Mechanical properties of pyrolysed wood: a nanoindentation study

The present work focuses on changes of mechanical properties in pyrolysed spruce wood as a function of temperature up to 2400°C. Nanoindentation tests are used for the determination of mechanical properties at the scale of single wood cell walls. Hardness, indentation modulus and elasto-plastic/brittle behaviour of the carbonaceous residues are derived as function of pyrolysis temperature. Hardness values increase continuously by more than one order of magnitude to 4.5?GPa at 700°C. The indentation modulus shows complex changes with a minimum of 5?GPa around 400°C and a maximum of 40?GPa around 1000°C. The deformation induced by the indenter is largely visco-plastic in native wood, but it is almost purely elastic in the carbonaceous residue, with particular low values of the indentation ductility index around 700°C. A low density and a strongly cross-linked carbon structure may explain the mechanical behaviour at these intermediate temperatures. A final decrease of the modulus and a slight decrease of ductility for temperatures above 2000°C can be attributed to a continuous structural transition of the material towards graphite-like stacking of carbon sheets and to preferred carbon orientation along the wood cell axis.     

HL-2A装置等离子体水平位移控制

介绍了HL-2A装置等离子体水平位移反馈控制系统的硬件组成、控制流程和控制算法,反馈控制的调试过程。在相同参数放电条件下比较了等离子体位移的受控情况。等离子体位移的控制结果较为满意。     

扬声器纸盆材料动态弹性模量的新测量方法

本文从理论上对末端有负载的臂梁的自由振动频率进行了计算，并采用新的激振和拾振装置，建立一种扬声器纸盆材料的动态弹性模量的新测量方法，测量了若干纸盆试样，得出典型的幅频响应曲线，并对实验结果进行了分析。     

The effect of different chemical compositions caused by the variation of deposition potential on properties of Ni-Co films

The magnetic and microstructural properties of Ni-Co films electrodeposited at different cathode potentials were investigated. The compositional analysis revealed that the Ni content increases from 13 at.% to 44 at.% in the films with increasing deposition potential. Magnetic measurements showed that the saturation magnetization, M_s of the films decreased with increase of Ni content as the deposition potential increased. M_s values changed between 1160 emu/cm³ and 841 emu/cm³. The X-ray diffraction revealed that the crystalline structure of the films is a mixture of the predominant face-centered cubic (fcc) and hexagonal closed packed. However, the mixture phase turns to the fcc because of increasing Ni content up to 44 at.% at the highest (−1.9 V) potential by enhancing the intensity of reflections from the fcc phase. The changes observed in the magnetic and microstructural properties were ascribed to the changes observed in the chemical composition caused by the applied different deposition potentials.     

Molecular dynamics study of the mechanical characteristics of Ni/Cu bilayer using nanoindentation

<正>In the present work,a three-dimensional molecular dynamics simulation is carried out to perform the nanoindentation experiment on Ni single crystal.The substrate indenter system is modeled using hybrid interatomic potentials including the many-body potential embedded atom method(EAM),and two-body morse potential.To simulate the indentation process,a spherical indenter(diameter = 80 A,1 A=0.1 nm) is chosen.The results show that the mechanical behaviour of a monolithic Ni is not affected by crystalline orientation.To elucidate the effect of a heterogeneous interface, three bilayer interface systems are constructed,namely Ni(100)/Cu(111),Ni(110)/Cu(111),and Ni(111)/Cu(111).The simulations along these systems clearly describe that mechanical behaviour directly depends on the lattice mismatch. The interface with the smaller mismatch between the specified crystal planes is proved to be harder and vice versa.To describe the relationship between film thickness and interface effect,we choose various values of film thickness ranging from 20 A to 50 A to perform the nanoindentation experiment.It is observed that the interface is significant only for the relatively small thickness of film and the separation between interface and the indenter tip.It is shown that with the increase in film thickness,the mechanical behaviour of the film shifts more toward that of monolithic material.     

Microstructure and properties of Ni-Co/nano-Al2O3 composite coatings by pulse reversal current electrodeposition

Ni-Co/nano-Al₂O₃ (Ni-Co/Al₂O₃) composite coatings were prepared under pulse reversal current (PRC) and direct current (dc) methods respectively. The microstructure of coatings was characterized by means of XRD, SEM and TEM. Both the Ni-Co alloy and composite coatings exhibit single phase of Ni matrix with face-centered cubic (fcc) crystal structure, and the crystal orientation of the Ni-Co/Al₂O₃ composite coating was transformed from crystal face (2 0 0) to (1 1 1) compared with alloy coatings. The hardness, anti-wear property and macro-residual stress were also investigated. The results showed that the microstructure and performance of the coatings were greatly affected by Al₂O₃ content and the electrodeposition methods. With the increasing of Al₂O₃ content, the hardness and wear resistance of the composite coatings enhanced. The PRC composite coatings exhibited compact surface, high hardness, better wear resistance and lower macro-residual stress compared with that of the dc composite coatings.     

石墨炔管能带和力学性质的第一性原理研究

基于第一性原理计算,这篇文章研究了单壁锯齿型和扶手型石墨炔管的几何结构、电子结构以及杨氏模量.计算表明:石墨炔管是一类具有一定能隙的直接带隙半导体管,其带隙在0.4-1.3eV的能量范围,且随管径的增大而变小.而石墨炔管的杨氏模量在0.44-0.50Tpa区间变化.对于锯齿型石墨炔管,其杨氏模量随着半径的增大而变小而锯齿型石墨炔管的杨氏模量随其半径的增大而增大.     

单壁碳纳米管弹性性质的羟基接枝效应

用分子动力学方法研究了端口接枝不同数量羟基对扶手椅型和锯齿型单壁碳纳米管弹性模量的影响.结果表明,未接枝的扶手椅型(5, 5),(10,10)管和锯齿型(9, 0),(18, 0)管杨氏模量分别为948,901和804,860GPa.在接枝2—8个羟基情况下,锯齿型单壁碳纳米管拉伸杨氏模量基本不随接枝数量增加发生变化,而扶手椅单壁碳纳米管则不同,接枝状态下的弹性模量比未接枝状态小很多,但接枝一定数量后,其杨氏模量又略增到某一稳定值.分别从接枝后碳纳米管变形电子密度等值线结构、C—C键长和系统结合能变化规律等方面,对单壁碳纳米管弹性模量的接枝效应进行了分析. 关键词： 碳纳米管 羟基 接枝效应 杨氏模量     

激光位移传感器传感探头微小型光学系统设计

光斑质量直接影响激光位移传感器测量的精度。为了提高激光位移传感器传感探头光学系统的成像质量,设计了传感探头四片式微小型光学系统。本文在理想成像基础上,分析光束在光学系统中能量传递的变化规律,对比光电探测器的感光能力,利用光学设计软件(ZEMAX)实现了激光位移传感器传感探头微小型光学系统的设计。通过理论计算分析,严格控制传感探头孔径光阑的大小,对光学系统进行优化处理,成像最大弥散斑半径低于3. 3μm,空间分辨率120lp/mm以下的传递函数MTF(Modulation Transfer Function)值大于0. 5,光线扇形图的最大像差小于5μm,畸变量低于0. 1859%。该光学系统具有良好的成像效果,可以满足激光位移传感器探测系统对成像系统成像光斑质量的要求,以保证传感器的测量精确度优于5μm。     

空位结构缺陷对C纳米管弹性性质的影响

用分子动力学方法对不同空位缺陷的扶手椅型与锯齿型单壁C纳米管杨氏弹性模量进行了计算和分析. 结果表明：扶手椅型（5, 5）, （10,10）和锯齿型（9, 0）, （18, 0） 纳米管在无缺陷时其杨氏模量分别为948,901和804,860 GPa. 随管径的增大,扶手椅型和锯齿型单壁C纳米管弹性模量分别减小和增大,表现出完全不同的变化规律. 随着C纳米管中单点空位缺陷的均匀增加,杨氏模量下降,当缺陷比率增加到一定程度时,杨氏模量下降骤然趋缓,形成一下降平台;双空位缺陷对C纳米管杨氏模量的影响与其分布方向有关;随单点空位缺陷间原子数的增加,在轴向上,杨氏模量下降到某一值小幅波动,而在周向上杨氏模量先下降,然后上升到某一稳定值. 随两单点空位缺陷的空间距离进一步增大,杨氏模量又呈微降趋势. 通过分子间σ键与π键特征及缺陷间近程电子云耦合作用规律与空位缺陷内部5-1DB缺陷的形成特点等理论对上述规律进行了分析. 关键词： 空位缺陷 C纳米管 分子动力学 杨氏模量     

Performance evaluation of a wave-front displacement system for vectorial shearing interferometer

We describe a wave-front displacement system using a novel configuration of a pair of wedge prisms. The wave-front propagation, through the displacement system, is analyzed using the exact ray trace. The main advantage, of this configuration, is that the shearing (direction and magnitude) is constant from the displacement system to the image plane. The direction of the shearing depends on the relative orientation of the prisms. The magnitude of the shearing is proportional to the distance between prisms. The proportionality constant depends on the wedge angle and the material of fabrication of the prisms, and it gives the sensitivity to the displacement of the system. The deviation of the shearing due to the difference between the wedge angles is larger than that the produced by the oblique incidence of the wave-front. The experimental results confirm the theoretical data.     

机载激光诱导荧光遥感系统相关参数的讨论

以文献[1]所设计的机载激光诱导荧光遥感成像系统为例,简要地分析了该遥感系统的荧光参数、信噪比、飞机飞行参数与系统性能的关系。探测器接收到的荧光强度和信噪比除了与激光器发射的功率、被激发物质的荧光量子效率、密度、浓度和探测器的量子效率等成正比外,还受遥感系统的仪器结构、探测器的灵敏度、荧光寿命、阳光的反射,以及大气散射等因素的影响。给出了遥感系统的空间分辨率与飞机飞行高度和速度、激光扫描频率和脉冲发射频率之间的关系。分析结果对实际研制机载激光荧光遥感系统有重要的参考价值。     

激光诱导荧光遥感系统的设计

分别设计了地面车载 (或海面 )和空中机载激光诱导荧光雷达成像遥感系统。提出了用拼合式卡塞格仑(Cassegrainnian)望远镜结构实现多色荧光成像系统。所设计的系统可以同时获取荧光光谱信息、荧光信息成像和与荧光信息相匹配的地理信息。所设计的系统与以住的激光荧光遥感系统相比 ,增加了荧光成像功能。机载设计方案是一个适应RS、GPS、GIS一体化和“数字地球”发展要求的激光遥感空间信息集成的设计 ,具有一定的先进性。     

杨氏模量测量的研究性与综合性实验设计

通过测量悬臂梁自由阻尼振动频率等参数来计算梁状材料的杨氏模量.实验通过精心设计,涉及并运用了力传感器、惠斯通电桥、数字存储示波器、计算机接口、快速傅里叶变换和LabVIEW虚拟仪器等知识和内容.     

The study of fractal correlation method in the displacement measurement and its application

The classical digital speckle, or digital image, correlation method of deformation measurement is based on gray level correlation between unformed and deformed digital images. The pattern of artificial random speckles and the natural textures on some object's surfaces have fractal characteristics, and their fractal dimensions represent both gray and morph information. Furthermore, the fractal dimensions are stable feature parameters of the patterns. The digitized images of the patterns are confirmed to be also fractals. By this fact, a new method of displacement measurement is developed in the paper, based on the fractal dimensions correlation. The in-plane displacement fields of a body can be acquired. In order to verify the validity of the new method, an experiment has been designed and the results have been compared with those obtained from the classical digital image correlation method. The validity of the new method is not less than that of classical method. Further discussions about the traits and the developing vista of the method are given at the end.     

富营养化水体环境中COD浓度遥感监测系统设计

对富营养化水体环境中COD浓度进行遥感监测,可以预防富营养化水体环境中COD浓度增加,提高水体水质,增加水循环次数,减少水体中有机物的污染。当前富营养化水体环境中COD浓度遥感监测系统设计方法,以Modis遥感影像数据为原理,依据富营养化水体环境中COD浓度的特征提取结果,对富营养化水体环境中COD浓度进行遥感监测,没有具体对遥感监测系统进行详细地设计,无法获取富营养化水体环境中COD浓度高精度的遥感监测信息,存在遥感监测结果偏差大的问题。提出了一种基于Zigbee的富营养化水体环境中COD浓度遥感监测系统设计方法。该方法先对Zigbee的富营养化水体环境中COD浓度遥感监测系统进行硬件设计,采用IMF对富营养化水体环境中COD浓度进行特征提取,以特征提取结果为基础,依据COD浓度指数时间序列实现富营养化水体环境中COD浓度遥感监测,最后利用Retinex法对COD浓度遥感监测的图像进行处理,完成对富营养化水体环境中COD浓度的遥感监测。仿真实验结果证明,所提系统设计方法可以精确地对富营养化水体环境中COD浓度进行安全快速的遥感监测。     

大气湍流对遥感系统分辨力的影响

以平面波为例,分别针对较弱和较强的湍流模型,通过计算到达角起伏讨论了高空光学遥感系统由大气湍流引起的地面图像分辨力问题。结果表明,对于给定的遥感系统口径和高度,较强湍流引起的图像分辨力的1cm左右;而较强湍流引起的图像分辨力则可达10cm量级。对于自身的地面分辨力具有m的量级的传统光学遥感系统,上述影响并不明显。对于现代高辨力光学遥感系统,这种影响便不容忽略,特别是对较强的湍流,往往需要用自适应光学等方法加以补偿。     

A density-functional-theory-based finite element model to study the mechanical properties of zigzag phosphorene nanotubes

In this paper, the density functional theory calculations are used to obtain the elastic properties of zigzag phosphorene nanotubes. Besides, based on the similarity between phosphorene nanotubes and a space-frame structure, a three-dimensional finite element model is proposed in which the atomic bonds are simulated by beam elements. The results of density functional theory are employed to compute the properties of the beam elements. Finally, using the proposed finite element model, the elastic modulus of the zigzag phosphorene nanotubes is computed. It is shown that phosphorene nanotubes with larger radii have larger Young's modulus. Comparing the results of finite element model with those of density functional theory, it is concluded that the proposed model can predict the elastic modulus of phosphorene nanotubes with a good accuracy.     

Local elastic properties of nano-confined fluids: A density functional study

The understanding of mechanical properties of confined fluids is essential for modeling and manipulating of nano-scaled systems. Unlike the uniform phase, the confined fluids usually display different features in structure and related properties. Due to the presence of the confining geometry, the density profile and many physical and chemical properties may be position-dependent. The aim of our research is to derive an expression for the local elastic property by using the classical elastic theory. Both the bulk and shear moduli are expressed as functional of density of particle. The theoretical result derived is applied to the Lennard-Jones fluids confined in nano-cavity. Comparison of our numerical result and the simulation result is made and qualitative agreement is observed. Further, influence of bulk density, temperature and external potential on moduli is calculated and the physical mechanism is analyzed. Relationship between contact modulus and the interfacial tension is also calculated. Their opposite trend with temperature is observed.     

A study of the accuracy of mobile technology for measuring urban noise pollution in large scale participatory sensing campaigns

The study reports on the relevancy and accuracy of using mobile phones in participatory noise pollution monitoring studies in an urban context. During one year, 60 participants used the same smartphone model to measure environmental noise at 28 different locations in Paris. All measurements were performed with the same calibrated application. The sound pressure level was recorded from the microphone every second during a 10-min period. The participants frequently measured the evolution of the sound level near two standard monitoring sound stations (in a square and near a boulevard), which enables the assessment of the accuracy and relevancy of collected acoustic measurements. The instantaneous A-weighting sound level, energy indicators such as L_A,eq, L_A10, L_A50 or L_A90 and event indicators such as the number of noise events exceeding a certain threshold L_α (NNEL ? L_α) were measured and compared with reference measurements. The results show that instantaneous sound levels measured with mobile phones correlate very well (r > 0.9, p < 0.05) with sound levels measured with a class 1 reference sound level meter with a root mean square error smaller than 3 dB(A). About 10% of the measurements for the boulevard location (respectively 20% for the square) were inaccurate (r < 0.3, p < 0.05). Nevertheless, mobile phone measurements are in agreement for the L_A50 and the L_A90 acoustic indicators with the fixed station (4-m high) measurements, with a median deviation smaller than 1.5 dB(A) for the boulevard (respectively 3 dB(A) for the square).