Synthesis of aromatic polyethers by Scholl reaction. II. On the polymerizability of 4,4′-bis(phenoxy)diphenyl sulfones and of 4,4′-bis(phenythiol)diphenyl sulfone

4,4′-Bis(phenoxy)diphenyl sulfone ( 1 ), 4,4′-bis(phenylthio)diphenyl sulfone ( 2 ), and 1 substituted with various electron-donating groups in the phenoxy units were synthesized and polymerized under oxidative reaction conditions. The presence of methyl, tert-butyl, and methoxy groups as substituents on the phenoxy groups of 1 increases both the yield and the solubility of the resulting polymers. The structure-reactivity relationship of the monomers and of the growing species were discussed based on a radical-cation mechanism of polymerization. Monomers of high nucleophilicity and resonance stabilized radical-cation growing species are crucial to achieve polymers of high molecular weight. The structure of the polymers and in several cases of their chain ends were determined by ¹H-NMR spectroscopy. The mechanism of termination and the side reactions occuring during this polymerization process were discussed based on the structure of the resulting polymers.     

Wholly aromatic thermotropic liquid crystalline polyesters of 3,3′-bis(phenyl)-4,4′-biphenol with 4,4′-benzophenone dicarboxylic acid

A series of wholly aromatic, thermotropic polyesters, derived from 3,3′-bis(phenyl)-4,4′-biphenol (DPBP), nonlinear 4,4′-benzophenone dicarboxylic acid (4,4′-BDA), and various linear comonomers, were prepared by the melt polycondensation reaction and characterized for their thermotropic properties by a variety of experimental techniques. The homopolymer of DPBP with 4,4′-BDA had a fusion temperature (T_f) at 265°C, exhibited a nematic phase, and had a liquid crystalline range of 105°C. All of the copolyesters of DPBP with 4,4′-BDA and either 30 mol % 4-hydroxybenzoic acid (HBA), 6-hydroxy-2-naphthoic acid (HNA), or 50 mol % terephthalic acid (TA), 2,6-naphthalenedicarboxylic acid (2,6-NDA) had low T_f values in the range of 220–285°C, exhibited a nematic phase, and had accessible isotropization transitions (T_i) in the range of 270–420°C, respectively. Their accessible T_i values would enable one to observe a biphase structure. Each of the copolymers with HBA or HNA had a much broader range of liquid crystalline phase. In contrast, each of the copolymers with TA or 2,6-NDA had a relatively narrow range of liquid crystalline phase. Each of these polyesters had a glassy, nematic morphology that was confirmed with the DSC, PLM, WAXD, and SEM studies. As expected, they had higher glass transition temperatures (T_g) in the range of 161–217°C than those of other liquid crystalline polyesters, and excellent thermal stabilities (T_d) in the range of 494–517°C, respectively. Despite their noncrystallinity, they were not soluble in common organic solvents with the exception that the homopolymer and its copolymer with TA had limited solubility in CHCl₃. However, they were soluble in the usual mixture of p-chlorophenol/1,1,2,2-tetrachloroethane (60/40 by weight) with the exception of the copolymer with 2,6-NDA. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 769–785, 1997     

Properties of tetra-N-glycidyl-4,4′-diamino diphenyl methane (TGDDM) cured thick films

Thick films of tetra-N-glycidyl epoxy resin of p,p′-diaminodiphenyl methane (TGDDM) were prepared using p,p′-diaminodiphenyl methane (DDM), p,p′-diaminodiphenyl sulfone (DDS) and diethylene triamine (DETA) as curing agent with or without the epoxy fortifiers PGEHA and VCDRC (at 20 phr level). These thick films were used to evaluate various physical, mechanical, chemical resistant and dielectric properties.     

Synthesis and properties of new soluble aromatic polybenzoxazoles from 4,4′-diamino-3,3′-dihydroxytriphenylamines and aromatic dicarboxylic acids

Two new triphenylamine-based bis (o-aminophenol) monomers, 4,4′-diamino-3,3′-dihydroxytriphenylamines, were successfully synthesized by the cesium fluoride-mediated condensation of 2-(benzyloxy)-4-fluoronitrobenzene with aniline derivatives, followed by simultaneous deprotection and reduction. Aromatic polybenzoxazoles having inherent viscosities of 0.58–1.05 dL/g were obtained by the low-temperature solution polycondensation of the bis(aminophenol)s with various aromatic dicarboxylic acid chlorides and the subsequent thermal cyclodehydration of the resultant poly(hydroxyamide)s. All the polybenzoxazoles were amorphous, and most of them were soluble in organic solvents such as m-cresol and o-chlorophenol. Flexible and tough films of polybenzoxazoles could be cast from the DMAc solutions of some aromatic poly(hydroxyamide)s, followed by thermal cyclodehydration. The glass transition temperatures and 10% weight loss temperatures of the polybenzoxazoles under nitrogen were in the range of 262–327 and 610–640°C, respectively. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1987–1994, 1998     

Synthetic study of aromatic polybenzoxazinone derived from methylene-4,4′-diaminodiphenyl-3,3′-dicarboxylic acid

Polybenzoxazinones were prepared in two successive steps from methylene-4,4′-diaminodiphenyl-3,3′-dicarboxylic acid and azodicarbonyl chloride in 40–60% yield. These polymers were characterized by molecular weight and IR and NMR spectra. Their physical properties like solubility, viscosity, and thermal stability were also studied in detail.     

Polyimidines. XI. Polyimidines from 3,3′,4,4′-benzophenonetetracarboxylic dianhydride and 4,4′-(hexafluoroisopropylidene) diphthalic anhydride

Two new bis(benzylidenephthalide)monomers were synthesized by melt condensation of phenylacetic acid with 3,3′,4,4′-benzophenonetetracarboxylic dianhydride (BTDA) and with 4,4′-(hexafluoroisopropylidene)diphthalic anhydride (6FDA). A mixture of three isomers for each monomer was obtained and polymerized with diamines to produce new polyimidines. Polymerizations were conducted with m-xylylenediamine (MXDA) or 4,4′-oxydianiline (ODA) in quantitative yields for the undehydrated intermediate. Inherent viscosities ranged from 0.17 to 0.35 dL/g in N,N-dimethylformamide (DMF) or N-methyl-2-pyrrolidone (NMP). These intermediate poly(hydroxylactams) were thermally dehydrated to polyimidines which exhibited a 10% weight loss, as high as 546°C in nitrogen. Inherent viscosities of the dehydrated (cured) polyimidines ranged from 0.14 to 0.20 dL/g in NMP. Brittle films could be cast from NMP solutions.     

Poly(ethylene terephthalate) reinforced by N,N′‐diphenyl biphenyl‐3,3′,4,4′‐tetracarboxydiimide moieties

Starting with 3,3′,4,4′‐biphenyltetracarboxylic dianhydride and methyl aminobenzoate, we synthesized a novel rodlike imide‐containing monomer, N,N′‐bis[p‐(methoxy carbonyl) phenyl]‐biphenyl‐3,3′,4,4′‐tetracarboxydiimide (BMBI). The polycondensation of BMBI with dimethyl terephthalate and ethylene glycol yielded a series of copoly(ester imide)s based on the BMBI‐modified poly(ethylene terephthalate) (PET) backbone. Compared with PET, these BMBI‐modified polyesters had higher glass‐transition temperatures and higher stiffness and strength. In particular, the poly(ethylene terephthalate imide) PETI‐5, which contained 5 mol % of the imide moieties, had a glass‐transition temperature of 89.9 °C (11 °C higher than the glass‐transition temperature of PET), a tensile modulus of 869.4 MPa (20.2 % higher than that of PET), and a tensile strength of 80.8 MPa (38.8 % higher than that of PET). Therefore, a significant reinforcing effect was observed in these imide‐modified polyesters, and a new approach to higher property polyesters was suggested. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 852–863, 2002; DOI 10.1002/pola.10169     

The synthesis of some 4,4′-disubstituted-2,2′-biquinolines

2,2′-Biquinoline dioxide and 4,4′-dichloro-2,2′-biquinoline have been used for the preparation of the following 4,4′-disubstituted-2,2′-biquinolines: dimethoxy, diethoxy, dihydroxy, dipiperidino, dipyrrolidino, dibromo, diphenoxy, dithiophenoxy, di(p-chloro-phenoxy), di(p-bromophenoxy), di(p-fluorophenoxy), di(β-naphthoxy) and the dinitro dioxide. Molar extinction coefficients have been determined for several of the copper (I) complexes of these compounds.     

Synthesis and characterization of poly(arylene ether)s derived from 4,4′‐bishydroxybiphenyl and 4,4′‐bishydroxyterphenyl

A series of poly(arylene ether)s were successfully prepared by aromatic, nucleophilic substitution reactions with various perfluoroalkyl‐activated bisfluoromonomers with 4,4′‐bishydroxybiphenyl and 4,4′‐bishydroxyterphenyl. 4,4′‐Bishydroxyterphenyl was synthesized through the Grignard coupling reaction of magnesium salt of 4‐bromoanisole with dibromobenzene followed by demethylation with pyridine–hydrochloride. The products obtained by the displacement of fluorine atoms exhibited good inherent viscosity, up to 0.77 dL/g, and number‐average molecular weights up to 69,300. These poly(arylene ether)s showed very good thermal stability, up to 548 °C for 5% weight loss according to thermogravimetric analysis under synthetic air, and high glass‐transition temperatures, up to 259 °C according to differential scanning calorimetry, depending on the exact repeat unit structure. These polymers were soluble in a wide range of organic solvents, such as N‐methylpyrrolidone, dimethylformamide, tetrahydrofuran, toluene, and CHCl₃, and were insoluble in dimethyl sulfoxide and acetone. Thin films of these poly(arylene ether)s showed good transparency and exhibited tensile strengths up to 132 MPa, moduli up to 3.34 GPa, and elongations at break up to 84%, depending on their exact repeating unit structures. These values are comparable to those of high‐performance thermoplastic materials such as poly(ether ether ketone) (PEEK) and Ultem poly(ether imide) (PEI). These poly(arylene ether)s exhibited low dielectric constants. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 55–69, 2002     

Preparation and properties of a new aromatic polyamide with an ethoxycarbonyl pendant group: Poly(4,4′‐diamino‐2′‐ethoxycarbonyl‐benzanilide terephthalamide)

A new aromatic polyamide containing a pendant ethoxycarbonyl group was successfully synthesized from the reaction between 4,4′‐diamino‐2′‐ethoxycarbonylbenzanilide and terephthaloyl chloride. The new polymer was soluble in organic solvents such as N‐methyl‐2‐pyrrolidone and dimethylacetamide, and a tough and transparent film was cast from the polymer solution with viscosities ranging from 2.6 to 5.6 dL/g. When the polymer film was heat‐treated at a temperature greater than 300 °C, a cyclization reaction occurred between the ethoxycarbonyl group and the adjacent amide bond to form a benzoxazinone unit in the polymer backbone. The thermal decomposition onset temperature of the cyclized film was about 523 °C, which was somewhat lower than that of poly(p‐phenylene terephthalamide) (PPTA; 566 °C); however, the decomposition rate was slower than that of PPTA to yield a higher char residue. The dispersion temperature of the uncyclized poly(4,4′‐diamino‐2′‐ethoxycarbonylbenzanilide terephthalamide) (PDEBTA) was about 340 °C, whereas that of the cyclized PDEBTA was not clear. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 936–942, 2000     

Poly(4,4′-dipiperidyl)amides

Polyamides from 4,4′-dipiperidyl, 1,2-ethylene-, and 1,3-propylene- bridged dipiperidyls were prepared via solution and interfacial polycondensation techniques. In sharp contrast to the polyamides from N,N′-alkyl-substituted alkylene diamines and aromatic diacids, the polyamides from 4,4′-dipiperidyls are high-melting (up to 455°C) and alcohol-insoluble. Tough films were cast from formic acid solutions of the polymers; fiber of good physical properties was prepared from a formic acid solution of the polyterephthalamide of 1,2-di(4-piperidyl)ethane.     

Synthesis and characterization of N‐benzoylated wholly aromatic polyamides from 4,4′‐oxydianilinobis(benzimidoyl) chloride and aromatic dicarboxylic acids

A novel type of polyamides, N‐benzoylated wholly aromatic polyamides, were synthesized by low‐temperature solution polycondensation of a new aromatic bis(imidoyl) chloride, 4,4′‐oxydianilinobis(benzimidoyl) chloride, with aromatic dicarboxylic acids, 4,4′‐oxydibenzoic acid and isophthalic acid. Compared with the conventional all aromatic polyamides and also N‐phenylated wholly aromatic polyamides, these N‐benzoylated aramides exhibit better solubility in organic solvents, lower glass transition temperatures and thermal stability.     

Bis(4,4′‐bipyridinium) hexa­cyano­platinate(IV) bis­(4,4′‐bipyridine)

In the title compound, (C₁₀H₉N₂)₂[Pt(CN)₆]·2C₁₀H₈N₂ or [(Hbpy)⁺]₂[Pt(CN)₆]²⁻·2bpy, where bpy is 4,4′‐bipyridine, the Hbpy⁺ cations and bpy mol­ecules form a hydrogen‐bonded two‐dimensional cationic approximately square grid parallel to the (110) plane. The [Pt(CN)₆]²⁻ dianions reside in the cavities within this grid, with the nitrile N atoms forming weak hydrogen bonds with the CH groups in the cationic lattice.     

Fully aromatic liquid crystalline homopolyesters and copolyesters of 1,1′-binaphthyl-4,4′-diol

A series of fully aromatic, thermotropic polyesters based on 1,1′-binaphthyl-4,4′-diol, BND, was prepared by the melt polycondensation method and characterized for their thermotropic behavior by a variety of experimental techniques. The homopolymer of BND with terephthalic acid formed a nematic melt at 353°C. In contrast, the polyester from BND and 2,6-naphthalenedicarboxylic acid had a melting transition, T_m, above 400°C, so it was not possible with the equipment available to determine whether it formed a nematic melt. All of the copolymers of BND formed nematic melts at much lower T_m values than those of its respective homopolymers, as expected, because of the copolymerization effect of the added monomer. Moreover, all of the copolymers had higher glass transition temperatures, T_g, than those of other liquid crystalline polyesters and higher thermal stabilities. © 1994 John Wiley & Sons, Inc.     

Polymers from 4,4′-sulfonyldiphenol

Several polymers have been prepared from 4,4′-sulfonyldiphenol (SDP) or its bis-phenate salt as the nucleophile in condensation polymerizations. Ester-sulfone-amic acid polymers were of fairly high molecular weight, and could be imidized. Soluble film-forming poly ether-ester-sulfones were prepared from diphenyl ether diacid chloride.