The electronic behaviors of TiO2/MnO2/carbon clusters composite materials obtained by the calcination of a TiO(acac)2/Mn(acac)3/epoxy resin complex

The calcination of a TiO(acac)₂/Mn(acac)₃/epoxy resin complex under an oxygen atmosphere successfully produced nano-sized TiO₂/MnO₂/carbon clusters composite material. The surface characterizations of the resulting composites indicate that they are composed of nano-sized particles of TiO₂, MnO₂ and carbon clusters. ESR spectral examination suggests the possibility of an electron transfer in the process of MnO₂ → carbon clusters → TiO₂. The visible light-responsive oxidation–reduction function of the composite materials has also been confirmed.     

Emission analysis of Eu:MgLaLiSi2O7 powder phosphor

Newly synthesized reference MgLaLiSi₂O₇ and red luminescent Eu³⁺:MgLaLiSi₂O₇ powder phosphors have been successfully developed by a solid-state reaction method to analyze their emission and structural properties from the measurement of their XRD, SEM, FTIR and PL spectra. Emission spectra of Eu³⁺ powder phosphors have shown strong red emissions at 613 nm (⁵D₀→⁷F₂). These phosphors have also shown bright red emissions under a UV source. Based on the red emission performance, the Eu³⁺ concentration has been optimized to be at 0.3 mol%.     

Synthesis and characterization of ZrO2/MnO2/carbon clusters nanocomposite materials

Nano-sized ZrO₂/MnO₂/carbon clusters composite materials has been successfully obtained by the calcination of a Zr(acac)₄/Mn(acac)₃/epoxy resin complex under an oxygen atmosphere. The compositions of the resulting composite materials were determined using inductively coupled plasma (ICP) spectroscopy, elemental analysis and surface characterization by X-ray diffraction (XRD), scanning electron microscopy and transmission electron microscopy (TEM). The ultraviolet–visible (UV–VIS), X-ray photoelectron spectra (XPS) and electron spin resonance (ESR) spectra of the composites were also measured. ESR spectral examinations suggest the possibility of an electron transfer in the process of MnO₂ → carbon clusters → ZrO₂. The visible light-responsive oxidation–reduction ability of the calcined material was also investigated.     

Visible light-sensitive MnO2- and CeO2-loaded ZrO2/carbon cluster/Pt nanocomposite materials

Nano-sized ZrO₂/carbon cluster composite materials (I_c’s) were successfully prepared by the calcination of ZrOCl₂/starch complex I. I_c’s were found to reduce methylene blue under the irradiation of visible light (λ > 460 nm). The materials obtained by calcining at 400 and 500 °C were selectively loaded with Pt particles to obtain Pt-loaded ZrO₂/carbon cluster composite materials denoted as I_c400Pt and I_c500Pt, respectively. In addition, the resultant materials were modified with MnO₂ and CeO₂ particles to achieve MnO₂- and CeO₂-loaded ZrO₂/carbon cluster/Pt composite materials denoted as I_c400PtMn, I_c500PtMn, I_c400PtCe and I_c500PtCe, respectively. The metal oxides-loaded ZrO₂/carbon cluster/Pt composite materials thus synthesized could decompose an aqueous silver nitrate solution by visible light irradiation to give Ag and O₂ with the [Ag]/[O₂] ratios of ca. 4. Visible light-irradiated water splitting examinations with I_c400PtMn and I_c400PtCe were also investigated and found to yield H₂ and O₂ with the [H₂]/[O₂] ratios of ca. 2.     

Preparation of Fe2O3/SrTiO3 composite powders and their photocatalytic properties

Fe₂O₃/SrTiO₃ composite powders have been prepared and their photocatalytic activities were investigated by photooxidizing methanol. These powders were characterized by ultraviolet (UV)-visible diffuse reflectance spectra, scanning electron microscope (SEM) and X-ray diffraction (XRD). The results showed that the Fe₂O₃/SrTiO₃ composite powders with optimum proportion exhibited higher photocatalytic activity than pure SrTiO₃, Fe₂O₃ and TiO₂ (P25) under visible light (λ>440 nm) irradiation. The SEM image of the composite powders showed that SrTiO₃ and Fe₂O₃ particles contacted well. Further research revealed that the calcination temperature is an important factor in the preparation of the composite powder with relatively high photocatalytic ability.     

Optical investigation of charge-transfer transitions in spinel Co3O4

Optical transitions in normal-spinel Co₃O₄ have been identified by investigating the variation of its optical absorption spectrum with the replacement of Co by Zn. Three optical-transition structures were located at about 1.65, 2.4, and 2.8 eV from the measured dielectric function of Co₃O₄ by spectroscopic ellipsometry. The variation of the absorption structures with the Zn substitution (Zn_xCo_3−xO₄) can be explained in terms of charge-transfer transitions involving d states of Co ions. The 1.65 eV structure is assigned to a d-d charge-transfer transition between the t_2g states of octahedral Co³⁺ ion and t₂ states of tetrahedral Co²⁺ ion, t_2g(Co³⁺)→t₂(Co²⁺). The 2.4 and 2.8 eV structures are interpreted as due to charge-transfer transitions involving the p states of O²⁻ ion: p(O²⁻)→t₂(Co²⁺) for the 2.4 eV absorption and p(O²⁻)→e_g(Co³⁺) for the 2.8 eV absorption. The observed gradual reduction of the 1.65 and 2.4 eV absorption strength with the increase of the Zn composition for Zn_xCo_3−xO₄ can be explained in terms of the substitution of the tetrahedral Co²⁺ sites by Zn²⁺ ions. The crystal-field splitting Δ_Oh between the e_g and the t_2g states of the octahedral Co³⁺ ion is estimated to be 2 eV.     

Synthesis and characterization of TiO2/Fe2O3 core-shell nanocomposition film and their photoelectrochemical property

TiO₂/Fe₂O₃ core-shell nanocomposition film has been fabricated via two-step method. TiO₂ nanorod arrays are synthesized by a facile hydrothermal method, and followed by Fe₂O₃ nanoparticles deposited on TiO₂ nanorod arrays through an ordinary chemical bath deposition. The phase structures, morphologies, particle size, chemical compositions of the composites have been characterized by X-ray diffraction (XRD), field emission scanning electron microscope (FESEM) and ultraviolet-visible (UV-vis) spectrophotometer. The results confirm that Fe₂O₃ nanoparticles of mean size ca. 10 nm coated on the surface of TiO2 NRs. After depositing Fe₂O₃, UV-vis absorption property is induces the shift to the visible-light range, the annealing temperature of 600 °C is the best condition for UV-vis absorption property of TiO₂/Fe₂O₃ nanocomposite film, and increasing Fe content, optical activity are enhanced one by one. The photoelectrochemical (PEC) performances of the as-prepared composite nanorods are determined by measuring the photo-generated currents under illumination of UV-vis light. The TiO₂ NRs modified by Fe₂O₃ show the photocurrent value of 1.36 mA/cm² at 0 V vs Ag/AgCl, which is higher than those of unmodified TiO₂ NRs.     

Dielectric properties and magnetoelectric effect of (x)NiFe2O4+(1−x)Ba0.8Sr0.2TiO3 composites

Magnetoelectric composites of NiFe₂O₄ and Ba_0.8Sr_0.2TiO₃ were prepared using conventional double-sintering ceramic method. The phase formation of magnetoelectric composites was confirmed by XRD technique. Variation of dielectric constant and loss tangent at room temperature with frequency in the range 100 Hz-1 MHz has been studied. Also the variation of dielectric constant and loss tangent with temperature and composition at fixed frequencies of 1 kHz, 10 kHz, 100 kHz and 1 MHz is reported. The static value of the magnetoelectric conversion factor was measured as a function of intensity of the magnetic field. The ME voltage coefficient of about 430 μV/cm Oe was observed for 15% NiFe₂O₄+85% Ba_0.8Sr_0.2TiO₃ composite. All the samples show linear variation of magnetoelectric conversion in the presence of static magnetic field.     

Electronic behavior of visible light sensitive ZrO2/Cr2O3/carbon clusters composite materials

Nano-sized ZrO₂/Cr₂O₃/carbon clusters composite materials were successfully obtained by the microwave-irradiated calcinations of a Zr(acac)₄/Cr(acac)₃/epoxy resin complex. The compositions of the resulting composite materials were determined using ICP, elemental analysis and surface characterization by XRD, SEM and TEM. The UV–Vis spectra of the composites were also obtained. ESR spectral examinations of the composites indicate that an electron transfer takes place in the process Cr₂O₃ → carbon clusters → ZrO₂. The composite materials have been found to show visible light-responsive catalytic activities.     

Combustion synthesized MgAl2O4:Cr phosphors—An EPR and optical study

Magnesium aluminate (MgAl₂O₄) doped with trivalent chromium (Cr³⁺) was synthesized by the combustion method. The prepared sample was characterized by X-ray powder diffraction, Brunauer-Emmet-Teller (BET) adsorption isotherms and diffuse-reflectance UV-vis spectroscopy techniques. Electron paramagnetic resonance (EPR) and photoluminescence (PL) studies have been performed at room temperature and at 110 K. The EPR spectrum exhibit resonance signals at g=5.37, 4.53, 3.82, 2.26 and 1.96 characteristic of Cr³⁺ ions. The luminescence of Cr³⁺-activated MgAl₂O₄ exhibits a red emission peak around 686 nm from the synthesized phosphor particles upon 551 nm excitation. The luminescence is assigned to a transition from the upper ²E_g→⁴A_2g ground state of Cr³⁺ ions. By correlating EPR and optical data the crystal field splitting parameter (D_q), Racah inter-electronic repulsion parameter (B) and the bonding parameters have been evaluated and discussed. The bonding parameters suggests that the ionic nature of Cr³⁺ ions with the ligands and the Cr³⁺ ions are in distorted octrahedral environment.     

Electrodeposition and characterization of Ni-Y2O3 composite

Nano-sized Y₂O₃ particles were codeposited with nickel by electrolytic plating from a nickel sulfate bath. The effects of the incorporated Y₂O₃ on the structure, morphology and mechanical properties (including microhardness, friction coefficient and wear resistant) of Ni-Y₂O₃ composite coatings were studied. It is observed that the addition of nano-sized Y₂O₃ particles shows apparent influence on the reduction potential and pH of the electrolyte. The incorporated Y₂O₃ increases from 1.56 wt.% to 4.4 wt.% by increasing the Y₂O₃ concentration in the plating bath from 20 to 80 g/l. XRD results reveal that the incorporated Y₂O₃ particles favour the crystal faces (2 0 0) and (2 2 0). SEM and AFM images demonstrate that the addition of Y₂O₃ particles causes a smooth and compact surface. The present study also shows that the codeposited Y₂O₃ particles in deposits decrease the friction coefficient and simultaneously reduce the wear weight loss. Ni-Y₂O₃ composite coatings reach their best microhardness and tribological properties at Y₂O₃ content 4.4 wt.% under the experiment conditions.     

Green emission from Tb-doped SrSi2O2N2 phosphors under ultraviolet light irradiation

Tb-doped SrSi₂O₂N₂ phosphors with promising luminescent properties were synthesized by the conventional solid-state reaction method, characterized by powder X-ray diffraction and studied by photoluminescence excitation and emission spectra. The synthesized materials exhibited a weak blue emission and a strong green emission in the region of 400-470 nm and 480-650 nm, which are attributed to ⁵D₃→⁷F_j (j=5, 4, 3) and ⁵D₄→⁷F_j (j=6, 5, 4, 3) transitions of Tb³⁺, respectively. The green emission from ⁵D₄→⁷F₅ at 543 nm showed the highest intensity under the optimized concentration of 0.1 mol, after which the quenching concentration became relevant. The quenching behavior of the emission of Tb³⁺ was explained by the cross-relaxation of its excited state.     

Photocatalytic activity of Nb2O5/SrNb2O6 heterojunction on the degradation of methyl orange

The pure SrNb₂O₆ powders were prepared at 1400 °C by a conventional solid-state method and characterized by X-ray powder diffraction and UV-vis diffuse reflection spectrum. The powders of Nb₂O₅ and SrNb₂O₆ were ball-milled together and annealed to form the Nb₂O₅/SrNb₂O₆ composite. Photocatalytic activities of the composites were investigated on the degradation of methyl orange. The results show that the proportion of Nb₂O₅ to SrNb₂O₆ and the annealing temperature greatly influence the photocatalytic activities of the composites. The best photocatalytic activity occurs when the weight proportion of Nb₂O₅ to SrNb₂O₆ is 30% and the annealing temperature is 600 °C. The tremendously enhanced photocatalytic activity of the Nb₂O₅/SrNb₂O₆ composite compared to Nb₂O₅ or SrNb₂O₆ is ascribed to the heterojunction effect taking place at the interface between particles of Nb₂O₅ and SrNb₂O₆. The powders also show a higher photocatalytic activity than commercial anatase TiO₂.     

Synthesis and magnetic properties of Co-Cr2O3 nanocomposites

Co:Cr₂O₃ nanocomposites were prepared with phase separated metallic Co clusters in a wide range of concentrations namely 10, 20, 30, 40 and 50 wt% Co. Samples were annealed at different temperatures to study the effects of crystallization of Cr₂O₃ and the growth of Co metal clusters on the magnetic behavior of nanocomposites. Enhanced crystallinity of antiferromagnetic (Cr₂O₃) matrix and growth of Co clusters with higher annealing temperatures strongly affects the coercivity, saturation and magnetic viscosity in these hybrid materials. Amorphous Cr₂O₃ acts as a paramagnetic matrix for Co particles. Exchange anisotropy stabilizes magnetic moments of Co embedded in Cr₂O₃ only if Cr₂O₃ is crystalline. This exchange anisotropy leads to the enhancement of coercivity. Relaxation measurements confirm that exchange anisotropy is higher for samples with lower Co content.     

Study of the CO2 decomposition over doped Ni-ferrites

The H₂ reduced NiFe_2−xCr_xO₄ can be used to decompose CO₂ to C repeatedly. A series of nanocrystalline Ni-ferrite doping different contents of Cr³⁺ were synthesized by mixed ions co-precipitation method and characterized by XRD, BET and TEM. The results showed that their crystallite sizes were 1-2 nm and BET surface area changed from 220 to 285 m²/g. The evaluation of the activity and stability indicated that Ni-ferrite with 4 wt% Cr³⁺ dopant could be used repeatedly as many as 60 times and was transformed to Fe_yNi_1−y (0<y<1) alloy and Fe₅C₂ gradually during the cycle decomposition of CO₂ to carbon, especially for no Cr³⁺ sample. After the 60th reaction, although NiFe₂O₄ phase just remained 2.1 wt%, the decomposition activity of Ni-ferrite with 4 wt% Cr³⁺ was still 60% of initial activity. This fact suggests that nanocrystalline Fe_yNi_1−y (0<y<1) alloy from the cycle reaction can contribute to the decomposition of CO₂. The results from scanning electron microscopy (SEM), TEM and XRD show that the deposited carbon from CO₂ decomposition consisted of amorphous, crystallite and carbon nanotubes.     

High spin polarization in ordered Cr3Co with the DO3 structure: A first-principles study

The electronic structure of the highly ordered alloy Cr₃Co with the DO₃ structure has been studied by FLAPW calculations. It is found that the ferrimagnetic state is stable and that the equilibrium lattice constant of Cr₃Co equals 5.77 Å. A large peak in majority spin density of states (DOS) and an energy gap in minority spin DOS are observed at the Fermi level, which results in a high spin polarization of 90% in the ordered alloy Cr₃Co. The total magnetic moment of Cr₃Co is 3.12μ_B, which is close to the ideal value of 3μ_B derived from the Slater-Pauling curve. An antiparallel alignment between the moments on the Cr (A, C) sites and the Cr (B) sites is observed. Finally, the effect of lattice distortion on the electronic structure and on magnetic properties of Cr₃Co compound is studied. A spin polarization higher than 80% can be obtained between 5.55 and 5.90 Å. With increasing lattice constant, the magnetic moments on the (A, C) sites increase and the moments on the (B, D) sites decrease. They compensate each other and make the total magnetic moment change only slightly.     

Immiscibility in the NiFe2O4-NiCr2O4 spinel binary

The solid solution behavior of the Ni(Fe_1−nCr_n)₂O₄ spinel binary is investigated in the temperature range 400-1200 °C. Non-ideal solution behavior, as exhibited by non-linear changes in lattice parameter with changes in n, is observed in a series of single-phase solids air-cooled from 1200 °C. Air-annealing for 1 year at 600 °C resulted in partial phase separation in a spinel binary having n=0.5. Spinel crystals grown from NiO, Fe₂O₃ and Cr₂O₃ reactants, mixed to give NiCrFeO₄, by Ostwald ripening in a molten salt solvent, exhibited single-phase stability down to about 750 °C (the estimated consolute solution temperature, T_cs). A solvus exists below T_cs. The solvus becomes increasingly asymmetric at lower temperatures and extrapolates to n values of 0.2 and 0.7 at 300 °C. The extrapolated solvus is shown to be consistent with that predicted using a primitive regular solution model in which free energies of mixing are determined entirely from changes in configurational entropy at room temperature.     

Spectroscopic characteristic and energy levels of Cr in Cr:KAl(MoO4)2 crystal

This paper reports polarized spectral properties and energy levels of Cr³⁺ in KAl(MoO₄)₂ crystal. The absorption and emission cross sections are estimated as 3.72×10^-20 cm² at 669 nm and 2.74×10^-20 cm^-2 at 823 nm for σ-polarization, respectively. The energy levels of Cr³⁺ ion in KAl(MoO₄)₂ crystal were calculated based on the Tanabe-Sugano theory. It is suggested that Cr³⁺ ions occupy at an intermediate crystal field site in Cr³⁺:KAl(MoO₄)₂.     

Visible-light-activated Ce-Si co-doped TiO2 photocatalyst

To enhance the visible photocatalytic activity and thermal stability of TiO₂, Ce-Si co-doped TiO₂ materials were synthesized through a nonaqueous method of which the purpose was to reduce the aggregation between TiO₂ particles. The obtained materials maintained anatase phase and large surface area of 103.3 m² g⁻¹ even after calcined at 800 °C. The XPS results also indicated that Si was weaved into the lattice of TiO₂, and Ce mainly existed as oxides on the surface of TiO₂ particles. The doped Si might enhance surface area and suppress transformation from anatase to rutile, while the doped Ce might cause visible absorption and inhibit crystallite growth during heat treatment. Evaluated by decomposing dye Rhodamine B, visible photocatalytic activity of Ce-Si co-doped TiO₂ was obviously higher than that of pure TiO₂ and reached the maximum at Ce and Si contents of 0.5 mol% and 10 mol%.     

The optical absorption edge of brookite TiO2

The optical absorption edge of brookite TiO₂ was measured at room temperature, using natural crystals. The measurements extend up to 3.54 eV in photon energy and 2000 cm⁻¹ in absorption coefficient. The observed absorption edge is broad and extends throughout the visible, quite different from the steep edges of rutile and anatase. No evidence of a direct gap is seen in the range measured. The spectral dependence of the absorption strongly suggests that the brookite form of TiO₂ is an indirect-gap semiconductor with a bandgap of about 1.9 eV.