Synthesis of soluble quinacridones

The synthesis of 4,11-dialkylthioquinacridones and 5,12-dialkyl-4,11-dialkylthioquinacridone from o-alkylthioanilines and diethyl 2,5-dioxo-1,4-cyclohexanedicarboxylate is described. These compounds are easily soluble in organic solvents in contrast to unsubstituted quinacridone.     

具有苯烷基侧链的芳香液晶聚酯的合成及性质

以熔融缩聚方法全盛了具有苯烷基侧链取代的全芳香液晶聚酯，用TG，DSC，热台偏光显微镜研究了聚酯的热性能，并讨论了取代基对聚酯热性能的影响，所有合成的聚酯均为热致型液晶，且具有较低的相转变温度。特别是当聚对苯二甲酸对苯二酚酯的两个苯环上分别取代了叔丁基和苯烷基，或取代了两个苯烷基侧链后，聚酯的熔融温度下降到225℃以下，并可在室温下溶于普通的有机溶剂中。     

Synthesis of soluble oligocarbazole derivatives

3,6-Disubstituted carbazole building blocks are coupled via copper-catalyzed Ullmann reactions to afford trimeric and heptameric carbazoles with excellent solubilites in organic solvents. Alternatively, oligomeric carbazoles with phenylene spacers, that are more stable towards oxidation, can be obtained via palladium-catalyzed Suzuki coupling reactions.     

Influence of lateral substituents on thermal behavior and solubility of aromatic LC-polyesters

Structure - property relations of substituted para-linked aromatic homopolyesters are reported. Thermotropic liquid-crystalline substituted poly (1,4-phenylene terephthalate)s with phase transition temperatures less than 230 °C and good solubility in common organic solvents have been synthesized. If a noncoplanar 2,2′-disubstituted biphenylene moietyis combined with a monosubstituted phenylene moiety with sufficient bulky substituent, polyester with similar properties were obtained. Although these polyesters are soluble up to high concentrations, no lyotropic liquid-crystalline behavior was observable.     

Synthesis of soluble,branched polyphenyls

The cotrimerization of phenylacetylene and diethynylbenzene yields high molecular weight highly branched polyphenyls. The polymers obtained have the usual thermal stability. They are soluble in common chlorinated solvents.     

Synthesis of extremely soluble precursors of tetrabenzoporphyrins

This paper describes the preparation of dimethylbicyclo[2.2.2]octadiene-fused porphyrins as extremely soluble precursors of tetrabenzoporphyrins and thermal conversion of the precursors to tetrabenzoporphyrins.     

Synthesis and characterization of highly soluble aromatic polyimides

Two highly soluble aromatic polyimides were synthesized successfully from a diamine with two tert-butyl groups （MBTBA）and dianhydrides with a thioether or sulfone moiety（DTDA and DSDA）.Both of them showed excellent solubility in common solvents such as chloroform,tetrahydrofuran and dioxane at the room temperature.The number-average molecular weight was 6.0×10⁴ and 8.3×10⁴ according to gel permeation chromatography relative to a polystyrene standard,and the polydispersity index was 1.80 and 1.82 respectively.The glass-transition temperatures of them were 286℃and 314℃（or 315℃and 358℃）respectively,as measured by differential scanning calorimetry（or dynamic mechanical analysis）.The 5%weight loss temperature of both was near 490℃in N₂ by thermogravimetric analysis.These results indicated that the tert-butyl pendent groups reduced the interactions among polymer chains and the thioether or sulfone moiety was flexible which may improve their solubility in conventional organic solvents without the loss of thermal stability. Transparent and flexible films of the two polyimides were obtained via solution casting.The MBTBA-DTDA membrane had higher storage moduli than those of the MBTBA-DSDA membrane.     

Synthesis of soluble bis-terpyridine ligands bearing ethynylene-phenylene spacers

Soluble and rigid terpyridine-based ditopic ligands bearing one to five phenylene/ethynylene modules have been synthesized by way of a stepwise procedure. Each module is attached to the terpyridine unit via an ethynylene fragment and functionalized at the 4-position with an additional ethynylene connector and in the 2,5-positions with two flexible dodecyloxy chains. The synthetic protocol is based on sequential Pd(0)-catalyzed cross-coupling reactions between a terpyridine subunit grafted with the necessary diethynyl/phenyl or ethynylphenyl/bromide appendage. For ditopic ligands displaying an even number of phenyl/ethynylene modules, the final step involves a single cross-coupling reaction between 4'-ethynylene-2,2':6',6' '-terpyridine and the appropriate bromo derivative. In the case of the ligands having an odd number of phenylene/ethynylene fragments, a double cross-coupling reaction between an extended dibromopolyphenylene intermediate and 4'-ethynylene-2,2':6',6' '-terpyridine or 1-(4'-ethynylene-2,2':6',2' '-terpyridine)-4-ethynylene-2,5-didodecyloxy-benzene is required. For ligands I-V, optimal preparative conditions were found with [Pd(0)(PPh(3))(4)] (6 mol %) in n-propylamine at 70 degrees C. Oxidative dimerization of the 1-(4'-ethynylene-2,2':6',2' '-terpyridine)-4-ethynylene-2,5-didodecyloxybenzene derivative in the presence of cupric salts and oxygen gives the corresponding homoditopic ligand II(2)() bearing a central diphenyldiacetylene spacer. Spectroscopic data for the new oligomers are discussed in terms of the extent of pi-electron conjugation. Upon increasing the number of phenylene/ethynylene modules, there is a progressive lowering in energy of absorption and fluorescence transitions.     

Synthesis of a nonionic water soluble semiconductive polymer

A new nonionic water-soluble fluorescent conjugated polymer is reported with hydroxyl and amide side chains surrounding an aromatic polymer backbone.     

Synthesis and catalytic applications of soluble polymer-supported BINOL

The synthesis of a soluble polymer containing BINOL residues is described. Titanium-BINOLate and AlLibis(binaphthoxide) catalysts are easily generated from this polymer and applied to the asymmetric reaction of Et₂Zn with benzaldehyde and the asymmetric Michael addition, respectively. The products are obtained in good yields with high enantioselectivities.     

Synthesis of water soluble 8-substituted 5-deazaflavins

By oxidative cyclization of 5,5′-arylmethylenebis(6-methylaminouracil) derivatives with diethyl azodicarb-oxylate a number of 5-deazaisoalloxazines were synthesized having at the C(8) position a substituent that causes a bathochromic shift varying between 20 and 130 nm, depending on the substituent. To increase the solubility in aqueous media 8-substituted 5-deazaflavins were prepared having a carboxymethyl group at the N(3) position. The carboxymethyl group was introduced prior to the oxidative cyclization.     

Synthesis of a soluble poly(fluorenone)

The synthesis and characterisation of a soluble poly(fluorenone) is presented, a polymer with high electron affinity with potential for use in plastic electronic devices as an n-type material.     

Synthesis of a soluble pyrrole copolymer with phenetidine

A new series of copolymers was synthesized through the oxidative polymerization of pyrrole (PY) and o‐phenetidine (PHT) with inorganic oxidants in acidic media. The polymerization parameters including the mixing method of the oxidant with the comonomer, the comonomer ratio, the time, the temperature, the oxidant, the organic medium, and the acid were systematically optimized for the synthesis of copolymers with high yields, intrinsic viscosities, and solubility. The resultant copolymers were characterized by elemental analysis, infrared, ultraviolet–visible, solution high‐resolution ¹H NMR and solid‐state high‐resolution ¹³C NMR, circular dichroism spectroscopy, and cyclic voltammetry. The results showed that the PY observed content in the copolymers was much higher than the PY feed content. The regular variation of the polymerization yield, intrinsic viscosity, solubility, macromolecular structure, and electroactivity of the resulting polymers with the comonomer ratio, together with the complete solubility of a PY/PHT (10/90) polymer in highly polar solvents, indicated the formation of real random copolymers containing both PY and PHT units rather than a mixture of two homopolymers. However, the polymers containing more than 59 mol % PY were not homogeneous copolymers consisting of soluble and insoluble parts. A semiquantitative relationship between the polymerization yield or solubility of the copolymers and the polarity index of the organic solvents was examined. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2073–2092, 2004     

Synthesis of water‐soluble zwitterionic polysiloxanes

A series of water‐soluble siloxane polymers with pendent phosphorylcholine (PC) and sulfobetaine (SB) zwitterions was prepared using thiol‐ene “click” chemistry. Specifically, well‐defined vinyl‐substituted siloxane homopolymers and block copolymers were functionalized with small molecule zwitterionic thiols at room temperature. Rapid and quantitative substitution of the pendent vinyl groups was achieved, and zwitterionic polysiloxanes of narrow molecular weight distribution were obtained. The PC‐ and SB‐substituted polymers were found to be readily soluble in pure, salt‐free water. Critical micelle concentrations (CMCs) of these polymers in water were measured using a pyrene fluorescence probe, with CMC values estimated to be <0.01 g/L. Polymer aggregates were studied by dynamic light scattering, and the micelles generated from the PC block copolymers were visualized, after drying, by transmission electron microscopy. Aqueous solutions of these zwitterionic polysiloxanes significantly reduced the oil‐water interfacial surface tension, functioning as polymer amphiphiles that lend stability to oil‐in‐water emulsions. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 127–134     

Synthesis of soluble oligo- and polymeric pentacene-based materials

Functionalization of pentacene at the 6- and 13-positions affords versatile building blocks for oligomer and polymer formation. Di- and trimeric materials are synthesized using unsymmetrical building block 18, while symmetrical diol monomer 17 allows for the synthesis of polymers. The materials reported herein are soluble in common organic solvents and air-stable. UV-vis and fluorescence spectroscopic properties have been investigated. Solid-state X-ray crystallography of building blocks 17 and 19 shows that these derivatives can π-stack with significant acene face-to-face interactions with spacing of less than 3.5 Å.     

Synthesis and characterization of silicon-containing phenylated soluble aramids

New high molecular weight (inherent viscosities, 1.21–0.50 dL/g) aramids having silicon and pendant phenyl groups were synthesized by low temperature interfacial polycondensation technique involving the reaction of acid chlorides: bis(4-chlorocarbonylphenyl)dimethylsilane and bis(3-chlorocarbonylphenyl)dimethylsilane with diamines: 2,5-bis(4-aminophenyl)-3,4-diphenyl-thiophene and bis(4-aminophenyl)ether. Copolyamides were obtained by using different proportions of these diamines. All the polymers were completely soluble in organic solvents such as N,N-dimethylacetamide, N-methyl-2-pyrrolidone, and N,N-dimethylformamide. Thermal properties were evaluated by thermogravimetry which showed no weight loss below 325°C in both air and nitrogen atmospheres.     

Synthesis and characterization of soluble seco-porphyrazines with bulky substituents

By cyclotetramerization of 3,4-bis(4-tert-butylphenyl)pyrroline-2,5-diimine in the presence of magnesium butanolate, magnesium porphyrazinate with eight (4-tert-butylphenyl) units on the periphery has been synthesized. Its demetalation by the treatment with trifluoroacetic acid resulted in a partially oxidized product, namely, octakis(4-tert-butylphenyl)-2-seco-porphyrazine-2,3-dione. Further reaction of this product with copper(II) acetate, zinc(II) acetate, and cobalt(II) acetate led to the metallo derivatives, [octakis(4-tert-butylphenyl)-2-seco-2, 3-dioxoporphyrazinato]M(II) (M = Cu, Zn, Co). These soluble complexes have been characterized by elemental analysis, FT-IR, ¹H NMR, UV-Vis, and mass spectral data.     

Synthesis of a highly soluble superstructured phenanthroline strapped porphyrin

A highly soluble phenanthroline strapped porphyrin is prepared on multigram scale by appropriate functionalization with C₁₂ chains after the cyclization of the tetrapyrrolic macrocycle.