with the same receptor (TLR2). Hence, the chemical syntheses leading to structurally defined, non-contaminated stimuli have a major impact on the outcome and interpretation of these biological studies of the innate immune system. With this material, it became evident that synthetic LTA from S. aureus and S. pneumoniae are not recognized by TLR2. Instead, another receptor of the innate immune system, the lectin pathway of the complement, known since many years to interact with LTA in quite a specific way, has gained increasing attractivity. With the help of synthetic LTA we obtained first evidences that this receptor is indeed the pathogen recognition receptor (PRR) for LTA.     

Thermodynamic and infrared analyses of the interaction of chlorpromazine with phospholipid monolayers

An investigation has been made of the interaction between chlorpromazine (CPZ) and monolayers of 1,2-dipalmitoyl-sn-3-glycerophosphatidylcholine (DPPC) and 1,2-dipalmitoyl-sn-3-glycero[phospho-rac-(1-glycerol)] (DPPG), both at the air/water interface and in transferred Langmuir-Blodgett films. The Gibbs free energy, DeltaG, and the compressibility modulus (C(S)(-1)), obtained from the surface pressure isotherms, indicated changes in the in-plane interactions of CPZ/DPPG mixed monolayers, with positive values of DeltaG. The arrangement of CPZ in the zwitterionic DPPC monolayers causes a weaker interaction in CPZ/DPPC mixed monolayers, with the DeltaG fluctuating around zero. IR measurements in transferred monolayers showed that CPZ did not affect the conformational order of the acyl chains, its effects being limited to the bands corresponding to the headgroups. Furthermore, since no shift was observed for the acyl chain bands, the phase transition induced by CPZ is not a liquid expanded (LE) to liquid condensed (LC) transition, as the latter is associated with chain ordering. Taken together, the IR and compressibility results demonstrate that the effect from CPZ cannot be correlated with temperature changes in the subphase for pure monolayers, in contrast to models proposed by other authors.     

Microphase separation in mixed monolayers of DPPG with a double hydrophilic block copolymer at the air-water interface: a BAM, LSCFM, and AFM study

Phase separation and interactions in mixed monolayers of dipalmitoylphosphatidylglycerol (DPPG) with the rhodamine B end-labeled double-hydrophilic block copolymer (DHBC), poly(N,N-dimethylacrylamide)-block-poly(N,N-diethylacrylamide) (RhB-PDMA(207)-b-PDEA(177)), was studied at the air-water interface. Surface pressure versus area isotherms indicate that both components behave almost independently. Brewster angle microscopy (BAM) images show a random distribution of liquid condensed (LC) domains of DPPG in an apparent homogeneous matrix of DHBC, excluding the macroscopic phase separation. The laser scanning confocal fluorescence microscopy (LSCFM) of the rhodamine dye at the end of the PDMA chain showed how the DHBC is distributed in Langmuir-Blodgett (LB) mixed monolayers. The high spatial resolution of atomic force microscopy (AFM) combined with the LCSFM images indicates that DHBC incorporates in the expanded phase of DPPG to form mixed domains, being excluded from the condensed regions. Upon compression, nanosized LC domains of DPPG nucleate inside the mixed domains corralled in the nanopatterning of pure DHBC. The negatively charged polar group of DPPG inhibits rhodamine aggregation, while the long polymer chains promote the formation of corralled nanodomains of DPPG in two dimensions.     

Interaction of antimicrobial arginine-based cationic surfactants with liposomes and lipid monolayers

The present work examines the relationship between the antimicrobial activity of novel arginine-based cationic surfactants and the physicochemical process involved in the perturbation of the cell membrane. To this end, the interaction of these surfactants with two biomembrane models, namely, 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) multilamellar lipid vesicles (MLVs) and monolayers of DPPC, 1,2-dipalmitoyl-sn-glycero-3-[phospho-rac-(1-glycerol)] sodium salt (DPPG), and Escherichia coli total lipid extract, was investigated. For the sake of comparison, this study included two commercial antimicrobial agents, hexadecyltrimethylammonium bromide and chlorhexidine dihydrochloride. Changes in the thermotropic phase transition parameters of DPPC MLVs in the presence of the compounds were studied by differential scanning calorimetry analysis. The results show that variations in both the transition temperature (Tm) and the transition width at half-height of the heat absorption peak (deltaT1/2) were consistent with the antimicrobial activity of the compounds. Penetration kinetics and compression isotherm studies performed with DPPC, DPPG, and E. coli total lipid extract monolayers indicated that both steric hindrance effects and electrostatic forces explained the antimicrobial agent-lipid interaction. Overall, in DPPC monolayers single-chain surfactants had the highest penetration capacity, whereas gemini surfactants were the most active in DPPG systems. The compression isotherms showed an expansion of the monolayers compared with that of pure lipids, indicating an insertion of the compounds into the lipid molecules. Owing to their cationic character, they are incorporated better into the negatively charged DPPG than into zwitterionic DPPC lipid monolayers.     

Using phospholipid Langmuir and Langmuir-Blodgett films as matrix for urease immobilization

The immobilization of enzymes in organized two-dimensional matrices is a key requirement for many biotechnological applications. In this paper, we used the Langmuir-Blodgett (LB) technique to obtain controlled architectures of urease immobilized in solid supports, whose physicochemical properties were investigated in detail. Urease molecules were adsorbed at the air-water interface and incorporated into Langmuir monolayers of the phospholipid dipalmitoyl phosphatidyl glycerol (DPPG). Incorporation of urease made DPPG monolayers more flexible and caused the reduction of the equilibrium and dynamic elasticity of the film. Urease and DPPG-urease mixed monolayers could be transferred onto solid substrates, forming LB films. A close packing arrangement of urease was obtained, especially in the mixed LB films, which was inferred with nanogravimetry and electrochemistry measurements. From the blocking effect of the LB films deposited onto indium tin oxide (ITO) substrates, the electrochemical properties of the LB films pointed to a charge transport controlled by the lipid architecture.     

Hepatitis A Synthetic Peptide VP3(110-121) Miscibility with Dipalmitoylphosphatidylcholine, Dipalmitoylphosphatidylglycerol, and Stearylamine Monolayers

To prepare liposomes containing a synthetic hepatitis A virus antigen (HAV) [VP3(110-121)] as a vaccine, the miscibility of this peptide (with negative net charge) with a neutral lipid [dipalmitoylphosphatidylcholine (DPPC)], a negatively charged lipid [dipalmitoylphosphatidylglycerol (DPPG)], and a positively charged lipid [Stearylamine (SA)] was studied through compression isotherms of monolayers. Mixtures with DPPC and SA showed a low degree of interaction with the peptide, the composition of the monolayer being stable through compression. For DPPG-containing monolayers larger positive deviations from ideality were found, and the peptide was squeezed out from the monolayer at a DPPG/VP3(110-121) mole fraction of 0.8/0.2. All this suggests that besides hydrophobic interactions between the peptide and the lipid, electrostatic forces also play a role; thus it seems that neutral and positively charged lipids would be more suitable for preparing stable liposomes with VP3(110-121). Copyright 2000 Academic Press.     

Lipid binding interactions of antimicrobial plant seed defence proteins: puroindoline-a and β-purothionin

The indolines and thionins are basic, amphiphilic and cysteine-rich proteins found in cereals; puroindoline-a (Pin-a) and β-purothionin (β-Pth) are members of these families in wheat (Triticum aestivum). Pin-a and β-Pth have been suggested to play a significant role in seed defence against microbial pathogens, making the interaction of these proteins with model bacterial membranes an area of potential interest. We have examined the binding of these proteins to lipid monolayers composed of 1,2-dipalmitoyl-sn-glycero-3-phospho-(1'-rac-glycerol) (DPPG) using a combination of neutron reflectometry, Brewster angle microscopy, and infrared spectroscopy. Results showed that both Pin-a and β-Pth interact strongly with condensed phase DPPG monolayers, but the degree of penetration was different. β-Pth was shown to penetrate the lipid acyl chain region of the monolayer and remove lipids from the air/liquid interface during the adsorption process, suggesting this protein may be able to both form membrane spanning ion channels and remove membrane phospholipids in its lytic activity. Conversely, Pin-a was shown to interact mainly with the head-group region of the condensed phase DPPG monolayer and form a 33 ? thick layer below the lipid film. The differences between the interfacial structures formed by these two proteins may be related to the differing composition of the Pin-a and β-Pth hydrophobic regions.     

Dynamic Behaviors and Morphology Change of Anionic Phospholipid DPPG Monolayer Caused by Bovine Serum Albumin at Air-Water Interface

The interaction between bovine serum albumin (BSA) and the anionic 1.2-dipalmitoyl-snglycero- 3-(phospho-rac-(1-glycerol)) (sodium salt) (DPPG) phospholipid at different subphase pH values was investigated at air-water interface through surface pressure measurements and atomic force microscopy (AFM) observation. By analyzing surface pressure-mean molecular area (π-A) isotherms, the limiting molecular area in the closed packing state-the concentration of BSA (A_lim-[BSA]) curves, the compressibility coefficient-surface pressure (C_S^-1-π) curves and the difference value of mean molecular area-the concentration of BSA (ΔA-[BSA]) curves, we obtained that the mean molecular area of DPPG monolayer became much larger when the concentration of BSA in the subphase increased at pH=3 and 5. But the isotherms had no significant change at different amount of BSA at pH=10. In addition, the amount of BSA molecules adsorbed onto the lipid monolayer reached a threshold value when [BSA]>5×10^-8 mol/L for all pHs. From the surface pressure-time (π-t) data, we obtained that desorption and adsorption processes occurred at pH=3, however, there was only desorption process occurring at pH=5 and 10. These results showed that the interaction mechanism between DPPG and BSA molecules was affected by the pH of subphase. BSA molecules were adsorbed onto the DPPG monolayers mainly through the hydrophobic interaction at pH=3 and 5, and the strength of hydrophobic interaction at pH=3 was stronger than the case of pH=5. At pH=10, a weaker hydrophobic interaction and a stronger electrostatic repulsion existed between DPPG and BSA molecules. AFM images revealed that the pH of subphase and [BSA] could affect the morphology features of the monolayers, which was consistent with these curves. The study provides an important experimental basis and theoretical support to understand the interaction between lipid and BSA at the air-water interface.     

Influence of lipidation of GBV-C/HGV NS3 (513-522) and (505-514) peptide sequences on its interaction with mono and bilayers

Two decapeptide fragments of the non-structural hepatitis G NS3 protein (GBV-C/HGV), 513-522 (RGRTGRGRSG) and 505-514 (SAELSMQRRG), as well as their palmitoylated derivatives were synthesized. The physico-chemical properties of the peptides were analyzed in both the absence and presence of the zwitterionic 1,2-dipalmitoyl-sn-glycero-3-phosphatidylcholine (DPPC), the negative 1,2-dipalmitoyl-sn-glycero-3-[phospho-rac-(1-glycerol)] (DPPG) and the positive 1,2-dioeloyl-3-trimethylammonium-propane (DOTAP) lipid monolayers. Based on their high hydrophilic properties, neither parent peptide presented surface activity and their incorporation into lipid monolayers was low. In contrast, their palmitoylated derivatives showed concentration-dependent surface activity and could be inserted into lipid monolayers to varying degrees depending on their sequence. Compression isotherms showed that the presence of palmitoylated peptides in the subphase resulted in a molecular arrangement less condensed than that corresponding to the pure phospholipid. In concordance with the monolayer results, differential scanning calorimetry (DSC) demonstrated that the parent peptides did not have any effect on the thermograms, while the palmitoylated derivatives affected the thermotropic properties of DPPC bilayers.     

Ionization state and structure of l-1,2-dipalmitoylphosphatidylglycerol monolayers at the liquid/air interface

Phosphatidylglycerols are components of biological membranes. The phase behavior of these phospholipids was extensively investigated. However, there is still no definite picture about the dependence of the ionization state and monolayer structure on subphase composition. The major problem of previous investigations is that none of the methods used allow obtaining the ionization degree directly. In the present work we apply techniques developed in the past decades for Langmuir monolayers: infrared reflection absorption spectroscopy (IRRAS) as well as X-ray diffraction and reflectivity techniques, which provide straightforward information about structure and ionization state of a L-1,2-dipalmitoylphosphatidylglycerol (DPPG) monolayer. The Gouy-Chapman model is applied to evaluate the intrinsic pKa. Therewith, the ionization degree can be determined even at low pH values. The experimental titration curves are in good agreement with theoretical curves based on the Gouy-Chapman model. The obtained instrinic pKa amounts to 1. The ionization degree of a DPPG monolayer is independent of the monovalent cation size. In contrast, the structure of a DPPG monolayer is strongly affected by the type of divalent cations.     

Synthesis of the core structure of the lipoteichoic acid of Streptococcus pneumoniae

Streptococcus pneumoniae LTA is a highly complex glycophospholipid that consists of nine carbohydrate residues: three glucose, two galactosamine and two 2‐acetamino‐4‐amino‐2,4,6‐trideoxygalactose (AATDgal) residues that are each differently linked, one ribitol and one diacylated glycerol (DAG) residue. Suitable building blocks for the glucose and the AATDgal residues were designed and their synthesis is described in this paper. These building blocks permitted the successful synthesis of the core structure Glcβ(1‐3)AATDgalβ(1‐3)Glcα(1‐O)DAG in a suitably protected form for further chain extension ( 1 b , 1 c ) and as unprotected glycolipid ( 1 a ) that was employed in biological studies. These studies revealed that 1 a as well as 1 lead to interleukin‐8 release, however not via TLR2 or TLR4 as receptor.     

Axisymmetric drop shape analysis-constrained sessile drop (ADSA-CSD): a film balance technique for high collapse pressures

Collapse pressure of insoluble monolayers is a property determined from surface pressure/area isotherms. Such isotherms are commonly measured by a Langmuir film balance or a drop shape technique using a pendant drop constellation (ADSA-PD). Here, a different embodiment of a drop shape analysis, called axisymmetric drop shape analysis-constrained sessile drop (ADSA-CSD) is used as a film balance. It is shown that ADSA-CSD has certain advantages over conventional methods. The ability to measure very low surface tension values (e.g., <2 mJ/m2), an easier deposition procedure than in a pendant drop setup, and leak-proof design make the constrained sessile drop constellation a better choice than the pendant drop constellation in many situations. Results of compression isotherms are obtained on three different monolayers: octadecanol, dipalmitoyl-phosphatidyl-choline (DPPC), and dipalmitoyl-phosphatidyl-glycerol (DPPG). The collapse pressures are found to be reproducible and in agreement with previous methods. For example, the collapse pressure of DPPC is found to be 70.2 mJ/m2. Such values are not achievable with a pendant drop. The collapse pressure of octadecanol is found to be 61.3 mJ/m2, while that of DPPG is 59.0 mJ/m2. The physical reasons for these differences are discussed. The results also show a distinctive difference between the onset of collapse and the ultimate collapse pressure (ultimate strength) of these films. ADSA-CSD allows detailed study of this collapse region.     

Chitosan as a removing agent of beta-lactoglobulin from membrane models

Many chitosan biological activities depend on the interaction with biomembranes, but so far it has not been possible to obtain molecular-level evidence of chitosan action. In this article, we employ Langmuir phospholipid monolayers as cell membrane models and show that chitosan is able to remove beta-lactoglobulin (BLG) from negatively charged dimyristoyl phosphatidic acid (DMPA) and dipalmitoyl phosphatidyl glycerol (DPPG). This was shown with surface pressure isotherms and elasticity and PM-IRRAS measurements in the Langmuir monolayers, in addition to quartz crystal microbalance and fluorescence spectroscopy measurements for Langmuir-Blodgett (LB) films transferred onto solid substrates. Some specificity was noted in the removal action because chitosan was unable to remove BLG incorporated into neutral dipalmitoyl phosphatidyl choline (DPPC) and cholesterol monolayers and had no effect on horseradish peroxidase and urease interacting with DMPA. An obvious biological implication of these findings is to offer reasons that chitosan can remove BLG from lipophilic environments, as reported in the recent literature.     

Structural and morphological changes in bacteria-membrane mimetic DPPE/DPPG/water systems induced by sulfadiazine

The effects of sulfadiazine (SD), one of the generally used antibiotics was studied on bacteria-membrane mimetic model systems consisting of pure dipalmitoylphosphatidylethanolamine (DPPE) and DPPE/dipalmitoylphosphatidylglycerol (DPPG) at 95/5, 80/20 and 50/50 DPPE/DPPG ratios by using differential scanning calorimetry (DSC), simultaneous small- and wide-angle X-ray scattering (SWAXS) and freeze-fracture technique. In the presence of SD, varied between 10-3 and 1 SD/lipid molar ratios, the 95/5 DPPE/DPPG system shows tendentious destruction in the layer arrangement which is accompanied by minor perturbations in the thermotropic behaviour. Moreover, at this lipid composition the addition of SD results in the formation of stacks of extremely extended flat bilayers. Systems having a higher DPPG molar ratio exhibit complex and diffuse morphologies. At 50/50 DPPE/DPPG ratio DPPG and SD act together and form large spherical vesicles. The uniform morphology is not accompanied by a regular lamellar arrangement. The range of the SD/lipid ratio, where the SD molecules are embedded into the lipid bilayers, extends to about 10-1. Over this limit the separation of SD molecules can be observed at all investigated DPPE/DPPG ratios.     

Synthesis of structural variants of Staphylococcus aureus lipoteichoic acid (LTA)

Based on 1,2-O-isopropylidene-sn-glycerol, which is readily available from d-mannitol, five chiral building blocks for the construction of structural variants of Staphylococcus aureus LTA designed and synthesized. Ligation of these building blocks led readily to the target molecules 1 and 2. They demonstrated that the d-alanine residues at the glycerophosphate backbone are decisive for the activation of the immune system.     

Effect of polymer chain length on membrane perturbation activity of cationic phenylene ethynylene oligomers and polymers

The interactions of poly(phenylene ethynylene)- (PPE-) based cationic conjugated polyelectrolytes (CPEs) and oligo(phenylene ethynylene)s (OPEs) with different model lipid membrane systems were investigated to gain insight into the relationship between molecular structure and membrane perturbation ability. The CPE and OPE compounds exhibit broad-spectrum antimicrobial activity, and cell walls and membranes are believed to be their main targets. To better understand how the size, in terms of the number of repeat units, of the CPEs and OPEs affects their membrane disruption activities, a series of PPE-based CPEs and OPEs were synthesized and studied. A number of photophysical techniques were used to investigate the interactions of CPEs and OPEs with model membranes, including unilamellar vesicles and lipid monolayers at the air/water interface. CPE- or OPE-induced dye leakage from vesicles reveals that the CPEs and OPEs selectively perturb model bacterial membranes and that their membrane perturbation abilities are highly dependent on molecular size. Consistent with dye-leakage assay results, the CPEs and OPEs also exhibit chain-length-dependent ability to insert into 1,2-dipalmitoyl-sn-glycero-3-phospho-(1'-rac-glycerol) (DPPG) monolayers. Our results suggest that, for PPE-based CPE and OPE antimicrobials, chain length can be tuned to optimize their membrane perturbation ability.     

Effect of adsorption of bovine serum albumin on liposomal membrane characteristics

The effect of adsorption of bovine serum albumin (BSA) on the membrane characteristics of liposomes at pH 7.4 was examined in terms of zeta potential, micropolarity, microfluidity and permeability of liposomal bilayer membranes, where negatively charged L-alpha-dipalmitoylphosphatidylglycerol (DPPG)/L-alpha-dipalmitoylphosphatidylcholine (DPPC), negatively charged dicetylphosphate (DCP)/DPPC and positively charged stearylamine (SA)/DPPC mixed liposomes were used. BSA with negative charges adsorbed on negatively charged DPPG/DPPC mixed liposomes but did not adsorb on negatively charged DCP/DPPC and positively charged SA/DPPC mixed liposomes. Furthermore, the adsorption amount of BSA on the mixed DPPG/DPPC liposomes increased with increasing the mole fraction of DPPG in spite of a possible electrostatic repulsion between BSA and DPPG. Thus, the adsorption of BSA on liposomes was likely to be related to the hydrophobic interaction between BSA and liposomes. The microfluidity of liposomal bilayer membranes near the bilayer center decreased by the adsorption of BSA, while the permeability of liposomal bilayer membranes increased by the adsorption of BSA on liposomes. These results are considered to be due to that the adsorption of BSA brings about a phase separation in liposomes and that a temporary gap is consequently formed in the liposomal bilayer membranes, thereby the permeability of liposomal bilayer membranes increases by the adsorption of BSA.