Gas‐transport properties of indan‐containing polyimides

A series of indan‐containing polyimides were synthesized, and their gas‐permeation behavior was characterized. The four polyimides used in this study were synthesized from an indan‐containing diamine [5,7‐diamino‐1,1,4,6‐tetramethylindan (DAI)] with four dianhydrides [3,3′4,4′‐benzophenone tetracarboxylic dianhydride (BTDA), 3,3′4,4′‐oxydiphthalic dianhydride (ODPA), (3,3′4,4′‐biphenyl tetracarboxylic dianhydride (BPDA), and 2,2′‐bis(3,4′‐dicarboxyphenyl) hexafluoropropane dianhydride (6FDA)]. The gas‐permeability coefficients of these four polyimides changed in the following order: DAI–BTDA < DAI–ODPA < DAI–BPDA < DAI–6FDA. This was consistent with the increasing order of the fraction of free volume (FFV). Moreover, the gas‐permeability coefficients were almost doubled from DAI–ODPA to DAI–BPDA and from DAI–BPDA to DAI–6FDA, although the FFV differences between the two polyimides were very small. The gas permeability and diffusivity of these indan‐containing polyimides increased with temperature, whereas the permselectivity and diffusion selectivity decreased. The activation energies for the permeation and diffusion of O₂, N₂, CH₄, and CO₂ were estimated. In comparison with the gas‐permeation behavior of other indan‐containing polymers, for these polyimides, very good gas‐permeation performance was found, that is, high gas‐permeability coefficients and reasonably high permselectivity. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 2769–2779, 2004     

Click chemistry in materials synthesis. II. Acid‐swellable crosslinked polymers made by copper‐catalyzed azide–alkyne cycloaddition

A highly crosslinked hyperbranched polymer that rapidly swells and shrinks in a halogenated solvent in response to the addition of an acid or base has been prepared by Cu(I) catalysis of the reaction between a diazide and an amine‐containing trialkyne. The triazole linkages in the polymer are highly stable and may also play a role in the swelling behavior. The swelling–deswelling process is reversible. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5513–5518, 2006     

New type of nanofiltration membrane based on crosslinked hyperbranched polymers

Novel nanofiltration (NF) membrane was developed from hydroxyl-ended hyperbranched polyester (HPE) and trimesoyl chloride (TMC) by in situ interfacial polymerization process using ultrafiltration polysulfone membrane as porous support. Fourier transform infrared spectroscopy (FTIR-ATR), scanning electron microscopy (SEM), atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS) and water contact angle (CA) measurements were employed to characterize the resulting membranes. The results indicated that the crosslinked hyperbranched polyester produced a uniform, ultra-thin active layer atop polysulfone (PSf) membrane support. FTIR-ATR spectra indicated that TMC reacted sufficiently with HPE. Water permeability and salts rejection of the prepared NF membrane were measured under low trans-membrane pressures. The resulting NF membranes exhibited significantly enhanced water permeability while maintaining high rejection of salts. The salts rejection increase was accompanied with the flux decrease when TMC dosage was increased. The flux and rejection of NF 1 for Na₂SO₄ (1 g/L) reached to 79.1 l/m² h and 85.4% under 0.3 MPa. The results encourage further exploration of NF membrane preparation using hyperbranched polymers (HBPs) as the selective ultra-thin layer.     

Highly stereo‐efficient synthesis and luminescence properties of novel trans‐regular vinylene– silylene–thiophene polymers

The novel trans‐stereo‐regular silylene–thiophene derivatives ( 4 , 5 ) with perfect consecutive silylene–arylene–silylene–vinylene linkage were synthesized via silylative coupling polycondensation of 2,5‐bis(vinyldimethylsilyl)thiophene ( 2 ) or 5,5′‐bis(vinyldimethylsilyl)‐2,2′‐bithiophene ( 3 ) catalyzed by ruthenium‐hydride complex [RuHCl(CO)(PCy₃)₂] ( 1 ). Their spectroscopic, absorption, and luminescence properties were characterized and compared with those of model compounds containing thiophene or bithiophene chromophores. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 127–137, 2008     

Controlling open‐shell loading in norbornene‐based radical polymers modulates the solid‐state charge transport exponentially

Radical polymers are an emerging class of electronically active macromolecules; however, the fundamental mechanism by which charge is transferred in these polymers has yet to be established in full. To address this issue, well‐defined norbornene‐based nitroxide radical polymers were synthesized using the controlled ring‐opening metathesis polymerization technique. These polymers were blended in solution with a quenched, electrically insulating hydroxylamine derivative to dilute the radical content of the system. Electron paramagnetic resonance spectroscopy data were used to characterize the radical content as well as to reveal that hydrogen atom transfer occurred between the open‐shell and closed‐shell polynorbornene derivatives when they were blended in solution. Using these platform macromolecules, we demonstrate that the systematic manipulation of the radical content in open‐shell macromolecules leads to exponential changes in the macroscopic electrical conductivity. When coupled with the fact that these materials show a clear temperature‐independent charge transport behavior, a picture emerges that charge transfer in radical polymers is dictated by a tunneling mechanism between localized donor and acceptor sites within the redox‐active thin films. These results constitute the first experimental insight into the mechanism of solid‐state electrical conduction in radical polymers, and this provides a design paradigm for open‐shell macromolecular charge transport. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 1516–1525     

Utilizing thiol–ene chemistry for crosslinked nickel cation‐based anion exchange membranes

Metal cation‐based anion exchange membranes (AEMs) are a unique class of materials that have shown potential to be highly stable AEMs with competitive conductivities. Here, we expand upon previous work to report the synthesis of crosslinked nickel cation‐based AEMs formed using the thiol–ene reaction. These thiol–ene‐based samples were first characterized for their morphology, both with and without nickel cations, where the nickel‐containing membranes demonstrated a disordered scattering peak characteristic of ionic clusters. The samples were then characterized for their water uptake, chemical and mechanical stability, and conductivity. They showed a combination of high water content and extreme brittleness, which also resulted in fairly low conductivity. The brittleness resulted from large water swelling as well as the need for each nickel cation to act as a crosslinker, necessary with the current nickel‐coordination chemistry. Therefore, increasing the ion exchange capacity (IEC) for these types of AEMs, important for enhancing conductivity, also increased the crosslink density. The low conductivity and brittleness seen in this work demonstrated the need to develop non‐crosslinking metal‐complexes. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 328–339     

Investigating time–temperature superpositioning in crosslinked polymers using the tube‐junction model

This article examines the application of time–temperature superpositioning (TTS) in certain thermorheologically complex polymers using a recently developed phenomenological model that describes crosslinked polymer viscoelasticity based on fundamental physical considerations. The model's capability to calculate both isochronal temperature sweeps and isothermal frequency sweeps of storage and loss moduli allows us to simulate conditions typical of certain thermorheologically complex polymers. We use the model to generate modulus frequency sweeps over the limited range of frequencies that are typically accessible to experiments. We apply TTS to shift these sweeps along the frequency axis to construct master curves. The model master curves are then compared with the model's “true” moduli curves over the full frequency domain at the reference temperature. This comparison suggests that nonsuperposability may go unnoticed if we only rely on the smoothness of the storage modulus master curve. Superpositioning to achieve a smooth loss modulus master curve tends to be more reliable. This has serious implications for assessing the reliability of relaxation moduli and creep compliance master curves that have no associated loss component that can be used to assess the quality of superpositioning. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 127–142, 1999     

Hypercrosslinked Additives for Ageless Gas‐Separation Membranes

The loss of internal pores, a process known as physical aging, inhibits the long‐term use of the most promising gas‐separation polymers. Previously we reported that a porous aromatic framework (PAF‐1) could form a remarkable nanocomposite with gas‐separation polymers to stop aging. However, PAF‐1 synthesis is very onerous both from a reagent and reaction‐condition perspective, making it difficult to scale‐up. We now reveal a highly dispersible and scalable additive based on α,α′‐dichloro‐p‐xylene (p‐DCX), that inhibits aging more effectively, and crucially almost doubles gas‐transport selectivity. These synergistic effects are related to the intimately mixed nanocomposite that is formed though the high dispersibility of p‐DCX in the gas‐separation polymer. This reduces particle‐size effects and the internal free volume is almost unchanged over time. This study shows this inexpensive and scalable polymer additive delivers exceptional gas‐transport performance and selectivity.     

Preparation of polymers having hole and electron transport units by Friedel–Crafts reaction

Polymers having 2,5‐diphenyl‐1,3,4‐oxadiazole (BCO) or anthracene (BCA) as an electron transport unit and N,N′‐diphenyl‐N,N′‐bis(4‐butylphenyl)‐benzidine (BTPD) as a hole transport unit were prepared by condensation polymerization using Friedel–Crafts reaction. It was found that BCO was less reactive than BCA. The low reactivity of the BCO monomer can be explained by the oxygen atom in the oxadiazole unit, which acts as a Lewis base and reduces the activity of the catalyst. The redox behavior measured by cyclic voltammetry showed for both BTPD‐BCO and BTPD‐BCA almost the same oxidation potential. In addition, the BTPD‐BCO also exhibited a reduction peak. Hole and electron drifts mobility of the polymers were measured by the time‐of‐flight method. The hole drift mobility of both BTPD‐BCO and BTPD‐BCA was 7.4 × 10^?5 cm² V^?1 s^?1. The electron drift mobilities of BTPD‐BCO and BTPD‐BCA were 6.5 × 10^?5 cm² V^?1 s^?1 and 5.2 × 10^?6 cm² V^?1 s^?1, respectively. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3083–3089, 2007     

Structural characterization and gas‐transport properties of brominated matrimid polyimide

The commercial polyimide Matrimid was modified by bromination for the purpose of improving its membrane‐transport properties as a gas‐separation material and providing functional group reactivity for further modifications. The unmodified and brominated polymers were characterized by elemental analysis and one‐dimensional and two‐dimensional NMR, which revealed that one bromine atom per repeat unit was incorporated regioselectively onto the indane aromatic ring. The thermal and physical properties of the polymers before and after bromination were also investigated. The gas‐transport properties of the unmodified and brominated polymers were compared. © 2002 Government of Canada. Exclusive worldwide publication rights in the article have been transferred to Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4193–4204, 2002     

Modified polysulfones. IV. Synthesis and characterization of polymers with silicon substituents for a comparative study of gas‐transport properties

We previously conducted a detailed study of gas‐transport and other properties of a series of silicon derivatives of Udel polysulfone (PSf) and Radel polyphenylsulfone; we now report the details of their preparation by the reaction of lithiated polymer intermediates with chlorosilylalkylaryl electrophiles. Ortho‐sulfone‐substituted polymers with pendant trimethylsilyl, dimethylphenylsilyl, and diphenylmethylsilyl and other groups were obtained by direct metalation followed by the reaction of the dilithiated intermediate with the appropriate silyl electrophile. In addition, the structural regularity and geometry of the dilithiated site was also exploited to introduce silicon into the main chain by the reaction of dichlorosilyl electrophiles, leading to the formation of a new tricyclic heteroatom ring. Ortho‐ether PSf derivatives were obtained from a dibrominated polymer via the lithiation of brominated polymer and reaction with a silyl electrophile. The degree of substitution of the silyl groups was 2.0 or less from dilithiated polymers and was dependent on the electrophile reactivity and reaction conditions. A detailed structural characterization of the polymers by NMR and IR spectroscopy is reported in addition to glass‐transition temperatures and thermal stabilities. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2103–2124, 2001     

Sugar acrylate‐based polymers as chiral molecularly imprintable hydrogels

New polymeric hydrogels with molecular imprinting properties were prepared from enzymically generated sugar acrylates. These so called MIPs (molecularly imprinted polymers) were used as chiral stationary phases for the resolution of the D ‐ and L ‐isomers of CBz–Asp in polar organic eluants. In the presence of 25% (mol/mol) methyl‐α‐D ‐glucopyranoside‐6‐acrylate [the balance consisting of N,N′‐methylenebisacrylamide (BIS)], a separation factor of nearly 2.5 is achieved. The effectiveness of separation was dependent on the nature of the solvent used as eluant and the sugar incorporated into the MIP. Molecular modeling revealed that hydrogen bonding between the sugar and CBz–Asp strongly influences chiral resolution. The broad array of sugars available and their ability to be modified selectively with the use of biocatalysts in both aqueous and organic media may provide a wide range of new imprinted materials for use in separations, sensing, and catalysis. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1665–1671, 1999     

Healable dual organic–inorganic crosslinked sol–gel based polymers: Crosslinking density and tetrasulfide content effect

In this article, the first generation of healable sol–gel based polymers is reported. A dual organic–inorganic crosslinked network is developed containing non‐reversible crosslinks and reversible (tetrasulfide) groups. The designed polymer architecture allows thermally induced mesoscale flow leading to damage closure followed by interfacial strength restoration due to reformation of the reversible groups. While the reversible bonds are responsible for the flow and the interface restoration, the irreversible crosslinks control the required mechanical integrity during the healing process. The temperature dependent gap closure kinetics is strongly affected by the crosslinking density and tetrasulfide content. Raman spectroscopy is used to explain the gap closure kinetics in air and dry nitrogen. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1953–1961     

Low loss second‐order non‐linear optical crosslinked polymers based on a phosphorus‐containing maleimide

A series of crossslinked organic and organic/inorganic polymers based on maleimide chemistry have been investigated for second‐order non‐linear optical (NLO) materials with excellent thermal stability and low optical loss. Two reactive chromophores (maleimide‐containing azobenzene dye and alkoxysilane‐containing azobenzene dye) were incorporated into a phosphorus‐containing maleimide polymer, respectively. The selection of the phosphorus‐containing maleimide polymer as the polymeric matrices provides enhanced solubility and thermal stability, and excellent optical quality. Moreover, a full interpenetrating network (IPN) was formed through simultaneous addition reaction of the phosphorus‐containing maleimide, and sol‐gel process of alkoxysilane dye (ASD). Atomic force microscopy (AFM) results indicate that the inorganic networks are distributed uniformly throughout the polymer matrices on a nano‐scale. The silica particle sizes are well under 100 nm. Using in situ contact poling, the r₃₃ coefficients of 2.2–17.0 pm/V have been obtained for the optically clear phosphorus‐containing NLO materials. Excellent temporal stability (100°C) and low optical loss (0.99–1.71 dB/cm; 830 nm) were also obtained for these phosphorus‐containing materials. Copyright © 2004 John Wiley & Sons, Ltd.     

Gas transport properties of polymers based on spirobiindane bisphenol

Transport properties of pure gases in polycarbonates, polyesters, and polyetherimides based on 6,6′-dihydroxy-3,3,3′,3′-tetramethyl-1,1′-spiro biindane (SBI) and bisphenol-A (BPA) are compared at 35°C. The SBI monomer contains two spiro-linked five-membered rings which are fused to the phenyl rings at the meta and para positions to the hydroxyl groups. This molecular structure gives SBI-based polymers with higher fractional free volume (FFV) and lower intramolecular motions as compared to the BPA-based analogs. The inhibition of chain packing due to the SBI moiety yields polymers with much higher permeabilities for all the gases studied, despite the hinderance of mobility associated with the SBI structure. Simultaneous increase in selectivity was also observed for some gas pairs. Oxygen permeabilities up to 5.9-fold higher with increases of up to 13% in O₂/N₂ selectivities were observed for a polyester based on SBI as compared to its analog based on BPA. Higher permeabilities of up to 4.3-fold for He and up to 4.8-fold for CO₂ were observed due to the substitution of SBI for BPA. Not surprisingly, lower values of He/CH₄ and CO₂/CH₄ selectivities were obtained for the more open SBI-containing polymers. The changes in fractional free volume and inhibition of small-scale mobility for some materials caused by the SBI moiety were measured and used in the interpretation of the gas transport properties. The individual contributions of diffusivity and solubility to the overall transport behavior of the polymers are discussed and correlated to the structural alterations caused by the SBI substitution for BPA monomer. © 1995 John Wiley & Sons, Inc.     

Synthesis and properties of fluorene‐based fluorinated polymers

Fluorene‐based polymers containing various fluorinated benzene (fluorobenzene, p‐difluorobenzene, and tetrafluorobenzene) moieties were synthesized. In addition, perfluorooctylation of poly‐[(9,9‐dioctylfluorene‐2,7‐diyl)‐co‐(fluorene‐2,7‐diyl)] was carried out to afford fluorene‐based polymers with perfluorooctyl moiety at the 9‐position on the fluorene ring. To evaluate the effect of fluorine moiety, polymers containing nonfluorinated benzene moieties and nonfluorinated octyl groups were synthesized. The photoluminescence measurements indicated that all these polymers exhibited blue emission in solution, but a polymer containing a perfluorooctyl group did not emit in the film state. Polymers containing various fluorinated benzene moieties showed higher fluorescence quantum yields and thermal stability than those containing nonfluorinated benzene. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3143–3150, 2001     

Water‐mediated transport in ion‐containing polymers

Water‐mediated ion conduction enables high conductivity in hydrated polymer membranes commonly used in electrochemical devices. Understanding the coupling of the absorbed water with the polymer matrix and the dynamics of water inside the polymer network across the full range of length scales in the membrane is important for unraveling the structure–property relationships in these materials. By considering the water behavior in ion‐containing polymers, next‐generation fuel cell membranes are being designed that exceed the conductivity of the state‐of‐the‐art materials and have optimized conductivity and permeability that may be useful in other types of devices such as redox flow batteries. Water–polymer associations can be exploited to tune the transport and mechanical property tradeoffs in these polymers. Measurements of water motion provide important criteria for assessing the factors that control the performance of these types of materials. This review article discusses current understanding of water behavior in ion‐containing polymers and the relationship between water motion and ion and molecular transport. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Fluoro‐protected carbazole main‐chain polymers as a new class of stable blue emitting polymers

The protection of the 3,6‐positions of 9‐alkyl‐9H‐carbazole repeat units with fluorine substituents in 2,7‐linked main‐chain polymers as well as in copolymers with triaryl amine repeat units affords blue emitting materials with enhanced electrolytic stability. The electronic conjugation of this new class of materials is more extended than that of the equivalent polymers where the 3,6‐positions are protected with methyl substitutions as a result of the smaller steric hindrance of their fluorine substituents. Attachment of fluorine‐protecting groups at the 3,6‐positions of carbazole repeat units in the homopolymers resulted in materials with relatively high ionization potentials (5.71 eV). However, introduction of triaryl amine comonomers as alternating repeat units provided carbazole/triaryl amine copolymers with a low ionization potential (5.25 eV), a very high quantum yield of fluorescence in solution (0.96), and narrow emission bands [full width at half maximum (FWHM) = 52 nm]. The preparation of this new class of materials together with a study of their electronic and photophysical properties is presented. Copyright © 2007 John Wiley & Sons, Ltd.     

Pyrene‐cored covalent organic polymers by thiophene‐based isomers,their gas adsorption,and photophysical properties

Two new pyrene‐cored covalent organic polymers (COPs), CK‐COP‐1 and CK‐COP‐2 , were synthesized via the one‐step polymerization of two thiophene‐based isomers, 1,3,6,8‐tetra(thiophene‐2‐yl) pyrene ( L₁ ) and 1,3,6,8‐tetra(thiophene‐3‐yl) pyrene ( L₂ ). The resulting pyrene‐cored COPs exhibit rather different surface areas of 54 m² g^?1 and 615 m²g^?1 for CK‐COP‐1 and CK‐COP‐2 , respectively. The CO₂ uptake capacities of CK‐COP‐1 and CK‐COP‐2 also show different values of 2.85 and 9.73 wt % at 273 K, respectively. Furthermore, CK‐COP‐2 offers not only a larger CO₂ adsorption capacity but also a better CO₂/CH₄ selectivity at 273 K compared with CK‐COP‐1 . CK‐COP‐1 and CK‐COP‐2 also exhibit considerable differences in their photophysical property. The different structure and properties of CK‐COPs could be attributed to the isomer effect of their corresponding thiophene‐based monomers. © 2017 Authors. Journal of Polymer Science Part A: Polymer Chemistry Published by Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 2383–2389     

Triarylamine N‐functionalized 3,6‐linked carbazole main chain polymers and copolymers: Preparation and physical properties

The preparation of triarylamine N‐functionalized 3,6‐linked carbazole homopolymers as well as alternating copolymers with 2,5‐diphenyl‐[1,3,4]oxadiazole and benzo[1,2,5]thiadiazole was undertaken using Suzuki cross‐coupling polymerization procedures associating 3,6‐bis(4,4,5,5‐tetramethyl‐[1,3,2]dioxaborolan‐2‐yl)‐9‐(bis[4‐(2‐butyl‐octyloxy)‐phenyl]‐amino‐phen‐4‐yl)‐carbazole and, respectively, 3,6‐dibromo‐9‐(bis[4‐(2‐butyl‐octyloxy)‐phenyl]‐amino‐phen‐4‐yl)‐carbazole, 2,5‐bis(4‐bromo‐phenyl)‐[1, 3,4]oxadiazole, and 4,7‐dibromo‐benzo[1,2,5]thiadiazole. Both the carbazole homopolymer and alternating copolymer with 2,5‐diphenyl‐[1,3,4]oxadiazole were found as wideband gap materials emitting in the blue part of the electromagnetic spectrum while the carbazole alternating copolymer with 4,7‐benzo[1,2,5]thiadiazole had a narrower band gap and emitted in the orange part of the electromagnetic spectrum. The new polymers are thermally stable up to 300 °C. A discussion of the electrochemical and optical properties of the new polymers is presented. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5957–5967, 2007.