Structural and Electrical Properties of PZT/PVDF Piezoelectric Nanocomposites Prepared by Cold-Press and Hot-Press Routes

The 0-3 PZT/PVDF piezoelectric composites are prepared separately by hot-press and cold-press processes. The effects of the PZT content and the shaping-process on the composites are studied. The experimental results indicate that composites with 70% PZT nanopowders prepared by the hot-press method exhibit excellent piezoelectric and dielectric properties. The maxima of d₃₃ and ε of the composites prepared by hot-press method are about 30% and 65% higher than those prepared by the cold-press method, respectively. This is mainly attributed to the favourable coupling of the two materials in the process of the hot press and the formation of the β-type PVDF, which possesses better electric properties.     

Flexible ceramic–polymer composite films with temperature-insensitive and tunable dielectric permittivity

BaTiO₃–polymer composite layers have been produced by the spin-on technique (thickness 3–10 μm). The dielectric permittivity of the layers at room temperature can be tuned from 2.8 to approximately 33 by varying the ceramic filling from 0 to 60% by volume. The dielectric properties of the films are almost insensitive to temperature variations in the range 20–180 °C. Free-standing composite layers with ceramic content ≤50% are flexible without noticeable change of permittivity after repeated mechanical bending. Received: 22 November 2001 / Accepted: 24 November 2001 / Published online: 23 January 2002     

Unique dielectric properties in polyaniline/poly(vinylidene fluoride) composites induced by temperature variation

To explore an effect of temperature on the dielectric properties in polyaniline/poly(vinylidene fluoride) (PANI/PVDF) composites, the dielectric properties of these composites with different volumetric fractions of PANI (?_PANI) were studied in a wide temperature range. An increase in the effective conductivity (σ_eff) and dielectric permittivity (?_eff) was observed with increasing temperature in all PANI/PVDF composites. Particularly, for the composite with ?_PANI = 0.01, less than the percolation threshold (?_C = 0.045), the increase in σ_eff and ?_eff was most significant. A tunneling effect could be responsible for the unique dielectric properties. The results provided us useful information related to the microstructure of composites, which was not reported previously. (© 2008 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Complex permittivity and microwave absorption properties of carbon nanotubes/polymer composite: A numerical study

Based on an equivalent resistance-capacitance (RC) network, we investigate theoretically the complex permittivity and microwave absorption properties of carbon nanotubes (CNTs)/polymer composite in the frequency range of 50 MHz-3 GHz using the logarithmic mixing rule. Both the real and imaginary parts of the permittivities of CNTs and polymer are considered in detail. The simulated results show that the real and imaginary permittivities of the composite increase explicitly with increasing volume fraction of CNTs, and the latter is more sensitive. The calculated complex permittivity spectra of the composite are in good agreement with the available experimental data. In addition, a good linear relationship between microwave absorbance and frequency is found.     

Dipolar-glass-like behaviour of 0.7PMN-0.3PZ ceramic

Relaxor ferroelectric behaviour has been observed for lead magnesium niobate-lead zirconate (0.7PMN-0.3PZ) ceramic. The freezing temperature obtained from fitting of dielectric data to the Vogel-Fulcher equation is very close to the dielectric-maximum temperature and to the temperature of collapse of remanant polarization. The temperature dependence of the spontaneous polarization follows a modified Neel's equation. Specific-heat measurement shows canonical glass-like behaviour, and the value of the glass-transition temperature is very close to the freezing temperature obtained from the Vogel-Fulcher equation. All the observations together indicate that 0.7PMN-0.3PZ ceramic behaves like a dipolar glass.     

Modeling and Computing Example for Effective Electromagnetic Parameters of Multiphase Composite Media

A method using strong fluctuation theory （SFT） to compute the effective electromagnetic parameters of multiphase composite media, and common materials used to design radar-absorbing materials, is demonstrated. The effective electromagnetic parameters of ultrafine carbonyl-iron （DT-50） and fiber fabric, which are both multiphase composite media and represent coated and structured radar absorbing materials, respectively, are investigated, and the corresponding equations of electromagnetic parameters by using the SFT are attained. Moreover, we design a program to simplify the solutions, and the results are discussed.     

Electromechanical properties and dielectric behavior of (Bi1/2Na1/2)(1−1.5x)BixTiO3 lead-free piezoelectric ceramics

Bismuth doped bismuth sodium titanate ceramics [(Bi_1/2Na_1/2)_(1−1.5x)Bi_xTiO₃, x=0 to 0.06] were prepared, and the resulting effects on the microstructure and dielectric properties were examined. All of the Bi-doped ceramics exhibited a single phase of perovskite structure with rhombohedral symmetry. The poling leakage current was significantly reduced by the doping of Bi, facilitating the poling process of the ceramics. The doping with Bi enhances the piezoelectric properties and increases the dielectric constant and the dielectric loss of the ceramics. At 2 mol% Bi-doping level, the ceramics exhibit a large remanent polarization of 47 μC/cm² and a relatively low coercive field of 71 kV/cm, while their d₃₃ and k_p reach a maximum value of 95 pC/N and 21%, respectively.     

Electromagnetic Parameters Model and Microwave Absorption for Composite Coatings Containing Magnetic Particles

Considering the eddy current effect of the magnetic metal particles in a high frequency electromagnetic field, we extend the Maxwell-Garnett law by introducing the eddy-effect parameter A which is as functions of the radius, permeability and electric conductivity of the metal particle medium. It is obvious that the computational result agrees with the experiment, which indicates that the extended Maxwell-Garnett law can be used to predict the effective electromagnetic parameters of a dilute metal-insulator composite medium in a high-frequency electromagnetic field.     

Microwave properties of composites with glass coated amorphous magnetic microwires

The complex permittivity and permeability of composites filled with Fe-based microwires are measured in a coaxial line at frequencies from 0.01 to 10 GHz.The samples under study consist of closely packed wire sections with various orientations relative to wave vector. The composites, where the wires are collinear to the coaxial axis, are found to be low permeable. Their permittivity has frequency dispersion governed by the length of the wire and its linear impedance. The middle section of the wire has higher impedance than that of the end sections where the regular domain structure is distorted. Magnetic bias parallel to the wire axis affects the linear impedance and parameters of dielectric absorption of a composite, the effect is proportional to bias strength. The samples of a coil-type structure, where the wires are wound around the coaxial axis, display the intensive magnetic absorption attributed to the domain wall motion. The absorption takes place in the megahertz band, at microwaves the permeability is close to unity. The microwave properties of diluted composites filled with randomly oriented permeable wires are discussed.     

High-Temperature Dielectric Response and Multiscale Mechanism of SiO2/Si3N4 Nanocomposites

The high-temperature dielectric properties of SiO₂/Si₃N₄ nanocomposites are investigated theoretically and experimentally. Its permittivities and loss tangents at the temperature ranging from room temperature to 1300°C at 9.0GHz are measured by the resonant cavity method. The SiO_2/Si₃N₄ nanocomposites show complex dielectric behaviour at elevated temperature, and a multi-scale model is proposed to describe the dependence of the dielectric properties in the SiO₂/Si₃N₄ on its compositional variations. Such a theory is needed so that the available property measurements could be extrapolated to other operating frequencies and temperatures.     

Dielectric characteristics and polarization response of lead-free ferroelectric (Bi0.5Na0.5)0.94Ba0.06TiO3-P(VDF-TrFE) 0-3 composites

Bismuth sodium barium titanate/poly(vinylidene fluoride-trifluoroethylene) 70/30 [(Bi_0.5Na_0.5)_0.94Ba_0.06TiO₃-P(VDF-TrFE)] 0-3 composites were prepared by a hot-press method for different volume fractions of (Bi_0.5Na_0.5)_0.94Ba_0.06TiO₃ ceramic powder in a P(VDF-TrFE) 70/30 copolymer matrix. The relative permittivity and dielectric loss of the composites increased with increase in the volume fraction of the ceramics, which well follows the Bruggeman model. The polarization responses of the composites were strongly dependent on the ceramic volume fraction. The composites with a higher ceramic volume fraction showed an increase in remanent polarization. At room temperature, a 0.3(Bi_0.5Na_0.5)_0.94Ba_0.06TiO₃-0.7P(VDF-TrFE) composite showed a relative permittivity ε_r=30, remanent polarization and coercive field      

Effective Dielectric Response of Nonlinear Composites of Coated Metal Inclusions

The effective dielectric response of the composites in which nondilute coated metal particles are randomly embedded in a linear host is investigated. Two types of coated particles are considered, one is that the core is nonlinear, the other is that the shell is nonlinear. We derive general expressions for the effective linear dielectric function and the effective third-order nonlinear susceptibility, and take one step forward to perform numerical calculations on the coated metal/dielectric composites. Numerical results show that the effective linear and nonlinear dielectric responses can be greatly enhanced near the surface plasmon resonant frequency. Moreover, the resonant peaks are found within a range from 0.46ωp to 0.57ωp for spherical particles and from 0.59ωp to 0.70ωp for cylindrical inclusions. In the frequency region, the resonant peak can achieve the maximum, according to an optimal structural parameter and volume fraction. The resonant frequency exhibits a redshift with the increasing structural parameter k or volume fraction f or dimensionality factor D.     

Nonlinear Localization due to a Double Negative Defect Layer in a One-Dimensional Photonic Crystal Containing Single Negative Material Layers

We investigate the effects of introducing a defect layer negative material layers on the transmission properties in a one-dimensional photonic crystal containing single The width of the defect layer is taken to be the same or smaller than the period of the structure. Different cases of the defect layer being linear or nonlinear and double positive or double negative are discussed. It is found that only a nonlinear double negative layer gives rises to a localized mode within the zero-Φeff gap in this kind of structure. It is also shown that the important characteristics of the nonlinear defect mode such as its frequency, its FWHM and the threshold of the associated bistability can be controlled by changing the widths of the defect layer and the host layers.     

Properties of the angular gap in a one-dimensional photonic band gap structure containing single negative materials

Properties of the angular gap in a one-dimensional photonic band gap structure containing single negative materials are investigated. This gap forms at oblique incidence due to the total internal reflection into air when the Snell's law breaks down. Its lower edge occurs at the frequency where the refractive index of one or both layers of the structure approaches zero. This gap is found to be highly sensitive to the incident angle and the polarization of the incident light, but is not affected by the thickness ratio of the layers. It is also shown that the electric field gets extremely enhanced at the lower edge of this gap for transverse magnetic polarization. This highly enhanced electric field can be utilized for certain applications.     

Dielectric behavior of TiC–PVDF nanocomposites

TiC/PVDF nanocomposite is prepared via simple blending and hot pressing route. Percolation theory was employed to explain the dielectric behavior of the TiC/PVDF composites. The dependence of the dielectric properties of the composite on both volume fraction of the filler and frequency is investigated. High dielectric constant (? = 540) and low loss (tan δ = 0.48) of the composites at 100 Hz have been observed near the percolation threshold (0.12). The composites show a weak frequency dependence towards the high frequency range (10–100 kHz), regardless of the TiC content. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Effects of Interfacial Polarization on Voltage Tunability of Pb(Fe1/2Nb1/2)1-xTixO3 Single Crystals

The voltage tunability of Pb(Fe_1/2Nb_1/2)_1-xTi_xO₃ single crystals is investigated at a low electric field (<130 V/cm) in a low frequency range (<1 MHz). The results show that the capacitance is strongly suppressed by the applied dc biases for both the rhombohedral sample and the tetragonal sample. A negative voltage tunability is only detected in the tetragonal sample. The origin of the giant tunability and the negative tunability is discussed based on the multipolarization-mechanism model and the equivalent circuit model, respectively. It is ascribed to the interfacial polarization at the interface of electrode/sample.     

Magnetic Behaviour of Sm2Co7/Fe/Sm2 Co7, Nanocomposite Trilayers with Cr and Ti Additions

Trilayered Sm2Co7/Fe/Sm2Co7 spring exchange magnets are fabricated by dc magnetron sputtering on MgO substrates. Very thin layers （0.3-0.7 nm） of Cr and Ti are added at the interfaces of the two magnetic phases. The thickness of StucCo7 is kept at 20nm and Fe at 6nm while the thickness of Cr and Ti are varied as 0.3, 0.5, and 0.7nm. The base pressure of sputtering chamber is kept below 10^-7 Torr and Ar pressure at 3-8m Torr. The samples are characterized by x-ray diffraction （XRD） and SQUID magnetometer. We report improvement in exchange coupling of nonacomposite magnets by addition of thin layers of Cr at interfaces.     

Enhanced Laser Cooling of Rare-Earth-Ion-Doped Composite Material

We predict enhanced laser cooling performance of rare-earth-ions-doped glasses containing nanometre-sized ultrafine particles, which can be achieved by the enhanucement of locai field around rare earth ions, owing to the surface plasma resonance of small metallic particles. The influence of energy transfer between ions and the particle is theoretically discussed. Depending on the particle size and the ion emission quantum efficiency, the enhancement of the absorption is predicted. It is concluded that the absorption are greatly enhanced in these composite materials, the cooling power is increased as compared to the bulk material.     

Maxwell-Wagner characterization of dielectric relaxation in Ni0.8Zn0.2Fe2O4/Sr0.5Ba0.5Nb2O6 composite

Dense composites were prepared through incorporating the dispersed Ni_0.8Zn_0.2Fe₂O₄ ferromagnetic particles into Sr_0.5Ba_0.5Nb₂O₆ ferroelectric matrix. Extrinsic dielectric relaxation and associated high permittivities of the materials are reported in the composites. We used an ideal equivalent circuit to explain electrical responses in impedance formalism. A Debye-like relaxation in the permittivity formalism was also found. Interestingly, real permittivity (ε′) of the sample containing 30% Ni_0.8Zn_0.2Fe₂O₄ shows obvious independence of the temperature at 100 kHz. Dielectric relaxation and high-ε′ properties of the composites are explained in terms of the Maxwell-Wagner (MW) polarization model.