New polyphenylene‐g‐polystyrene and polyphenylene‐g‐polystyrene/poly(ε‐caprolactone) copolymers by combined controlled polymerization and cross‐coupling processes

1,4‐Dibromo‐2‐(bromomethyl)benzene and 1,3‐dibromo‐5‐(bromomethyl)benzene were used as initiators in the atom transfer radical polymerization of styrene in conjunction with CuBr/2,2′‐bipyridine as a catalyst. The resulting polystyrene (PSt)‐based macromonomers, possessing at one end a 2,5‐dibromophenylene or 3,5‐dibromophenylene moiety, were used in combination with 2,5‐dihexylbenzene‐1,4‐diboronic acid for Suzuki coupling in the presence of Pd(PPh₃)₄ as a catalyst or with the system NiCl₂/2,2′‐bipyridine/triphenylphosphine/Zn for Yamamoto polymerization. Polyphenylenes (PPs) with PSt chains as substitution groups were obtained. The same macromonomers were used in Yamamoto copolycondensation reactions, in combination with a poly(ε‐caprolactone) (PCL) macromonomer, and this resulted in PPs with PSt/PCL side chains. The obtained PPs had good solubility properties in common organic solvents at room temperature similar to those of the starting macromonomers. The new polymers were characterized with ¹H (¹³C) NMR, IR, and gel permeation chromatography. The optical properties of the polymers were monitored with UV and fluorescence spectroscopy. The thermal behaviors of the macromonomers and final PPs were investigated with differential scanning calorimetry and compared. The morphology of PPs containing PSt and PCL blocks was characterized with atomic force microscopy, and a microphase‐separated layered morphology was observed. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 879–896, 2005     

Poly(thienyl‐phenylene)s with macromolecular side chains by oxidative polymerization of well‐defined macromonomers

Well‐defined polystyrene (PSt), poly(ε‐caprolactone) (PCL) or poly(2‐methyloxazoline) (POx) based polymers containing mid‐ or end‐chain 2,5‐ or 3,5‐dibromobenzene moieties were prepared by controlled polymerization methods, such as atom transfer radical polymerization (ATRP), ring opening polymerization (ROP), or cationic ring opening polymerization (CROP). These polymers were subsequently modified by Suzuki type coupling reactions with 2‐thiophene boronic acid. The resulting polymers, containing a conjugated sequence with 2‐thienyl groups at the extremities, could be further used as macromonomers in chemical oxidative polymerization in the presence of anhydrous FeCl₃. Poly(thienyl‐phenylene)s having the respective PSt or PCL chains as lateral subtituents were obtained in this way. All the starting, intermediate, or final polymers were structurally analyzed by spectroscopic methods (¹H and ¹³C NMR, IR) and gel permeation chromatography (GPC) measurements. Thermal behavior of the macromonomers and final polymers was investigated by differential scanning calorimetry (DSC) analyses. Optical properties of the polymers were monitored by UV and fluorescence spectroscopy. The emission spectra of the polymers show a clear bathochromic shift of the λ_max emission in all the cases with respect to the monomers because of the extending of the conjugation length. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 848–865, 2007.     

(Hetero) Arylene Polymers Having Polystyrene Chains as Branches

Summary : Four monomers; 1,4-bis(1-naphthyl) benzene ( 5 and 7 ) and 1,4-bis(2- thienyl)benzene ( 6 and 8 ) containing one or two polystyrene short chains substituted in 2 or 2, 5 positions of central phenylene ring were synthesized by Suzuki coupling reaction of two polystyrene based macromonomers ( 3 and 4 ) with 1-naphthalene- and 2-thiophene boronic acid, respectively. By chemical oxidative polymerization using FeCl₃ as oxidant, copolymers containing alternating phenylene and binaphthyl ( 9 , 11 ) or phenylene and bithienyl groups ( 10 , 12 ) and polystyrene as side chains have obtained. The exact control of polystyrene branch length was performed by atom transfer radical polymerization of styrene using as initiators 1,4 dibromo-2-(bromomethyl)benzene ( 1 ) and 1,4-dibromo-2,5 di(bromomethyl)benzene ( 2 ). Polymers were characterized by FT-IR, ¹H-NMR, UV and fluorescence spectroscopy and thermal methods.     

Synthesis and characterization of mid‐ and end‐chain functional telechelics by controlled polymerization methods and coupling processes

Well‐defined polystyrene‐ (PSt) or poly(ε‐caprolactone) (PCL)‐based polymers containing mid‐ or end‐chain 2,5 or 3,5‐ dibromobenzene moieties were prepared by controlled polymerization methods, such as atom transfer radical polymerization (ATRP) or ring opening polymerization (ROP). 1,4‐Dibromo‐2‐(bromomethyl)benzene, 1,3‐dibromo‐5‐(bromomethyl)benzene, and 1,4‐dibromo‐2,5‐di(bromomethyl)benzene were used as initiators in ATRP of styrene (St) in conjunction with CuBr/2,2′‐bipyridine as catalyst. 2,5‐Dibromo‐1,4‐(dihydroxymethyl)benzene initiated the ROP of ε‐caprolactone (CL) in the presence of stannous octoate (Sn(Oct)₂) catalyst. The reaction of these polymers with amino‐ or aldehyde‐functionalized monoboronic acids, in Suzuki‐type couplings, afforded the corresponding telechelics. Further functionalization with oxidable groups such as 2‐pyrrolyl or 1‐naphthyl was attained by condensation reactions of the amino or aldehyde groups with low molecular weight aldehydes or amines, respectively, with the formation of azomethine linkages. Preliminary attempts for the synthesis of fully conjugated poly(Schiff base) with polymeric segments as substituents, by oxidative polymerization of the macromonomers, are presented. All the starting, intermediate, or final polymers were structurally analyzed by spectral methods (¹H NMR, ¹³C NMR, and IR). © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 727–743, 2006     

Block and star block copolymers by mechanism transformation. VI. Synthesis and characterization of A4B4 miktoarm star copolymers consisting of polystyrene and polytetrahydrofuran prepared by cationic ring‐opening polymerization and atom transfer radical polymerization

The synthesis of A₄B₄ miktoarm star copolymers, where A is polytetrahydrofuran (PTHF) and B is polystyrene (PSt), was accomplished with orthogonal initiators and consecutive cationic ring‐opening polymerization (CROP) and atom transfer radical polymerization (ATRP). The compound formed in situ from the reaction of 3‐{2,2‐bis[2‐bromo‐2‐(chlorocarbonyl) ethoxy] methyl‐3‐(2‐chlorocarbonyl) ethoxy} propoxyl‐2‐bromopropanoyl chloride [C(CH₂OCH₂CHBrCOCl)₄] with silver perchlorate was used to initiate the CROP of tetrahydrofuran. The obtained polymer contained four secondary bromine groups at the α position to the original initiator sites and was used to initiate the ATRP of styrene with a CuBr/2,2′‐bipyridine catalyst to form a C(PTHF)₄(PSt)₄ miktoarm star copolymer. The miktoarm copolymer was characterized by gel permeation chromatography and ¹H NMR. The macroinitiator C(PTHF)₄Br₄ was hydrolyzed to afford PTHF arms. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2134–2142, 2001     

Synthesis and structures of cooligo(lactone) macromonomers

Cooligo(lactone) macromonomers were prepared by cooligomerisation of (S,S)-3,6-dimethyl-1,4-dioxane-2,5-dione (L-lactide), 1-oxacyclohexane-2-one (δ-valerolactone) or 1-oxacycloheptane-2-one (ε-caprolactone), initiated by 2,2-bis[4-(2-hydroxy-3-methacryloyloxypropoxy)phenyl]-propane (BisGMA). Two different reaction ways were used for the synthesis: parallel reaction and step reaction of lactones and L-lactide. The macromonomers were characterised by differential scanning calorimetry (DSC), size exclusion chromatography (SEC), ¹H- and ¹³C-NMR spectroscopy and MALDI-TOF mass spectrometry. Cooligo(lactone) macromonomers prepared by parallel and by step reaction show different molecular structures resulting in different properties. Their glass transition temperatures depend on the molar ratio of lactide and lactone as well as on the degree of oligomerisation. Macromonomers with high amounts of L-lactide units are partially crystalline.     

Synthesis of soluble all-trans oligomers of 2,5-diheptyloxy-p-phenylenevinylene via olefin metathesis

In this paper we report on the synthesis of all-trans oligomers of 2,5-diheptyloxy-p-phenylenevinylene (2,5-diheptyloxy-PV) via olefin metathesis condensation of 2,5-diheptyloxy-1,4-divinylbenzene

1 The correct IUPAC name is 1,4-bis(heptyloxy)-2,5-divinylbenzene. The name 2,5-diheptyloxy-1,4-divinylbenzene is used in order to underline the structural similarity to 2,5-diheptyloxy-p-phenylenevinylene oligomers.

(2,5-diheptyloxy-DVB). The preparation of the monomer is also described. The Schrock type molybdenum alkylidene complex Mo(NPhMe₂)(CHCMe₂Ph)(OCMe[CF₃]₂)₂ was used as metathesis catalyst. The oligomer product obtained was characterized by means of ¹H NMR, IR and UV/Vis spectroscopy and gel permeation chromatography.     

Poly(styrene‐b‐tetrahydrofuran)/clay nanocomposites by mechanistic transformation

Synthesis of poly(styrene‐block‐tetrahydrofuran) (PSt‐b‐PTHF) block copolymer on the surfaces of intercalated and exfoliated silicate (clay) layers by mechanistic transformation was described. First, the polystyrene/montmorillonite (PSt/MMT) nanocomposite was synthesized by in situ atom transfer radical polymerization (ATRP) from initiator moieties immobilized within the silicate galleries of the clay particles. Transmission electron microscopy (TEM) analysis showed the existence of both intercalated and exfoliated structures in the nanocomposite. Then, the PSt‐b‐PTHF/MMT nanocomposite was prepared by mechanistic transformation from ATRP to cationic ring opening polymerization (CROP). The TGA thermogram of the PSt‐b‐PTHF/MMT nanocomposite has two decomposition stages corresponding to PTHF and PSt segments. All nanocomposites exhibit enhanced thermal stabilities compared with the virgin polymer segments. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2190–2197, 2009     

Synthesis of π-conjugated poly(arylene)s by polycondensation of 1,4-bis(3-methylpyridin-2-yl)benzene and aryl dibromides through regiospecific C-H functionalization process

On the basis of the Ru-catalyzed regiospecific direct double arylation of benzene rings possessing 3-methylpyridin-2-yl substituents to produce 1-aryl-2-(3-methylpyridin-2-yl)benzene derivatives, the synthesis of poly(p-phenylene) derivatives having 2,5-bis(3-methylpyridin-2-yl) substituents is described. The reaction of 1,4-bis(3-methylpyridin-2-yl)benzene with bromobenzene (2 equiv) was carried out in the presence of [RuCl₂(η⁶-C₆H₆)]₂ (5 mol %) in 1-methyl-2-pyrrolidone at 120°C for 24 h to produce 1,4-bis(3-methylpyridin-2-yl)-2,5-diphenylbenzene in 99% yield as a sole product. Neither 2,6-diphenylated nor further phenylated products was produced under the examined conditions. This regiospecific double arylation process was then applied to the synthesis of π-conjugated polymers by use of aryl dibromides such as 1,4-dibromobenzene, 2,7-dibromo-9,9-dihexylfluorene, and 2,5-dibromothiophene. For example, a polymer was obtained in 73% yield by using 1,4-dibromobenzene, whose M_n and M_w/M_n were estimated to be 3300 and 1.51, respectively. The bathochromic shift of the ultraviolet (UV)–visible absorption spectrum with respect to that of the model compound, 1,4-bis(3-methylpyridin-2-yl)-2,5-diphenylbenzene, indicated the extension of the π-conjugation. The blue fluorescence was also observed for the polymer upon the UV irradiation. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2771–2777     

Block and star block copolymers by mechanism transformation. I. Synthesis of PTHF‐PSt‐PTHF by the transformation of ATRP into CROP

Polystyrene (PSt) with end‐terminal bromine (Br‐PSt‐Br) was synthesized by the atom transfer radical polymerization of styrene with the difunctional initiator 1,2‐bis(2′‐bromobutyryloxy)ethane in combination with CuBr and bipyridine. The Br‐PSt‐Br reacted with silver perchlorate at −78 °C, and the resulting macromolecular initiator was used to initiate the polymerization of tetrahydrofuran. Triblock poly(tetrahydrofuran)‐polystyrene‐poly(tetrahydrofuran) (PTHF‐PSt‐PTHF) diol was obtained after propagation at −15 °C. The conversion of the polymerization was measured by gas chromatography. The structures of the triblock copolymer PTHF‐PSt‐PTHF diol were characterized by ¹H NMR and gel permeation chromatography. The mechanism of cationic ring‐opening polymerization is discussed. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 337–344, 2000     

Polyamides of 2,5-bis(amino methyl) 1,4-dioxane and dicarboxylic acids

Novel polyamides of 2,5-bis(amino methyl) 1,4-dioxane (cis/trans-BAMD) with adipic/sebacic acids and of 2,5-bis(carboxy methyl)/2,5-bis(carboxy) 1,4-dioxane with 1,6-hexane diamine have been prepared. Because of the slightly higher conformational flexibility of the 1,4-dioxane ring in comparison with that of the cyclohexane ring, the BAMD polyamides have lower T_g and T_m than the corresponding 1,4-bis(amino methyl) cyclohexane (BAMC) polyamides. The symmetry of the trans-dioxane moiety permits high crystallinity in the trans-BAMD polymers. The crystallinity T_g and T_m of the trans polymers are decreased with the incorporation of the cis-dioxane moiety which lacks a plane of symmetry. Because of the hydrophilic nature of the dioxane ring, t-BAMD-6 has good moisture-regain properties, yet is melt processable (T_m = 292°C).     

Synthesis of polybenzyls by Suzuki Pd-catalyzed crosscoupling of boronic acids and benzyl bromides: Model reactions and polyreactions

The palladium-catalyzed crosscoupling reaction of boronic acids and benzyl bromides can be used successfully for the preparation of benzyls in high yield. This C-C coupling reaction was optimized for the synthesis of polybenzyls by model reactions. Different reaction channels were observed here with meta- and para-bis(bromomethyl)benzenes. The main product with 1,3-bis(chloromethyl)benzene was the corresponding 1,3-dibenzylbenzene, but the main product with 1,4-bis(chloromethyl)benzene was the corresponding biaryl resulting from homocoupling of aromatic boronic acid. 1.3-Linked polybenzyls were synthesized based on the results of the model reactions. M̄_n's of 2 380 corresponding to a DP of 26 were found based on GPC. No structural defects were detected within the limits of detection.     

Synthesis of poly(p‐phenylene) macromonomers and multiblock copolymers

Rigid‐rod poly(4′‐methyl‐2,5‐benzophenone) macromonomers were synthesized by Ni(0) catalytic coupling of 2,5‐dichloro‐4′‐methylbenzophenone and end‐capping agent 4‐chloro‐4′‐fluorobenzophenone. The macromonomers produced were labile to nucleophilic aromatic substitution. The molecular weight of poly(4′‐methyl‐2,5‐benzophenone) was controlled by varying the amount of the end‐capping agent in the reaction mixture. Glass‐transition temperatures of the macromonomers increased with increasing molecular weight and ranged from 117 to 213 °C. Substitution of the macromonomer end groups was determined to be nearly quantitative by ¹H NMR and gel permeation chromatography. The polymerization of a poly(4′‐methyl‐2,5‐benzophenone) macromonomer [number‐average molecular weight (M_n) = 1.90 × 10³ g/mol; polydispersity (M_w)/M_n = 2.04] with hydroxy end‐capped bisphenol A polyaryletherketone (M_n = 4.50 × 10³ g/mol; M_w/M_n = 1.92) afforded an alternating multiblock copolymer (M_n = 1.95 × 10⁴ g/mol; M_w/M_n = 6.02) that formed flexible, transparent films that could be creased without cracking. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3505–3512, 2001     

Liquid crystalline,highly luminescent poly(2,5-dialkoxy-p-phenyleneethynylene)

A high-molecular-weight poly(2,5-dialkoxy-p-phenyleneethynylene) derivative has been prepared by the Heck reaction of 1,4-bis(2-ethylhexyloxy)-2,5-diiodobenzene and 1,4-diethynyl-2,5-dioctyloxybenzene. The highly luminescent polymer exhibits excellent solubility and can readily be processed into high-optical-quality films. The weight-average molecular weight M̄_w was 240000 g · mol⁻¹, with a polydispersity index of 2.9. Thermal analysis revealed a glass transition around 90°C, and an onset of chemical crosslinking at 130°C. The high M̄_w and the remarkable solubility enabled the preparation of liquid crystalline solutions of the new PPE.     

Synthesis,characterization and properties of a soluble polymer with a poly(phenylenevinylene) structure

Soluble poly(2,5-dialkoxy-1,4-phenylenevinylene) has been prepared via Stille coupling reaction between 2,5-dialkoxy-1,4-diiodobenzene and E-1,2-bis(tributylstannyl)-ethene in the presence of palladium complexes. Characterization of this material by means of ¹H and ¹³C nuclear magnetic resonance (NMR), ultraviolet/visible (UV/VIS) and infrared (IR) spectra is described. Molecular weights, determined by means of gelpermeation chromatography (GPC) analysis and referred to standard polystyrene, were in the range number-average molecular weights M _n = 2061–2544 and weight-average molecular weights M _w = 3347–3878. X-ray diffraction (XRD) analysis of the polymer showed semicrystalline structure. T_g = 57°C, transition to a stable smectic mesophase at 115°C and clearing point at 210°C were revealed by differential scanning calorimetry analysis, optical microscopy observation and XRD of the annealed polymer.     

Synthesis and application of polytetrahydrofuran-grafted polystyrene (PS-PTHF) resin supports for organic synthesis

Cross-linked polystyrene (PS) with polytetrahydrofuran (PTHF) chains were prepared for use in solid phase organic synthesis (SPOS). The resins were prepared from styrene, styrene-PTHF macromonomers and cross-linkers 1,4-bis[4-vinylphenoxy]butane or divinylbenzene by suspension polymerization. The styrene-PTHF macromonomers were prepared by cationic polymerization of 4-vinylbenzyl bromide and 4-(4-vinylphenoxy)butyl iodide activated by silver hexafluoroantimonate and 4-(5-hydroxypentyl)styrene activated by triflic anhydride. Alternatively, polytetrahydrofuran-grafted polystyrene (PS-PTHF) resins could also be directly prepared from 5-hydroxypentyl JandaJel by cationic polymerization using triflic anhydride as the initiator. These PS-PTHF resins exhibited good swelling characteristics across a wide spectrum of polar and non-polar solvents. These resins were used in the synthesis of 3-methyl-1-phenyl-2-pyrazolin-5-one, which requires β-ketoester formation at low temperature (−78 °C), resulting in good yield and product purity; whereas the same synthesis carried out on PEG-grafted PS (PS-PEG) resin resulted in incomplete synthesis.     

Controlling the formation of long‐subchain hyperbranched polystyrene from seesaw‐type AB2 macromonomers: Solvent polarity and solubility

Through atom transfer radical polymerization of styrene with 1,3‐dibromomethyl‐5‐propargyloxy‐benzene as initiator followed by the conversion of bromine end‐groups into azide end‐groups, well‐defined seesaw‐type polystyrene (PSt) macromonomers with two molecular weights (M_n = 8.0 and 28.0 k) were obtained. Thus, a series of long‐subchain hyperbranched (lsc‐hp) PSt with high overall molar masses and regular subchain lengths were obtained via copper‐catalyzed azide–alkyne cycloaddition click chemistry performed in THF and DMF, respectively. The polycondensation of seesaw‐type macromonomers was monitored by gel permeation chromatography. Because DMF is the reaction medium with higher polarity, click reaction proceeds more easily in DMF. Therefore, the growth of lsc‐hp PSt in DMF has faster rate than that in THF for the shorter seesaw‐type macromonomer (Seesaw‐8k). However, THF is the solvent with better solubility to PSt and leads to looser conformation of PSt chains. Thus, for the longer seesaw macromonomer (Seesaw‐28k), lsc‐hp PSt in THF has higher overall molar mass. As well, the self‐cyclization of seesaw‐type macromonomers also depends on both solvent and molar mass of macromonomer. The self‐cyclization degrees of Seesaw‐8k in DMF and THF are almost the same while that of Seesaw‐28k macromonomer is obviously lower in THF. The experimental results suggest a physical consideration to control the growth of hyperbranched polymers. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Fabrication of biodegradable poly(trimethylene carbonate) networks for potential tissue engineering scaffold applications

Biodegradable poly(trimethylene carbonate) (PTMC) networks were prepared by photopolymerization of linear (L)‐ and star (S)‐shaped PTMC macromonomers for potential tissue engineering scaffold applications. The L‐ (M_n, 6400) and S‐shaped (M_n, 5880) PTMC macromonomers were synthesized using 1,4‐butane diol and 2‐ethyl‐ 2‐hydroxyl‐propane‐1,3‐diol co‐initiated ring‐opening polymerization of trimethylene carbonate (TMC) in the presence of stannous octoate and subsequent acrylation with acryloyl chloride. Chemical structures of the PTMC macromonomers and their corresponding networks were characterized by ¹H NMR and ¹³C NMR spectroscopy. The human endothelial cell line, EA.hy926 was used to test the biocompatibility, cell adhesion, and proliferation behavior of both PTMC networks. The PTMC networks made from the S‐shaped macromonomers exhibited superior cell adhesion and proliferation behavior than those made of the linear macromonomers. Copyright © 2008 John Wiley & Sons, Ltd.     

Model studies on the structure of poly(amide oxime)s and their cyclodehydration reactions leading to poly(1,2,4-oxadiazole)s

To obtain an understanding of the low molecular weight character of wholly aromatic poly(1,4-arylene acyldiamide oxime)s (PAAs) having n-alkyloxymethyl side braches and the additional decrease in molecular weight during their cyclodehydration reaction leading to the corresponding poly(1,4-arylene-1,2,4-oxadiazole)s (PAOs), tautomeric structures of poly[1,4-phenylene-2,5-bis(n-octyloxymethyl)terephthaldiamide oxime] (C₈-PAA) were ¹H-NMR-spectroscopically investigated by using two model compounds: O,O'-dibenzoyl terephthaldiamide oxime (H-PAA-M, 4) and O,O'-dibenzoyl-2,5-bis(n-octyloxymethyl) terephthaldiamide oxime (C₈-PAA-M, 5). In solution H-PAA-M existed exclusively as oximino isomer, while C₈-PAA-M consisted only of imino tautomer and C₈-PAA contained both the oximino and imino form, the former being dominant in composition. It was found that the presence of imino tautomer caused serious effects both on the low molecular weight character of C₈-PAA and on the additional decrease in molecular weight during thermal cyclodehydration to C₈-PAO, whereas the presence of oximino tautomer showed practically little effect. A discussion on the results is provided from mechanistic viewpoint. © 1993 John Wiley & Sons, Inc.     

Efficient Emission of Ultraviolet Light by Solid State Organic Fluorophores: Synthesis and Characterization of 1,4-Dialkeny-2,5-dioxybenzenes

The design and development of organic luminophores that exhibit efficient ultraviolet (UV) fluorescence in the solid state remains underexplored. Here, we report that 1,4-dialkenyl-2,5-dialkoxybenzenes and 1,4-dialkenyl-2,5-disiloxybenzenes act as such UV-emissive fluorophores. The dialkenyldioxybenzenes were readily prepared in three steps from 2,5-dimethoxy-1,4-diacetylbenzene or 2,5-dimethoxy-1,4-diformylbenzene via two to four steps from 1,4-bis(diethoxyphosphonylmethyl)-2,5-dimethoxybenzene. The dialkenyldioxybenzenes emit UV light in solution (λ_em=350–387 nm) and in the solid state (λ_em=328–388 nm). In addition, the quantum yields in the solid state were generally higher than those in solution. In particular, the adamantylidene-substituted benzenes fluoresced in the UV region with high quantum yields (Φ=0.37–0.55) in the solid state. Thin films of poly(methyl methacrylate) doped with the adamantylidene-substituted benzenes also exhibited UV emission with good efficiency (Φ=0.27–0.45). Density functional theory calculations revealed that the optical excitation of the dialkenyldimethoxybenzenes involves intramolecular charge-transfer from the ether oxygen atoms to the twisted alkenyl-benzene-alkenyl moiety, whereas the dialkenylbis(triphenylsiloxy)benzenes were optically excited through intramolecular charge-transfer from the oxygen atoms and twisted π-system to the phenyl-Si moieties of each triphenylsilyl group.