The study of novel Fe3O4@γ-Fe2O3 core/shell nanomaterials with improved properties

The surface structure of the iron oxide nanoparticles obtained by the co-precipitation method has been investigated, and a thin layer of α-FeOOH absorbed on surface of the nanoparticle is confirmed by analyses of Fourier transform infrared (FTIR), X-ray photoelectron spectra (XPS) and surface photovoltage spectroscopy (SPS). After annealed at 400 °C, the α-FeOOH can be converted to γ-Fe₂O₃. The simple-annealed procedure resulted in the formation of Fe₃O₄@γ-Fe₂O₃ core/shell structure with improved stability and a higher magnetic saturation value, and also the simple method can be used to obtain core/shell structure in other similar system.     

Synthesis of magnetic hollow silica using polystyrene bead as a template

In this paper, we report a new route to synthesize novel magnetic hollow silica nanospheres (MHSNs) using polystyrene particles as sacrificial templates, and TEOS and Fe₃O₄ as precursors. TEM, EDS, XRD, and SQUID were applied to characterize MHSNs. TEM and EDS results show that the MHSNs consist of about 200 nm of hollow cores and ∼35 nm shells with ∼10 nm of Fe₃O₄ nanoparticles embedded. The polystyrene beads were successfully removed by immersing the as-prepared silica nanocomposite in a toluene solution. XRD results demonstrate that the Fe₃O₄ magnetic nanoparticles still keep spinel structure even heated at low temperature. The surface status of the polystyrene beads and Fe₃O₄ nanoparticles has an important effect on the formation of the MHSNs. The MHSNs present a superparamagnetism at room temperature by SQUID measurement. The MHSNs have potential applications in biosystem and nanomedicine.     

Controlled synthesis and phase characterization of Fe-based nanoparticles obtained by thermal decomposition

Iron oxide nanoparticles were synthesized by the thermal decomposition of Fe(acac)₃ and Fe(CO)₅. Three different homogeneous procedures were used for the controlled synthesis of Fe₃O₄, γ-Fe₂O₃ and Fe₃O₄/γ-Fe₂O₃ mixture nanocrystals. A combination of characterization techniques was used in order to distinguish these oxides. The controllable size, the narrow distribution and the rhombic self-assembly of the nanoparticles were revealed by the high-resolution transmission electron microscopy images and the X-ray powder diffraction results. For the quantitative analysis of the samples manganometry was used. Preliminary magnetic measurements indicated the size and composition dependence of saturation magnetization, a superparamagnetic behavior of the samples and some ferromagnetic features.     

Challenge of ultra high frequency limit of permeability for magnetic nanoparticle assembly with organic polymer—Application of superparamagnetism

Permeability and its upper limitation frequency of superparamagnetic nanoparticle type magneto-dielectric hybrid material were theoretically and experimentally investigated. The Landau-Lifschitz-Gilbert equation without any interaction between nanoparticles revealed that the blocking resonance frequency was able to exceed the ferromagnetic resonance frequency originating from the intrinsic magnetocrystalline anisotropy field by decreasing particle size, resulting in ultra fast switching of superparamagnetic moment in GHz range. In the case of Fe nanoparticles, the blocking resonance frequency can be increased to 130 GHz by reducing particle size to 1 nm. The experiment results for Fe₃O₄ and Fe nanoparticle assemblies supported the validity of our calculation results. Thus, superparamagnetic nanoparticle assembly could be promising material for high frequency use over 10 GHz range.     

Magnetic properties of Co-ferrite-doped hydroxyapatite nanoparticles having a core/shell structure

The magnetic properties of Co-ferrite-doped hydroxyapatite (HAP) nanoparticles of composition Ca_10−3xFe_2xCo_x(PO₄)₆(OH)₂ (where x=0, 0.1, 0.2, 0.3, 0.4 and 0.5% mole) are studied. Transmission electron microscope micrograms show that the 90 nm size nanoparticles annealed at 1250 °C have a core/shell structure. Their electron diffraction patterns show that the shell is composed of the hydroxyapatite and the core is composed of the Co-ferrite, CoFe₂O₄. Electron spin resonance measurements indicate that the Co²⁺ ions are being substituted into the Ca(1) sites in HAP lattice. X-ray diffraction studies show the formation of impurity phases as higher amounts of the Fe³⁺/Co²⁺ ions which are substituted into the HAP host matrix. The presence of two sextets (one for the A-site Fe³⁺ and the other for the B-site Fe³⁺) in the Mössbauer spectrum for all the doped samples clearly indicates that the CoFe₂O₄.cores are in the ferromagnetic state. Evidence of the impurity phases is seen in the appearance of doublet patterns in the Mössbauer spectrums for the heavier-doped (x=0.4 and 0.5) specimens. The decrease in the saturation magnetizations and other magnetic properties of the nanoparticles at the higher doping levels is consistent with some of the Fe³⁺ and Co²⁺ which being used to form the CoO and Fe₂O₃ impurity phase seen in the XRD patterns.     

Mössbauer investigations of Fe and Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> magnetic nanoparticles for hyperthermia applications

Magnetic nanoparticles of magnetite Fe₃O₄ and Fe synthesized by physical vapor deposition with a fast highly effective method using a solar energy have been studied. Targets have been prepared from tablets pressed from Fe₃O₄ or Fe powders. Relationships between the structure of nanoparticles and their magnetic properties have been investigated in order to understand principles of the control of the parameters of magnetic nanoparticles. Mössbauer investigations have revealed that the nanoparticles synthesized from tablets of both pure iron and Fe₃O₄ consist of two phases: pure iron and iron oxides (γ-Fe₂O₃ and Fe₃O₄). The high iron oxidability suggests that the synthesized nanoparticles have a core/shell structure, where the core is pure iron and the shell is an oxidized iron layer. Magnetite nanoparticles synthesized at a pressure of 80 Torr have the best parameters for hyperthermia due to their core/shell structure and core-to-shell volume ratio.     

Application of factor analysis to XPS valence band of superparamagnetic iron oxide nanoparticles

X-Ray photoelectron spectra of nano-sized superparamagnetic iron oxide nanoparticles were examined with the aim to discriminate the different degree of iron oxidation. Careful analysis of the valence band regions reveals the presence of both Fe₃O₄ and Fe₂O₃. The application of factor analysis enabled us to extract the relative molar concentrations of these oxides in the nanoparticles. This is of particular interest in improving the magnetic properties of iron oxide nanoparticles whose superparamagnetic character can be optimized to obtain better contrast in images from nuclear magnetic resonance. As a result, the factor analysis allows tuning the nanoparticle synthesis conditions in order to obtain the optimal magnetic properties for imaging. Results obtained by the XPS valence band analysis were compared to the transmission electron microscopy, X-ray diffraction and Raman measurements.     

Magnetic properties of the novel nanocomposite (Zn0.15Ni0.85Fe2O4)0.15/(SiO2)0.85 at room temperature

The value of the effective magnetic anisotropy constant of the ferrimagnetic nanoparticles Zn_0.15Ni_0.85Fe₂O₄ embedded in a SiO₂ silica matrix, determined through ferromagnetic resonance (FMR), is much higher than the magnetocrystalline anisotropy constant. The higher value of the anisotropy constant is due to the existence of surface anisotropy. However, even if the magnetic anisotropy is high, the ferrimagnetic nanoparticles with a 15% concentration, which are isolated in a SiO₂ matrix, display a superparamagnetic (SPM) behavior at room temperature and at a frequency of the magnetization field equal to 50 Hz. The FMR spectrum of the novel nanocomposite (Zn_0.15Ni_0.85Fe₂O₄)_0.15/(SiO₂)_0.85, recorded at room temperature and a frequency of 9.060 GHz, is observed at a resonance field (B_0r) of 0.2285 T, which is substantially lower than the field corresponding to free electron resonance (ESR) (0.3236 T). Apart from the line corresponding to the resonance of the nanoparticle system, the spectrum also contains an additional weaker line, identified for a resonance field of ∼0.12 T, which is appreciably lower than B_0r. This line was attributed to magnetic ions complex that is in a disordered structure in the layer that has an average thickness of 1.4 nm, this layer being situated on the surface of the Zn_0.15Ni_0.85Fe₂O₄ nanoparticles that have a mean magnetic diameter of 8.9 nm.     

Synthesis of Fe3O4 nanoparticles without inert gas protection used as precursors of magnetic fluids

Fe₃O₄ nanoparticles were hydrothermally synthesized under continuous microwave irradiation from FeCl₃·6H₂O and FeSO₄·7H₂O aqueous solutions, using NH₄OH as precipitating reagent and N₂H₄·H₂O as oxidation-resistant reagent. The results of X-ray powder diffraction (XRD), FT–IR spectroscopy and scanning electron microscopy (SEM) measurements showed that the synthesized magnetite (Fe₃O₄) nanoparticles had an average diameter of 10 nm. The magnetic properties of the Fe₃O₄ nanoparticles were measured using a vibrating sample magnetometer (VSM), indicating that the nanoparticles possessed high saturation magnetization at room temperature. The Fe₃O₄ nanoparticles were used to prepare magnetic fluids (MFs) based on water, and the properties of the MFs were characterized by a Gouy magnetic balance, a capillary rheometer and a rotating rheometer, respectively.     

Preparation and characterization of silica-coated Fe3O4 nanoparticles used as precursor of ferrofluids

Fe₃O₄ magnetic nanoparticles (MNPs) were synthesized by the co-precipitation of Fe³⁺ and Fe²⁺ with ammonium hydroxide. The sodium citrate-modified Fe₃O₄ MNPs were prepared under Ar protection and were characterized by Fourier transform infrared spectroscopy (FT-IR), transmission electron microscopy (TEM), X-ray powder diffraction (XRD) and vibrating sample magnetometer (VSM). To improve the oxidation resistance of Fe₃O₄ MNPs, a silica layer was coated onto the modified and unmodified MNPs by the hydrolysis of tetraethoxysilane (TEOS) at 50 °C and pH 9. Afterwards, the silica-coated Fe₃O₄ core/shell MNPs were modified by oleic acid (OA) and were tested by IR and VSM. IR results revealed that the OA was successfully grafted onto the silica shell. The Fe₃O₄/SiO₂ core/shell MNPs modified by OA were used to prepare water-based ferrofluids (FFs) using PEG as the second layer of surfactants. The properties of FFs were characterized using a UV-vis spectrophotometer, a Gouy magnetic balance, a laser particle size analyzer and a Brookfield LVDV-III+ rheometer.     

Nanostructured transition metal oxides for aqueous hybrid electrochemical supercapacitors

In this paper, we wish to present an overview of the research carried out in our laboratories with low-cost transition metal oxides (manganese dioxide, iron oxide and vanadium oxide) as active electrode materials for aqueous electrochemical supercapacitors. More specifically, the paper focuses on the approaches that have been used to increase the capacitance of the metal oxides and the cell voltage of the supercapacitor. It is shown that the cell voltage of an electrochemical supercapacitor can be increased significantly with the use of hybrid systems. The most relevant associations are Fe₃O₄ or activated carbon as the negative electrode and MnO₂ as the positive. The cell voltage of the Fe₃O₄/MnO₂ device is 1.8 V and this value was increased to 2.2 V by using activated carbon instead of Fe₃O₄. These two systems have shown superior behavior compared to a symmetric MnO₂/MnO₂ device which only works within a 1 V potential window in aqueous K₂SO₄. Furthermore, the activated carbon/MnO₂ hybrid device exhibits a real power density of 605 W/kg (maximum power density =19.0 kW/kg) with an energy density of 17.3 Wh/kg. These values compete well with those of standard electrochemical double layer capacitors working in organic electrolytes. PACS 82.47.Uv; 82.45.Fk; 82.45.Yz     

Wet-chemical passivation of atomically flat and structured silicon substrates for solar cell application

Special sequences of wet-chemical oxidation and etching steps were optimised with respect to the etching behaviour of differently oriented silicon to prepare very smooth silicon interfaces with excellent electronic properties on mono- and poly-crystalline substrates. Surface photovoltage (SPV) and photoluminescence (PL) measurements, atomic force microscopy (AFM) and scanning electron microscopy (SEM) investigations were utilised to develop wet-chemical smoothing procedures for atomically flat and structured surfaces, respectively. Hydrogen-termination as well as passivation by wet-chemical oxides were used to inhibit surface contamination and native oxidation during the technological processing. Compared to conventional pre-treatments, significantly lower micro-roughness and densities of surface states were achieved on mono-crystalline Si(100), on evenly distributed atomic steps, such as on vicinal Si(111), on silicon wafers with randomly distributed upside pyramids, and on poly-crystalline EFG (Edge-defined Film-fed-Growth) silicon substrates.The recombination loss at a-Si:H/c-Si interfaces prepared on c-Si substrates with randomly distributed upside pyramids was markedly reduced by an optimised wet-chemical smoothing procedure, as determined by PL measurements. For amorphous-crystalline hetero-junction solar cells (ZnO/a-Si:H(n)/c-Si(p)/Al) with textured c-Si substrates the smoothening procedure results in a significant increase of short circuit current I_sc, fill factor and efficiency η. The scatter in the cell parameters for measurements on different cells is much narrower, as compared to conventional pre-treatments, indicating more well-defined and reproducible surface conditions prior to a-Si:H emitter deposition and/or a higher stability of the c-Si surface against variations in the a-Si:H deposition conditions.     

A thin-film transistor with a very thin a-Si:H layer and its application for an LC panel

One of the disadvantages of applying an a-Si:H thin-film transistor (TFT) to an active matrix-addressed liquid crystal (LC) panel is that a TFT with an a-Si:H has a very large photo-leakage current because of the high photo-conductivity of an a-Si:H itself.We have tried decreasing the photo-leakage current by varying the thickness of an a-Si:H layer (L) in TFTs and investigated the characteristics of TFTs, mainly drain voltage versus drain current containing photo-leakage current (I _ph).As a result, it is shown that lnI _ph is proportional to InL, and its gradient is 1.5–2.0. We assume that the thinner an a-Si:H layer is, the more effective the recombination of carriers at the interface states is forI _ph.We have applied TFT with a very thin a-Si:H layer (30nm) to a full-color active matrix-addressed LC panel for a moving picture display and realized a display of good quality under illuminated condition of 5×10⁴lx without a shading layer in it.     

Magnetic properties of core-shell catalyst nanoparticles for carbon nanotube growth

Two types of core-shell nanoparticles have been prepared by laser pyrolysis using Fe(CO)₅ and C₂H₂ or [(CH₃)₃Si]₂O as precursors and C₂H₄ as sensitizer. The first type (about 4 nm diameter) - produced by the decomposition of Fe(CO)₅ in the presence of C₂H₄ and C₂H₂ - consists of Fe cores protected by graphenic layers. The second type (mean particle size of about 14 nm) consists also of Fe cores, yet covered by few nm thick γ-Fe₂O₃/porous polycarbosiloxane shells resulted from the [(CH₃)₃Si]₂O decomposition and superficial oxidation after air exposure. The hysteresis loops suggest a room temperature superparamagnetic behavior of the Fe-C nanopowder and a weak ferromagnetic one for larger particles in the Fe-Fe₂O₃-polymer sample. Both types of nanoparticles were finally used as a catalyst for the carbon nanotube growth by seeding Si(100) substrates via drop-casting method. CNTs were grown by Hot-Filament Direct.Current PE CVD technique from C₂H₂ and H₂ at 980 K. It is suggested that the increased density and orientation degree observed for the multiwall nanotubes grown from Fe-Fe₂O₃-polymer nanoparticles could be due to their magnetic behavior and surface composition.     

Yolk–Shell‐Structured Cu/Fe@γ‐Fe2O3 Nanoparticles Loaded Graphitic Porous Carbon for the Oxygen Reduction Reaction

Core–shell Cu/γ‐Fe₂O₃@C and yolk–shell‐structured Cu/Fe@γ‐Fe₂O₃@C particles are prepared by a facile synthesis method using copper oxide as template particles, resorcinol‐formaldehyde as the carbon precursor, and iron nitrate solution as the iron source via pyrolysis. With increasing carbonization temperature and time, solid γ‐Fe₂O₃ cores are formed and then transformed into Fe@γ‐Fe₂O₃ yolk–shell‐structured particles via Ostwald ripening under nitrogen gas flow. The composition variations are studied, and the formation mechanism is proposed for the generation of the hollow and yolk–shell‐structured metal and metal oxides. Moreover, highly graphitic carbons can be obtained by etching the metal and metal oxide nanoparticles through an acid treatment. The electrocatalytic activity for oxygen reduction reaction is investigated on Cu/γ‐Fe₂O₃@C, Cu/Fe@γ‐Fe₂O₃@C, and graphitic carbons, indicating comparable or even superior performance to other Fe‐based nanocatalysts.     

Magnetoresistance and magnetic properties of Fe3O4 nanoparticle compacts

In this paper,we report on the magnetic properties of Fe3O4 nanoparticles with different grain sizes under different pressures.In all the samples,the saturated magnetization Ms shows a linear decrease with increasing pressure.The thickness of the magnetic dead layer on the nanoparticle surface nuder different pressures was roughly estimated,which also increases with increasing pressure.The transport measurements of the nanoparticle Fe3O4 compacts show that the low-field magnetoresistance (MR) value is insensitive to the grain size in a wide temperature range;however,the high-field MR value is dependent on grain size,especially at low temperatures.These experimental results can be attributed to the different surface states of the nanoparticles.     

Synthesis of carbon nanotubes and iron oxide nanoparticles in MW plasma torch with Fe(CO)5 in gas feed

The MW plasma torch (2.45 GHz) in the mixture of CH₄/H₂/Ar (42/430/1540 sccm) with added Fe(CO)₅vapors was used for the synthesis of iron oxide nanoparticles and carbon nanotubes. The particles with well-defined facets consisting of Fe₃O₄ and -Fe₂O₃ and self-assembled into long chains were produced at the power of 360 W. At higher power of 440-460 W the deposit contained significant amount of multi-walled carbon nanotubes covered by iron oxide nanoparticles. The diameter of CNTs was 8-20 nm. The particles had Fe₃O₄ and/or -Fe₂O₃ cores of spherical shape covered by a thin layer of carbon.     

Laser synthesis of semiconductor nanostructures with narrow band gap

Semiconductor nanostructures with narrow band gap were synthesized by means of laser chemical vapor deposition (LCVD) of elements from iron carbonyl vapors [Fe(CO)₅] under the action of Ar⁺ laser radiation (λ_L = 488 nm) on the Si substrate surface. The temperature dependence of the specific conductivity of these nanostructures in the form of thin films demonstrated typical semiconductor tendency and gave the possibility to calculate the band gap for intrinsic conductivity (E_g) and the band gap assigned for impurities (E_i), which were depended upon film thickness and applied electrical field. Analysis of deposited films with scanning electron microscopy (SEM) and atomic force microscopy (AFM) demonstrated their cluster structure with average size not more than 100 nm. Semiconductor properties of deposited nanostructures were stipulated with iron oxides in different oxidized phases according to X-ray photoelectron spectroscopy (XPS) analysis.These deposited nanostructures were irradiated with Q-switched YAG laser (λ_L = 1064 nm) at power density about 6 × 10⁷ W/cm². This irradiation resulted in the crystallization process of deposited films on the Si substrate surface. The crystallization process resulted in the synthesis of iron carbide-silicide (FeSi_2−xC_x) layer with semiconductor properties too. The width of the band gap E_g of the synthesized layer of iron carbide-silicide was less than for deposited films based on iron oxides Fe₂O_3−x (0 ≤ x ≤ 1).     

Electrical transport, magnetic properties of the half-metallic Fe3O4-based Schottky diode

Fe₃O₄ thin films were prepared successfully by using the rf-sputtering technique with Fe₂O₃ target. The inverse spinel structure of the film was determined by X-ray diffraction (XRD) and the single phase of the Fe₃O₄ was confirmed by the XPS measurements. The surface roughness increases with the increase of the partial pressure of hydrogen. A high saturated magnetic field, 5000 Oe, implies that there exist the antiphase boundaries (APBs) in the film. The higher coercive filed below T_V is ascribed to the lower symmetry of the monoclinic structure. The temperature dependence of resistance shows a very clear Verwey transition and it is implied that the electrical transport behavior follows the variable-range hopping (VRH) mechanism from 40 to 300 K. The current vs. voltage curves of Fe₃O₄/Si Schottky heterojunction exhibits good rectifying property. The ideality factor and Schottky barrier height were obtained from the fitting curves calculated by the standard thermionic emission/diffusion model.     

Noise in boron doped amorphous/microcrystallization silicon films

Hydrogenated silicon (Si:H) film was grown by radio frequency plasma enhanced chemical vapor deposition (PECVD) method. The transition between hydrogenated amorphous silicon (a-Si:H) and hydrogenated microcrystalline silicon (μc-Si:H) was characterized by X-ray diffraction analysis. A semiconductor system was used to measure low frequency noise (1/f noise) and random telegraph switching noise of Si:H films. The results show that the 1/f noise of μc-Si:H is 4 orders of magnitude lower than that of a-Si:H and no RTS noise was found in both films. It also shows that using μc-Si:H instead of a-Si:H film as a sensing layer will enable the development of high performance uncooled microbolometer.