Different recognitions of (E)- and (Z)-1,1′-binaphthyl ketoximes using lipase-catalyzed reactions

Lipase-catalyzed hydrolysis of (E)-2-[α-(acetoxyimino)benzyl]-1,1′-binaphthyl [(±)-1a] and (Z)-2-[α-(acetoxyimino)benzyl]-1,1′-binaphthyl [(±)-1b] yielded optically active (E)-2-[α-(hydroxyimino)benzyl]-1,1′-binaphthyl [(S)-2a] and (Z)-2-[α-(hydroxyimino)benzyl]-1,1′-binaphthyl [(R)-2b], respectively, with high enantiomeric excess. Selectivity for the opposite enantiomer of the axial binaphthyl skeleton was shown by (Z)-isomer 1b against (E)-isomer 1a.     

Effect of the alkyl chain length of 1,1′-binaphthyl esters in lipase-catalyzed amidation

Lipase-catalyzed amidation of 2-[2-(ethoxycarbonyl)ethyl]-1,1′-binaphthyl [(±)-3] yielded optically active (S)-3 and 2-[2-(2-cyanoethylaminocarbonyl)ethyl]-1,1′-binaphthyl [(R)-6a] with high enantiomeric excess. For these lipase-catalyzed amidations, the optimal alkyl chain length between the binaphthyl ring and the ester group was determined to be an ethylene spacer.     

Solid-state photocycloaddition of 6,6′-dimethyl-4,4′-[bis(methylenoxy)phenylene]-di-2-pyrones with benzophenone

Photocycloaddition reactions of 6,6′-dimethyl-4,4′-[bis(methylenoxy)phenylene]-di-2-pyrones (4a-c) with benzophenone (2a) by mixing in the solid state (solid solution) afforded the corresponding oxetane derivatives (5a-c; 1:2 adducts) with high site- and regioselectivity across the C5-C6 and C5′-C6′ double bonds in 4 via the triplet excited state of benzophenone. The oxetane formation proceeded more effectively in the solid state than in solution. The reaction mechanism was inferred by MO methods to be initiated by electrostatic interaction between the C6 position of 4a-c and the carbonyl oxygen of 2a in their ground states. The solid-state interaction may be enhanced by the electron density at the carbonyl oxygen of the triplet 2a. The transition state (TS) analysis of the [2+2] cycloaddition reactions also suggested some triplet complexes and high regioselectivity. The hydrogen-bonding interaction between 2a and 4a-c and the triplet reaction mechanism were also explained by the IR analyses and the quenching experiments, respectively.     

A convenient synthesis of benzofuro[3,2-c]isoquinolines and naphtho[1′,2′:4,5]furo[3,2-c]isoquinolines

A convenient method for the preparation of benzofuro[3,2-c]isoquinoline derivatives is described. The condensation reaction of methyl 2-(chloromethyl)-benzoate with substituted salicylonitriles 7a-c and intramolecular cyclization of the resulting substituted methyl 2-[(2-cyanobenzyl)oxy]benzoates 10a-c using potassium tert-butoxide results in the substituted benzofuro[3,2-c]isoquinolin-5(6H)-ones 1a-c. The same sequence of reactions starting from 2-(chloromethyl)benzonitrile and compounds 7a-c gave substituted 5-aminobenzofuro[3,2-c]isoquinolines 13a-c. In addition, this method is useful for the synthesis of other heterocycles. For example, using 1-cyano-2-naphthol 16, instead of the salicylonitriles 7a-c, gives naphtho[1′,2′:4,5]furo[3,2-c]isoquinolines.     

Synthesis and crystal structure of 2′-deoxy-2′-fluoro-4′-thioribonucleosides: substrates for the synthesis of novel modified RNAs

We report herein the synthesis of appropriately protected 2′-deoxy-2′-fluoro-4′-thiouridine (5), -thiocytidine (7), and -thioadenosine (35) derivatives, substrates for the synthesis of novel modified RNAs. The synthesis of 5 and 7 was achieved via the reaction of 2,2′-O-anhydro-4′-thiouridine (3) with HF/pyridine in a manner similar to that of its 4′-O-congener whereas the synthesis of 35 from 4′-thioadenosine derivatives was unsuccessful. Accordingly, 35 was synthesized via the glycosylation of the fluorinated 4-thiosugar 25 with 6-chloropurine. The X-ray crystal structural analysis revealed that 2′-deoxy-2′-fluoro-4′-thiocytidine (8) adopted predominately the same C3′-endo conformation as 2′-deoxy-2′-fluorocytidine.     

Synthesis of (±)-9-[c-4, t-5-bis(hydroxymethyl)cyclopent-2-en-r-1-yl]-9H-adenine (BCA) derivatives branched at the 4′-position based on intramolecular SH2′ cyclization

Synthesis of 4′-branched BCA analogues (5) was carried out. Stereospecific construction of the cis-disposed 4′-carbon-substituents and 5′-hydroxymethyl group was secured by employing the bicyclo[3.3.0]lactone 16 as a key intermediate, which was prepared by radical-mediated intramolecular S_H2′ cyclization of the phenylselenomethyl ester 15. After manipulation of the double bond of 16, bis(Boc)adenine was introduced based on the Mitsunobu reaction of the allyl alcohol 24. Transformation of the lactone function of 27 allowed preparation of the 4′-hydroxymethyl (31), the 4′-vinyl (32), the 4′-cyano (34), and the 4′-ethynyl (35) derivatives. Anti-HIV and anti-HCV activities of the free nucleosides 36-38 were also examined.     

Facile synthesis of chiral 2-formyl-1,1′-binaphthyl via lipase-catalyzed acylation and hydrolysis of 1,1′-binaphthyl oximes

Lipase-catalyzed acylation of 2-hydroxyiminomethyl-1,1′-binaphthyl [(±)-1] and hydrolysis of 2-acetoxyiminomethyl-1,1′-binaphthyl [(±)-2] yielded optically active oximes 1 and 2 with high enantiomeric excess. Successful synthesis of the optically active aldehyde 4 from chiral O-acetyl oxime 2 occurred without a decrease of enantiomeric excess.     

Application and details of photoinduced oxidative cyclization of 5-(4′,9′-methanocycloundeca-2′,4′,6′,8′,10′-pentaenylidene)pyrimidine-2,4,6(1,3,5H)-triones and related compounds

As novel methodology for synthesizing the furan ring, a photoinduced oxidative cyclization of 5-(4′,9′-methanocycloundeca-2′,4′,6′,8′,10′-pentaenylidene)pyrimidine-2,4,6(1,3,5H)-triones (7a-c) and related compounds 9a-c was accomplished to give 5,10-methanocycloundeca[4,5]furo[2,3-d]pyrimidine-2,4(1,3H)-dionylium tetrafluoroborates (8a-c⁺·BF₄⁻) and related compounds 2a-c⁺·BF₄⁻, respectively. In the photoinduced oxidative cyclization, the molecular oxygen in air is used as oxidant and the reaction proceeds under mild conditions to give desired products without byproducts, and thus, it is interesting from the viewpoint of the green chemistry. On the reactions of the mono-substituted derivatives 7d,e and 9e,f, the selectivity of the photoinduced cyclizations were reversed as compared with those of the DDQ-promoted oxidative cyclizations. By the NMR monitoring of the reactions of 7a and deuterated compound 7a-D₂ under degassed conditions, the details of the reaction pathway were clarified and rationalized on the basis of the MO calculation by the 6-31G^∗ basis set of the MP2 levels as well.     

Fluorous modification of 2,2′-bipyridine

A series of 2,2′-bipyridines featuring fluorinated alkyl groups [(CH₂)₃(CF₂)_xCF₃: x = 0, (1); 5, (2); 7, (3); 9 (4)] appended in the 4 and 4′ positions have been prepared. 1-4 were characterized by spectroscopy and physical methods including partition coefficient (biphase: perfluoromethylcyclohexane/toluene) and cyclic voltammetry (THF). Ab-initio calculations of vertical ionization potentials (VIPs) for 1-4 confirm the insulating role of the methylene spacers as the electrochemical reduction potentials of 1-4 are almost identical to that of 2,2′-bipyridine. Calculations for (CH₂)_nCF₃ derivatives (n = 0-10) describe a limit for impact of the CF₃ group through 9-10 methylenes. From both physical and theoretical data fluorinated alkyl groups of the formula (CH₂)₃(CF₂)_xCF₃ [x = 0-9] are inductively equivalent to a hydrogen substituent when appended to the bipyridine moiety.     

Synthesis of (±)-4′-ethynyl-5′,5′-difluoro-2′,3′-dehydro-3′-deoxy- carbocyclic thymidine: a difluoromethylidene analogue of promising anti-HIV agent Ed4T

Synthesis of (±)-4′-ethynyl-5′,5′-difluoro-2′,3′-dehydro-3′-deoxy-carbocyclic-thymidine (8) was carried out. The difluoromethylylidene group of 8 was constructed by the electrophilic fluorination to the cyclopentenone 11 by using Selectfluor^®. Introduction of thymine base was investigated based on the Mitsunobu reaction by employing cyclopentenyl allyl alcohols variously substituted at the 4-position. It was found the 4-methoxycarbonyl derivative 14 gave the highest selectivity both in terms of regio- and stereochemistry.     

Synthesis of (3′R,5′S)-3′-hydroxycotinine using 1,3-dipolar cycloaddition of a nitrone

To synthesize (3′R,5′S)-3′-hydroxycotinine [(+)-1], the main metabolite of nicotine (2), cycloaddition of C-(3-pyridyl)nitrones 3a, 3c, and 15 with (2R)- and (2S)-N-(acryloyl)bornane-10,2-sultam [(2R)- and (2S)-8] was examined. Among them, l-gulose-derived nitrone 15 underwent stereoselective cycloaddition with (2S)-8 to afford cycloadduct 16, which was elaborated to (+)-1.     

Efficient synthesis of novel dipyridoimidazoles and pyrido[1′,2′;1,2]imidazo[4,5-d]pyridazine derivatives

Novel dipyrido[1,2-a;3′,4′-d]imidazoles 7a-d, dipyrido[1,2-a;4′,3′-d]imidazoles 8a,c and pyrido[1′,2′;1,2]imidazo[4,5-d]pyridazine derivatives 9a-d were synthesized by two pathways: thermal electrocyclic reaction of 3-alkenylimidazopyridine-2-oximes 10 and direct condensation of ethyl glycinate (or hydrazine) with 2,3-dicarbonylimidazo[1,2-a]pyridines 11.     

A new synthetic procedure to spiro[cyclohexane-1,3′-indoline]-2′,4-diones

A new synthetic pathway to spiro[cyclohexane-1,3′-indoline]-2′,4-diones was found starting from 3-chloromethylene-2-indolones 1 and Danishefsky's diene 2. Their synthesis consists of several steps involving the formation of the cycloadducts, the 6-chloro-4-trimethylsilyloxy-2-methoxyspiro[cyclohex-3-en-1,3′-indolin]-2′-one derivatives, transformed into spiro[cyclohexa-2,5-dien-1,3′-indoline]-2′,4-diones via 6-chloro-spiro[cyclohex-2-en-1,3′-indoline]-2′,4-dione intermediates. The reduction of spiro[cyclohexa-2,5-dien-1,3′-indoline]-2′,4-diones gave spiro[cyclohexane-1,3′-indoline]-2′,4-diones 7. Using a ‘one pot reaction’, starting from 1 and 2, compounds 7 were obtained in satisfactory overall yield.     

Nucleophilic substitution approach to 4′-substituted thymidines by employing 4′-benzenesulfonyl leaving group

Synthesis of 4′-substituted thymidines was investigated based on nucleophilic substitution using organosilicon and organoaluminum reagents. Two substrates having a benzenesulfonyl leaving group at the 4′-position were prepared for this purpose: 1-[4-benzenesulfonyl-3,5-bis-O-(tert-butyldimethylsilyl)-2-deoxy-α-l-threo-pentofuranosyl]thymine (8α) and the 4′-(benzenesulfonyl)thymidine derivative (8β). The reaction of 8α with organosilicon reagents (Me₃SiCH₂CHCH₂ and Me₃SiN₃) in combination with SnCl₄ gave preferentially the 4′-substituted β-d-isomer: the 4′-allyl (12β) and 4′-azido (15β) derivatives, respectively. The reaction of 8α with AlMe₃, however, gave the 4′-methyl-α-l-isomer (16α) as the major product, presumably through an ion pair mechanism. By employing the substrate 8β in this reaction, the 4′-methylthymidine derivative (16β) was obtained exclusively in high yield. The 4′-ethyl (20β) and 4′-cyano (24β) derivatives were also synthesized by reacting 8β with the respective organoaluminum reagent.     

A facile synthesis of 3 or 3,3′-substituted binaphthols and their applications in the asymmetric addition of diethylzinc to aldehydes

By using a direct ortho-lithiation, the ligands (S)-3-methoxymethyl-1,1′-bi-2-naphthol [(S)-1], (S)-3,3′-bis(methoxymethyl)-1,1′-bi-2-naphthol [(S)-2], (S)-3-(quinolin-2-yl)-1,1′-bi-2-naphthol [(S)-3] and (S)-3,3′-bis(quinolin-2-yl)-1,1′-bi-2-naphthol [(S)-4] have been synthesized. (S)-1 and (S)-3 show moderate catalytic properties for the asymmetric diethylzinc addition to aromatic aldehydes.     

A facile synthesis of pyrrolo[1,2-a]benzimidazoles and pyrazolo[3,4:4′,3′]pyrrolo[1,2-a]benzimidazole derivatives

Reaction of 2-cyanomethylbenzimidazole 1 with hydrazonoyl halides 2 led to formation of pyrrolo[1,2-a]benzimidazole derivatives 7. Similar reaction of 1 with halides 3 afforded 5-amino-4-(benzimidazol-2-yl)pyrazole derivatives 11 or 1-amino-2-arylpyrazolo[3,4:4′,3′]pyrrolo[1,2-a]benzimidazol-4-one 14 depending on the reaction conditions. The mechanisms of the studied reactions are discussed.     

5′-Noraristeromycin possessing a C-1′ cyclopentyl double bond: a new carbanucleoside structural prototype

Prior to this work only two examples of carbanucleosides possessing a C-1′/C-6′ double bond had been reported and they were minor derivatized side products arising during other targeted syntheses. To develop this structural feature into a new class of potential antiviral agents, the 5′-nor derivative of aristeromycin with such an olefinic structure (6) represents the first example. In this regard, treatment of (1′S,2′S,3′S,4′R,5′S)-6-chloro-9-(2′,3′-isopropylidenedioxy-6′-oxabicyclo[3.1.0]hex-4′-yl)purine (7) with sodium methoxide yielded 6 via an E′₂-like elimination pathway. A convenient way to the C-4′ epimer of 6 (that is, 17) also arose during these studies and is described. Antiviral analysis of 6 and 17 failed to produce any significant activity.     

Non-C2-symmetrical antimony-phosphorus ligand, (R/S)-2-diphenylphosphano-2′-di(p-tolyl)stibano-1,1′-binaphthyl (BINAPSb): preparation and its use for asymmetric reactions as a chiral auxiliary

A new non-C₂-symmetrical antimony-phosphorous ligand, (±)-2-diphenyl-phosphano-2′-di(p-tolyl)stibano-1,1′-binaphthyl (BINAPSb) 3, has been prepared from 2-bromo-2′-diphenylphosphano-1,1′-naphthyl 4 via its borane complex 6, and could be resolved by the separation of a mixture of the diastereomeric palladium complexes 8A and 8B derived from the reaction of (±)-3 with optically active palladium reagent (S)-7. The enantiomerically pure BINAPSb 3 has proved to be highly effective in the palladium-catalyzed asymmetric hydrosilylation of styrene as a chiral auxiliary.     

From N,N-diphenyl-N-naphtho[2,1-b]thieno[2,3-b:3′,2′-d]dithiophene-5-yl-amine to propeller-shaped N,N,N-tri(naphtho[2,1-b]thieno[2,3-b:3′,2′-d]dithiophene-5-yl)-amine: syntheses and structures

Three unique propeller-shaped helicenyl amines compounds: N,N-diphenyl-N-naphtho[2,1-b]thieno[2,3-b:3′,2′-d]dithiophene-5-yl-amine (1), N-phenyl-N,N-di(naphtho[2,1-b]thieno[2,3-b:3′,2′-d]dithiophene-5-yl)amine (2), and N,N,N-tri(naphtho[2,1-b]thieno[2,3-b:3′,2′-d]dithiophene-5-yl)amine (3) were efficiently synthesized by Wittig reaction and oxidative photocyclization. The crystal structures of 1, 2 and molecular configuration optimization (DFT-B3LYP/6-31+G(d)) of 3 reveal that the steric hindrance from the moiety of trithia[5]helicene effectively forces the nitrogen atom and the three bonded carbon atoms to coplanar and the interplanar angles of the facing terminal thiophene ring and benzene ring becoming larger when the helical arm increased from 1 to 3. Electrochemical properties and UV–vis absorption behaviors of 1, 2, 3 were primarily determined by the moiety of trithia[5]helicene.     

The synthesis of R-3-alkoxy-1-(1′-hydroxyethyl)-4-methoxy-2-(1″-propenyl)benzenes utilizing Corey-Bakshi-Shibata asymmetric reductions

Pyrolysis of the 3-O-allyl derivative 7 of isovanillin followed by alkylation of the derived allylphenol 8 afforded a series of benzaldehyde derivatives 9-11 each of which was transformed by initial treatment with methylmagnesium bromide followed by oxidation of the corresponding alcohols with activated manganese dioxide into a series of ketones 15-17. Palladium(0) catalysed isomerization of the double bond in the prop-2′-enyl side-chain afforded ketones 36-38 which were subjected to the Corey-Bakshi-Shibata asymmetric reduction protocol to afford the R-3-alkoxy-1-(1′-hydroxyethyl)-4-methoxy-2-(1″-propenyl) benzenes 42-44 in yields of approximately 60% and with ee's of 75%.