Synthesis and enhanced photoluminescence in novel AucoreAu-Agshell nanoparticles embedded Nd-doped antimony oxide glass hybrid nanocomposites

Au_coreAu-Ag_shell nanoparticles and Nd³⁺ ions co-doped in a novel antimony(III) oxide based dielectric (glass) matrix were synthesized for the first time, by a new very simple single-step methodology involving selective thermo-chemical reduction without employing any external reducing agent. They were characterized by the evolution of UV-vis-NIR absorption and photoluminescence spectra, XRD patterns, TEM and SAED images. XRD and SAED indicate the building of core-shell nanoparticles through the formation of (1 1 1) and (2 0 0) planes whereas TEM advocates the generation of spherical and spheroidal particles of 22-107 nm sizes with various core morphologies. Photoluminescence upconversion exhibits two major emission bands of Nd³⁺ ions at 540 (green) and 649 (deep-red) nm which undergo about 5-fold intensity enhancement by the nanoparticles. Such enhancement is attributed to the local field effect induced by plasmonic Au-Ag nanoparticles to Nd³⁺ ions. These nanocomposites are promising for many nanophotonics applications.     

Synthesis of high quality and monodisperse CdS:Mn/ZnS and CdS:Mn/CdS core–shell nanoparticles

CdS:Mn²⁺/ZnS and CdS:Mn²⁺/CdS core–shell nanoparticles were synthesized in aqueous medium via chemical precipitation method in an ambient atmosphere. Polyvinylpyrrolidone (PVP) was used as a capping agent. The effect of the shell (ZnS and CdS) thickness on CdS:Mn²⁺ nanoparticles was investigated. Inorganically passivated core/shell nanocrystals having a core (CdS:Mn²⁺) diameter of 4 nm and a ZnS-shell thickness of ∼0.5 nm exhibited improved PL intensity. Optimum concentration of doping ions (Mn²⁺) was selected through optical study. For all the core–shell samples two emission peaks were observed, the first one is band edge emission in the lower wavelength side due to energy transfer to the Mn²⁺ ions in the crystal lattice; the second emission is characteristic peak of Mn²⁺ ions (⁴T₁ → ⁶A₁). The XRD, TEM and PL results showed that the synthesized core–shell particles were of high quality and monodisperse.     

MeV Au ion induced modifications at Co/Si interface

We report on room temperature MeV Au ion induced modifications at the Co/Si interfaces. Nanometers size thin film of Co and Si were grown by ultra high vacuum (UHV) electron beam evaporation technique on Si(1 1 1) surface and were irradiated by 1.5 MeV Au²⁺ ions at a fluence of 5 × 10¹⁴ ions cm⁻². High-resolution transmission electron microscopy (HRTEM) along with energy filter imaging technique has been employed to study the formation of Co-Si alloy at the interface. Formation of such surface alloy has been discussed in the light of ion-matter interaction in nanometer scale regime.     

Synthesis of a Au‐on‐Pd Heteronanostructure Stabilized by Citrate and its Catalytic Application

The preparation of Au‐on‐Pd heteronanostructure (HNS) using citrate‐stabilized polycrystalline Pd nanoparticles (NPs) as the seeds is described. The resulting Au‐on‐Pd HNS is characterized and it is found that the formation of Au‐on‐Pd HNS depends greatly on a ratio between Pd seeds and AuCl₄^? ions added and the optimal molar ratio is 10:1. If fewer AuCl₄^? ions are added (Pd/Au ratio is 100:1), the growth of Au NPs only occurs on part of the Pd seeds’ surface. The addition of more AuCl₄^? ions (Pd/Au ratio is 5:1) hinders the growth of Au NPs on the Pd seeds’ surface. To demonstrate the catalytic performance, the electrochemistry oxidation of ethanol and the reduction of p‐nitrophenol by NaBH₄ are chosen to examine the catalytic activity of Au‐on‐Pd HNS. Pd seeds, Au NPs, and poly(vinyl pyrrolidone) (PVP)‐stabilized PdAu nanoalloy are used as the references for comparison. In the first reaction, the catalytic reactivity of Au‐on‐Pd HNS is better than that of corresponding pure Pd or Au NPs, while the opposite occurs for the latter reaction. The catalytic activity of Au‐on‐Pd HNS is much higher than that of PVP‐stabilized PdAu nanoalloy.     

Glycerol oxidation reaction using PdAu/C electrocatalysts

Glycerol oxidation reactions were evaluated using PdAu/C electrocatalysts under alkaline conditions. These electrocatalysts were synthesized in different ratios (100:0, 75:25, 50:50, 25:75, and 0:100), using the borohydride reduction method. The materials were characterized with X-ray diffraction (XRD), transmission electron microscopy (TEM), and electrochemical techniques associated by in situ attenuated total reflectance Fourier transformed infrared spectroscopy (ATR-FTIR). According to the XRD diffractograms, the presence of Pd and Au (face-centered cubic (fcc)) phases and Pd-Au (fcc) alloys were detected. Cyclic voltammetry assisted by ATR-FTIR in situ and chronoamperometry experiments revealed that the addition of Au remarkably enhances the electrocatalytic activity, due to the action of bifunctional effect, with addition of the interactions of alcohoxide with hydroxylate species in gold surface, and the stability of Pd/C catalysts. Highest current density (≈4 mA mg_metal ^?1) was achieved for the catalyst Pd₅₀Au₅₀/C and Pd₇₅Au₂₅/C, which is two times higher than that achieved by Pd/C (2 mA mg_metal ^?1), demonstrating the beneficial effect of the PdAu alloy.     

Shape and size transformation of gold nanorods (GNRs) via oxidation process: A reverse growth mechanism

The anisotropic shape transformation of gold nanorods (GNRs) with H₂O₂ was observed in the presence of “cethyl trimethylammonium bromide” (CTAB). The adequate oxidative dissolution of GNR is provided by the following autocatalytic scheme with H₂O₂: Au⁰ → Au⁺, Au⁰ + Auⁿ⁺ → 2Au³⁺, n = 1 and 3. The shape transformation of the GNRs was investigated by UV-vis spectroscopy and transmission electron microscopy (TEM). As-synthesised GNRs exhibit transverse plasmon band (TPB) at 523 nm and longitudinal plasmon band (LPB) at 731 nm. Upon H₂O₂ oxidation, the LPB showed a systematic hypsochromic (blue) shift, while TPB stays at ca. 523 nm. In addition, a new emerging peak observed at ca. 390 nm due to Au(III)-CTAB complex formation during the oxidation. TEM analysis of as-synthesised GNRs with H₂O₂ confirmed the shape transformation to spherical particles with 10 nm size in 2 h, whereas centrifuged nanorod solution showed no changes in the aspect ratio under the same condition. Au³⁺ ions produced from oxidation, complex with excess free CTAB and approach the nanorods preferentially at the end, leading to spatially directed oxidation. This work provides some information to the crystal stability and the growth mechanism of GNRs, as both growth and shortening reactions occur preferentially at the edge of single-crystalline GNRs, all directed by Br⁻ ions.     

Metallophilic Bond‐Induced Quenching of Delayed Fluorescence in Au25@BSA Nanoclusters

The metallophilic bond is a weak interaction between closed‐shell ions and has been widely used a probe for various sensing of toxic chemicals for environmental safety concerns. Here, the interaction between Au nanoclusters (NCs) and metallic ions (mercury (Hg²⁺) and copper (Cu²⁺) ions) is explored using steady‐state and time‐resolved luminescence and transient absorption measurements. For Hg²⁺ ions, the delayed fluorescence (DF) of bovine serum albumin (BSA) protected Au₂₅ (Au₂₅@BSA) NCs is quenched via an effective triplet state electron transfer through the metallophilic bond. However, the Cu²⁺ ions do not alter the DF in Au₂₅@BSA NCs because of the absence of the metallophilic interaction. Furthermore, for Au₈@BSA and Au₁₀@histidine, in which there are no Au⁺ ions on the surface, the fluorescence is not quenched by Hg²⁺ ions. Such a novel triplet electron transfer process through metallophilic bonds are observed and reported for the first time. The reduction of the reverse intersystem crossing is the crucial for Hg²⁺ ion sensing in the fluorescent Au₂₅@BSA NCs.     

Sensitized luminescence through nanoscopic effects of ZnO encapsulated in SiO2:Tb sol gel derived phosphor

Terbium (1 mol%) doped ZnO-SiO₂ binary system was prepared by a sol-gel process. Nanoscopic effects of ZnO on the photoluminescence (PL) and the cathodoluminescence (CL) properties were studied. Defects emission from ZnO nanoparticles was measured at 560 nm and the line emission from Tb³⁺ ions in SiO₂:Tb³⁺ and ZnO-SiO₂:Tb³⁺ with a major peak at 542 nm was measured. The PL excitation wavelength for 542 nm Tb³⁺ emission was measured at ∼320 nm in both SiO₂:Tb³⁺ and ZnO-SiO₂:Tb³⁺. The CL data showed quenched luminescence of the ZnO nanoparticles at 560 nm from a composite of ZnO-SiO₂:Tb³⁺ and a subsequent increase in 542 nm emission from the Tb³⁺ ions. This suggests that energy was transferred from the ZnO nanoparticles to enhance the green emission of the Tb³⁺ ions. The PL and CL properties of ZnO-SiO₂:Tb³⁺ binary system and possible mechanism for energy transfer from the ZnO nanoparticles to Tb³⁺ ions are discussed.     

The adsorption and reaction of CO and O2 on PdAu alloy wires

Temperature programmed desorption (TPD) of CO and O₂ on PdAu alloy wires has been studied. The heat of adsorption, sticking coefficient and maximum coverage of CO were recorded for Pd, 83 Pd 17 Au, 60 Pd 40 Au. For Pd and Pd-rich alloys the heat of adsorption remained fairly constant but the maximum coverage fell markedly from 0.42 for Pd to less than 0.05 for bulk palladium atom fraction X_B^pd ? 0.83. The heat of adsorption, sticking coefficient and maximum coverage of O₂ were investigated for pure Pd. A very limited adsorption was recorded on 83 Pd 17 Au and none on the more Au-rich alloys. The adsorption data are used to discuss the CO + O₂ reaction. Activation energy and frequency factor are estimated on Pd, for the TPD conditions used here. Earlier rate constants (0.2 Torr, 150°C) for CO + O₂ on PdAu as a function of Au content correlates with the maximum coverage of chemisorbed CO, which in turn is correlated with the probability of finding a Pd_9±1 ensemble in the surface. Modern results on the d-band structure of the PdAu alloys suggest that the Pd₉ ensemble, i.e. a surface Pd atom without an Au atom in its coordination shell, would tend to optimise both the donor and acceptor actions of the Pd atoms involved in chemisorbing CO.     

Carbon monoxide adsorption on Pd-deposited Cu(1 1 0) surface: Infrared reflection absorption and temperature programmed desorption studies

We investigated carbon monoxide (CO) adsorption and desorption behaviors on 0.1-nm-, 0.15-nm-, and 0.3-nm-thick-Pd-deposited Cu(1 1 0) surfaces using infrared reflection absorption (IRRAS) and temperature-programmed desorption (TPD) spectroscopic methods. CO was exposed to the 0.1-nm-thick-Pd/Cu(1 1 0) surface at the substrate temperature of 90 K. The IR band attributable to CO bonded to Cu atoms emerged at 2092 cm⁻¹: the band was located at 2100 cm⁻¹ at saturation coverage, with a shoulder at 2110 cm⁻¹. In addition to these bands, weak absorptions attributable to the PdCO bonds appeared at 2050 and 1960 cm⁻¹. With increasing Pd thickness, the Pd related-bands became increasingly prominent. Particularly at the early stage of exposure, the band at 2115 cm⁻¹ became visible. The band at 2117 cm⁻¹ dominated the spectra all through the exposures for the 0.3-nm-thick-Pd surface. The TPD spectra of the surfaces showed two remarkable features at around 220-250 and 320-390 K, ascribable ,respectively, to CuCO and PdCO. The desorption peaks shifted to higher temperatures with increasing Pd thickness. Based on the TPD and IRRAS results, we discuss the adsorption-desorption behaviors of CO on the Pd/Cu(1 1 0) surfaces.     

高指数晶面Au-Pd纳米合金粒子的稳定结构研究

基于蒙特卡罗方法, 本文采用了紧束缚势和量子修正Sutton-Chen型多体势两种势能函数对具有不同比例、不同尺寸二十四面体Au-Pd合金纳米粒子的稳定结构、表面原子分布、核壳分布和化学短程序值进行了研究分析. 结果表明: 两种势函数得到的表面原子分布趋势一致, 即Au-Pd合金纳米粒子中的Au原子趋向于分布在纳米粒子的外层, 而Pd原子趋向于分布在纳米粒子的内层, 这有利于降低纳米粒子的总能; 在Au原子比例较小时, 两种势函数下得到的稳定结构均呈现出核壳分离的结构, 随着Au比例的增大, 紧束缚势函数下得到的纳米粒子稳定结构将趋向于洋葱状的多壳层的结构; 相比于紧束缚势, 量子修正Sutton-Chen型多体势作用下得到的Au-Pd纳米粒子的稳定结构偏聚程度更高.     

不同Ag壳厚度Au@Ag纳米粒子的调控制备表征及表面增强拉曼光谱的效应

采用化学还原法制备了以Au为核、包覆Ag的双金属核壳Au@Ag纳米粒子,并成功地用于表面增强拉曼光谱(SERS)分析测试。通过改变制备液中Ag/Au的量比来调控Ag壳包覆厚度。采用透射电子显微镜(TEM)和紫外-可见光谱仪(UV-Vis)对Au@Ag纳米粒子的构貌进行表征。TEM显示明显存在核壳结构,且Ag壳层随Ag/Au的量比的增加而逐渐变厚;UV-Vis表明随着Ag/Au的量比的增加,Au@Ag纳米粒子出现了Au核与Ag壳吸收峰的2个等离子体共振峰,同时伴随着Au峰的蓝移和Ag峰的红移。以双甲脒为分析物,考察了不同Ag/Au的量比时的Au@Ag纳米粒子的SERS活性。结果表明,SERS活性随Ag/Au的量比的增加先增大后减小,在6∶5时其SERS增强效应最佳,此时Ag壳厚度约为6 nm。以对巯基苯胺(4-ATP)、结晶紫(CV)和双甲脒为分析测试对象,对比了Au@Ag、Ag、Au 3种基底的SERS活性。结果表明,所制备的Au@Ag纳米粒子的SERS活性要明显优于单纯的Au、Ag纳米粒子。     

Au-Pd共晶纳米粒子熔化行为的分子动力学研究

采用分子动力学方法结合嵌入原子势, 对Au-Pd共晶纳米粒子的热稳定性进行了模拟研究. 计算结果表明: Au-Pd纳米粒子的熔点明显高于Au单质纳米粒子而低于Pd纳米粒子. 通过计算Lindemann指数发现Au-Pd共晶纳米粒子中的Au原子首先熔化, 然后带动Pd原子的熔化; 熔化所经历的温度区间明显要宽于单质纳米粒子.     

Adsorption and photocatalytic degradation of methylene blue on Zn1−xCuxS nanoparticles prepared by a simple green method

Nanoparticles of Zn_1−xCu_xS with various dopant contents (0 ≤ x ≤ 0.15) were prepared in water by refluxing for 90 min at about 95 °C. Powder X-ray diffraction (XRD) patterns of the nanoparticles demonstrate that loading of Cu²⁺ ions does not change the crystal structure of ZnS. Scanning electron microscopy (SEM) images demonstrate that size of the nanoparticles decreases with increasing Cu²⁺ ions. UV-Vis diffuse reflectance spectra (DRS) of the nanoparticles show significant absorption in visible light region. Adsorption capacity of the nanoparticles for methylene blue (MB) increases with mole fraction of copper ions. Photocatalytic activity of the nanoparticles toward photodegradation of MB was evaluated under visible light irradiation. The results indicate that Zn_0.85Cu_0.15S nanoparticles exhibit highest photocatalytic activity among the prepared samples. Moreover, effects of refluxing time applied for preparation of the nanoparticles and calcination temperature were investigated.     

Electrical and chemical characteristics of nano-meter gold encapsulated in mesoporous and microporous channels and cages of FSM-16 and Y zeolites

The dc and ac conductivities as well as the dielectric constant () were measured for different zeolites encapsulated gold (AuCl₃) samples at different temperatures (300-500 K) and various frequencies (5 kHz-1 MHz). The conductivity was found to change in the order Au/FSM-27>Au/NaY>Au/FSM-47. Sorbed water contained inside zeolites assists greatly the proton mobility (zeolite protons) and the ion mobility (Na⁺ and Au⁺) and hence enhance the electric conduction in the temperature range 300-373 K. Raising the temperature over 373 K induces dehydration effect that assists the metallic gold formation and thus a dramatic loss in conductivity was revealed. The conduction mechanism was expected to be partially ionic and partially electronic. The IR study showed that the exposure of Au zeolites to CO gas produced a characteristic band of Au⁺-CO at 2180 cm⁻¹ that tends to decrease with temperatures and even vanishes at 376 K in favor of Au⁰-CO at 2128 cm⁻¹. Similarly, a phase transition at 338 K, that occurs in the range 300-376 K, was confirmed by DTA to further emphasize the temperature regions of either Au⁺ cations (338 K) or Au⁰ (376 K) formation.     

Thiolated cyclodextrin self-assembled monolayer-like characterized with secondary ion mass spectrometry

In the work the focus is on the preparation of self-assembled monolayer-like films consisting of thiolated cyclodextrin on gold substrate and a characterization by using secondary ion mass spectrometry. The short (1 min) and long (1 h) time preparations of self-assembled monolayer-like films, resulting in submonolayer and monolayer regimes, are investigated, respectively. The observed species of thiolated cyclodextrin (M as molecular ion) self-assembled monolayer-like films are assigned to three groups: Au_xH_yS_z clusters, fragments with origin in cyclodextrin molecule associated with Au, and molecular ions. The group of Au_xH_yS_z (x = 2-17, y = 0-2, z = 1-5) clusters have higher intensities than other species in the positive and even more in negative mass spectra. Interestingly, the dependence between the number of Au and S atoms shows that with the increasing size of Au_xH_yS_z clusters up to 11 Au atoms, the number of associated S atoms is also increasing and then decreasing. Molecular species as (M−S+H)Na⁺, (M+H)Na⁺, AuMNa⁺, (M₂−S)Na⁺, and M₂Na⁺ are determined, and also in cationized forms with K⁺. The intensities of thiolated cyclodextrin fragments at the long time preparation are approximately 10 times higher than the intensities of the same fragments observed at the short time. The largest observed ions in thiolated cyclodextrin self-assembled monolayer-like films are AuM₂ and Au₂M. The thiolated cyclodextrin molecular ions are compared with hexadecanethiol molecular ions in the form of Au_xM_w where the values of x and w are smaller for thiolated cyclodextrin than for hexadecanethiol. This result is supported with larger, more compact, and more stabile thiolated cyclodextrin molecule.     

Infrared reflection absorption spectral study for CO adsorption on Pd/Pt(1 1 1) bimetallic surfaces

Infrared reflection absorption spectroscopy (IRRAS) was used to investigate carbon monoxide (CO) adsorption on 0.15 nm-thick-0.6 nm-thick Pd-deposited Pt(1 1 1) bimetallic surfaces: Pd_x/Pt(1 1 1) (where x is the Pd thickness in nanometers) fabricated using molecular beam epitaxial method at substrate temperatures of 343 K, 473 K, and 673 K. Reflection high-energy electron diffraction (RHEED) measurements for Pd_0.15-0.6 nm/Pt(1 1 1) surfaces fabricated at 343 K showed that Pd grows epitaxially on a clean Pt(1 1 1), having an almost identical lattice constant of Pt(1 1 1). The 1.0 L CO exposure to the clean Pt(1 1 1) at room temperature yielded linearly bonded and bridge-bonded CO-Pt bands at 2093 and 1855 cm⁻¹. The CO-Pt band intensities for the CO-exposed Pd_x/Pt(1 1 1) surfaces decreased with increasing Pd thickness. For Pd_0.3 nm/Pt(1 1 1) deposited at 343 K, the 1933 cm⁻¹ band caused by bridge-bonded CO-Pd enhanced the spectral intensity. The linear-bonded CO-Pt band (2090 cm⁻¹) almost disappeared and the bridge-bonded CO-Pd band dominated the spectra for Pd_0.6 nm/Pt(1 1 1). With increasing substrate temperature during the Pd depositions, the relative band intensities of the CO-Pt/CO-Pd increased. For the Pd_0.3 nm/Pt(1 1 1) deposited at 673 K, the linear-bonded CO-Pt and bridge-bonded CO-Pd bands are located respectively at 2071 and 1928 cm⁻¹. The temperature-programmed desorption (TPD) spectrum for the 673 K-deposited Pd_0.3 nm/Pt(1 1 1) showed that a desorption signal for the adsorbed CO on the Pt sites decreased in intensity and shifted ca. 20 K to a lower temperature than those for the clean Pt(1 1 1). We discuss the CO adsorption behavior on well-defined Pd-deposited Pt(1 1 1) bimetallic surfaces.     

PdSi based ohmic contact on n-InP

The electrical and microstructural properties of the PdSi based ohmic contacts on n-InP are discussed in the research. A low specific contact resistance of 2.25 × 10⁻⁶ Ω cm² is obtained on Au/Si/Pd/n-InP contact after rapid thermal annealing (RTA) at 450 °C for 30 s. The low contact resistance can be maintained at the order of 10⁻⁶ Ω cm² even up to 500 °C annealing. From the Auger analysis, it is found that both the outdiffusion of In and the indiffusion of Si into the InP surface occurred at the ohmic contact sample. The formation of the Pd₃Si compound lowered the barrier of the contact. The reactions between Pd and InP of the contact, forming In vacancies, and leading the doping of Si to the InP contact interface.     

Formation of nanocrystalline TiO2 by 100 MeV Au

Nanocrystalline TiO₂ structures are formed by irradiation of 100 MeV Au⁸⁺ ion beam on amorphous thin films of TiO₂. Surface morphology of the nanocrystals is studied by Atomic Force Microscopy (AFM). Amorphous to nanocrystalline phase transformation is identified by Glancing Angle X-ray Diffraction (GAXRD) and Raman spectroscopic studies. Optical characterization is carried out by UV-VIS spectroscopy technique. Blue shift observed in absorption band edge indicates the formation of nanophase TiO₂ after irradiation. The impinging swift heavy ion (100 MeV Au⁸⁺) induces nucleation of nanoparticles along the ion trajectory through inelastic collisions of the projectile with electrons of the material. It is observed that the shape and size of nanoparticles formed is dependant on the irradiation fluence.