Synthesis and photochemical property of polymers with pendant donor–acceptor-type norbornadiene moieties

The donor–acceptor-type norbornadiene (D–A NBD) 1,4,5,6-tetramethyl-3-phenyl-2,5-NBD-2-carboxylic acid was prepared by the Diels–Alder reaction of methyl 3-phenylprop-2-ynoate with 1,2,3,4-tetramethyl-1,3-cyclopentadiene. 1,4,5,6,7-Pentamethyl-3-phenyl-2,5-NBD-2-carboxylic acid was also synthesized in the same way. Styrene-type polymers with pendant D–A NBD moieties were prepared with a 100% degree of substitution (DS) by the reaction of D–A NBD carboxylic acids with poly[(p-chloromethyl)styrene] with 1,8-diazabicyclo[5.4.0]undecene-7 in dimethyl sulfoxide at 70 °C for 6 h. In the reaction of D–A NBD carboxylic acids with poly(2-chloroethyl vinyl ether), the DSs were about 60%. The photochemical valence isomerizations of all the NBD polymers proceeded smoothly with UV irradiation in tetrahydrofuran solutions and in the film state. In addition, the rate of the photochemical reaction of the NBD polymers increased efficiently by the addition of 4,4′-bis(diethylamino)benzophenone as a photosensitizer in a film state. The stored thermal energy of the irradiated polymers was also evaluated by differential scanning calorimetry to be 55–74 kJ/mol. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1764–1773, 2001     

One-Pot Synthesis of Biologically Important Spiro-2-amino-4H-pyrans,Spiroacenaphthylenes, and Spirooxindoles Using DBU as a Green and Recyclable Catalyst in Aqueous Medium

We have reported DBU-catalyzed one-pot synthesis of biologically and pharmacologically important spiropyrans from condensation of malononitrile/ethyl cyanoacetate, 1,3-dicarbonyl compounds, and ninhydrin/acenaphthequinone/istain in good yields. This new protocol employing DBU, which is a green, recyclable, and inexpensive catalyst, offers advantages such as mild reaction conditions, short reaction times, and easy isolation of products. The structures have been confirmed by x-ray analysis.

[Supplementary materials are available for this article. Go to the publisher's online edition of Synthetic Communications® for the following free supplemental resource(s): Full experimental and spectral details.]     

Synthesis of poly(2-cyclohexenone-4-yl methacrylate) and acidolysis of pendant protecting groups in the polymer

4-Acetoxy-2-cyclohexenone (ACH) and 2-cyclohexenone-4-yl methacrylate (CHM) were obtained from the condensation reaction of 4-bromo-2-cyclohexenone (BCH) with acetic acid and methacrylic acid using 1,8-diazabicyclo-[5,4,0]-7-undecene (DBU), respectively. Poly(2-cyclohexenone-4-yl methacrylate) ( P-1 ) containing acid-sensitive 2-cyclohexenone-4-yl group was prepared from the radical polymerization of CHM and the esterification of poly(methacrylic acid) with BCH using DBU. Furthermore, P-1 and CHM copolymers ( P-2 and P-3 ) were easily synthesized from the radical polymerization of methacrylic acid and comonomers in dimethylsulfoxide using 1 mol % of 2,2′-azobis (isobutyronitrile) followed by esterification of the resulting polymers with BCH using DBU by one-pot method. The deprotection reaction of ACH and P-1 was carried out in dichloromethane using an acid catalyst. The reaction proceeded smoothly in solution to give phenol and the corresponding carboxylic acid. Therefore, the 2-cyclohexenone-4-yl group is a useful protecting group for carboxylic acids, because the protection and deprotection reactions are very easy. In the case of polymer films, however, the acid was trapped by carbonyl group on the 2-cyclohexenone-4-yl group, and did not cause the deprotection reaction. © 1993 John Wiley & Sons, Inc.     

Synthesis and properties of aromatic poly(ester amide)s with pendant phosphorus groups

Two series of phosphorus‐containing aromatic poly(ester amide)s with inherent viscosities of 0.46–3.20 dL/g were prepared by low‐temperature solution polycondensation from 1,4‐bis(3‐aminobenzoyloxy)‐2‐(6‐oxido‐6H‐dibenz〈c,e〉〈1,2〉oxaphosphorin‐6‐yl)naphthalene and 1,4‐bis(4‐aminobenzoyloxy)‐2‐(6‐oxido‐6H‐dibenz〈c,e〉〈1,2〉oxaphosphorin‐6‐yl)naphthalene with various aromatic diacid chlorides. All the poly(ester amide)s were amorphous and readily soluble in many organic solvents, such as N,N‐dimethylformamide, N,N‐dimethylacetamide (DMAc), and N‐methyl‐2‐pyrrolidone (NMP). Transparent, tough, and flexible films of these polymers were cast from DMAc and NMP solutions. Their casting films had tensile strengths of 71–214 MPa, elongations to break of 5–10%, and initial moduli of 2.3–6.0 GPa. These poly(ester amide)s had glass‐transition temperatures of 209–239 °C (m‐series) and 222–267 °C (p‐series). The degradation temperatures at 10% weight loss in nitrogen for these polymers ranged from 462 to 489 °C, and the char yields at 800 °C were 55–63%. Most of the poly(ester amide)s also showed a high char yield of 35–45%, even at 800 °C under a flow of air. The limited oxygen indices of these poly(ester amide)s were 35–46. © 2002 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 459–470, 2002; DOI 10.1002/pola.10129     

DBU: a highly efficient catalyst for one-pot synthesis of substituted 3,4-dihydropyrano[3,2-c]chromenes, dihydropyrano[4,3-b]pyranes, 2-amino-4H-benzo[h]chromenes and 2-amino-4H benzo[g]chromenes in aqueous medium

We have reported DBU catalyzed one-pot synthesis of 3,4-dihydropyrano[3,2-c]chromenes, dihydropyrano[4,3-b]pyranes, 2-amino-4H-benzo[h]chromenes and 2-amino-4H-benzo[g]chromenes from aldehydes, active methylene compounds malononitrile/ethyl cyanocacetate, and 4-hydroxycoumarin/4-hydroxy-6-methylpyrone/1-naphthol/2-hydroxynaphthalene-1,4-dione in water under reflux. The attractive features of this process are mild reaction conditions, reusability of the reaction media, short reaction times, easy isolation of products, and excellent yields.     

Synthesis of polymers in aqueous solutions: Synthesis of polysulfide by reaction of bis(4‐mercaptophenyl) sulfide with bis(4‐chloro‐3‐nitrophenyl) sulfone using various bases in aqueous solutions

The polycondensation of bis(4‐mercaptophenyl) sulfide (BMPS) with bis(4‐chloro‐3‐nitrophenyl) sulfone (BCNPS) was examined using various organic or inorganic bases in mixed solvents of N‐methyl‐2‐pyrrolidone (NMP) with water or in plain water. The reaction of BMPS with BCNPS proceeded smoothly to give the corresponding polysulfide in mixed solvents of NMP with water at 60 °C using 1,8‐diazabicyclo[5.4.0]undecene‐7 as a base, although the rate of the reaction decreased gradually as the water in the solvent increased. Polysulfide can also be obtained by reaction in plain water using appropriate organic bases such as tripropylamine (TPA) or quinoline. The polysulfide with a number‐average molecular weight of 45,100 was synthesized in 62% yield when the reaction of BMPS with BCNPS was performed using TPA as a base at 60 °C for 48 h in plain water. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3399–3404, 2000     

Synthesis and properties of novel soluble poly(amide‐imide)s with different pendant substituents

Two types of novel fluorinated diimide‐diacid monomers—[2,2′‐(4,4′‐(3′‐methylbiphenyl‐2,5‐diyl)bis(oxy)bis(3‐(trifluoromethyl)‐4,1‐phenylene))bis(1,3‐dioxoisoindoline‐5‐carboxylic acid)] (III) and [2,2′‐(4,4′‐(3′‐(trifluoromethyl)biphenyl‐2,5‐diyl)bis(oxy)bis(3‐(trifluoromethyl)‐4,1‐phenylene))bis(1,3‐dioxoisoindoline‐5‐carboxylic acid)] (IV)—were respectively designed and prepared by the condensation of diamines I and II with two molar equivalents of trimellitic anhydride. From both diimide‐diacids, two series of novel poly(amide‐imide)s (PAIs) (IIIa–IIIe and IVa–IVe) bearing different pendant groups were prepared by direct polymerization with various aromatic diamines (a–e). All the PAIs had a high glass transition temperatures (T_gs, 232–265 °C), excellent thermal stability (exhibiting only 5% weight loss at 493–542 °C under nitrogen) and good solubility in various organic solvents due to the introduction of the bulky pendant groups. The cast films of these PAIs (80–90 μm) had good optical transparency (73–81% at 450 nm, 85–88% at 550 nm and 87–89% at 800 nm) and low dielectric constants (2.65–2.98 at 1 MHz). The spin‐coated films of these PAIs presented a minimum birefringence value as low as 0.0077–0.0143 at 650 nm and low optical absorption at the near‐infrared optical communication wavelengths of 1310 and 1550 nm. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3243–3252     

Synthesis and characteristics of polydepsipeptide with pendant thiol groups

To obtain water-soluble oligodepsipeptide with pendant thiol groups, the alternating co-oligomer [oligo(Glc-alt-Cys)], consisting of glycolic acid (Glc) and L -cysteine (Cys) residues as α-hydroxy acid and α-amino acid residues, respectively, was prepared by means of ring-opening homo-oligomerization of cyclo[Glc-Cys(MBzl)] and subsequent deprotection of methoxybenzyl groups. Moreover, to modify the properties of poly(lactic acid) [poly(LA)] and to introduce pendant thiol groups to poly(LA), the terpolymer of LA, Glc, and Cys {poly[LA-(Glc-Cys)]} was synthesized through ring-opening and copolymerization of L -lactide with the protected cyclodepsipeptide, cyclo[Glc-Cys(MBzl)] and subsequent deprotection of methoxybenzyl groups. By changing the mol fraction of (Glc-Cys) unit, the solubility, thermal transition, degradation behavior of the modified poly(LA), and the water contact angle of its film could be varied. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1283–1290, 1998     

One‐Pot synthesis of functional poly(methacrylate) by ATRP and 1,8‐Diazacyclo‐[5,4,0]undec‐7‐ene catalyzed transesterification

A facile one‐pot 1,8‐diazacyclo‐[5,4,0]undec‐7‐ene (DBU) catalyzed transesterification/atom transfer radical polymerization (ATRP) strategy has been successfully developed through the combination of copper/DBU‐catalyzed ATRP and DBU‐catalyzed transesterification reactions. Well‐defined poly(methacrylate)s with various side ester groups have been synthesized by ATRP and transesterification of acyl donor 2,2,2‐trifluoethyl methacrylate with various alcohols, such as benzyl alcohol, n‐butanol, iso‐propyl alcohol, methanol, triethylene glycol monomethyl ether, propargyl alcohol, and 6‐azido‐1‐hexanol by the one‐pot process. Kinetic studies indicate that the ATRP process proceeded in a controllable manner without the interference of the transesterification reactions. Expansion of the binary system to a higher level ternary system has been successfully achieved by the combination of copper(I)‐catalyzed azide–alkyne cycloaddition, transesterification, and ATRP reactions. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2998–3003     

Synthesis of methallylic monomers bearing ammonium side‐groups and their radical copolymerization with chlorotrifluoroethylene

Methallylic monomers bearing triethyl or 4‐diazabicyclo[2.2.2]octane (DABCO) ammonium side‐groups are prepared and copolymerized with chlorotrifluoroethylene (CTFE). First, three different monomers are synthesized from chloro‐2‐methylprop‐1‐ene or 3‐chloro‐2‐chloromethylprop‐1‐ene in fair to good yields (57–95%). Then, several parameters (initiators, aqueous or solution processes, temperature) of the radical copolymerization of these monomers with chlorotrifluoroethylene are investigated. Various initiators are tested in the presence of ammonium perfluorooctanoate (APFO) as water‐soluble surfactant, and tert‐butyl peroxypivalate/APFO leads to the best results in a mixed solvent (H₂O/CH₃CN/C₄F₅H₅). In all experiments, the radical copolymerization shows that CTFE is more reactive than the methallylic monomer as evidenced by the characterization of poly(CTFE‐co‐M) copolymer by nuclear magnetic resonance spectroscopy and elemental analysis. Thermal degradation of these copolymers by thermogravimetric analyses indicates that the copolymers are stable up to 180 °C without any degradation and have a T_d,10% above 300 °C. Finally, their ionic exchange capacities range between 0.94 and 1.69 meq g^?1. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1721–1729     

Synthesis and enzymatic hydrolysis of lactic acid–depsipeptide copolymers with functionalized pendant groups

Since poly(lactic acid) is the biodegradable polyester having low immunogenicity and good biocompatibility, it is utilized as a medical material. However, poly(lactic acid) is a water-insoluble crystalline polymer having no reactive side-chain group. Thus, the use of poly(lactic acid) is limited. To modify the properties of poly(lactic acid) and to introduce the functionalized pendant groups to poly(lactic acid), we synthesized two kinds of lactic acid-depsipeptide copolymers with reactive pendant groups, namely poly[LA-(Glc-Lys)] and poly[LA-(Glc-Asp)]. This was done through ring-opening copolymerizations of L-lactide with the corresponding protected cyclodepsipeptides, cyclo[Glc-Lys(Z)] and cyclo[Glc-Asp(OBzl)], and subsequent deprotection of benzyloxycarbonyl and benzyl groups, respectively. By changing the mole fraction of the corresponding depsipeptide units, the solubility, thermal transition and degradation behavior of the modified poly(lactic acid) could be varied. © 1997 John Wiley & Sons, Inc.     

Synthesis of polymers in aqueous solutions: Esterification reaction of poly(methacrylic acid) with alkyl halides using DBU in aqueous solutions

A convenient esterification reaction of poly(methacrylic acid) (PMAA) with certain alkyl halides was performed using 1,8-diazabicyclo-[5.4.0]-7-undecene (DBU) as a base in aqueous solution or in water. The esterification reaction of PMAA with propargyl bromide (PB) proceeded very smoothly and quantitatively at 30°C to give corresponding poly(propargyl methacrylate), although the rate of the reaction decreased with increasing water. The reaction of PMAA with benzyl bromide, o-nitrobenzyl bromide, and p-nitrobenzyl bromide gave corresponding poly(methacrylic ester) using DBU under suitable reaction conditions in water. The esterification reactions of PMAA with PB were carried out using certain organic bases such as triethylamine, 4(N,N-dimethylamino)pyridine and pyridine. Inorganic bases such as sodium carbonate, sodium hydroxide, potassium carbonate, and potassium hydroxide were also tried under the same conditions as with DBU. However, the degrees of estrification with all these bases was much lower than that with DBU. © 1996 John Wiley & Sons, Inc.     

Synthesis and properties of widely conjugated polyacetylenes having anthryl and phenanthryl pendant groups

The metathesis polymerization of 1- and 2-ethynylanthracenes (1-EA and 2-EA) and 2- and 3-ethynylphenanthrenes (2-EP and 3-EP) in the presence of various WCl₆-based catalysts produced widely conjugated soluble polymers with relatively high molecular weights. The highest weight-average molecular weights of poly(1-EA) and poly(2-EA) reached 61,000 and 26,000, respectively, when Ph₄Sn was used as cocatalyst, while those of poly(2-EP) and poly(3-EP) reached 23,000 and 65,000, respectively, with Ph₃Bi as cocatalyst. In contrast, MoCl₅-based catalysts were hardly or not effective for these monomers. A large red-shifted peak was observed centering at 570 nm (the cutoff at 750 nm) in the absorption spectrum of poly(1-EA), while the red-shifted peaks were seen around 500 nm (the cutoffs near 700 nm) in the spectra of other polymers, indicating wide conjugations of the polymer chains. The configurational structures of all the polymers confirmed by DSC and ¹H-NMR were trans structures. However, poly(1-EA) and poly(3-EP) appeared to consist partly of cis structures in their main chains. All of the present polymers showed relatively high thermal stability in air compared with poly(phenylacetylene). © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 3131–3137, 1998     

Synthesis and characterization of novel semiaromatic copolyamides bearing both polar hydroxyl and unsaturated allyl substituents

A series of novel semiaromatic (co)polyamides, poly(octylene terephthalamide)-ran-poly[octylene 2,5-bis(allyloxy)terephthalamide] (APA8T-x, x represents the molar fraction of allyloxy containing structure unit), were prepared via the interfacial polymerization of 1,8-diaminooctane, terephthaloyl chloride, and 2,5-bis(allyloxy)terephthaloyl chloride. The polymerization conditions were optimized in terms of the yields and the molecular weights of the resultant polymers. These polymers were converted to the target macromolecules, poly(octylene terephthalamide)-ran-poly[octylene (2,5-dihydroxy-3,6-diallyl)terephthalamide] (CRPA8T-x), through solid state Claisen rearrangement reaction, as characterized by ¹H NMR and FT-IR spectroscopies. While APA8T-x was only soluble in very limited solvents, the solubility of CRPA8T-x in polar solvents improved remarkably, especially for those with high counit content. Due to the polarity of hydroxyl group, CRPA8T-x showed an improved hydrophilicity than APA8T-x. The treatment of aramid fibers with CRPA8T-x, as sizing agents, enhanced obviously their interfacial adhesion toward epoxy resin. The fibers sized with 0.5 wt% CRPA8T-75 solution in the mixture of 1,1,2,2-tetrachloroethane and phenol (40:60, w/w) exhibited a maximum increase of 60% in interfacial shear strength than the naked fibers. The easy preparation and the facility for the further modification through the dual functional substituents may greatly widen the application of semiaromatic polyamides. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 690–698     

Synthesis,characterization, and thermal and dielectric properties of three different methacrylate polymers with zwitterionic pendant groups

The synthesis, characterization, thermal, and dielectric properties of three different zwitterionic methacrylates of the sulfobetaine type are presented. Diethylamine-ethyl-, 2-(diethylaminoethoxy)-ethyl-, and 2-(2-diethylaminoethoxy) ethoxy-ethyl-methacrylates were made to react with butanosultone to prepare monomers with variable flexibility. The flexibility of the lateral chain of the polymethacrylates decreased the glass transition temperature (T_g down to 300 K) of the polymers. A linear relationship between T_g and the number of carbon atoms was shown for these materials. X-ray diffraction and DSC experiments showed the formation of new ordered phases in these polymers, which inhibited their dipole conductivity. On heating, these phases were destroyed and values of conductivity of 10⁻⁷–10⁻³ S cm⁻¹ were obtained in the studied range of temperature. Variation of conductivity with temperature was established according to the Arrhenius equation. Dielectric properties exhibited a small deviation of the Debye type behavior, and β parameters of the Cole–Cole equations were calculated for the synthesized polymers. © 1997 John Wiley & Sons, Inc.     

Synthesis and properties of poly(arylene ether)s bearing sulfonic acid groups on pendant phenyl rings

Two kinds of new aromatic poly(arylene ether)s containing sulfonic acid groups were synthesized. Polymer 1 composed of tetraphenylphenylene ether and perfluorobiphenylene units was sulfonated with chlorosulfonic acid. Sulfonation took place only at the para position of the pendant phenyl rings. The average degree of sulfonation per repeating unit (m) was controlled from 1 to 4. Sulfonated polymer 2 with m = 3 was soluble in methanol and dimethyl sulfoxide and swelled in water. Incorporating bis(3,5‐dimethylphenyl)sulfone moieties into the sulfonated polymer imparts less methanol affinity. Polymers 4 with 30–65 mol % tetrakis(sulfophenyl)phenylene ether units has high decomposition temperatures above 300 °C, hydrophilicity, and good hydrolytic stability. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3211–3217, 2001     

Synthesis and properties of a soluble and widely conjugated polyacetylene with anthryl pendant

The metathesis polymerization of an anthrylacetylene bearing an alkyl ester group, 9‐(10‐hexoxycarbonyl)anthrylacetylene ( 1 ), was conducted with various transition‐metal catalysts. A completely soluble black polymer was obtained from 1 in a good yield when W‐based catalysts were employed. The polymerization at a high monomer concentration (1 M) and a high temperature (80 °C) led to the formation of poly( 1 ) with a weight‐average molecular weight of 297 × 10³ in an 80% yield. The use of cocatalysts unexpectedly decreased both the yield and molecular weight of poly( 1 ). Rh‐catalyzed and Mo‐catalyzed polymerizations, however, resulted in poor yields of the polymer. The ultraviolet–visible spectrum of poly( 1 ) showed a significantly redshifted absorption (λ_max = 571) with a cutoff at 780 nm, which verified the very high order of conjugation of the main chain. Poly( 1 ) exhibited the largest third‐order nonlinear optical susceptibility [χ⁽³⁾ (−ω; ω, 0, 0) = − 1.9 × 10⁻¹⁰ esu] among the polymers from the monosubstituted polyacetylenes synthesized so far. The electrical conductivity of poly( 1 ) in an I₂‐doped state was 8.77 × 10⁻⁴ at 293 K. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4717–4723, 2000     

Synthesis and characterization of novel aromatic polyamides with polyalicyclic cardo groups

5,5-Bis[4-(4-carboxyphenoxy)phenyl]hexahydro-4,7-methanoindan ( 3a ) and 5,5-bis[4-(4-aminophenoxy)phenyl]hexahydro-4,7-methanoindan ( 3b ) were prepared in two main steps starting from the aromatic nucleophilic halogen-displacement of p-fluorobenzonitrile and p-chloronitrobenzene, respectively, with 5,5-bis(4-hydroxyphenyl)hexahydro-4,7-methanoindan in the presence of potassium carbonate in N,N-dimethylformamide (DMF). Using triphenyl phosphite and pyridine as condensing agents, two series of polyamides having polyalicyclic cardo units were directly polycondensated from dicarboxylic acid 3a with various aromatic diamines, or from diamine 3b with various aromatic dicarboxylic acids in the N-methyl-2-pyrrolidone (NMP) solution containing dissolved calcium chloride. High molecular weight polyamides with inherent viscosities between 0.73 and 1.44 dL/g were obtained. All polymers were readily soluble in polar aprotic solvents such as NMP and N,N-dimethylacetamide (DMAc) and afforded transparent, flexible, and tough films by solution casting. The glass-transition temperatures (T_g) of these aromatic polyamides were in the range of 219–253°C by DSC, and the 10% weight loss temperatures in nitrogen and air were above 467 and 465°C, respectively. A comparative study of some polyamides with an isomeric repeat unit is also presented. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4510–4520, 1999     

Synthesis of oligomeric silsesquioxanes functionalized with (β-carboxyl)ester groups and their use as modifiers of epoxy networks

A silsesquioxane functionalized with (β-carboxyl)ester groups was synthesized by reacting a silsesquioxane functionalized with secondary hydroxyls with a stoichiometric amount of an acid anhydride. The reaction could be carried out to completion as shown by FTIR spectra and SEC chromatograms. The carboxyl-functionalized silsesquioxane was composed of polyhedra with 8-11 Si atoms, containing two (β-carboxyl)ester groups per organic branch (from 16 to 22 carboxyl groups per molecule). It was a stable glassy product at room temperature and could be dissolved in a variety of organic solvents. It was used as a modifier of epoxy networks based on diglycidylether of bisphenol A (DGEBA) cured with 4-(dimethylamino)pyridine (DMAP). A complete reaction of epoxy groups was observed in a higher temperature range than in the formulation devoid of the functionalized silsesquioxane. This was explained by the reversible complexation of the tertiary amine with (β-carboxyl)ester groups. The addition of the silsesquioxane produced a decrease in the crosslink density explained by the presence of transesterification and chain transfer reactions, and a maximum in the elastic modulus measured at room temperature, explained by a combination of variations of cohesive energy density and the magnitude of β-relaxations.     

Synthesis and properties of novel polymers having S-methyldibenzothiophenium salt moieties

A polymer having dibenzothiophenium salt moieties [poly(sulfonium salt), 2 ] was prepared by the reaction of poly(2-vinyldibenzothiophene) ( 1 ) with CH₃I and AgBF₄ in CH₂ClCH₂Cl at room temperature for 24 h. The obtained polymer 2 was found to contain 71% of the methyldibenzothiophenium tetrafluoroborate unit. A monomer carrying the sulfonium salt moiety, i.e., 5-methyl-2-vinyldibenzothiophenium tetrafluoroborate ( 4 ), was independently prepared and subjected to radical polymerization to give a polymer ( 5 ) in 88% yield (methyldibenzothiophenium tetrafluoroborate unit: 79%). The thermal decompositions of 2 and 5 took place in two steps; the first step involved the formation of polymer 1 by demethylation. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1779–1784, 1998