Preparative manipulation of gold nanoparticles by reversible binding to a polymeric solid support

A preparative scheme is presented for controlled modification of gold nanoparticles (NPs) by using reversible binding to a polymeric solid support through boronic acid chemistry. Octanethiol-capped Au NPs were bound to a boronic acid functionalized resin by custom-synthesized bifunctional linker molecules. The NPs were chemically released from the resin to the solution, with one (or a few) linker molecules embedded in their capping layer. This was confirmed by rebinding the linker-derivatized NPs to a boronic resin, exploiting the reversibility of the boronic acid/diol chemistry. The same scheme was employed to demonstrate a new method for affinity separation of NPs by means of a solid-phase reaction. The use of boronic acid provides versatility and chemical reversibility, while the polymeric solid support affords the separation and preparative aspects. The method presented here may be useful in various facets of NP handling, manipulation, and separation.     

Matrix isolation infrared spectroscopic and theoretical study of noble gas coordinated dipalladium–dioxygen complexes

The reaction products of palladium atoms with molecular oxygen in solid argon have been investigated using matrix isolation infrared absorption spectroscopy and quantum chemical calculations. In addition to the previously reported mononuclear palladium–dioxygen complexes: Pd(η²–O₂) and Pd(η²–O₂)₂, dinuclear palladium–dioxygen complexes: Pd₂(η²–O₂) and Pd₂(η²–O₂)₂ were formed under visible light irradiation and were identified on the basis of isotopic substitution and theoretical calculations. In addition, experiments doped with xenon in argon coupled with theoretical calculations suggest that the Pd(η²–O₂), Pd₂(η²–O₂) and Pd₂(η²–O₂)₂ complexes are coordinated by two argon or xenon atoms in solid argon matrix, and therefore, should be regarded as the Pd(η²–O₂)(Ng)₂, Pd₂(η²–O₂)(Ng)₂ and Pd₂(η²–O₂)₂(Ng)₂ (NgAr or Xe) complexes isolated in solid argon.     

The Autoxidation of Triaryl Trithioarsenites, (ArS)3As: Evidence for Binding and Activation of Triplet Dioxygen by Arsenic(III)

Triaryl trithioarsenites, (ArS)₃As, are oxidized by air to As ₂ O ₃ and ArSSAr. In two cases the parent “thiol” (pyrid-2-thione and 1-hydroxypyrid-2-thione) is coproduced. The oxidation, in nonprotic solvents, is favored by electron-withdrawing groups at the para position of the phenyl group. The products obtained in nonprotic solvents were rationalized by assuming that the binding of the triplet dioxygen to arsenic(III) gives a triplet diradical, (ArS) ₃ A?─O─?, or an arsenadioxirane, (ArS) ₃ As(O ₂ ), intermediate, which decomposes after nucleophilic attack by another (ArS) ₃ As molecule. In protic solvents a zwitterion, (ArS) ₃ As⁺─O─O^?, and in the presence of moisture a hydroperoxy arsenic(V) compound, (ArS)₃As(OH)─O─OH, may be intermediates in the air oxidation of some aromatic trithioarsenites. These data tend to indicate that arsenic(III) bound to suitable groups can directly bind dioxygen, a property which may have implications in chemotherapy and carcinogenesis.     

Synthetic models of the active site of cytochrome C oxidase: influence of tridentate or tetradentate copper chelates bearing a His--Tyr linkage mimic on dioxygen adduct formation by heme/Cu complexes

Two synthetic models of the active site of cytochrome c oxidase--[(LN4-OH)CuI-FeII(TMP)]+ (1 a) and [(LN3-OH)CuI-FeII(TMP)]+ (2 a)-have been designed and synthesized. These models each contain a heme and a covalently attached copper moiety supported either by a tetradentate N4-copper chelate or by a tridentate N3-copper chelate including a moiety that acts as a mimic of the crosslinked His-Tyr component of cytochrome c oxidase. Low-temperature oxygenation reactions of these models have been investigated by spectroscopic methods including UV/Vis, resonance Raman, ESI-MS, and EPR spectroscopy. Oxygenation of the tetradentate model 1 a in MeCN and in other solvents produces a low-temperature-stable dioxygen-bridged peroxide [(LN4-OH)CuII-O2-FeIII(TMP)]+ {nuO--O=799 (16O2)/752 cm(-1) (18O2)}, while a heme superoxide species [(TMP)FeIII(O2-)CuIILN3-OH] {nuFe--O2: 576 (16O2)/551 cm(-1) (18O2)} is generated when the tridentate model 2 a is oxygenated in EtCN solution under similar experimental conditions. The coexistence of a heme superoxide species [(TMP)FeIII(O2-)CuIILN3-OH] and a bridged peroxide [(LN3-OH)CuII-O2-FeIII(TMP)]+ species in equal amounts is observed when the oxygenation reaction of 2 a is performed in CH2Cl(2)/7 % EtCN, while the percentage of the peroxide (approximately 70 %) in relation to superoxide (approximately 30 %) increases further when the crosslinked phenol moiety in 2 a is deprotonated to produce the bridged peroxide [(LN3-OH)CuII-O2-FeIII(TMP)]+ {nuO--O: 812 (16O2)/765 cm(-1) (18O2)} as the main dioxygen intermediate. The weak reducibility and decreased O2 reactivity of the tricoordinated CuI site in 2 a are responsible for the solvent-dependent formation of dioxygen adducts. The initial binding of dioxygen to the copper site en route to the formation of a bridged heme-O2-Cu intermediate by model 2 a is suggested and the deprotonated crosslinked His-Tyr moiety might contribute to enhancement of the O2 affinity of the CuI site at an early stage of the dioxygen-binding process.     

Adducts of aqua complexes of Ln3+ with a symmetrical octamethyl-substituted cucurbituril: potential applications for isolation of heavier lanthanides

Interaction of a series of lanthanide cations (Ln³⁺) with a symmetrical octamethyl-substituted cucurbituril (OMeQ[6]) has been investigated. X-ray single-crystal diffraction analysis has revealed that the interaction results in the formation of adducts of OMeQ[6] with aqua complexes of lanthanide cations ([Ln(H₂O)₈]³⁺), Ln = Eu, Gd, Tb, Dy, Ho, Er, Tm and Yb in OMeQ[6]–Ln(NO₃)₃–H₂O systems. However, no solid crystals were obtained from systems containing La, Ce, Pr, Nd and Sm. X-ray diffraction analysis has revealed that although the solid adducts fall into two isomorphous groups, there are no significant differences in the interactions between OMeQ[6] and [Ln(H₂O)₈]³⁺ complexes and in the corresponding supramolecular assemblies. Thermodynamic parameters for the interaction between OMeQ[6] and [Ln(H₂O)₈]³⁺ complexes based on isothermal titration calorimetry experiments show two periods corresponding to the above two systems, with the lighter lanthanide cations preferring to remain in solution and the heavier lanthanide cations forming crystalline solids. Electron spectroscopy has shown that interaction of OMeQ[6] with lanthanide cations could provide a means of isolating heavier lanthanide cations from their lighter counterparts.     

Vibrational spectrum and structure of CoO6: a model compound for molecular oxygen reversible binding on cobalt oxides and salts; a combined IR matrix isolation and theoretical study

The formation and structure of a novel species, a disuperoxo-cobalt dioxide complex (CoO(6)), has been investigated using matrix isolation in solid neon and argon, coupled to infrared spectroscopy and by quantum chemical methods. It is found that CoO(6) can be formed by successive complexation of cobalt dioxide by molecular oxygen without activation energy by diffusion of ground state O(2) molecules at 9K in the dark. The IR data on one combination and seven fundamentals, isotopic effects, and quantum chemical calculations are both consistent with an asymmetrical structure with two slightly nonequivalent oxygen ligands complexing a cobalt dioxide subunit. Evidence for other, metastable states is also presented, but the data are not complete. The electronic structure and formation pathway of this unique, formally +VI oxidation state, complex has been investigated using several functionals of current DFT within the broken-symmetry unrestricted formalism. It has been shown that the M06L pure local functional well reproduce the experimental observations. The ground electronic state is predicted to be an open shell (2)A' doublet with the quartet states above by more than 9 kcal/mol and the sextet lying even higher in energy. The ground state has a strong and complex multireference character that hinders the use of more precise multireference approaches and requires caution in the methodology to be used. The geometrical, energetic, and vibrational properties have been computed.     

Binding of the Zn2+ ion to ferric uptake regulation protein from E. coli and the competition with Fe2+ binding: a molecular modeling study of the effect on DNA binding and conformational changes of Fur

The three dimensional structure of Ferric uptake regulation protein dimer from E. coli, determined by molecular modeling, was docked on a DNA fragment (iron box) and Zn²⁺ ions were added in two steps. The first step involved the binding of one Zn²⁺ ion to what is known as the zinc site which consists of the residues Cys 92, Cys 95, Asp 137, Asp141, Arg139, Glu 140, His 145 and His 143 with an average metal-Nitrogen distance of 2.5 Å and metal-oxygen distance of 3.1–3.2 Å. The second Zn²⁺ ion is bound to the iron activating site formed from the residues Ile 50, His 71, Asn 72, Gly 97, Asp 105 and Ala 109. The binding of the second Zn²⁺ ion strengthened the binding of the first ion as indicated by the shortening of the zinc-residue distances. Fe²⁺, when added to the complex consisting of 2Zn²⁺/Fur dimer/DNA, replaced the Zn²⁺ ion in the zinc site and when a second Fe²⁺ was added, it replaced the second zinc ion in the iron activating site. The binding of both zinc and iron ions induced a similar change in Fur conformations, but shifted residues closer to DNA in a different manner. This is discussed along with a possible role for the Zn²⁺ ion in the Fur dimer binding of DNA in its repressor activity. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Unveiling the binding interaction of zinc (II) complexes of homologous Schiff-base ligands on the surface of BSA protein: A combined experimental and theoretical approach

Four new zinc (II) complexes [Zn (HL¹H)Br₂] (1), [Zn (HL¹H)Cl₂] (2), [Zn₂(HL²)Br₃] (3), and [Zn (HL²)Cl] (4) have been synthesized by adopting template synthetic strategy and utilizing two homologous Schiff base ligands (H₂L¹ = 4-bromo-2-{[2-(2-hydroxyethylamino)-ethylimino]-methyl}-6-methoxyphenol, H₂L² = 4-bromo-2-{[3-(2-hydroxyethylamino)propylimino]methyl}-6-methoxyphenol), differing in one -CH₂- unit in the ligating backbone, by adopting template synthetic strategy. All the complexes have been characterized by single crystal X-ray diffraction analysis as well as by other routine physicochemical techniques. Ligand mediated structural variations have been observed and rationalized by density functional theoretical (DFT) calculations. Interaction of the complexes 1–4 with Bovine Serum Albumin protein (BSA) has been studied by different spectroscopic techniques. A complete thermodynamic profile (ΔH^o, ΔS^o and ΔG^o) was evaluated initially from the change in absorption and fluorescence spectra upon addition of BSA to the complexes. Appreciable binding constant values in the range ~ 0.94–4.51 × 10⁴ M⁻¹ indicate efficient binding tendency of the complexes to BSA with the sequence 1 ≅ 2 > 3 ≅ 4. Circular dichroism (CD), isothermal calorimetric titration experiments, molecular docking and molecular dynamics have been performed to gain deep insight into the binding regions of complex 1 to BSA. Experimental evidences suggest an interaction of zinc complexes at the surface of BSA protein and this particular binding has been exploited to determine unknown concentration of BSA protein. For this purpose complex 1 was explored as a BSA protein quantification tool.     

Synthesis,structural characterization and DNA binding affinity of new bioactive nano‐sized transition metal complexes with sulfathiazole azo dye for therapeutic applications

The azo dye ligand 4‐(5‐chloro‐2‐hydroxyphenylazo)‐N‐thiazol‐2‐ylbenzenesulfonamide (H₂L) formed by the coupling reaction of sulfathiazole and p‐chlorophenol was synthesized and characterized using elemental analysis and Fourier transform infrared (FT‐IR) as well as UV–visible spectra. Nano‐sized divalent Cu, Co, Ni, Mn and Zn complexes of the synthesized azo dye ligand were prepared and investigated using various spectroscopic and analytical techniques. Elemental and thermal analyses indicated the formation of the Cu(II), Ni(II) and Mn(II) complexes in a molar ratio of 1:2 (L:M) while Co(II) and Zn(II) complexes exhibited a 1:1 (M:L) ratio. FT‐IR spectral studies confirmed the coordination of the ligand to the metal ions through the phenolic hydroxyl oxygen, azo nitrogen, sulfonamide oxygen and/or thiazole nitrogen. The geometric arrangements around the central metal ions were investigated applying UV–visible and electron spin resonance spectra, thermogravimetric analysis and molar conductance measurements. X‐ray diffraction patterns revealed crystalline nature of H₂L and amorphous nature of all synthesized complexes. Transmission electron microscopy images confirmed nano‐sized particles and their homogeneous distribution over the complex surface. Antibacterial, antifungal and antitumour activities of the investigated complexes were screened compared with familiar standard drugs to confirm their potential therapeutic applications. The Cu(II) complex showed IC₅₀ of 3.47 μg ml^?1 (5.53 μM) against hepatocellular carcinoma cells, which means that it is a more potent anticancer drug compared with the standard cisplatin (IC₅₀ = 3.67 μg ml^?1 (12.23 μM)). Furthermore, the Co(II), Ni(II), Cu(II) and Zn(II) complexes displayed IC₅₀ greater than that of an applied standard anticancer agent (5‐flurouracil) towards breast carcinoma cells. Hence, these complexes can be considered as promising anticancer drugs. The mode of binding of the complexes with salmon serum DNA was determined through electronic absorption titration and viscosity studies.     

Surface Chemistry on Small Ruthenium Nanoparticles: Evidence for Site Selective Reactions and Influence of Ligands

The reactivity of two classes of ruthenium nanoparticles (Ru NPs) of small size, either sterically stabilized by a polymer (polyvinylpyrrolidone, PVP) or electronically stabilized by a ligand (bisdiphenylphosphinobutane, dppb) was tested towards standard reactions, namely CO oxidation, CO₂ reduction and styrene hydrogenation. The aim of the work was to identify the sites of reactivity on the nanoparticles and to study how the presence of ancillary ligands can influence the course of these catalytic reactions by using NMR and IR spectroscopies. It was found that CO oxidation proceeds at room temperature (RT) on Ru NPs but that the system deactivates rapidly in the absence of ligands because of the formation of RuO₂. In the presence of ligands, the reaction involves exclusively the bridging CO groups and no bulk oxidation is observed at RT under catalytic conditions. The reverse reaction, CO₂ reduction, is achieved at 120 °C in the presence of H₂ and leads to CO, which coordinates exclusively in a bridging mode, hence evidencing the competition between hydrides and CO for coordination on Ru NPs. The effect of ligands localized on the surface is also evidenced in catalytic reactions. Thus, styrene is slowly hydrogenated at RT by the two systems Ru/PVP and Ru/dppb, first into ethylbenzene and then into ethylcyclohexane. Selectively poisoning the nanoparticles with bridging CO groups leads to catalysts that are only able to reduce the vinyl group of styrene whereas a full poisoning with both terminal and bridging CO groups leads to inactive catalysts. These results are interpreted in terms of location of the ligands on the particles surface, and evidence site selectivity for both CO oxidation and arene hydrogenation.     

Diagnostic organometallic and metallodendritic materials for SO2 gas detection: reversible binding of sulfur dioxide to arylplatinum(II) complexes

A series of square-planar platinum(II) complexes of the N,C,N'-terdentate-coordinating monoanionic "pincer" ligand, [PtX(4-E-2,6-[CH2NRR']2-C6H2](X=Cl, Br, I, tolyl; R, R'=Et, Me; E=H, OH, OSiMe2tBu) has been prepared. In the presence of sulfur dioxide, these complexes spontaneously adsorb this gas to form penta-coordinated adducts. Solid-state crystal-structure analyses of the SO2 adducts 8c (X=I, R=R=Me, E=OSiMe2tBu) and 11 (X=Cl, R=R'=Me, E=OH) show a square-pyramidal geometry around the metal center with SO2 in the apical position. Most interestingly. the adduct 11 forms similar Pt-Cl... H-O hydrogen-bonded alpha-type networks as the corresponding SO2-free complex 5. The conservation of the supramolecular information (hydrogen-bonded self-assembly) throughout a reaction (SO2 adsorption) is unprecedented in crystal engineering. Adduct formation in the solid state or in solution is fast and reversible and is indicated by a characteristic color change of the material from colorless to bright orange. Since facile methods have been developed to remove SO2 from the adducts and to regenerate the square-planar starting complexes, these complexes fulfill several essential prerequisites of sensor materials for repeated diagnostic SO2 detection. The platinum sensors have been found to be highly selective for sulfur dioxide and particularly sensitive for submilimolar to molar gas quantities. Their response capacity is tuneable by electronic and steric modifications of the ligand array by introduction of, for example, different substituents on the nitrogen donors. The periphery of dendrimers is shown to be an appropriate macromolecular support for anchoring the detection-active sites, thus allowing full recovery of the sensor materials for repeated use. By using this concept, metallo-dendrimers 3 and 15 have been prepared. Owing to the dendritic connectivity, these sensors are suitable for repetitive qualitative and quantitative detection of small amounts of SO2.     

Evaluation of alternatives to warfarin as probes for Sudlow site I of human serum albumin: characterization by high-performance affinity chromatography

Warfarin is often used as a site-specific probe for examining the binding of drugs and other solutes to Sudlow site I of human serum albumin (HSA). However, warfarin has strong binding to HSA and the two chiral forms of warfarin have slightly different binding affinities for this protein. Warfarin also undergoes a slow change in structure when present in common buffers used for binding studies. This report examined the use of four related, achiral compounds (i.e., coumarin, 7-hydroxycoumarin, 7-hydroxy-4-methylcoumarin, and 4-hydroxycoumarin) as possible alternative probes for Sudlow site I in drug binding studies. High-performance affinity chromatography and immobilized HSA columns were used to compare and evaluate the binding properties of these probe candidates. Binding for each of the tested probe candidates to HSA was found to give a good fit to a two-site model. The first group of sites had moderate-to-high affinities for the probe candidates with association equilibrium constants that ranged from 6.4 x 10(3)M(-1) (coumarin) to 5.5 x 10(4)M(-1) (4-hydroxycoumarin) at pH 7.4 and 37 degrees C. The second group of weaker, and probably non-specific, binding regions, had association equilibrium constants that ranged from 3.8 x 10(1)M(-1) (7-hydroxy-4-methylcoumarin) to 7.3 x 10(2)M(-1) (coumarin). Competition experiments based on zonal elution indicated that all of these probe candidates competed with warfarin at their high affinity regions. Warfarin also showed competition with coumarin, 7-hydroxycoumarin and 7-hydroxy-4-methycoumarin for their weak affinity sites but appeared to not bind and/or compete for all of the weak sites of 4-hydroxycoumarin. It was found from this group that 4-hydroxycoumarin was the best alternative to warfarin for examining the interactions of drugs at Sudlow site I on HSA. These results also provided information on how the major structural components of warfarin contribute to the binding of this drug at Sudlow site I.     

Surface modification of titanium with thermally treated polydimethylsiloxane coating and the effect on resin to titanium adhesion

In this study, titanium surface modification by a thermal treatment using a polydimethylsiloxane (PDMS) coating was investigated. The surfaces of four titanium samples were surface treated by polishing, sandblasting, and coating with a PDMS with a thermal treatment at 800 and 1100 °C. The titanium surfaces were characterized by X‐ray photoelectron spectroscopy (XPS) and atomic force microscopy. The effect of the surface treatments on adhesion of resin to titanium was assessed by shear adhesion strength test. XPS analysis showed that there was a change of elemental composition of titanium surfaces after surface treatment. Binding energy shifts for Si2p and O1s were observed after sandblasting and thermally treated PDMS. Therefore, chemical states of Si and O were changed. Atomic force microscopy analysis revealed that the surface topography of the Ti samples was different, and surface roughness was increased after sandblasting and thermal treatment of PDMS coating. Shear adhesion strength test results showed that the adhesion between resin and titanium is affected by the treatment temperature of PDMS coating. The highest adhesion is obtained at 1100 °C (14.7 ± 1.57 MPa). Copyright © 2014 John Wiley & Sons, Ltd.     

Spin quenching of Mn in complexes and CO binding with Mn deposited on MgO and CaO supports: DFT calculations

An attempt has been made to analyze the spin quenching properties of Mn, as a representative of transition metals, in Mn·MgO, Mn·CaO, OC·Mn·MgO, and OC·Mn·CaO complexes formed at the regular (001) surfaces of MgO and CaO, as well as the adsorption of CO on Mn deposited on MgO and CaO by means of hybrid density functional theory calculations and embedded cluster model. Clusters of moderate sizes were embedded in the simulated Coulomb fields that closely approximate the Madelung fields of the host surfaces. A test has been made to examine the effect of artificial flow of charge. While the spin states of Mn in Mn·MgO and Mn·CaO complexes are preserved, the combined effects of adsorbate and substrate in OC·Mn·MgO and OC·Mn·CaO complexes are strong enough to favor the low spin states and to quench the spin. The deposited Mn atoms enhance the adsorption of CO on MgO and CaO surfaces. The significant weakening of bond strength between OC and Mn in complexes supports the concept of bond order conservation. The relation between the strength of CO adsorption and the basicity of the support is verified. The natural bond orbital analysis reveals that the electronic structure of the adsorbed metal represents a qualitative change with respect to that of the free metal. The effects of spin contamination on the geometry, Mulliken charges, and adsorption energy are examined. The binding of CO precursor is dominated by the E(i)^Mn···CO pairwise additive components in MgO and CaO complexs, and the role of the support is not restricted to supporting the metal. The adsorbed CO molecules exhibit no remarkable deviation from linearity. Finally, relations are established between the process of spin quenching and the energy gaps between frontier orbitals. The results show that the spin state of adsorbed metal atoms on oxide supports and the role of precursor molecules on the magnetic and binding properties of complexes need to be explicitly taken into account. © 2012 Wiley Periodicals, Inc.     

Surface plasmon resonance as a tool for the estimation of adsorbed polymeric layer characteristics: Theoretical considerations and experiment

The potential application of Surface Plasmon Resonance (SPR) spectroscopy in evaluating the thickness and volume fraction of adsorbed macromolecular layers is discussed in this work. The sensitivity of SPR spectroscopy to different layer concentration and to the layer extension normal to the surface (thickness) is theoretically illustrated. A new approach for the interpretation of SPR data is presented, which is applicable whenever the functional form of the density profile is known. The use of the proposed procedure for the fitting of experimental results from PS‐PEO brush self‐assembly on alumina surface has allowed the determination of the layer parameters, which have been found to be in accordance with theoretical mean‐field and scaling predictions, being also in good agreement with previous results from neutron reflectivity experiments. Furthermore, it has been confirmed that the dependence of the brush layer thickness d on the molecular weight M_w obeys the scaling law d ～ M_w^0.63. Since surface plasmon measurements can be acquired quite fast, it is suggested that under the present analysis scheme, the technique may be implemented to probe the average conformational properties of adsorbed macromolecular layers during their formation or under external stimuli. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2060–2070, 2007     

Surface modification of hydrophobic NaYF_4:Yb,Er upconversion nanophosphors and their applications for immunoassay

β-NaYF4:Yb,Er upconversion nanophosphor (UCNP) is known as one of the most efficient NIR-to-visible upconversion materials, which shows great potential in bioanalytical chemistry and bioimaging. However, its applications are greatly limited due to its low water dispersibility and thus poor biocompatibility. In this paper, poly(acrylic acid) (PAA)-based ligand exchange strategies are carried out to modify oleic acid-capped hydrophobic β-NaYF4:Yb,Er UCNPs into hydrophilic ones. After efficient surface modific...     

Isothermal titration microcalorimetric method for studying the combined ligand binding with application to the binding of ethylurea and (N,N)dimethylurea on urease

A simple, novel method was introduced for determining equilibrium constants and enthalpies of binding of two different competitive ligands on a macromolecule by isothermal titration microcalorimetry technique. This method was applied to the simultaneous binding of ethylurea (I) and (N,N)dimethylurea (X), on jack-bean urease at pH 7.0 (tris-base; 30 mM) at 27°C. The dissociation equilibrium constants measured by this method were markedly consistent with inhibition constants obtained from assay of enzyme activities in the presence of I and X.     

Copper(II) complexes of methylated glycine derivatives: Effect of methyl substituent on their DNA binding and nucleolytic property

A set of copper(II) complexes of glycine and methylated glycine derivatives, Cu(aa)₂, consisting of C-dimethylglycine, l-alanine, N-dimethylglycine and sarcosine, was investigated for their DNA binding and nucleolytic properties by means of EPR and visible spectroscopy, and electrophoresis. They bind weakly to DNA with apparent binding constants in the range 1.8–2.9 × 10³ M⁻¹ with very similar orientation. No DNA cleavage is observed in the absence of exogenous agents. Copper(II) complexes of N-methylated derivatives bind to DNA more stereo-specifically and less strongly, and their oxidative DNA cleavage is less efficient than those of the corresponding C-methylated derivatives in the presence of hydrogen peroxide (H₂O₂) alone, or sodium ascorbate (NaHA) alone or tandem H₂O₂–NaHA. The oxidative DNA cleavage mechanism in the three systems involves a common copper(I) species. Neocuproine can inhibit DNA cleavage by these complexes.