Polymeric membrane studied using slow positron beam

A radioisotope slow positron beam has been built at the Chung Yuan Christian University in Taiwan for the research and development in membrane science and technology. Doppler broadening energy spectra and positron annihilation lifetime have been measured as a function of positron energy up to 30 keV in a polyamide membrane prepared by the interfacial polymerization between triethylenetetraamine (TETA) and trimesoyl chloride (TMC) on modified porous polyacrylonitrile (PAN) asymmetric membrane. The multilayer structures and free-volume depth profile for this asymmetric membrane system are obtained. Positron annihilation spectroscopy coupled with a slow beam could provide new information about size selectivity of transporting molecules and guidance for molecular designs in polymeric membranes.     

Adhesion and endothelialization of endothelial cells on the surface of endovascular stents by the novel rotational culture of cells

Recent researches indicate that the initial event in the implantation of endovascular stents involves mechanical injury to the vessel wall. Confluent endothelialization of vascular grafts in vitro before implantation has been suggested as a way to reduce injury of the blood vessel. The purpose of this study is to establish a useful way to improve the adhesion of endothelial cells and accelerate endothelialization on the surface of endovascular stents by a novel rotational culture device. Numerical simulation was used to predict the shear stress on the surface of stents. The number of cellular adhesion was calculated by cell counting, the cell growth was observed by scanning electron microscope and fluorescence microscope. Numerical simulation results showed that the stents was exposed to shear stress of 2.66 × 10⁻³ to 8.88 × 10⁻² Pa. Rotational culture of human umbilical vein endothelial cells could enhance the adhesion of cells and accelerate endothelialization on the surface of stents when the culture conditions for EC adhesion were intermediate rotation speed, higher dynamic incubation times, lower cell densities.     

Magnetic and magnetization properties of electrodeposited fcc CoPt nanowire arrays

Magnetic and magnetization properties of fcc Co_1−xPt_x (x?0.3) alloy nanowires fabricated by electrodeposition into self-synthesized anodic alumina templates are investigated. Magnetization curves, measured for varying wire geometries, show a crossover of easy axis of magnetization from parallel to perpendicular to the nanowire axis as a function of the diameter and length. The measured values of coercivity (H_c) and remanent squareness (SQ) of CoPt nanowire arrays, as a function of angle (θ) between the field and wire axis, support the crossover of easy axis of magnetization. The curling mode of the magnetization reversal process is observed for CoPt nanowire arrays. At low temperatures, the easy axis for magnetization of the nanowires is observed to deviate from the room-temperature orientation.     

Femtosecond laser structuring of titanium implants

In this study we perform the first femtosecond laser surface treatment of titanium in order to determine the potential of this technology for surface structuring of titanium implants. We find that the femtosecond laser produces a large variety of nanostructures (nanopores, nanoprotrusions) with a size down to 20 nm, multiple parallel grooved surface patterns with a period on the sub-micron level, microroughness in the range of 1-15 μm with various configurations, smooth surface with smooth micro-inhomogeneities, and smooth surface with sphere-like nanostructures down to 10 nm. Also, we have determined the optimal conditions for producing these surface structural modifications. Femtosecond laser treatment can produce a richer variety of surface structures on titanium for implants and other biomedical applications than long-pulse laser treatments.     

Effect of graded interlayer on the mode I edge delamination by residual stresses in multilayer coating-based systems

The mode I edge delamination could be initiated due to the presence of the interfacial peeling stresses near the edges of the multilayered systems due to the material mismatches between the adjacent layers. However, the exact peeling stress distributions could not be obtained by using the existing analytical and numerical models. It was proposed recently that the peeling moment resulting from the localized peeling stresses could be used to characterize mode I edge delamination. In this paper, the effect of the graded interlayer on the mode I edge delamination by thermal residual stresses in multilayer coating-based systems was investigated. Following the previous analysis approaches, the exact closed-form solutions for the peeling moments at individual interfaces and the curvatures for bilayer system, typical thermal barrier coating (TBC) system and TBC-based system with a graded interlayer inserted between the metallic layer and the ceramic layer were, respectively, derived. Case studies showed that the edge delamination by thermal stress could be impeded by properly selecting the coating materials and individual layer thicknesses. These studies may provide some important insights for developing fail-safe designing methodologies for multilayered systems.     

Back to the future: Polarised positron beams

Plans for the development of a polarised mono-energetic positron beam at the University of Bath are described. Pilot measurements with the existing beam, modified only by increasing the source-moderator separation, have demonstrated that the helicity of the present beam is sufficient to show sensitivity to ferromagnetism in bulk iron. However, an increase in flux and helicity is required if the beam is to be successfully used to probe magnetic structures of current technological interest, and strategies to achieve both are described. Potential applications in magnetic semiconductor structures and magnetic nanoparticles are discussed.     

Microstructural and surface characterization of thin gold films on n-Ge (1 1 1)

Thin gold films were fabricated by vacuum resistive deposition on the n-Ge (1 1 1) wafers. The films were annealed between 300 and 600 °C. These resulting thin films were then characterised using scanning electron microscopy (field emission and back-scattering modes), Rutherford back scattering spectroscopy and time of flight secondary ion mass spectroscopy (TOF-SIMS). For temperatures below the eutectic temperature the distribution of both the gold and the germanium on the surface are uniform. Above the eutectic temperature, the formation of gold rich islands on the surface of the Germanium were observed. These changes in the microstructure were found to correspond to changes in the electrical characteristics of the diodes.     

Studies of the relaxed amorphous phase in the Fe80Nb6B14 alloy

The paper presents measurements of magnetic permeability, magnetic after-effects, magnetostriction, DSC and XPS for the Fe₈₀Nb₆B₁₄ amorphous alloys preliminary annealed for 1 h at temperatures ranging from 300 to 770 K. It was shown that annealing out of free volume and internal stresses causes a decrease of magnetostriction coefficient and leads to the formation of the energetically stable relaxed amorphous state. The XPS spectra show local fluctuation of boron density. This effect was attributed to the formation of small iron clusters—the characteristic feature for the relaxed amorphous phase.     

Influence of alloying additions and annealing time on magnetic properties in amorphous alloys based on iron

The present paper focuses on the influence of alloying additions on magnetostriction coefficient, concentration of free volume and magnetization in Fe–X–Si–B, and Fe–X–Cu–Si–B amorphous alloys. It was shown that in one group of alloys, the enhancement of soft magnetic properties effect can be attributed to formation of nanocrystalline phase αFe(Si), a decrease of the magnetostriction coefficient and annealing out of free volume. In the second group of alloys, this effect is due to a decrease of the magnetostriction coefficient and annealing out of free volume i.e. takes place in the relaxed amorphous phase.     

Effects of micropatterned surfaces coated with type I collagen on the proliferation and morphology of tenocytes

The effects of micropatterned surfaces coated with type I collagen (CNI) on the proliferation and morphology of rat tail tenocytes were investigated in this study. The micropatterned polydimethylsiloxane substrates were prepared by using the technique of microcontact printing and then coated with different concentrations of CNI by the microfluidic channels technology. After being seeded on the CNI-coated micropatterned substrates, the tenocytes were tested by MTT colorimetric assay at 1-, 3-, 5-, and 7-day time intervals to evaluate the proliferation of tenocytes on the substrates. The alignment and morphology of tenocytes on the CNI-coated substrates after incubation for 1 or 24 h were observed with SEM. The results showed tenocytes proliferated well with increase of CNI concentrations and identically aligned along the grooves of the CNI-coated micropatterned substrates. This could have a potential advantage in construction of engineered tendons in vitro.     

Structural relaxation,crystallization and improvement of magnetic properties in FeXSiB (X=Cr,Nb)-type amorphous alloys

In the present paper, the influence of Nb and Cr on intensity of structural relaxation, crystallization processes, electric and magnetic properties in the Fe₇₆Nb₂Si₁₃B₉, Fe₇₆Cr₂Si₁₃B₉ and Fe₇₆Nb₁Cr₁Si₁₃B₉ alloys were investigated. It was shown that the improvement of magnetic permeability caused by a suitable annealing is a thermally activated process. Activation energy of this process is found to be of the order of 1 eV. Cr as an alloying addition to the Fe–Si–B alloy does not change the 1 h optimization annealing temperature and causes an increase of its efficiency. Nb as an alloying addition causes an increase of the 1 h optimization annealing temperature, and also the temperature of the first step of crystallization.     

Application of core-shell PEGylated CdS/Cd(OH)2 quantum dots as biolabels of Trypanosoma cruzi parasites

Semiconductor quantum dots are a promising class of materials in the labeling of biological systems. In the present study we show the marking pattern of Trypanosoma cruzi (T. cruzi) live parasites using PEGylated CdS/Cd(OH)₂ fluorescent nanocrystals. The analysis obtained by confocal fluorescence microscopy and transmission electron microscopy indicates that only the endocytic paths of parasites were labeled. The parasites were alive after the incubation with the CdS/Cd(OH)₂-PEG suspension. Labeling the T. cruzi with quantum dots can help to better understand the endocytosis process and also the cellular differentiation.     

Long-term stability of soft magnetic properties of amorphous and nanocrystalline alloys based on iron

In the present paper long-term stability of magnetic properties of different amorphous and nanocrystalline alloys was studied. Magnetic properties were measured for annealed samples (300<Ta<900 K) directly after annealing and after long-term aging at room temperature. It was shown that for the Fe_75.3Cu₁Zr_1.7Si₁₃B₉ alloy magnetic permeability of the optimized samples is stable during 8 years aging. For Fe_86−xNb_xB₁₄ alloys the observed long-term instability (3 years aging) is due to annealing out of free volume leading to formations of small iron clusters coherent with the amorphous surroundings.     

Assignment of quantum number for plasmon energies in carbon layer systems

Electron-emission distribution curves of carbon layer surfaces excited by primary electrons of energies in the 118-534 eV range have been measured. The first four peaks in the plasmon spectrum are observed. It is concluded that the oscillator energies are presented to explain the assignment of the quantum number (n = 0,1,2,3) for internal plasmons in carbon layer systems. The preliminary assignment is in good agreement with the experimental results. It is also shown that the existence of limit between internal and surface plasmons. It is pointed out that the plasmon energy does not depend on both the external electrostatic voltage and the sample temperature. Moreover, the quantum number was adopted to the names of internal plasmons in the observed spectra.     

Advances in amorphous and nanocrystalline magnetic materials

Recent advances made in the area of amorphous and nanocrystalline alloys exhibiting high saturation inductions are reviewed. A new chemical composition was identified that achieves a saturation induction of 1.64 T in an iron-based amorphous alloy. This alloy, when used in electrical transformers, shows a much improved performance over the existing amorphous alloy. Nanocrystalline FeCoCuNbSiB alloys are found to have saturation induction levels reaching 1.7 T. These materials are suited for use in sensors and inductors carrying large currents. Some of these nanocrystalline alloys show a BH squareness ratio exceeding 90%, which can be utilized in pulse power devices. Recent developments in the applications of these materials are also pointed out.     

Silicon nanowire and polyethylene superhydrophobic surfaces for discrete magnetic microfluidics

A microfluidic method to manipulate small drops of water is studied on two different superhydrophobic surfaces. Using this digital magnetofluidic method, water drops containing paramagnetic carbonyl-iron microparticles were displaced on silicon nanowire (Si NW) and low-density polyethylene (LDPE) superhydrophobic surfaces using magnetic fields. Horizontal, vertical, or upside-down drop movement is made possible by the action of capillary forces induced by paramagnetic particles aligning and following a magnetic field, indicating that three-dimensional digital microfluidics is possible. Also, both Si NW and LDPE superhydrophobic surfaces combine surface chemistry with nano and microscale surface roughness to make drop movement possible. Si NW superhydrophobic surfaces were prepared using vapor-liquid-solid growth systems followed by coating with a perfluorinated hydrocarbon. LDPE superhydrophobic surfaces were prepared by growing polyethylene crystals on a polyethylene substrate through careful rate control.     

Studies of adsorption equilibria and kinetics in the systems: Aqueous solution of dyes-mesoporous carbons

Two carbonaceous materials were synthesized by using the method of impregnation of mesoporous silicas obtained by applying the Pluronic copolymers as pore-creating agents. The isotherms of adsorption of methylene blue and methyl orange from aqueous solutions were measured by the static method. The profiles of adsorbate concentration change in time were obtained from the UV-vis spectra. The adsorption isotherms and kinetic dependence were discussed in the terms of theory of adsorption on heterogeneous surfaces.     

Optimum designs for multi-layered film structures based on the knowledge on residual stresses

Residual stresses are inevitably generated within the multi-layered film structures due to the mismatches of material properties between the adjacent layers. Using the force and moment equilibrium conditions and beam bending theory, the residual stresses in each layer can be predicted and expressed as σ_i(z) = E_i[?′ + K(z + δ)], where E_i is the elastic modulus of the layer, ?′ the strain due to the in-plane force resulting from the misfit strain, K(z + δ) characterizes the bending contribution. For a bilayer system, the expression of the residual stress in the film is relatively simple. If the each layer thickness is much less than the substrate thickness, Stoney's equation will be derived. The assumption of a constant elastic modulus throughout the system is only applicable when the film and the substrate thickness ratio is less than 0.1. Specific analyses are performed for the thermal stresses in ZrO₂/NiCoCrAlY thermal barrier coatings (TBCs) to illustrate the implementation of the analytical model. Moreover, the effects of single interlayer and graded interlayer inserted between the metallic layer and the ceramic layer on the residual stress distributions in TBCs are investigated. Additionally, the zero-deflection design is also discussed for typically duplex-layer TBC system.     

Scintillation and anomalous emission in elpasolite Cs2LiLuCl6:Ce

The luminescence and scintillation properties of Cs₂LiLuCl₆:0.5%Ce³⁺ are presented. Special attention is devoted to a 9.4 ns fast emission at 275 nm that can only be excited via the highest cubic field 5d_e state of Ce. Contrary to Cs₃LuCl₆ and Cs₂LiYCl₆, where the same type of fast emission was observed, the emission in Cs₂LiLuCl₆ is still observed at room temperature. Assuming that the 5d_e state is located inside the host conduction band (CB), we propose that the emission originates from a mixed state at or just below the bottom of the CB and ends at the 4f ground state of Ce³⁺. To proof this model we studied the thermal quenching of the anomalous luminescence and performed X-ray photoelectron spectroscopy. A model for a temperature-activated energy transfer from the anomalous state to the lowest 5d_t excited state of Ce³⁺ explains most of the results. Besides the 275 nm emission, the material shows 5d_t-4f Ce³⁺ emission at 370 and 406 nm and 2 ns fast core-valence luminescence when excited with 16-22 eV photons. The scintillation properties of Cs₂LiLuCl₆:Ce are briefly discussed.     

Temperature dependence of magnetic properties of NiFe2O4 nanoparticles embeded in SiO2 matrix

Spinel ferrite NiFe₂O₄ nanoparticles (?25 nm) in SiO₂ matrix were prepared by sol–gel method. The phase and average crystallite size of the samples were determined by X-ray diffraction method and the particle size distributions were studied by a transmission electron microscope. Magnetic properties of the samples were investigated with different ferrite particle sizes and at various temperatures down to 10 K. Superparamagnetic properties were observed at room temperature when the particle size is less than 10 nm.In superparamagnetic state, the field dependence of magnetization follows Langevin function which was originally developed for paramagnetism. The effective anisotropy constant K_eff is found to increase significantly with the decrease in particle volume and an order of magnitude higher than that of the bulk samples when the particle size is below 5 nm due to the dominance of surface anisotropy. In case of nanosized systems, the effect of size reduction on the law of approach to saturation has also been studied in detail.