首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 109 毫秒
1.
Five‐member cyclic dithiocarbonates were synthesized by the reactions of carbon disulfide with benzoic, p‐anisic, p‐chlorobenzoic, 1‐naphthalenecarboxylic, p‐nitrobenzoic, and p‐(tert‐butyl)benzoic glycidyl esters, and their cationic ring‐opening polymerizations were carried out with methyl trifluoromethane sulfonate and trifluoromethane sulfonic acid as initiators at room temperature to 80 °C. Polymers with number‐average molecular weights of 3400–24,900 were obtained in high yields, and their structures were estimated by NMR and IR spectroscopy. The monomers showed a clear difference in the polymerization rate according to the substituents. The rate of polymerization decreased in the order of p‐chlorobenzoic ≥ benzoic > 1‐naphthalenecarboxylic > p‐nitro‐benzoic > ptert‐butylbenzoic > p‐anisic. The data of the reaction kinetics, NMR studies, and molecular orbital calculations proved a plausible mechanism involving the participation of p‐substituted benzoyloxymethyl groups to stabilize the cationic propagating end. The polymers showed decomposition temperatures with 5% weight loss ranging from 200 to 260 °C. No glass‐transition temperatures for the polymers were observed below 200 °C by differential scanning calorimetry. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3967–3980, 2001  相似文献   

2.
The use of dormant species has opened a new era in precision polymerization and has changed the concept of living polymerization. The dormant species can be exchanged into the active species via reversible termination or via reversible chain transfer. Professor Mitsuo Sawamoto has greatly contributed to the establishment of the concepts of living cationic and radical polymerizations based on the reversible activation of dormant species. This highlight, dedicated to Professor Sawamoto on his retirement from Kyoto University, provides an overview of reversible or degenerative chain‐transfer (DT) processes, which are effective in controlling all chain‐growth polymerizations, including radical, cationic, anionic, coordination, ring‐opening metathesis, and ring‐opening polymerizations. In addition, structures with novel sequences accessible only by a combination of different propagating species with a common DT agent are reviewed. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 243–254  相似文献   

3.
A kinetic model has been developed for reversible addition–fragmentation transfer (RAFT) polymerization with the method of moments. The model predicts the monomer conversion, number‐average molecular weight, and polydispersity of the molecular weight distribution. It also provides detailed information about the development of various types of chain species during polymerization, including propagating radical chains, adduct radical chains, dormant chains, and three types of dead chains. The effects of the RAFT agent concentration and the rate constants of the initiator decomposition, radical addition, fragmentation, disproportionation, and recombination termination of propagating radicals and cross‐termination between propagating and adduct radicals on the kinetics and polymer chain properties are examined with the model. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1553–1566, 2003  相似文献   

4.
In this work, zero‐valent iron (Fe(0)) (powder or wire) and elemental bromine (Br2) were used as the catalysts for atom transfer radical polymerization (ATRP) of styrene (St) without any additional initiator at 110 °C. The polymerizations happened with controlled evidence at appropriate molar ratio of Fe(0) to Br2: a remarkable increase of molecular weights with St conversions, the narrow molecular weight distributions and living polymer chains end‐capped by Br. More Br2 or less Fe(0) led to a slow polymerization rate but an improved control over molecular weights. After examining the polymer chain ends by matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry, it was concluded that the polymerization was initiated by thermal self‐initiation, and regulated by the in situ generated FeIIIBr3. The results suggested that the Fe(0)/Br2 catalyzing polymerization was a classical ATRP process with easier operation and more economical components. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012  相似文献   

5.
The substituent effect on the radical polymerization of o‐quinodimethanes, generated by thermal isomerization of benzocyclobutenes, was investigated. Polymerizations of three benzocyclobutenes bearing electron‐withdrawing groups were studied, namely 1‐cyanobenzocyclobutene (1), 1‐chlorobenzocyclobutene (2), and 1‐bromobenzocyclobutene (3). While radical polymerizations of 2 and 3 did not afford any polymer, radical polymerization of 1 afforded n‐hexane‐insoluble polymer(Mn = 5000) in moderate yields at temperatures above 120°C. The structure of the obtained polymer was confirmed to be a ring‐opened polymer(4) by IR, 1H‐, and 13C‐NMR. The yield of the polymer increased with an increase in the initiator concentration. The polymer yield reported in this paper is higher than those of benzocyclobutenes bearing electron‐donating groups, reported previously by the authors. The semi‐empirical molecular orbital calculation supported the contribution of ring‐opening polymerization of spiro‐compounds, rejecting the possibility of 1,4‐polymerization. Lastly, radical copolymerizations of 1 with various comonomers were also performed to obtain the corresponding copolymers. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1555–1563, 1999  相似文献   

6.
The radical ring‐opening copolymerization of 2‐isopropenyl‐3‐phenyloxirane (1) with styrene (St) was examined to obtain the copolymer [copoly(1‐St)] with a vinyl ether moiety in the main chain. The copolymers were obtained in moderate yields by copolymerization in various feed ratios of 1 and St over 120 °C; the number‐average molecular weights (Mn) were estimated to be 1800–4200 by gel permeation chromatography analysis. The ratio of the vinyl ether and St units of copoly(1‐St) was estimated with the 1H NMR spectra and varied from 1/7 to 1/14 according to the initial feed ratio of 1 and St. The haloalkoxylation of copoly(1‐St) with ethylene glycol in the presence of N‐chlorosuccinimide produced a new copolymer with alcohol groups and chlorine atoms in the side group in a high yield. The Mn value of the haloalkoxylated polymer was almost the same as that of the starting copoly(1‐St). The incorporated halogen was determined by elemental analysis. The analytical result indicated that over 88% of the vinyl ether groups participated in the haloalkoxylation. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3729–3735, 2000  相似文献   

7.
Formaldehyde oxime and three O‐alkyl derivatives were examined as potential imine monomers. Formaldehyde oxime spontaneously polymerized below 60 °C and did not polymerize above 60 °C (ceiling temperature), even in the presence of free‐radical or cationic initiators. The O‐benzoyl derivative was isolated as the cyclic trimer but could not be converted into the monomeric form. Formaldehyde O‐benzyloxime was synthesized and isolated. Attempted homopolymerizations in the presence of free‐radical initiators only led to oligomers, whereas with cationic initiators only cyclic trimer was obtained. Copolymerizations with appropriate vinyl monomers and free‐radical and anionic initiators yielded only low molecular weight polymers. Cationic copolymerizations gave higher molecular weights and polymer yields, but the polymers containing appreciable amounts of imine function had very low molecular weights. We conclude that the polymerizability of imines is extremely sensitive to the substitution pattern: imines with only a substituent on nitrogen are unstable and readily polymerize, whereas imines with more substituents generally do not polymerize. Electron‐withdrawing substituents are more favorable to polymerizability. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1866–1872, 2000  相似文献   

8.
A styrene‐based monomer having a five‐membered cyclic dithiocarbonate structure, 4‐vinylbenzyl 1,3‐oxathiolane‐2‐thione‐5‐ylmethyl ether (VBTE), was synthesized from 4‐vinylbenzyl glycidyl ether (VBGE) and carbon disulfide in the presence of lithium bromide in 86% yield. Radical polymerization of VBTE in dimethyl sulfoxide by 2,2′‐azobisisobutyronitrile was carried out at 60 °C to afford the corresponding the polymer, polyVBTE, in 64% yield. PolyVBTE with number‐averaged molecular weight higher than 31,000 was obtained. The glass transition temperature (Tg) and 5 wt % decomposition temperature (Td5) of the polyVBTE were evaluated to be 66 and 264 °C under nitrogen atmosphere by differential scanning calorimetry and thermal gravimetry analysis, respectively. It was confirmed that a polymer consisting of the same VBTE repeating unit could also be obtained via polymer reaction, that is, a lithium bromide‐catalyzed addition of carbon disulfide to a polyVBGE prepared from a radical polymerization of VBGE. Copolymerization of VBTE and styrene with various compositions efficiently gave copolymers of VBTE and styrene. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013  相似文献   

9.
The living radical polymerization of methyl methacrylate and styrene was successfully carried out with diethyl 2,3‐dicyano‐2,3‐diphenylsuccinate (DCDPS)/ferric tri(diethyldithiocarbamate) as a novel reverse atom transfer radical polymerization initiation system in which DCDPS was a hexa‐substituted ethane‐type thermal iniferter, DC was a diethyldithiocarbamate group, and no additional ligands such as nitrogen‐ or phosphine‐based compounds were required. The bulk polymerization of methyl methacrylate was carried out at 95 °C, and that of styrene was carried out at 120 °C. Poly(methyl methacrylate) and polystyrene (PSt) with high molecular weights and quite narrow molecular weight distributions (as low as 1.09 for PSt) were obtained. 1H NMR spectroscopy revealed the presence of an α‐(carbethoxycyanophenyl)methyl group from the initiator and an ω‐DC group from the catalyst in the obtained polymers. Various chain‐extension reactions under UV light or thermal treatments were successfully conducted to prove the presence and efficient reinitiating of the ω‐DC group. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3464–3473, 2001  相似文献   

10.
The anionic ring‐opening polymerization of oxetanes containing hydroxyl groups was carried out with potassium tert‐butoxide as an initiator in the presence of 18‐crown‐6‐ether in N‐methylpyrrolidinone at 180 °C; it yielded corresponding multifunctional hyperbranched polymers: poly(3‐ethyl‐3‐hydroxymethyloxetane)s, with number‐average molecular weights of 2200–4100 in 83–95% yields, and poly(3‐methyl‐3‐hydroxymethyloxetane)s, with number‐average molecular weights of 4600–5200 in 70–95% yields. The synthesized poly(3‐ethyl‐3‐hydroxymethyloxetane)s and poly(3‐methyl‐3‐hydroxymethyloxetane)s were hyperbranched polyethers containing an oxetane moiety and many hydroxy groups at the ends. The postpolymerization of poly(3‐ethyl‐3‐hydroxymethyloxetane)s was performed in the presence of potassium tert‐butoxide and 18‐crown‐6‐ether in N‐methylpyrrolidinone at 180 °C; it yielded corresponding polymers with higher molecular weights in good yields. The cationic polymerization of poly(3‐ethyl‐3‐hydroxymethyloxetane) derivatives was carried out with boron trifluoride etherate as an initiator and was followed by alkaline hydrolysis; this yielded a new branched polymer, a poly(hyperbranched polyether), with many pendant hydroxy groups. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3739–3750, 2004  相似文献   

11.
The reaction of phenyl propynyl ether and diphenyl disulfide in the presence of 1 mol % tetrakis(triphenylphosphine)palladium as a model reaction of the polymerization of bis(4‐prop‐2‐ynyloxyphenyl) disulfide ( 1a ) gave a Z‐substituted dithioalkene. No E‐substituted dithioalkene was formed in this reaction. The palladium‐catalyzed bisthiolation polymerization of a diethynyl disulfide derivative, 1a , in benzene, was carried out to give a hyperbranched polymer ( 5a ) containing a Z‐substituted dithioalkene unit after reaction for 4 h at 70 °C. From the gel permeation chromatography analysis (chloroform, PSt standards), the number‐average and weight‐average molecular weights of 5a were found to be 8,100 and 57,000, respectively. The structure of 5a was confirmed by 1H and 13C NMR spectra. The obtained polymer was soluble in common organic solvents such as benzene, acetone, and CHCl3. Polymerization for more than 5 h gave insoluble products. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3580–3587, 2007  相似文献   

12.
In this study, new nitroxides based on the 2,2,5‐trimethyl‐4‐phenyl‐3‐azahexane‐3‐oxy skeleton were used to examine chain‐end control during the preparation of polystyrene and poly(t‐butyl acrylate) under living free‐radical conditions. Alkoxyamine‐based initiators with a chromophore attached to either the initiating fragment or the mediating nitroxide fragment were prepared, and the extent of the incorporation of the chromophores at either the initiating end or the propagating chain end was determined. In contrast to 2,2,6,6‐tetramethyl piperidinoxy (TEMPO), the incorporation of the initiating and terminating fragment into the polymer chain was extremely high. For both poly(t‐butyl acrylate) and polystyrene with molecular weights less than or equal to 70,000, incorporations at the initiating end of greater than 97% were observed. At the terminating chain end, incorporations of greater than 95% were obtained for molecular weights less than or equal to 50,000. The level of incorporation tended to decrease slightly at higher molecular weights because of the loss of the alkoxyamine propagating unit, which had important consequences for block copolymer formation. These results clearly show that these new α‐H nitroxides could control the polymerization of vinyl monomers such as styrene and t‐butyl acrylate to an extremely high degree, comparable to anionic and atom transfer radical polymerization procedures. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4749–4763, 2000  相似文献   

13.
The synthesis of a three‐armed polymer with an isocyanurate–thiourethane core structure is described. Monofunctional reversible addition–fragmentation chain transfer (RAFT) agent 2 and trifunctional RAFT agent 5 were prepared from mercapto‐thiourethane and tris(mercapto‐thiourethane), which were obtained from the aminolysis of mono‐ and trifunctional five‐membered cyclic dithiocarbonates, respectively. The radical polymerization of styrene in the presence of 2,2′‐azobis(isobutyronitrile) and RAFT agent 2 in bulk at 60 °C proceeded in a controlled fashion to afford the corresponding polystyrene with desired molecular weights (number‐average molecular weight = 3000–10,100) and narrow molecular weight distributions (weight‐average molecular weight/number‐average molecular weight < 1.13). On the basis of the successful results with the monofunctional RAFT agents, three‐armed polystyrene with thiourethane–isocyanurate as the core structure could be obtained with trifunctional RAFT agent 5 in a similar manner. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5498–5505, 2005  相似文献   

14.
The precipitation polymerization of acrylic acid in supercritical carbon dioxide was studied in a continuous stirred tank reactor with 2,2′‐azobis(2,4‐dimethylvaleronitrile) as the free‐radical initiator. The reactor temperature was between 50 and 90 °C, the pressure was 207 bar, and the average residence time was between 12 and 40 min. The product polymer was a white, dry, fine powder that dissolved in water. A wide range of polymer molecular weights (5–200 kg/mol) was obtained. The effects of the operating variables on the polymerization rate and on the polymer molecular weight were evaluated. The observed kinetics suggested that polymerization took place in both the supercritical fluid and the precipitated polymer particles. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2546–2555, 2005  相似文献   

15.
An effective approach was presented for the synthesis of co‐cyclic(aromatic aliphatic disulfide) oligomers by catalytic oxidation of aromatic and aliphatic dithiols with oxygen in the presence of a copper‐amine catalyst. The aromatic dithiols can be 4,4′‐oxybis(benzenethiol), 4,4′‐diphenyl dithiol, 4,4′‐diphenylsulfone dithiol. The aliphatic dithiols can be 1,2‐ethanedithiol, 2,3‐butanedithiol, 1,6‐hexane dithiol. The co‐cyclic(aromatic aliphatic disulfide) oligomers were characterized by gradient HPLC, MALDI‐TOF‐MS, GPC, 1H‐NMR, TGA, and DSC techniques. The glass transition temperatures of these co‐cyclics ranged from ?11.3 to 56.6°C. In general, these co‐cyclic(aromatic aliphatic disulfide) oligomers are soluble in common organic solvents, such as CHCl3, THF, DMF, DMAc. These co‐cyclic oligomers readily underwent free radical ring‐opening polymerization in the melt at 180°C, producing linear, tough and high molecular weight poly(aromatic aliphatic disulfide)s. The glass transition temperatures of these polymers ranged from ?3.7 to 107.8°C that are higher than those of corresponding co‐cyclics. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

16.
The polymeric product spectrum generated in thioketone‐mediated free radical polymerization (TKMP) was analyzed via electrospray ionization mass spectrometry. Poly(n‐butyl acrylate) samples were synthesized in the presence of the (commercially available) thioketone 4,4‐bis(dimethylamino)thiobenzophenone under variable reaction conditions in toluene solution at 80 °C. To unambiguously assign the mass spectra, the samples are prepared under variation of the monomer (going from n‐butyl acrylate to ethyl acrylate) as well as by employing variable thermally decomposing initiators [i.e., 2,2′‐azoisobutyronitrile and azobis(cyclohexanecarbonitrile)]. In all mass spectra, significant amounts of the expected cross‐termination product, formed via bimolecular termination of propagating macroradicals with the dormant thioketone radical adduct (consisting of a propagating chain and the mediating thioketone) alongside conventional termination products can be identified. As the study was carried out on acrylate polymers, acrylate‐specific reaction products arising from intramolecular transfer reactions followed by β‐scission of the generated mid‐chain radicals are also identified in the mass spectra. In addition, a species congruent with the dormant thioketone radical adduct itself (oxidized to its cationic state) was identified. Products that could potentially be formed via a chain transfer mechanism cannot be identified. The results presented here thus support the earlier suggested TKMP mechanism involving a highly stabilized adduct radical which undergoes significant cross‐termination reactions. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1864–1876, 2009  相似文献   

17.
A series of selenium‐substituted carbonates, S,Se‐dibenzyl dithioselenocarbonate (DTSC), S,Se‐dibenzyl thiodiselenocarbonate (TDSC), and Se,Se‐dibenzyl triselenocarbonate (TSC), were synthesized and used as mediators in radical polymerization. The results indicate that these selenium‐substituted carbonates can control the polymerization of styrene (St) and methyl acrylate, as evidenced by the number‐average molecular weight that increased linearly with the monomer conversion, molecular weights that agreed well with the predicted values, and successful chain extensions. The treatment of the resultant polystyrene by hydrogen peroxide generated polymers with approximately half‐reduced molecular weights, and the absence of carbonate groups and vinyl double bond‐terminated chain ends. The polymerization with these selenium‐substituted carbonates was the same polymerization mechanism as their analogue, the widely used S,S‐dibenzyl trithiocarbonate. This work provided a flexible protocol to incorporate selenium into the polymer chain backbone. Specifically, the treatment of these polymers by oxidation produced “clickable” vinyl‐terminated chain ends, which provided possibilities for further functionalization, for example, via a thiol‐ene click reaction. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2606–2613  相似文献   

18.
Controlled radical polymerizations of N‐ethylmethylacrylamide (EMA) by atom transfer radical polymerization and reversible addition‐fragmentation chain transfer processes were investigated in detail for the first time, employing complementary characterization techniques including gel permeation chromatography, 1H NMR spectroscopy, and matrix‐assisted laser desorption ionization time‐of‐flight mass spectrometry. In both cases, relatively good control of the polymerization of EMA was achieved, as revealed by the linear evolution of molecular weights with monomer conversions and the low polydispersity of poly(N‐ethylmethylacrylamide) (PEMA). The thermal phase transitions of well‐defined PEMA homopolymers with polydispersities less than 1.2 and degrees of polymerization up to 320 in aqueous solution were determined by temperature‐dependent turbidity measurements. The obtained cloud points (CPs) vary in the range of 58–68 °C, exhibiting inverse molecular weight and polymer concentration dependences. Moreover, the presence of a carboxyl group instead of an alkyl one at the PEMA chain end can elevate its CP by ~3–4 °C. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 60–69, 2008  相似文献   

19.
The effects of radicals on silica surface, which were formed by γ‐ray irradiation, on the polymerization of vinyl monomers were investigated. It was found that the polymerization of styrene was remarkably retarded in the presence of γ‐ray‐irradiated silica above 60 °C, at which thermal polymerization of styrene is readily initiated. During the polymerization, a part of polystyrene formed was grafted onto the silica surface but percentage of grafting was very small. On the other hand, no retardation of the polymerization of styrene was observed in the presence of γ‐ray‐irradiated silica below 50 °C; the polymerization tends to accelerate and polystyrene was grafted onto the silica surface. Poly(vinyl acetate) and poly(methyl methacrylate) (MMA) were also grafted onto the surface during the polymerization in the presence of γ‐ray‐irradiated silica. The grafting of polymers onto the silica surface was confirmed by thermal decomposition GC‐MS. It was considered that at lower temperature, the grafting based on the propagation of polystyrene from surface radical (“grafting from” mechanism) preferentially proceeded. On the contrary, at higher temperature, the coupling reaction of propagating polymer radicals with surface radicals (“grafting onto” mechanism) proceeded to give relatively higher molecular weight polymer‐grafted silica. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2972–2979, 2006  相似文献   

20.
The radical polymerization behavior of 1‐cyano‐o‐quinodimethane generated by thermal isomerization of 1‐cyanobenzocyclobutene in the presence of 2,2,6,6‐tetramethylpiperidine‐N‐oxide (TEMPO) and the block copolymerization of the obtained polymer with styrene are described. The radical polymerization of 1‐cyanobenzocyclobutene was carried out in a sealed tube at temperatures ranging from 100 to 150 °C for 24 h in the presence of di‐tert‐butyl peroxide (DTBP) as a radical initiator and two equivalents of TEMPO as a trapping agent of the propagation end radical to obtain hexane‐insoluble polymer above 130 °C. Polymerization at 150 °C with 5 mol % of DTBP in the presence of TEMPO resulted in the polymer having a number‐average molecular weight (Mn ) of 2900 in 63% yield. The structure of the obtained polymer was confirmed as the ring‐opened polymer having a TEMPO unit at the terminal end by 1H NMR, 13C NMR, and IR analyses. Then, block copolymerization of the obtained polymer with styrene was carried out at 140 °C for 72 h to give the corresponding block copolymer in 82% yield, in which the unimodal GPC curve was shifted to a higher molecular weight region. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3434–3439, 2000  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号