MALDI-TOF/TOF CID study of poly(α-methylstyrene) fragmentation reactions

MALDI-TOF/TOF CID experiments are reported for hydroxylated poly(α-methylstyrene) precursor ions (PAMS: m/z 1,445.9 (n = 10), 2,036.3 (n = 15), 2,626.7 (n = 20), 3,217.1 (n = 25), and 3,807.5 (n = 30), where the number of repeat units n corresponds to the oligomer mass numbers). The influences of structure, molecular weight, and kinetic energy on degradation mechanisms were examined to test the generality of our multi-chain fragmentation model developed for polystyrene. Our results indicate that poly(α-methylstyrene) free radicals are formed initially through multiple chain breaks and subsequently undergo a variety of depolymerization reactions to yield predominantly monomer and dimer species; the intensity of each species depends on the effective kinetic energy selected for the CID process. Each depolymerization mechanism is presented in detail with experimental and computational data to justify/rationalize the process and its kinetic energy dependence. These processes show the complex interrelationships between the various pathways along with preferred production of tertiary radicals, which suppresses the appearance of primary radicals. Additionally, Py-GC/MS experimental data are presented to allow a comparison of the multimolecular free radical reactions in pyrolysis with the unimolecular fragmentation reactions of MS/MS. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Effect of end group polarity upon the lower critical solution temperature of poly(2-isopropyl-2-oxazoline)

Thermo-sensitive poly(2-isopropyl-2-oxazoline)s (PiPrOx) were functionalized with end groups of different polarity by living cationic ring-opening polymerization using the initiator and/or termination method as well as sequential block copolymerization with 2-methyl-2-oxazoline. As end groups, methyl, n-nonyl, piperidine, piperazine as well as oligo(ethylenglygol) and oligo(2-methyl-2-oxazoline) were introduced quantitatively. The lower critical solution temperature (LCST) of the aqueous solutions was investigated. The introduction of hydrophobic end groups decreases the LCST, while hydrophilic polymer tails raise the cloud point. In comparison to poly(N-isopropyl acrylamide), the impact of the end group polarity upon the modulation of the LCST was found to be significantly stronger. Surprisingly, terminal oligoethylenegycol units also decrease the LCST of PiPrOx, thus acting as moieties of higher hydrophobicity as compared to the poly(2-oxazoline) main chain. Together with the possible variation of the side group polarity, this allows a broad modulation of the LCST of poly(2-oxazoline)s.     

New concept for a toxicity assay based on multiple indexes from the wave shape of damped metabolic oscillation induced in living yeast cells (part I): characterization of the phenomenon

The damped glycolytic oscillation phenomenon occurring in starved cells of the yeast Saccharomyces cerevisiae (NBRC 0565) was characterization for application to a toxicity bioassay. S. cerevisiae was grown under semi-anaerobic conditions. The transient oscillations were observed photometrically as the time course of the fluorescent intensity of reduced pyridine nucleotide resulting from instantaneous addition of glucose to a cell suspension. In this study, simple and reproducible conditions inducing damped oscillations were obtained by modifying a literature method. For estimation of the wave shapes of the damped oscillations we used six indexes. To investigate the total reproducibility as the averaged relative standard deviation (RSD_av) for the six indexes obtained from the wave shapes, the damped oscillations were induced under the optimum conditions and the RSD_av values were calculated as 14% in a buffer cell suspension (n = 62) and 22% in a water cell suspension (n = 78). Finally, the effects of glucose concentration on the six indexes were examined, and all the indexes changed when the glucose concentration was changed. Excellent correlations were obtained between the index of oscillation-state time and the concentration of glucose in a buffer cell suspension (r = 0.9985, 0.5–250 mmol L⁻¹, 10 points) and in a water cell suspension (r = 0.9989, 2.5 μmol L⁻¹–250 mmol L⁻¹, 12 points), respectively. Figure Characterization of damped glycolytic oscillation, (a) typical shape, and (b) its estimation Electronic supplementary material The online version of this article (doi:)contains supplementary material, which is available to authorized users.     

Synthesis and electrochemical properties of LiNi0.9-xCo0.1SnxO2 as cathode materials for lithium secondary batteries

LiNi_0.9-x Co_0.1Sn _x O₂ (x = 0.00, 0.02, and 0.03) were synthesized via the rheological phase reaction method and characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and electrochemical tests. The sample of LiNi_0.9-x Co_0.1Sn _x O₂ (x = 0.02) not only shows good cycle performance but also exhibits an excellent discharge capacity of 188 mAh/g in the first cycle at a current density of 100 mA/g in the voltage range of 3.0–4.3 V. The tin doping results in reducing the resistance and increasing conductivity of LiNi_0.9-x Co_0.1Sn _x O₂. This composite oxide is promising as cathode material for lithium-ion battery.     

Effects of salt on the temperature and pressure responsive properties of poly(N-vinylisobutyramide) aqueous solutions

 We examined the effects of salt on the lower critical solution temperature (LCST) and lower critical solution pressure (LCSP) of aqueous solutions of poly (N-vinylisobutyramide), polyNVIBA, and compared them with those on poly(N-isopropylacrylamide), polyNIPAAm. We found that the addition of salt (such as Na₂SO₄, NaCl, or KCl) decreased the LCST of aqueous polyNVIBA from 45 °C to below 20 °C, almost linearly with the salt concentrations and dependent on the type of salt. We observed a similar concentration-dependent decrease in LCST for polyNIPAAm. When KI or NaSCN was added to each aqueous polymer solution, some smaller increases in LCST were observed at relatively low salt concentrations; higher concentrations of salt gave an almost linear decrease in LCST. As for LCSP, the addition of most types of salt lowered the transition pressure, but the effects were much more dependent on the type and the valence of the salt (especially of anion) in both polymers. Salt with divalent anion showed a larger decrease in LCSP, but those with mono valent anion showed a relatively small decrease, even showed a slight increase at lower salt concentrations in the case of polyNVIBA. Salt with I^- or SCN^- showed evident increases in LCSP up to 1 M and was maintained higher than the control even at 2 M. We discuss the interactions of the amide group in the side chains of polymers and water and their perturbation by ions. Received: 13 November 1997 Accepted: 22 January 1998     

Determination of butoxyacetic acid (biomarker of ethylene glycol monobutyl ether exposure) in human urine candidate reference material

Ethylene glycol monobutyl ether (EGBE), an industrial solvent, is absorbed by the body not only by inhalation but also by dermal absorption (liquid or vapour). EGBE is metabolized to butoxyacetic acid (BAA). Pooled freeze-dried urine candidate reference material (RM) was prepared from urine obtained from persons occupationally exposed to EGBE. This material has the advantage of containing butoxyacetic acid in both the free and conjugated (glutamine and glycine) forms, as found in native urine. In all GC method modifications used, acid hydrolysis was used to release BAA from its conjugated form. The amount of butoxyacetic acid in homogeneity and stability testing was measured by GC after derivatisation with N-tert-butyldimethylsilyl-N-methyltrifluoroacetamide. Detection was by MS in EI mode, in the authors’ laboratory. For interlaboratory comparison of the reference material GC methods with MS, FID, and ECD were used. Different extraction solvents (dichloromethane–isopropanol 2:1, ethyl acetate, or dichloromethane) and derivatisation reagents (trimethylsilyldiazomethane, N-tert-butyldimethylsilyl-N-methyltrifluoroacetamide) were used. Using ANOVA (at the statistical level α = 0.05) no changes were found in the concentration of butoxyacetic acid during fifteen month isochronous stability testing, or in homogeneity testing. The uncertainty contributions were u _h = 8.8 mg L⁻¹ and u _s = 6.5 mg L⁻¹. The concentration of butoxyacetic acid in freeze-dried urine RM was evaluated from the results of eight laboratory data sets within an interlaboratory comparison by use of the interactive statistical software IPECA. The contribution to total uncertainty derived from interlaboratory comparison was u _i = 12.7 mg L⁻¹. The reference value (c = 273 ± 33 mg L⁻¹) is an unweighted arithmetic average of accepted results. The value is traceable to the pure butoxyacetic acid (98% w/w; Acros Organic #257760010) used as calibrant. The uncertainty given is combined expanded uncertainty derived from the results from interlaboratory comparison, and from homogeneity and stability tests (k = 2). The reference material will be used to verify method performance in the biological monitoring of occupational exposure to EGBE.     

Development of a highly precise ID-ICP-SFMS method for analysis of low concentrations of lead in rice flour reference materials

Microwave digestion and isotope dilution inductively coupled plasma mass spectrometry (ID-ICP-SFMS) has been applied to the determination of Pb in rice flour. In order to achieve highly precise determination of low concentrations of Pb, the digestion blank for Pb was reduced to 0.21 ng g⁻¹ after optimization of the digestion conditions, in which 20 mL analysis solution was obtained after digestion of 0.5 g rice flour. The observed value of Pb in a non-fat milk powder certified reference material (CRM), NIST SRM 1549, was 16.8 ± 0.8 ng g⁻¹ (mean ± expanded uncertainty, k = 2; n = 5), which agreed with the certified value of 19 ± 3 ng g⁻¹ and indicated the effectiveness of the method. Analytical results for Pb in three brown rice flour CRMs, NIST SRM 1568a, NIES CRM 10-a, and NIES CRM 10-b, were 7.32 ± 0.24 ng g⁻¹ (n = 5), 1010 ± 10 ng g⁻¹ (n = 5), and 1250 ± 20 ng g⁻¹ (n = 5), respectively. The concentration of Pb in a candidate white rice flour reference material (RM) sample prepared by the National Metrology Institute of Japan (NMIJ) was observed to be 4.36 ± 0.28 ng g⁻¹ (n = 10 bottles). Figure Digestion blank of Pb was carefully reduced to approximately 0.2 ng g^-1 which permitted the highly precise determination of Pb at low ng g^-1 level in foodstuff samples by ID-SFMS     

Characterizing ion mobility-mass spectrometry conformation space for the analysis of complex biological samples

The conformation space occupied by different classes of biomolecules measured by ion mobility-mass spectrometry (IM-MS) is described for utility in the characterization of complex biological samples. Although the qualitative separation of different classes of biomolecules on the basis of structure or collision cross section is known, there is relatively little quantitative cross-section information available for species apart from peptides. In this report, collision cross sections are measured for a large suite of biologically salient species, including oligonucleotides (n = 96), carbohydrates (n = 192), and lipids (n = 53), which are compared to reported values for peptides (n = 610). In general, signals for each class are highly correlated, and at a given mass, these correlations result in predicted collision cross sections that increase in the order oligonucleotides < carbohydrates < peptides < lipids. The specific correlations are described by logarithmic regressions, which best approximate the theoretical trend of increasing collision cross section as a function of increasing mass. A statistical treatment of the signals observed within each molecular class suggests that the breadth of conformation space occupied by each class increases in the order lipids < oligonucleotides < peptides < carbohydrates. The utility of conformation space analysis in the direct analysis of complex biological samples is described, both in the context of qualitative molecular class identification and in fine structure examination within a class. The latter is demonstrated in IM-MS separations of isobaric oligonucleotides, which are interpreted by molecular dynamics simulations. Figure Potential for performing simultaneous “omics” through the separation of biomolecular classes on the basis of structure and mass using ion mobility-mass spectrometry Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.

Preparation and characterization of multiresponsive polymer composite microspheres with core–shell structure

Fe₃O₄/SiO₂/poly (N-isopropylacrylamide-co-N,N-dimethylaminoethyl methacrylate) [P(NIPAM-co-DMA)] multiresponsive composite microspheres with core–shell structure were synthesized by template precipitation polymerization. First, the magnetite nanoparticles were coated with silica and then modified with 3-(trimethoxysilyl)-propyl methacrylate (MPS). Subsequently, the Fe₃O₄/SiO₂ particles grafted with MPS were used to seed the precipitation copolymerization of NIPAM and DMA. The composite microspheres with core–shell structure were superparamagnetic, pH-sensitive, and thermoresponsive. The swelling ratio (D_{25 °C, pH = 3}/D_{50 °C, pH = 9})³ coupling of pH and temperature increased up to 21.2, which was much higher than that without comonomer DMA.     

Cage Structure Formation of Singly Doped Aluminum Cluster Cations Al<Subscript><Emphasis Type="BoldItalic">n</Emphasis></Subscript><Emphasis Type="BoldItalic">TM</Emphasis><Superscript>+</Superscript> (<Emphasis Type="BoldItalic">TM</Emphasis> = Ti,V, Cr)

Structural information on free transition metal doped aluminum clusters, Al _n TM ⁺ (TM = Ti, V, Cr), was obtained by studying their ability for argon physisorption. Systematic size (n = 5 – 35) and temperature (T = 145 – 300 K) dependent investigations reveal that bare Al _n ⁺ clusters are inert toward argon, while Al _n TM ⁺ clusters attach one argon atom up to a critical cluster size. This size is interpreted as the geometrical transition from surface-located dopant atoms to endohedrally doped aluminum clusters with the transition metal atom residing in an aluminum cage. The critical size, n _crit , is found to be surprisingly large, namely n _crit = 16 and n _crit = 19 – 21 for TM = V, Cr, and TM = Ti, respectively. Experimental cluster–argon bond dissociation energies have been derived as function of cluster size from equilibrium mass spectra and are in the 0.1–0.3 eV range.     

Characterization of currently marketed heparin products: analysis of molecular weight and heparinase-I digest patterns

We evaluated polyacrylamide gel electrophoresis (PAGE) and size exclusion chromatography coupled with multi-angle laser light scattering (SEC-MALLS) approaches to determine weight-average molecular weight (M _w) and polydispersity (PD) of heparins. A set of unfractionated heparin sodium (UFH) and low-molecular-weight heparin (LMWH) samples obtained from nine manufacturers which supply the US market were assessed. For SEC-MALLS, we measured values for water content, refractive index increment (dn/dc), and the second virial coefficient (A ₂) for each sample prior to molecular weight assessment. For UFH, a mean ± standard deviation value for M _w of 16,773 ± 797 was observed with a range of 15,620 to 18,363 (n = 20, run in triplicate). For LMWHs by SEC-MALLS, we measured mean M _w values for dalteparin, tinzaparin, and enoxaparin of 6,717 ± 71 (n = 4), 6,670 ± 417 (n = 3), and 3,959 ± 145 (n = 3), respectively. PAGE analysis of the same UFH, dalteparin, tinzaparin, and enoxaparin samples showed values of 16,135 ± 643 (n = 20), 5,845 ± 45 (n = 4), 6,049 ± 95 (n = 3), and 4,772 ± 69 (n = 3), respectively. These orthogonal measurements are the first M _w results obtained with a large heparin sample set on product being marketed after the heparin crisis of 2008 changed the level of scrutiny of this drug class. In this study, we compare our new data set to samples analyzed over 10 years earlier. In addition, we found that the PAGE analysis of heparinase digested UFH and neat LMWH samples yield characteristic patterns that provide a facile approach for identification and assessment of drug quality and uniformity.     

Surfactant effect on the lower critical solution temperature of poly(organophosphazenes) with methoxy-poly(ethylene glycol) and amino acid esters as side groups

 The surfactant effect on the lower critical solution temperature (LCST) of thermosensitive poly(organophosphazenes) with methoxy-poly(ethylene glycol) and amino acid esters as side groups was examined in terms of molecular interactions between the polyphosphazenes and surfactants including various anionic, cationic, and nonionic surfactants in aqueous solution. Most of the anionic and cationic surfactants increased the LCST of the polymers: the LCST increased more sharply with increasing length and hydrophobicity of the hydrophobic part of the surfactant molecule. The ΔLCSTs (T _0.03M− T _0M), the change in the LCST by addition of 0 and 0.03 M sodium dodecyl sulfate (SDS), were found to be 7.0 and 14.5 °C for the polymers bearing ethyl esters of glycine and aspartic acid, respectively. The LCST increase of poly(organophosphazene) having a more hydrophobic aspartic acid ethyl ester was 2 times larger compared with that of the polymer having glycine ethyl ester as a side group. The binding behavior of SDS to the polymer bearing glycine ethyl ester as a hydrophobic group was explained from the results of titration of the polymer solutions containing SDS with tetrapropylammonium bromide. Graphic models for the molecular interactions of polymer/surfactant and polymer/surfactant/salt in aqueous solutions were proposed. Received: 17 February 2000/Accepted: 25 April 2000     

Optimisation of the extraction of olive (Olea europaea) leaf phenolics using water/ethanol-based solvent systems and response surface methodology

An experimental setup based on a 2³ full-factorial, central-composite design was implemented with the aim of optimising the recovery of polyphenols from olive leaves by employing reusable and nontoxic solutions composed of water/ethanol/citric acid as extracting media. The factors considered were (i) the pH of the medium, (ii) the extraction time and (iii) the ethanol concentration. The model obtained produced a satisfactory fit to the data with regard to total polyphenol extraction (R ² = 0.91, p = 0.0139), but not for the antiradical activity of the extracts (R ² = 0.67, p = 0.3734). The second-order polynomial equation obtained after analysing the experimental data indicated that ethanol concentration and time mostly affected the extraction yield, but that increased pH values were unfavourable in this regard. The maximum theoretical yield was calculated to be 250.2 ± 76.8 mg gallic acid equivalent per g of dry, chlorophyll-free tissue under optimal conditions (60% EtOH, pH 2 and 5 h). Liquid chromatography–electrospray ionisation mass spectrometry of the optimally obtained extract revealed that the principal phytochemicals recovered were luteolin 7-O-glucoside, apigenin 7-O-rutinoside and oleuropein, accompanied by smaller amounts of luteolin 3′,7-O-diglucoside, quercetin 3-O-rutinoside (rutin), luteolin 7-O-rutinoside and luteolin 3′-O-glucoside. Simple linear regression analysis between the total polyphenol and antiradical activity values gave a low and statistically insignificant correlation (R ² = 0.273, p > 0.05), suggesting that it is not the sheer amount of polyphenols that provides high antioxidant potency; instead, this potency is probably achieved through interactions among the various phenolic constituents.     

Quantitative in silico analysis of the selectivity of graphitic carbon synthesized by different methods

Molecular interaction energy (MI) values calculated by molecular mechanics (MM2) using a model graphitic carbon phase were used for studying the selectivity of different types of graphitic carbon columns. The MI values well correlated with logk values measured on a graphitic carbon synthesized from 100% organic materials (r = 0.961, n = 13) but not with logk values measured on a graphitic carbon synthesized using silica matrix (r = 0.558, n = 17). The latter logk values correlated well with the hydrogen bonding energy values calculated using a model silica phase (r = 0.856, n = 17). The reason for the poor correlation of the logk values measured on the latter graphitic carbon is that the silica matrix might not be completely eliminated in the production process.     

Polymer diffusion in high-M/low-M hard-soft latex blends

This paper describes experiments that investigate the use of low glass transition temperature (T _g) latex particles consisting of oligomer to promote polymer diffusion in films formed from high molar mass polymer latex. The chemical composition of both polymers was similar. Fluorescence resonance energy transfer (FRET) was used to follow the rate of polymer diffusion for samples in which the high molar mass polymer was labeled with appropriate donor and acceptor dyes. In these latex blends, the presence of the oligomer (with M _n = 24,000 g/mol, M _w/M _n = 2) was so effective at promoting the interdiffusion of the higher molar mass poly(butyl acrylate-co-methyl methacrylate; PBA/MMA = 1:1 by weight) polymer (with M _n = 43,00 g/mol, M _w/M _n = 3) that a significant amount of interdiffusion occurred during film drying. Additional polymer diffusion occurred during film aging and annealing, and this effect could be described quantitatively in terms of free-volume theory. This paper is dedicated to Professor Haruma Kawaguchi to honor his many contributions to the field of latex particles and their applications.     

Al,B, and F doped LiNi<Subscript>1/3</Subscript>Co<Subscript>1/3</Subscript>Mn<Subscript>1/3</Subscript>O<Subscript>2</Subscript> as cathode material of lithium-ion batteries

A series of the mixed transition metal compounds, Li[(Ni_1/3Co_1/3Mn_1/3)_1–x-y Al _x B _y ]O_2-z F _z (x = 0, 0.02, y = 0, 0.02, z = 0, 0.02), were synthesized via coprecipitation followed by a high-temperature heat-treatment. XRD patterns revealed that this material has a typical α-NaFeO₂ type layered structure with R3^- m space group. Rietveld refinement explained that cation mixing within the Li(Ni_1/3Co_1/3Mn_1/3)O₂ could be absolutely diminished by Al-doping. Al, B and F doped compounds showed both improved physical and electrochemical properties, high tap-density, and delivered a reversible capacity of 190 mAh/g with excellent capacity retention even when the electrodes were cycled between 3.0 and 4.7 V.     

The preparation, molecular structure, and theoretical study of carbohydrazide (CHZ)

Carbohydrazide is prepared by reacting dimethyl carbonate with hydrazine hydrate. Its single crystal has been cultured with slow evaporation method. Its molecular structure and crystal structure have been determined by X-ray single crystal diffraction technique. The obtained results shows that the crystal belongs to Crystal system of Monoclinic, space group P2(1)/n with crystal parameters of a = 3.725(1), b = 8.834(2), c = 11.96(3), β = 91.97(1)°, V = 392.23(2) ³, Z = 4, D _c = 1.522 g/cm³, μ = 0.128 mm⁻¹, F0 0 0) = 192. Based on the crystal data, we have also carried quantum chemistry calculations on the title compound using the B3LYP and MP2 method with cc-pVTZ basis set. The calculation results further demonstrate the molecular structure of title compound and its coordination properties.     

Crystal Structures of Na3PO2S2 · 11H2O and Na3POS3 · 11H2O

Summary.  Single crystals of sodium dithiophosphate undecahydrate (Na₃PO₂S₂ · 11H₂O) and sodium trithiophosphate undecahydrate (Na₃POS₃ · 11H₂O) were grown from aqueous solution. The crystal structures of Na₃PO₂S₂ · 11H₂O (P2₁2₁2₁; a = 1248.1(1), b = 945.2(1), c = 1383.1(1) pm; R ₁ = 0.0202, wR ₂ = 0.0502) and Na₃POS₃ · 11H₂O (Pna2₁; a = 1262.0(2), b = 947.6(2), c = 1431.5(2) pm; R ₁ = 0.0720, wR ₂ = 0.1371) are related to each other in a sense that all constituting units are arranged in similar positions and with similar orientations. The geometries of the anions were determined with high accuracy; thus, the structural parameters of the POS³⁻ ₃ anion were measured for the first time. Received September 25, 2001. Accepted January 21, 2002     

Modeling of Protonation Constants of Linear Aliphatic Dicarboxylates Containing -S-Groups in Aqueous Chloride Salt Solutions,at Different Ionic Strengths,Using the SIT and Pitzer Equations and Empirical Relationships

The protonation constants of ethylenedithiodiacetic, dithiodipropionic and dithiodibutyric acids were obtained from potentiometric measurements in NaCl(aq) (I≤5 mol⋅L⁻¹) and (CH₃)₄NCl(aq) (I≤3 mol⋅L⁻¹) at t=25 °C. Their dependences on ionic strength were modeled by the SIT and Pitzer approaches. The activity coefficients of the neutral species were obtained by solubility measurements. The literature values of the protonation constants of (HOOC)-(CH₂) _n -S-(CH₂) _n -(COOH) (n=1 to 3) and (HOOC)-(CH₂)-S-(CH₂) _n -S-(CH₂)-(COOH) (n=0 to 5) in NaCl(aq) and KCl(aq) (I≤3 mol⋅L⁻¹) at 18 °C were also analyzed using the above approaches. Both the log ₁₀ K _i ^H and interaction parameter values follow simple linear trends as a function of certain structural characteristics of the ligands. Examples of modeling these trends are reported. Electronic Supplementary Material The online version of this article () contains supplementary material, which is available to authorized users.     

Broad-spectrum drug screening of meconium by liquid chromatography with tandem mass spectrometry and time-of-flight mass spectrometry

Analysis of the major drugs of abuse in meconium has been established in clinical practice for detecting fetal exposure to illicit drugs, particularly for the ready availability of the sample and ease of collection from diapers, compared with neonatal hair and urine. Very little is known about the occurrence and detection possibilities of therapeutic and licit drugs in meconium. Meconium specimens (n = 209) were collected in delivery hospitals, from infants of mothers who were suspected to be drug abusers. A targeted analysis method by liquid chromatography–triple quadrupole mass spectrometry (LC-MS/MS) was developed for abused drugs: amphetamine, methamphetamine, 3,4-methylenedioxyamphetamine, 3,4-methylenedioxymethamphetamine, morphine, codeine, 6-monoacetylmorphine, oxycodone, methadone, tramadol, buprenorphine, and norbuprenorphine. A separate LC-MS/MS method was developed for 11-nor-∆⁹-tetrahydrocannabinol-9-carboxylic acid. A screening method based on LC coupled to time-of-flight MS was applied to a broad spectrum of drugs. As a result, a total of 77 different compounds were found. The main drug findings in meconium were as follows: local anesthetics 82.5% (n = 172), nicotine or its metabolites 61.5% (n = 129), opioids 48.5% (n = 101), stimulants 21.0% (n = 44), hypnotics and sedatives 19.0% (n = 40), antidepressants 18.0% (n = 38), antipsychotics 5.5% (n = 11), and cannabis 3.0% (n = 5). By revealing drugs and metabolites beyond the ordinary scope, the present procedure helps the pediatrician in cases where maternal denial is strong but the infant seems to suffer from typical drug-withdrawal symptoms. Intrapartum drug administration cannot be differentiated from gestational drug use by meconium analysis, which affects the interpretation of oxycodone, tramadol, fentanyl, pethidine, and ephedrine findings.