Direct,Sequential, and Stereoselective Alkynylation of C,C‐Dibromophosphaalkenes

The first direct alkynylation of C,C‐dibromophosphaalkenes by a reaction with sulfonylacetylenes is reported. Alkynylation proceeds selectively in the trans position relative to the P substituent to afford bromoethynylphosphaalkenes. Owing to the absence of transition metals in the procedure, the previously observed conversion of dibromophosphaalkenes into phosphaalkynes through the phosphorus analog of the Fritsch–Buttenberg–Wiechell rearrangement is thus suppressed. The bromoethynylphosphaalkenes can subsequently be converted to C,C‐diacetylenic, cross‐conjugated phosphaalkenes by following a Sonogashira coupling protocol in good overall yields. By using the newly described method, full control over the stereochemistry at the P=C double bond is achieved. The substrate scope of this reaction is demonstrated for different dibromophosphaalkenes as well as different sulfonylacetylenes.     

An efficient, microwave-assisted, one-pot synthesis of indoles under Sonogashira conditions

A microwave-assisted, one-pot, three-component coupling reaction for the synthesis of indoles has been developed. The reaction is carried out in two steps under standard Sonogashira coupling conditions from an N-substituted/N,N-disubstituted 2-iodoaniline and a terminal alkyne, followed by the addition of acetonitrile and an aryl iodide. A variety of polysubstituted indoles have been prepared in moderate to excellent yields using the present method.     

A modular total synthesis of aculeatins A, B, E, F and 6-epi-aculeatins E, F

The total synthesis of aculeatins A, B, E and F confirming the assigned absolute configuration of recently isolated aculeatins E and F is documented. A convergent approach has been designed by the addition of both the terminal units (phenol and side chain) at an advanced stage. The central 1,3,5-triol unit with the requisite stereochemistry was prepared from the commercially available α-d-glucoheptonic-γ-lactone. Selective O-debenzylation during the hydrogenolysis of the diyne intermediate and the one pot phenolic oxidation with concomitant spiroketalization highlight the accomplished total syntheses.     

Di-t-butyl(ferrocenylmethyl)phosphine: air-stability, structural characterization, coordination chemistry, and application to palladium-catalyzed cross-coupling reactions

Di-t-butyl(ferrocenylmethyl)phosphine (1) has been isolated and structurally characterized. This ligand was found to be reasonably air stable as a solid and it has been shown to possess electron donating ability similar to that of tri-i-propylphosphine. A palladium catalyst bearing this ligand performed room temperature Suzuki-Miyaura coupling reactions with aryl bromides. Modest Heck coupling reactivity with aryl bromides was also observed at 100 °C. Complexation of 1 with Pd₂(dba)₃ led to formation of (1)₂Pd⁰. Addition of 4-bromoanisole to solutions containing both 1 and Pd₂(dba)₃ led to formation of an oxidative addition product when 1:Pd ratios were ?1. With a 2:1 ratio of 1:Pd, monophosphine complex formation and oxidative addition were significantly inhibited.     

Cobalt- and nickel-catalyzed regio- and stereoselective reductive coupling of alkynes, allenes, and alkenes with alkenes

Transition-metal-catalyzed coupling of two different C-C pi components through a metallacycle intermediate is a highly atom economical method to construct C-C bonds in organic synthesis. The metal-catalyzed coupling of an alkene and alkyne generally gives an Alder-ene or reductive coupling product. In this article, we focus on the cobalt- and nickel-catalyzed reductive coupling of alkynes, allenes, and alkenes with alkenes. These reductive coupling reactions provide convenient methods for the synthesis of various alkenes, dienes, functionalized alkanes, lactones, lactams, and cyclic alcohols in a highly regio- and stereoselective manner. A chemselective formation of metallacyclopentene intermediate from the two different C-C pi components and a low-valence metal species plays a key role for the high regio- and stereoselectivity of the catalytic reaction.     

Enantioselective synthesis of the farnesyltransferase inhibitor, A-345665.0

The stereoselective synthesis of A-345665.0 1, a novel farnesyl transferase inhibitor, is described. The key step involves a stereoselective addition of an imidazolyl Grignard reagent to aldehyde 8 in the presence of an external chiral auxiliary. Crystallization of the product as the dimeric zinc complex 12 facilitates the isolation of product in >98:2 er. The biaryl linkage is formed by the use of a Suzuki coupling, employing boronic acid 4 prepared by the directed ortho-lithiation of benzonitrile 6. The overall yield for the six step sequence is 21%.     

A SO2F2 mediated mild,practical, and gram-scale dehydroxylative transforming primary alcohols to quaternary ammonium salts

A simple, practical and gram-scale process for direct transformation of primary alcohols or silyl ethers to ammonium salts was developed. This method has the feathers of easy work-up (a simple filtration), mild condition, high yield, great practicality and robustness. And the application of the ammonium salts in Suzuki coupling reaction was also accomplished.     

A one-pot,multi-component reaction cascade for the rapid synthesis of diversely functionalized heteroaryl methyl substrates

A novel one-pot, “green” protocol to rapidly access pharmaceutically relevant heteroaryl methyl substrates is described. This process allows for a tandem S_N2/Suzuki-Miyaura reaction or Sonogashira reaction across a breadth of chemical diversity with yields ranging between 31 and 87% for the tandem Suzuki-Miyaura process and 50–66% for the tandem Sonogashira process. This procedure tolerates S, N, and O heteroatom linkers and is amenable for both rapid and robust lead development screening. In addition, T-type and N-type calcium channel blocker (15) was synthesized in 43% yield using this methodology which stands as an improvement in both yield and reaction time of the previously reported synthesis. The one-pot protocol also allows for the inclusion of greater chemical diversity within the scaffold of 15.     

Synthesis, optical, electrochemical, and thermal properties of conjugated α-fluorenyl oligothiophenes

A series of new α-fluorenyl oligothiophenes up to the pentamer have been synthesized using Suzuki cross-coupling and bromination reactions. The optical, electrochemical, and thermal properties of these materials can be tuned by varying the number of thiophene rings. The longer oligomers (n ? 4) were stable, crystalline, and unreactive to electrochemical oxidative dimerization.     

Synthesis of the (3R, 9S, 10S)-Diastereoisomer of Panaxytriol,a Potent Antitumor Polyacetylene from Panax ginseng

In1983,panaxytriolIwasfirstisolated"'asadiacetylenicconstituentfromPanalginseng.Sincethen,thebiologicalactivityof1hasbeenextensiviyinvestigatedandrecentlyithasbeenreceivedattentionasapotentialnewtypeofantitumoragent"'.TheabsoluteconfigurationsofIwere...     

铜、镍、钯催化C—C偶合反应的研究进展

偶合反应是有机合成中的一种重要反应,本文综述了Cu、Ni、Pd等不同形式催化剂催化C-C偶合反应的研究进展,并展望优化该类反应的条件．     

β,β′-Corrole dimers

Three corrole dimers were obtained by heating a 1,2,4-trichlorobenzene solution of 5,10,15-tris(pentafluorophenyl)corrole at 200 °C. The corrole units are linked by the β,β′-positions. In one of these dimers the corrole units are linked by the 2,2′,18,18′ carbons, giving rise to an eight-membered ring.     

9-fluorenylphosphines for the Pd-catalyzed sonogashira, suzuki, and Buchwald-Hartwig coupling reactions in organic solvents and water

The lithiation/alkylation of fluorene leads to various 9-alkyl-fluorenes (alkyl=Me, Et, iPr, -Pr, -C18H25) in>95% yields, for which lithiation and reaction with R2PCl (R=Cy, iPr, tBu) generates 9-alkyl, 9-PR2-fluorenes which constitute electron-rich and bulky phosphine ligands. The in-situ-formed palladium-phosphine complexes ([Na2PdCl4], phosphonium salt, base, substrates) were tested in the Sonogashira, Suzuki, and Buchwald-Hartwig reactions of aryl chlorides and aryl bromides in organic solvents. The Sonogashira coupling of aryl chlorides at 100-120 degrees C leads to>90% yields with 1 mol% of Pd catalyst. The Suzuki coupling of aryl chlorides typically requires 0.05 mol% of Pd catalyst at 100 degrees C in dioxane for quantitative product formation. To carry out "green" cross-coupling reactions in water, 9-ethylfluorenyldicyclohexylphosphine was reacted in sulphuric acid to generate the respective 2-sulfonated phosphonium salt. The Suzuki coupling of activated aryl chlorides by using this water-soluble catalyst requires only 0.01 mol% of Pd catalyst, while a wide range of aryl chlorides can be quantitatively converted into the respective coupling products by using 0.1-0.5 mol% of catalyst in pure water at 100 degrees C. Difficult substrate combinations, such as naphthylboronic acid or 3-pyridylboronic acid and aryl chlorides are coupled at 100 degrees C by using 0.1-0.5 mol% of catalyst in pure water to obtain the respective N-heterocycles in quantitative yields. The copper-free aqueous Sonogashira coupling of aryl bromides generates the respective tolane derivatives in>95% yield.     

STRONG INADEQUATE,an experiment for detection of small J(C,C) couplings in symmetrical molecules

A new version of the two-dimensional INADEQUATE experiment was designed for detection of small couplings between equivalent carbon atoms separated in the molecule by several bonds, where other techniques fail due to rich line splitting and mutual peak cancellation in many molecules. As the proposed method is suitable for detection of couplings in strongly coupled systems in general, we propose the name STRONG INADEQUATE in the paper. Similar to other methods for detection of couplings between equivalent carbons, the STRONG INADEQUATE experiment utilizes one-bond carbon–proton coupling for creation of the effective chemical shift differences. The STRONG INADEQUATE experiment works superbly for ⁿJ_CC, where n ≥ 3. Then the F1 pattern is reduced to a simple antiphase doublet with ⁿJ_CC separation, and this pattern is also preserved when a symmetrical HC···C′H′ system is coupled to other protons. Even in the measurement of ²J_CC couplings, the STRONG INADEQUATE experiment generates a much simpler pattern than the original pulse sequences for measurement of couplings between equivalent carbons.     

Steric effects in palladium-catalysed amination of aryl triflates and nonaflates with the primary amines PhCH(R)NH2 (R=H, Me)

A systematic study of the effects of aryl triflate and nonaflate structure on the yield of amination with the primary amines PhCH(R)NH₂ (R=H, Me) under palladium catalysis has been carried out. High throughput screening indicated that a catalyst composed of X-Phos/Pd₂(dba)₃/1,4-dioxane was optimal based on a model reaction of Ar(OR_f) [R_f=Tf (SO₂CF₃), Nf (SO₂(CF₂)₃CF₃)] with PhCH₂NH₂. Comparisons of the reactivity of various ArOTf and ArONf [Ar=4-MePh, 2-naphthyl, 1-naphthyl, 2-PhC₆H₄] indicated that both ortho substitution in the aryl electrophile and at the α-position on the amine are detrimental to the coupling particularly when they occur in combination. Despite being formally a monodentate ligand use of X-Phos leads to only small degrees of racemisation when using (R)-PhCH(Me)NH₂ (typically resulting in a reduction from 97 to 86-94% ee for the amine stereocentre).     

Expedient Iron‐Catalyzed Coupling of Alkyl,Benzyl and Allyl Halides with Arylboronic Esters

While attractive, the iron‐catalyzed coupling of arylboron reagents with alkyl halides typically requires expensive or synthetically challenging diphosphine ligands. Herein, we show that primary and secondary alkyl bromides and chlorides, as well as benzyl and allyl halides, can be coupled with arylboronic esters, activated with alkyllithium reagents, by using very simple iron‐based catalysts. The catalysts used were either adducts of inexpensive and widely available diphosphines or, in a large number of cases, simply [Fe(acac)₃] with no added co‐ ligands. In the former case, preliminary mechanistic studies highlight the likely involvement of iron(I)–phosphine intermediates.     

Effect of magnetic exchange,double exchange,vibronic coupling,and asymmetry on magnetic properties in d2–d3 mixed‐valence dimers

The effect of magnetic exchange, double exchange, vibronic coupling, and asymmetry on magnetic properties of d²–d³ systems is discussed. The temperature‐dependent magnetic moment was calculated with the semiclassical adiabatic approach. The results show that the vibronic coupling from the out‐of‐phase breathing vibration on the metal sites (Piepho, Krausz, and Schatz [PKS] model) and the vibronic coupling from the stretching vibration between the metal sites (P model) favor the localization and delocalization of the “extra” electron in mixed‐valence dimers, respectively. The magnetic properties are determined by the interplay among magnetic exchange, double exchange, and vibronic coupling. The results obtained by analyzing d²–d³ systems can be generalized to other full delocalized dinuclear mixed valence systems with a unique transferable electron. © 2005 Wiley Periodicals, Inc. Int J Quantum Chem, 2005     

Stereospecific preparation of (1E,3E,5E)-3.4-difluoro-1,6-diphenylhexatriene and (2E,4E,6E)-diethyl-4,5-difluoroocta-2,4,6-trienedioate

Palladium(0) catalyzed coupling of β-bromostyrene (E/Z = 89/11) with (E)-(1,2-difluoro-1,2-ethenediyl)bis[tributylstannane], 1, in DMF at room temperature stereospecifically gave only (1E,3E,5E)-3,4-difluoro-1,6-diphenylhexatriene. Similarly, palladium(0) catalyzed coupling of (E)-ethyl 3-bromoacrylate as the vinyl halide precursor stereospecifically gave (2E,4E,6E)-diethyl-4,5-difluoroocta-2,4,6-trienedioate. This work demonstrates that a non-fluorine-containing vinyl bromide will selectively undergo coupling with 1 and enable the stereospecific preparation of a mixed polyene system. The (E)-ethyl 3-bromoacrylate coupling with 1 illustrates that mixed functionalized hexatriene systems can be easily accessed via this methodology. The X-ray structure of (2E,4E,6E)-diethyl-4,5-difluoroocta-2,4,6-trienedioate confirmed its structure.     

Synthesis of substituted acetylenes, aryl-alkyl ethers, 2-alkene-4-ynoates and nitriles using heterogeneous mesoporous Pd-MCM-48 as reusable catalyst

Pd-MCM-48 has been employed as a heterogeneous catalyst for the synthesis of substituted acetylenes via Sonogashira reactions under copper and amine-free reaction conditions. In addition, the catalyst exhibited excellent regioselectivity for primary alcohols towards C-O coupling leading to formation of alkyl-aryl ethers in high yields. A green procedure for the stereoselective synthesis of 2-alkene-4-ynoates and nitriles from the reactions of vic-(E)-diiodoalkenes with activated alkenes has also been demonstrated using Pd-MCM-48 catalyst. The catalyst was easily recovered from the reaction mixture by filtration and reused for at least six times with minimal loss of activity.