Some thermodynamic properties of carboxylato-pentammine cobalt(III) ions

Measurements are reported on the thermodynamic properties for the acid ionisation of various carboxylato-pentammine cobalt(III) ions, where the organic ligand is a dicarboxylate ion ^?OCORCOOH. It is shown that the results can be correlated with the ionisation of the free acids, on the basis of a simple electrostatic model. Results are also reported on the enthalpies of hydrolysis of the same ions, obtained indirectly from the enthalpies of reaction with sodium sulphide. The results for the complexes of the dicarboxylic acids which were studied (maleato, phthalato, fumarato, succinato and malonato) are not very different, while the acetato complex is somewhat more unstable. There is some indication that the complexes which hydrolyse faster are also thermodynamically less stable.     

Linear chain aluminium(III) carboxymethylphosphonate with encapsulated ammonium ions

An aluminium carboxymethylphosphonate of composition (NH(4))(2)Al(H(1/2)O(3)PCH(2)CO(2))(2) has been prepared hydrothermally. The aluminium cation is chelated by six membered rings formed from bonding by both the carboxylate and phosphonate oxygens. These chelate rings in turn form larger eight membered rings by connecting to similar chelate groups to form chains running along the a-axis.     

Revised ionic radii of lanthanoid(III) ions in aqueous solution

A new set of ionic radii in aqueous solution has been derived for lanthanoid(III) cations starting from a very accurate experimental determination of the ion-water distances obtained from extended X-ray absorption fine structure (EXAFS) data. At variance with previous results, a very regular trend has been obtained, as expected for this series of elements. A general procedure to compute ionic radii in solution by combining the EXAFS technique and molecular dynamics (MD) structural data has been developed. This method can be applied to other ions allowing one to determine ionic radii in solution with an accuracy comparable to that of the Shannon crystal ionic radii.     

Equilibrium and structural studies of silicon(IV) and aluminium(III) in aqueous solution—10. A potentiometric study of aluminium(III) pyrocatecholates and aluminium(III) hydroxo pyrocatecholates in 0.6 M Na(Cl)

Equilibria between aluminium(III), pyrocatechol (1,2-dihydroxybenzene, H₂L) and OH⁻ were studied in 0.6 M Na(Cl) medium at 25°C. The measurements were performed as emf titrations (glass electrode) within the limits 1.5 ≤ − log[H⁺] ≤ 9; 0.0005 ≤ B ≤ 0.015 M; 0.006 ≤ C ≤ 0.03 M and 2 ≤ C/B ≤ 30 (B and C stand for the total concentrations of aluminium(III) and pyrocatechol respectively). All data can be explained with a main series of complexes: A1L⁺, log β_−2,1,1 = − 6.337 ± 0.005; A1L₂⁻, log β_−4,1,2 = −15.44 ± 0.017 and A1L₃³⁻, log β_−6,1,3 = − 28.62 ± 0.024 together with two minor species: Al(OH)L₂²⁻, log β_−5,1,2 = − 23.45 ± 0.079 and Al₃(OH)₃L₃, log β_−9,3,3 = − 29.91 ± 0.066. Of the two, the latter probably is a type of average composition complex principally occurring at low C/B quotients. The first acidity constant for pyrocatechol as determined in separate experiments is log β_−1,0,1 = − 9.198 ± 0.001. The standard deviations given are 3σ(log β p,q,r). Data were analyzed with the least squares computer program LETAGROPVRID. In a model calculation using kaolinite as solid phase, we compared the complexation ability of this system with that of the system Al³⁺-OH⁻-salicylic acid, reported earlier in this series.     

The stabilization of managese(III) by azide ions in aqueous solution

The evidences of spontaneous oxidation of Mn(II) by the dissolved oxygen in azide buffer medium, which is dependent on the N (-)(3)HN (3) concentration, suggested a formation of stable Mn(III) complexes due to marked colour changes. Spectrophotometric studies combined with coulometric generation of Mn(III), in presence of large excess of Mn(II), showed a maximum absorbance peak at 432 nm. The molar absorptivity increases with azide concentration (0.44-3.9 mol 1(-1)) from 3100 to 6300 mol(-1) 1 cm(-1), showing a stepwise complex formation. Potential measurements of the Mn(III) Mn(II) system in several azide aqueous buffers solutions: 1.0 x 10(-2) mol 1(-1) HN(3), (0.50-2.0 mol 1(-1)) N(-)(3) and 5.0 x 10(-2) mol 1(-1) Mn(II) and constant ionic strength 2.0 mol 1(-1), kept with sodium perchlorate, leads to the conditional potential, E(0')x, in several azide concentrations at 25.0 +/- 0.1 degrees C. Considering the overall formation constants of Mn(II) N (-)(3), from former studies, and the potential, E(0')s = 1.063 V versus SCE, for Mn(III) Mn(II) system in non-complexing media, it was possible to calculate the Fronaeus function, F(0)(L), and the following overall formation constants: beta(1) = 1.2 x 10(5) M(-1), beta(2) = 6.0 x 10(8) M(-2), beta(3) = (2.4 +/- 0.7) x 10(11) M(-3), beta(4) = (1.5 +/- 0.5) x 10(11) M(-4) and beta(5) = (9.6 +/- 0.8) x 10(11) M(-5) for the Mn(III) N (-)(3) complexes. These data give important support to understand the importance of Mn(II) and Mn(III) synergistic effect on the analytical method of S(IV) determination based on the Co(II) autoxidation.     

Iridium(III) catalyzed oxidation of iodide ions in aqueous acidic medium

Oxidation of iodide ions by K₃Fe(CN)₆, catalyzed by hydrogen ions obtained from hydrochloric acid was found to be further catalyzed by iridium(III) chloride. Rate, when the reaction is catalyzed only by the hydrogen ions, was separated from the rate when iridium(III) and H⁺ions both, catalyze the reaction. Reactions studied separately in the presence as well as in the absence of IrCl₃ under similar conditions were found to follow second order kinetics with respect to [I⁻]. While the rate showed direct proportionality with respect to [K₃Fe(CN)₆] and [IrCl₃]. At low concentrations the reaction shows direct proportionality with respect to [H⁺] which tends to become proportional to the square of hydrogen ions at higher concentrations. Strong retarding affect of externally added hexacyanoferrate(II) ions was observed in the beginning but further addition affects the rate to a little extent. Changes in [Cl⁻] and also ionic strength of the medium have no effect on the rate. With the help of the intercept of catalyst graph, the extent of the reaction, which takes place without adding iridium(III), was calculated and was found to be in accordance with the values obtained from the separately studied reactions in which only H⁺ ions catalyze the reaction. It is proposed that iridium forms a complex, which slowly disproportionates into the rate-determining step. Thermodynamic parameters at four different temperatures were calculated.     

Synthesis and some properties of furylacrylates of aluminium(III) and titanium(IV)

Summary Compounds of the type [M(OPrⁱ)_m–n(FA)_n] (where m = 3 and n = 1 to 3 when M = Al; and m = 4 and n = 1 to 4 when M = Ti) have been synthesised by the reactions of aluminium and titanium isopropoxides with furylacrylic acid (HFA) in benzene. The corresponding tertiary butoxide derivatives, [M(OBu^t)_m–n(FA)_n], were also obtained by the alcohol-interchange technique. These compounds have been characterised by elemental analysis, and i.r. and p.m.r. spectra.     

Determination of iron(III) ions in aqueous solutions by secondary-emission mass spectrometry

Model aqueous solutions containing micro impurities of iron(III) are studied by secondary-emission mass spectrometry. The possibility of using this method for the analysis of rain deposits and samples of atmospheric aerosols is discussed.     

Sorption of thallium(III) ions from aqueous solutions using titanium dioxide nanoparticles

Titanium dioxide nanoparticles (NPs) were employed for the sorption of Tl(III) ions from aqueous solution. The process was studied in detail by varying the sorption time, pH, Tl(III) concentration, temperature, and amount of sorbent. The sorption was found to be fast and to reach equilibrium within 2 min, to be less efficient at low pH values, and to increase with pH and temperature. The sorption fits the Langmuir equation and follows a pseudo second order model. The mean energy of the sorption is approximately 15 kJ mol^?1 as calculated from the Dubinin–Radushkevich isotherm. The thermodynamic parameters for the sorption were also determined, and the ΔH ⁰ and ΔG ⁰ values indicate endothermic behavior.     

The system aluminium(III)-dipicolinic acid in aqueous 0.5M sodium erchlorate medium

A potentiometric and spectrophotometric investigation on the formation of aluminium(III) complexes with dipicolinic (2,6-pyridinedicarboxylic) acid at 25 degrees in aqueous 0.5M NaClO(4) medium is reported. The values of the cumulative formation constants of the two acid species HL(-) and H(2)L are log ss(1) = 4.532 +/- 0.004 and log ss(2) = 6.624 +/- 0.006. At pH < 4 and in the investigated concentration range (0.242 C(m) 0.975 mM,3.16 C(l) 5.27 mM), aluminium(III) forms two mononuclear complexes, one positively charged, with a metal/ligand molar ratio of 1:1, and the other negatively charged, with a metal/ligand molar ratio of 1:2. The two methods of investigation have yielded the following values for the cumulative formation constants: log beta(1(pot)) = 4.87 +/- 0.02; log beta(2(pot)) = 8.32 +/- 0.02 log beta(1(sp)) = 4.85 +/- 0.03. A precipitate occurs at pH 5-6. A paper electrophoretic investigation and comparison with the behaviour of the well-known iron(III) complexes, supports these findings.     

Stability constants of the aqueous mono-fluoride complexes of Pu(III) and Am(III) and their correlation with other metal ions

The stability constants of the aqueous mono-fluoride complexes of Pu(III) and Am(III) have been measured using the distribution method. A correlation of the available stability constants of fluoride complexes of trivalent actinides, up to Cf, with fundamental properties like charge and radii of the metal ion has been discussed. Good correlation within the group and as a part of other metal ions was obtained only for transplutonium elements. The reported stability constant values measured by potentiometry and the value obtained by distribution for Pu³⁺ appear to be much higher than expected from this correlation. However, a better correlation was obtained with transplutonium elements when effective charge instead of formal charge was considered for Pu³⁺ in the BSE function.     

Sorption of Cu(II) and Eu(III) ions from aqueous solution by olive cake

The sorption of Cu(II) on olive cake, a biomass by-product of olive oil production, has been investigated by potentiometry at pH 6, I=0.1 M NaClO₄, 25 °C and under atmospheric conditions. Numerical analysis of the experimental data supports the formation of surface complexes and allows the evaluation of the corresponding formation constant, which is found to amount log β=5.1±0.4. This value is close to corresponding values given in literature for Cu(II)-humate complexes, indicating that the same type of active sites (e.g. carboxylic and phenolic groups) is responsible for the Cu(II) binding by olive cake. Addition of a competing metal ion (e.g. Eu(III) ion) in the system leads to replacement of the Cu(II) by Eu(III). Evaluation of the potentiometric data obtained from competition experiments indicates on a ionexchange mechanism. The formation constant of the Eu(III) species sorbed on olive cake is found to be log β=5.4±0.9. The results of this study are of particular interest with respect to waste water treatment technologies using biomass products as adsorbent material and environmental impact assessments regarding disposal of biomass by products in the geosphere.     

Interactions of silicate ions with zinc(II) and aluminum(III) in alkaline aqueous solution

We present (29)Si, (27)Al, and (67)Zn NMR evidence to show that silicate ions in alkaline solution form complexes with zinc(II) (present as zincate, Zn(OH)(3)(-) or Zn(OH)(4)(2-)) and, concomitantly, with aluminate (Al(OH)(4)(-)). Zincate reacts with monomeric silicate at pH 14-15 to form [(HO)O(2)Si-O-Zn(OH)(3)](4-) and with dimeric silicate to produce [HO-SiO(2)-O-SiO(2)-O-Zn(OH)(3)](6-). The exchange of Si between these free and Zn-bound sites is immeasurably fast on the (29)Si NMR time scale. The cyclic silicate trimer reacts relatively slowly and incompletely with zincate to form [(HO)(3)Zn{(SiO(3))(3)}](7-). The concentration of the cyclic trimer becomes further depleted because zincate scavenges the silicate monomer and dimer, with which the cyclic trimer is in equilibrium on the time scale of sample preparation. Identification of these zincate-silicate complexes is supported by quantum chemical theoretical calculations. Aluminate and zincate, when present together, compete roughly equally for a deficiency of silicate to form [(HO)(3)ZnOSiO(2)OH](4-) and [(HO)(3)AlOSiO(2)OH](3-) which exchange (29)Si at a fast but measurable rate.     

Spectroscopic properties of neodymium(III)-containing polyoxometalates in aqueous solution

The spectroscopic properties of the neodymium(III)-containing polyoxometalates (POMs) [Nd(PW(11)O(39))(2)](11-), [Nd(PMo(2)W(9)O(39))(2)](11-), [Nd(PMo(4)W(7)O(39))(2)](11-), [Nd(PMo(6)W(5)O(39))(2)](11-), [Nd(SiMo(2)W(9)O(39))(2)](13-), [Nd(P(2)W(17)O(61))(2)](17-), [NdW(10)O(36)](9-), [NdP(5)W(30)O(110)](12-) and [NdAs(4)W(40)O(140)](25-) are described. Absorption spectra of aqueous solutions of the complexes have been recorded and the transition intensities are parameterised in terms of the Judd-Ofelt intensity parameters Omega(lambda) (lambda=2, 4, 6). Marked differences were found between the luminescence lifetimes of the complexes of the type Nd(POM) and those of the type Nd(POM)(2), due to a better shielding of the neodymium(III) ions from the bulk water molecules in the latter type of complexes.     

Decomposition of pentaammineaquacobalt(III) perchlorate under laser radiation action

Photolytic decomposition of the complex [Co(NH₃)₅(H₂O)](ClO₄)₃ under the action of a laser with a wavelength of 355 nm, which is resonant in energy to the energy of the (¹ A _1g → ¹ T _2g ) d–d transition, was studied. Decomposition of the complex is accompanied by a release of ammonia with its subsequent oxidation to nitrogen oxides and by partial cobalt reduction with the formation of the mixed cobalt(II, III) oxide Co₃O₄.     

Spectral and kinetic properties of the radical ions of chloroboron(III) subnaphthalocyanine

Both the radical anion and radical cation of the chloroboron(III) subnaphthalocyanine (SubNc) cone-shaped macrocycle have been photochemically produced and their kinetics and absorption spectra have been characterised. SubNc is more prone to oxidation but less prone to reduction than its higher homologue, the chloroaluminium(III) phthalocyanine (Pc). Given the higher triplet quantum yield of SubNc compared to Pc, SubNc emerges as a very good photosensitiser for triplet-mediated reduction processes. The radical-ion spectra follow the same patterns found for Pcs, namely absorption bands at longer wavelengths than those of the singlet and triplet excited states.     

The magnetothermal properties of substituted (tetraazoporphynato)manganese(III) in aqueous suspension

The magnetocaloric effect (MCE), heat capacity, and enthalpy and entropy of magnetization of the high-spin (acetato)(2,3,7,8,12,13,17,18-octa-para-tert-butylphenyltetraazaporphynato)manganese(III) complex in a 6% aqueous suspension were determined microcalorimetrically at 298 K in magnetic fields of 0.1–1.0 T, that is, under the conditions comparable with those used with (2,3,7,8,12,13,17,18-octaethylporphynato)chloromagnanese(III) studied earlier. High-dispersity complex particles were found to have paramagnetic properties. Positive MCE values were obtained. These values grew as magnetic field induction increased. MCE sensitivity to the nature and electronic structure of the aromatic macroring was studied. The presence of aza groups in the structure of the complex decreases the MCE value compared with the porphyrin complex. The specific heat capacity of the complex strongly depended on the magnetic field value; field dependences had a maximum close to 0.3 T. Changes in the ΔS _m(H, T) molar entropy part were also extremal and had maxima at 0.3–0.4 T. Prospects for the use of magnetothermal properties in the quantitative determination of thermodynamic characteristics and for revealing trends of changes in the magnetic activity of porphyrin complexes are discussed.