Binary blends based on poly(vinyl chloride) and multi-block copolymers containing poly(ϵ-caprolactone) and poly(ethylene glycol) segments

Binary blends based on poly(vinyl chloride) (PVC) were prepared both by casting from tetrahydrofuran (THF) and by mixing in the melt form, in a discontinuous mixer, PVC and multi-block copolymers containing poly(ϵ-caprolactone) (PCDT) and poly(ethylene glycol) (PEG) segments. PCDT-PEG copolymers were synthesized using a polycondensation reaction where the α,ω-bis-chloroformate of an oligomeric poly(ϵ-caprolactone) diol terminated (PCDT) and oligomeric PEG were employed as macromonomers. For comparison purposes, blends PVC with starting oligomers as well as with mixtures containing a typical low molecular plasticizer, dioctylphthalate (DOP), were also prepared. The copolymer miscibility was studied by differential scanning calorimetry (DSC) and FT-IR spectroscopy. The blend morphology was investigated by polarized light microscopy (PLM). A higher miscibility with PVC was observed for copolymers compared to PEG.     

Hydrolytic and microbial degradation of multi-block polyurethanes based on poly(?-caprolactone)/poly(ethylene glycol) segments

Biodegradable amphiphilic multi-block poly(ether-ester-urethane)s were prepared by one-step bulk polycondensation of PEG and PCL macro-diols and HMDI. For biomedical or environmental applications of the proposed materials, one of the critical steps is the study of the degradation characteristics under physiological or environmental conditions. Different ratios of PEG/PCL and molecular weights of the resultant copolymers allowed for tuning their hydrophilicity, as evaluated by water uptake measurements. The swelling results were further supported by microgravimetric measurements performed by QCM-D. In vitro hydrolytic biodegradation was carried out under different conditions (i.e., in phosphate buffer solution - with and without Lipase). Total mineralization in the presence of microorganisms from a sample of river water was observed to follow different kinetics, depending upon the composition and the molecular weight of the copolymer.     

Synthesis and characterization of biodegradable pH-sensitive hydrogels based on poly(?-caprolactone), methacrylic acid, and poly(ethylene glycol)

In this work, a novel biodegradable pH-sensitive hydrogel based on poly(?-caprolactone) (PCL), methoxpoly(ethylene glycol) (MPEG) and methacrylic acid (MAA) was prepared by UV-initiated free radical polymerization. The resulting macromonomers and hydrogels were characterized by FTIR and/or ¹H NMR. Swelling behaviour and pH sensitivity of the hydrogels were studied in detail. With increase in pH of aqueous medium from 1.2 to 7.2, swelling ratio of the hydrogels increased accordingly. The hydrolytic degradation behaviour was also investigated. The prepared biodegradable pH-sensitive hydrogel based on PCL, MPEG, and MAA might have great potential application in smart drug delivery system.     

Thermal degradation of star-shaped poly(?-caprolactone)

Thermal degradation of a serials of star-shaped poly(?-caprolactone) (PCL) with well-defined arm numbers and arm length was investigated. The weight loss of star-shaped PCL during heating process showed a two-stage character, and its dependence on molecular weight and multi-armed structure was well discussed. It was found that the thermal stability could be improved not only by increasing molecular weight but also by increasing arm numbers when the molecular weight is in a certain range. Based on the analyses of pyrolytic products by ¹H NMR and TGA-FTIR, two mechanisms of thermal degradation for the random cleavage of ester bonds of PCL chains were proposed. Ester bonds were pyrolyzed into alkene and carboxyl functional groups in mechanism I while they were pyrolyzed into ketene and hydroxyl functional groups in mechanism II. The effects of multi-armed structure of star-shaped PCL on the cleavage of ester bonds of PCL chains were discussed in terms of the limitation of central “core” on mobility of each PCL arm. Combined the results of viscosity analysis with thermal analysis, it could be concluded that both thermal stability and processability of PCL materials can be improved by controlling the multi-armed structures.     

Solubility of naphthalene in aqueous solutions of poly(ethylene glycol)–poly(propylene glycol)–poly(ethylene glycol) triblock copolymers and (2-hydroxypropyl)cyclodextrins

The solubility of naphthalene was investigated in aqueous solutions of triblock copolymers poly(ethylene glycol)–poly(propylene glycol)–poly(ethylene glycol) (PEG–PPG–PEG) and (2-hydroxypropyl)cyclodextrins. The results with solutions of the individual solubilizers were as expected: the solubility enhancement was much higher with a micelle-forming copolymer than with the non-micellizing one and with (2-hydroxypropyl)--cyclodextrin (HPBCD) than with (2-hydroxypropyl)--cyclodextrin (HPACD). Although the formation of inclusion complexes between HPACD and PEG and between HPBCD and PPG is well established, the naphthalene solubility in mixed solutions does not significantly deviate from that predicted for a mixture of independent solubilizers. Thus the interactions between HPCD and PEG–PPG–PEG copolymers are not strong enough to disrupt micelles and aggregates formed by those copolymers. In fact, slight synergetic deviations were observed with the micellizing copolymer, indicating the existence of ternary naphthalene/HPCD/copolymer interactions. For pharmaceutical applications, it is important that the solubilization efficacy of PEG–PPG–PEG copolymers and that of cyclodextrins modified by the 2-hydroxypropyl group would not be compromised if these two types of solubilizers were co-administered.     

Selective assembly of cyclodextrins on poly(ethylene oxide)–poly(propylene oxide) block copolymers

This paper presents a computational study on the formation of a molecular necklace formed by specific threading of cyclodextrins (CDs) on block copolymers. Structural as well as energetic principles for the selective complexation of - and -cyclodextrin with poly(ethylene oxide)–poly(propylene oxide) block copolymers (PEO–PPO) are elucidated considering a diblock copolymer of equimolecular composition (PEO)4–(PPO)4 as guest. A non-statistical distribution of CDs, i.e. -CDs primarily located on the PEO chain and -CDs on PPO blocks of the polymer, is based on a variety of structural features and energetic preferences considering both potential as well as solvation energies. This selectivity becomes already obvious considering 1:1 complexes between PEO and PPO monomers and the two CDs, but is increasingly evident when calculating higher order ensembles. Besides the host–guest interaction, docking between CDs themselves is an important, also non-statistical, prerequisite for the self-assembly of highly ordered tubes. The formation of intermolecular hydrogen bonds between adjacent CDs in a tubular aggregate gives an important contribution to the overall stability of the molecular necklace. The net effect, based on the preferential interaction between host and guest as well as between the host molecules themselves, results in the formation of a stable, highly ordered macromolecular, multicomponent aggregate.     

Synthesis and characterization of aba-type block copolymer of poly(ϵ-caproplactone) with poly(ethylene glycol), by mean of activation end groups

Poly(?-caprolactone)-b-poly(ethylene glycol)-b-poly(?-caprolactone) (PCL-b-PEG-b-PCL) triblock copolymer were synthesized by mean anionic activation of the hydroxyl end groups of poly(ethylene glycol) in presence of diphenylmethylsodium. Copolymers were characterized by SEC, FT-IR and ¹H-NMR spectroscopy, TGA and DSC. Size exclusion chromatographic analysis of obtained copolymers indicated incorporation of CL monomer into PEG without formation of PCL homopolymer. Characterization by FT-IR and ¹H NMR spectroscopy of the resulting polymeric products, with respect to their structure, end-groups and composition, showed that they are best described as ester-ether-ester triblock copolymers, whose compositions can be adjusted changing the feeding molar ratio of PEG to CL. The thermal stability of triblock copolymers was less that PEG precursor, but higher that PCL homopolymer. Analysis by mean DSC showed that all copolymers were semi-crystalline and their thermal behavior depending on their composition.     

Thermal characterization of biodegradable methoxy poly(ethylene glycol)-b-poly(d,l-lactide)/methoxy poly(ethylene glycol)-b-poly(ε-caprolactone) blend nanoparticles

Biodegradable methoxy poly(ethylene glycol)-b-poly(d,l-lactide) (MPEG-b-PDLL) and methoxy poly(ethylene glycol)-b-poly(ε-caprolactone) (MPEG-b-PCL) diblock copolymers were synthesized by ring-opening polymerization of DLL and CL monomers in bulk using stannous octoate, and MPEG as the initiating system. Surfactant-free MPEG-b-PDLL/MPEG-b-PCL blend nanoparticles were prepared by the nanoprecipitation method. The influences of block length and blend ratio on morphology, average size, and thermal properties of the blend nanoparticles were determined. The blend nanoparticles were spherical in shape. The average particle sizes slightly decreased as the MPEG-b-PCL blend ratio increased. ¹H-NMR and thermogravimetry revealed the different MPEG-b-PDLL/MPEG-b-PCL blend ratios of the nanoparticles. Differential scanning calorimetry showed that the MPEG-b-PCL crystallinity steadily decreased as the MPEG-b-PDLL blend ratio increased, suggesting miscible blending between the MPEG-b-PDLL and MPEG-b-PCL in the amorphous phase of the nanoparticle matrix.     

Synthesis and characterization of poly(ethylene glycol) based β-cyclodextrin polymers

A series of novel water soluble β-cyclodextrin (βCD) polymers has been synthesized from functionalized poly(ethylene glycol) (PEG). The chemical composition of the polymers has been characterized by ¹H NMR and the βCD content is found to be between 48 and 33% (w/w). The molecular weight has been determined by Size Exclusion Chromatography (SEC) and depends on the ratio between βCD and PEG, varying from 2.1 × 10⁴ to 8.6 × 10⁴ g mol^?1. The physico chemical properties have been characterized by differential scanning calorimetry (DSC), viscometry and isothermal titration calorimetry (ITC). ITC shows that the polymers have association constants comparable to βCD with different guest molecules, indicating a good accessibility of the CDs.     

Influence of amorphous block on the thermal behavior of well-defined block copolymers based on ε-caprolactone

In this work, we studied the thermal characterization of block copolymers based on ε-caprolactone. The copolymers were obtained by anionic polymerization techniques, using different co-monomers such as styrene (S) and dimethylsiloxane (DMS). Synthesized copolymers were characterized by H-nuclear magnetic resonance, size exclusion chromatography, and Fourier transform infrared spectroscopy. Isothermal crystallization was performed by differential scanning calorimetry (DSC), and Avrami’s theory was employed in order to obtain kinetics parameters of interest, such as the half-life for the crystallization process (t _1/2), the bulk crystallization constant (k), and the Avrami’s exponent (n). The spherulitic growth was measured by polarized optical microscopy in order to determine the crystallization behavior. Poly(ε-caprolactone) block (PCL) crystallization was analyzed by considering the physico-chemical characteristics of the neighboring block, PS or PDMS. The chemical nature of the neighbor block in the PCL-based copolymer affects the kinetics parameters of Avrami’s equation, as can be deduced by comparing the values obtained for pure PCL and the studied block copolymers. On the other hand, the apparent thermal degradation activation energies E _ad for PCL and block copolymers were determined by Ozawa’s method. The incorporation of PDMS instead of PS improves the stability of the resulting copolymer, as it was observed by thermogravimetric analysis.     

Nanoparticle carriers based on copolymers of poly(ε-caprolactone) and hyperbranched polymers for drug delivery

Novel amphiphilic copolymers based on poly(ε-caprolactone) (PCL) and hyperbranched poly (amine-ester) (HPAE) with various compositions were synthesized. The amphiphilic copolymers can self-assemble into nanoscopic micelles and their hydrophobic cores can encapsulate doxorubicin (DOX) in aqueous solutions. The DOX-loaded HPAE-co-PCL nanoparticles diameter increased from 121 to 184 nm with the increasing PCL segment in the copolymer composition. An in vitro study at 37°C demonstrated that DOX-release from nanoparticles at pH 5.0 was much faster than that at pH 7.4. The cytotoxicity for HeLa cells study demonstrated that DOX-loaded HPAE-co-PCL nanoparticles exhibited the anti-tumor effect was enhanced significantly, suggesting that the DOX-loaded HPAE-co-PCL nanoparticles have great potential as a tumor drug carrier.     

Synthesis and micellar characterization of thermosensitive amphiphilic poly(ε-caprolactone)-b-poly(N-vinylcaprolactam) block copolymers

Poly(ε-caprolactone)-b-poly(N-vinylcaprolactam) (PCL-b-PVCL) block copolymers were synthesized as new biocompatible, thermosensitive, amphiphilic block polymers by a combination of ring-opening polymerization and reversible addition–fragmentation chain transfer (RAFT) polymerization, and their thermosensitive micellar behavior was examined. The PCL macro-chain-transfer agent was first synthesized by converting the end group of PCL-OH to O-ethyl xanthate, which was subsequently used for the RAFT polymerization of N-vinylcaprolactam. The critical micelle concentration of PCL-b-PVCL (M _n,NMR?=?56,300?g/mol, polydispersity index?=?1.18) was 0.026?mg/mL. The mean diameter of the PCL-b-PVCL micelles determined by transmission electron microscopy was 55?±?25?nm. The PCL-b-PVCL micelles exhibited repetitive aggregation and dispersion during reversible cooling and heating cycles between 20 and 40?°C due to the thermosensitive behavior of the PVCL shell. Overall, the PCL-b-PVCL block copolymers have potential applications in thermosensitive drug delivery applications.     

Preparation and characterization of microspheres based on blend of poly(lactic acid) and poly(ɛ-caprolactone) with poly(vinyl alcohol) as emulsifier

In this paper, microspheres were prepared by oil-in-water (o/w) emulsion solvent evaporation method. Biodegradable polymer such as blend of poly (lactic acid) (PLA) and poly(?-caprolactone) (PCL) with certain compositions and characteristics was used to prepare the microspheres with poly(vinyl alcohol) (PVA) as an emulsifier. This study observed the microspheres particle’s size distribution at various concentrations of PVA (1%, 1.5%, 2%, and 2.5% PVA). The PVA volume variations effects during the process (50, 100, 150, 200, and 250 mL) were also observed. The blend of PLA and PCL is formed only by physical interaction between them. This can be seen from the FTIR spectrum which shows both PLA and PCL component. The microspheres physical size and appearance were observed by optical microscope (MO). The overall results of this study showed that the formula which used 50–150 mL of 2.5% polyvinyl alcohol produced the microspheres with the most uniform size distribution.     

Microwave-Assisted Synthesis of Poly(ε-caprolactone)-block-poly(ethylene glycol) and Poly(lactide)-block-poly(ethylene glycol)

Summary: This study reported the preparation and characterization of PCL-b-mPEG (poly(ε-caprolactone)-block-poly(ethylene glycol)) and PLL-b-mPEG (poly(L-lactide)-block-poly(ethylene glycol)) diblock copolymers by microwave heating and comparison of resulted products the ones with prepared by conventional heating. Diblock copolymers were synthesized successfully by the microwave-assisted ROP in the presence of stannous octoate (SnOct₂) as catalyst under nitrogen atmosphere in different monomer ratios. Structural and functional characterization of copolymers were performed by FTIR, ¹H-NMR and DSC. Molecular weight values were determined by GPC and also calculated from ¹H-NMR. According to the results, microwave irradiation allowed to obtain polymers with very narrow size distribution in very short reaction time. Similar polymers prepared by conventional heating were also synthesized for comparison. Molecular weight and conversion of polymers were increased by irradiation time. This change was continued until a certain time point after which no more increase was observed. It was concluded that microwave irradiation is a succesful method to obtain these diblock copolymers in very short reaction time and with a similar conversion obtained by conventional method.     

Effect of block lengths on the association behavior of poly(l-lactic acid)/poly(ethylene glycol) (PLA–PEG–PLA) micelles in aqueous solution

A series of poly(l-lactic acid)/poly(ethylene glycol) triblock copolymers with a PLA–PEG–PLA architecture were synthesized by a ring-opening polymerization (ROP) process. The copolymers were characterized by ¹H NMR and GPC. The total number average molecular weights were in the range of 4,700–50,000, whereas the degrees of polymerization of the PLA and PEG blocks varied from 15 to 359 and from 68 to 136, respectively. The self-association of these copolymers in aqueous environment was studied by emission fluorescence spectroscopy of anilinonaphthalene probe and the critical association concentration (CAC) of the copolymers was measured. It was found that the micellization process of these copolymers was mainly determined by the length of the hydrophobic LA block, while the length of the hydrophilic PEG block had little effect. Furthermore, the low CAC values of the copolymers suggest that the copolymers form stable supramolecular structures in aqueous solutions.     

Block ionomer complex micelles based on the self-assembly of poly(ethylene glycol)-block-poly(acrylic acid) and CdCl₂ for anti-tumor drug delivery

A novel block ionomer complex micelles as drug carrier is developed utilizing self-assemble of poly(ethylene glycol)-block-poly(acrylic acid) (PEG-b-PAA) and cadmium chloride. This micelles are characterized to be have good bio-compatibility, hydrophilicity, passive targeting and sustained slow release property which shows great potential for liver cancer therapy. Block ionomer complex micelles based on PEG-b-PAA and cadmium chloride can self-assemble in distilled water, and Cd(2+) agent is entrapped into the core stabilized by PEG shells. Results showed the block ionomer complex micelles to be spherically shaped. Cadmium was incorporated easily into the ionic core with remarkably high efficiency (34.25% weight (wt)/wt). The cadmium-loaded polymeric micelles exhibited sustained and slow release behavior of cadmium and a potent cytotoxicity against SMMC-7721 in vitro. This novel block ionomer complex micelles with cores of metal antitumor drug indicates to be potential carriers for effective drug delivery.     

Abiotic degradation of poly(dl-lactide), poly(ɛ-caprolactone) and their blends

An effective hydrolytic degradation of PDLLA, PCL and their blends in a phosphate-buffered solution of pH 4.0 at 37 °C for 18 weeks was achieved, observing a considerably faster degradation of PDLLA as compared to PCL due to the hydrophobic and semicrystalline nature of PCL matrix, able to partially prevent water diffusion into the bulk specimen.DSC and FTIR results indicated that PCL phase, in compositions rich in PCL, was very stable against hydrolysis, but the presence of PDLLA in the PDLLA/PCL blends seemed to catalyze the hydrolytic degradation of the PCL phase, probably associated to easier diffusion of water into the PCL domains by the presence of PDLLA amorphous regions. This last trend was proportional to the content of PDLLA in the blends, excepting for the composition 64%PDLLA/36%PCL. It was confirmed that PCL molecules partially delayed hydrolysis of PDLLA molecules, according to FTIR analysis, and the water diffusion prevention level was proportional to the content of PCL in the blends, except for the system 64%PDLLA/36%PCL, which presented a lower extent of degradation than neat PDLLA but higher than the blend 80%PDLLA/20%PCL. This indicated that PCL molecules did not significantly impede hydrolysis of PDLLA molecules in this blend, possibly due to the achievement of a particular structure of the PDLLA/PCL interphase in this blend. In general, hydrolysis of PDLLA/PCL blends was found to be a complex phenomenon depending not only on the content of both polymer phases, but also on the polymer phase crystallinity and morphology.     

Chemical–physical behavior of hydrogels of poly(vinyl alcohol) and poly(ethylene glycol)

New hydrogels based on polyethylene glycol (PEG) and poly(vinyl alcohol) (PVA) of different degrees of hydrolysis were synthesized. To form the network the PEG was modified at their ends with acyl chloride groups to be used as the crosslinking agent. The compositions of the hydrogels were between 50% and 90% by weight of PEG and PVA of various degrees of hydrolysis were used. It was found that the degree of hydrolysis of the PVA and the PEG content influence the equilibrium water content of the hydrogel. The process of swelling of all the hydrogels prepared followed a second-order kinetics.     

Synthesis and characterization poly(ϵ-caprolactone-b-ethylene glycol-b-ϵ-caprolactone) ABA type block copolymers via “Click” chemistry and ring-opening polymerization

Synthesis of poly(?-caprolactone-b-ethylene glycol-b-?-caprolactone) ABA type block copolymer by “click” chemistry and ring-opening polymerization (ROP) was reported by using propargyl polyethylene glycol (propargyl-PEG) and terminally azido poly(?-caprolactone) ester (PCL-N₃). For this purpose, primarily propargyl-PEG was synthesized by using reaction of PEGs (3000 Da, 2000 Da, 1500 Da, 1000 Da, 600 Da ve 400 Da) and propargyl chloride. 3-azido-1-propanol was obtained by using chemical interaction of 3-chloro-1-propanol and sodium azide. Synthesis of PCL-N₃ was carried out by means of ROP of ?-caprolactone and 3-azido-1-propanol. Finally, poly(?-caprolactone-b-ethylene glycol-b-?-caprolactone) ABA type block copolymers were synthesized by using PCL-N₃ and propargyl-PEG. The primary parameters such as concentration, time, and temperature that influenced the reactions were assessed. The product characterization was achieved using NMR, FT-IR, GPC, elemental analysis, and fractional precipitation [non-solvent (petroleum ether-mL)/solvent (THF-mL)] techniques.