Properties of Star-Branched Polymer Chains Near a Surface

We considered two model systems of star-branched polymers near an impenetrable surface. The model chains were constructed on a simple cubic lattice. Each star polymer consisted of f = 3 arms of equal length and the total number of segments was up to 799. The excluded volume effect was included into these models only and therefore the system was studied at good solvent conditions. In the first model system polymer chain was terminally attached with one arm to the surface. The grafted arm could slide along the surface. In the second system the star-branched chain was adsorbed on the surface and the strength of adsorption was were varied. The simulations were performed using the dynamic Monte Carlo method with local changes of chain conformations. The internal and local structures of a polymer layer were determined. The lateral diffusion and internal mobility of star-branched chains were studied as a function of strength of adsorption and the chain length. The lateral diffusion and internal mobility of star-branched chains were studied as a function of strength of adsorption and the chain length. It was shown that the behavior of grafted and weakly adsorbed chains was similar to that of a free three-dimensional polymer, while the strongly adsorbed chains behave as a two-dimensional system.     

Properties of star-branched polymer brushes

A simple model of a polymer brush was constructed. The star polymers with three arms were terminally attached with one arm (the stem) to an impenetrable surface with the other two arms (branches) free. The excluded volume effect was included into the model as the only interaction. Therefore, the system was studied in good solvent conditions. The simulations were carried out by means of the dynamic Monte Carlo method using the local changes of chain conformations to sample efficiently the conformational space. The influence of both the number of chains (the grafting density) and the length of chains on the static properties of the polymer brush was studied. The internal and local structure of a formed polymer layer was determined. It was shown that the size of the stems increased rapidly with the increase of the grafting density, while the size of the branches diminished. The changes of the spatial orientations of the stems and the branches for different grafting densities were shown and discussed.     

Properties of simple models of polymer networks. A Monte Carlo simulation

A model polymer network was constructed from branched chains. Each chain was built on a simple cubic lattice forming a star-branched polymer consisting of f = 3 arms of equal lengths. The fragment of network under consideration consisted of 1, 2 and 3 star polymers with different topology of connections. The only potential used was excluded volume (athermal chains). The properties of the network were determined by the means of computer simulations using the classical Metropolis sampling algorithm (local micromodifications of chain conformation). The behaviour of linear chains of the same molecular weight was also studied as a state of reference. The influence of attaching the next star-branched chain to the network on its static and dynamic properties was studied. The short-time dynamic behaviour of chain fragments was determined and discussed.     

Molecular dynamics simulations of grafted polyelectrolytes on two apposing walls

Molecular dynamics simulations of polyelectrolytes grafted to two apposing surfaces were performed. Bead-spring polymer models are used to treat flexible chains [e.g., sodium poly(styrene sulfonate)] and stiff chains (double-stranded DNA). The counterions are explicitly treated. The effect of the surface density of the grafted polymer, the chain length, and the gap width on the structure and the pressure were studied. Results are compared to experimental measurements and to simulations of polyelectrolyte brushes on a single surface. The density profiles exhibit a maximum not found in single surface data. The maximum is due to the brushes shrinking to avoid interpenetration.     

Superselective Adsorption of Multivalent Polymer Chains to a Surface with Receptors

Multivalent polymer chains exhibit excellent prospect in biomedical applications by serving as therapeutic agents. Using three-dimensional (3D) Langevin dynamics simulations, we investigate adsorption behaviors of multivalent polymer chains to a surface with receptors. Multivalent polymer chains display superselective adsorption. Furthermore, the range of density of surface receptors at which a multivalent polymer chain displays a superselective behavior, narrows down for chains with higher density of ligands. Meanwhile, the optimal density of surface receptors where the highest superselectivity is achieved, decreases with increasing the density of ligands. Then, the conformational properties of bound multivalent chains are studied systematically. Interestingly, we find that the equilibrium radius of gyration R_g and its horizontal component have a maximum as a function of the density of surface receptors. The scaling exponents of R_g with the length of chain suggest that with increasing the density of surface receptors., the conformations of a bound multivalent polymer chain first fall in between those of a two-dimensional (2D) and a 3D chain, while it is slightly collapsed subsequently.     

Dynamics of star branched polymers in a matrix of linear chains — a Monte Carlo study

A simple cubic lattice model of the melt of 3-arm star-branched polymers of various length dissolved in a matrix of long linear chains (n₁ = 800 beads) is studied using a dynamic Monte Carlo method. The total polymer volume fraction is equal to 0,5, while the volume fraction of the star polymers is about ten times smaller. The static and dynamic properties of these systems are compared with the corresponding model systems of isolated star-branched polymers and with the melt of linear chains. It has been found that the number of dynamic entanglements for the star polymers with arm length up to 400 segments is too small for the onset of the arm retraction mechanism of polymer relaxation. In this regime dynamics of star-branched polymers is close to the dynamics of linear polymers at corresponding concentration and with equivalent chain length. The entanglement length for star polymers appears to be somewhat larger compared with linear chains.     

Structure and transport properties of polymer grafted nanoparticles

We perform molecular dynamics simulations on a bead-spring model of pure polymer grafted nanoparticles (PGNs) and of a blend of PGNs with a polymer melt to investigate the correlation between PGN design parameters (such as particle core concentration, polymer grafting density, and polymer length) and properties, such as microstructure, particle mobility, and viscous response. Constant strain-rate simulations were carried out to calculate viscosities and a constant-stress ensemble was used to calculate yield stresses. The PGN systems are found to have less structural order, lower viscosity, and faster diffusivity with increasing length of the grafted chains for a given core concentration or grafting density. Decreasing grafting density causes depletion effects associated with the chains leading to close contacts between some particle cores. All systems were found to shear thin, with the pure PGN systems shear thinning more than the blend; also, the pure systems exhibited a clear yielding behavior that was absent in the blend. Regarding the mechanism of shear thinning at the high shear rates examined, it was found that the shear-induced decrease of Brownian stresses and increase in chain alignment, both correlate with the reduction of viscosity in the system with the latter being more dominant. A coupling between Brownian stresses and chain alignment was also observed wherein the non-equilibrium particle distribution itself promotes chain alignment in the direction of shear.     

Stiffness and excluded volume effects on conformation and dynamics of polymers: A simulation study

This work investigates the effects of the excluded volume and especially those of the chain stiffness on the structural and dynamical properties of a model polymer chain.The theoretical framework is the same as in the recent works by Steinhauser et al.,where a Rouse approach is adopted.Our model differs in that our chains have a finite average bending angle.As in the works by Steinhauser et al.,Langevin dynamic simulations were performed without hydrodynamic interactions.Whereas this doesn’t impact the static properties we obtain,it also allows us to compare our results on dynamic properties to those predicted by Rouse theory,where hydrodynamic interactions are also neglected.Our results show that the structural properties are very sensitive to the chain stiffness,whereas the dynamic scaling laws remain the same as those by Rouse theory,with the prefactor depending on the persistence length.     

Molten globule state in homopolymers:A Monte Carlo study

Simple models of polymer chains were based on a simple cubic lattice. The model chains were star‐branched with f = 3 and f = 6 branches. The attractive potential between polymer segments was introduced to study the properties of polymer chains in the different temperature regimes. The computer simulations were carried out by means of the dynamic Monte Carlo method. It was found that contrary to recent real experiments, the ratio of the radius of gyration to the hydrodynamic radius did not exhibit a maximum near the coil‐globule transition but decreased monotonically with the temperature. The distribution of polymer‐polymer contacts and their lifetimes were also studied. It appeared that in homopolymer chains the lifetimes of these contacts were very short. At low temperatures contacts were distributed over the entire chain and at high temperatures only contacts that were close to the chain survived longer times.     

Computer Simulation of Adsorbed Polymer Chains with a Different Molecular Architecture

Simulations of simple models of polymer chains were carried out by the means of the dynamic Monte Carlo method. The model chains were confined to a simple cubic lattice. Three different chain architectures were studied: linear, star‐branched and ring chains. The polymer model chain interacted with an impenetrable surface with a simple contact attractive potential. It was found that size parameters of all these polymers obey scaling laws. The temperatures of the transitions from weakly to strongly adsorbed chain were determined. It was shown for weakly adsorbed chains that ring polymers are always ca. 50% more adsorbed than linear and star‐branched ones. The properties of adsorbed linear and star‐branched polymers are very similar in the length of chain and the strength of adsorption studied. Strongly adsorbed ring polymers are still more adsorbed but differences between all kinds of chains become less pronounced.     

Properties of branched confined polymers

A model of star-branched polymer chains confined in a slit formed by two parallel surfaces was studied. The chains were embedded to a simple cubic lattice and consisted of f=3 branches of equal length. The macromolecules had the excluded volume and the confining surfaces were impenetrable for polymer segments. No attractive interactions between polymer segments and then between polymer segments and the surfaces were assumed and therefore the system was a thermal. Monte Carlo simulations were carried out employing the sampling algorithm based on chain's local changes of conformation. Lateral diffusion of star-branched chains was studied. Dynamic properties of star-branched chains between the walls with impenetrable rod-like obstacles were also studied and compared to the previous case. The density profiles of polymer segments on the slit were determined. The analysis of contacts between the polymer chain and the surfaces was also carried out.     

Structure of Adsorbed Polymer Chains: A Monte Carlo Study

The structure of adsorbed polymer chains was studied using simplified lattice models. The model chains were adsorbed on an impenetrable surface with an attractive potential. The dynamic Monte Carlo simulations based in the Metropolis scheme were carried out using these models. The influence of the internal chain architecture (linear, star‐branched and ring chains) and the degree of adsorption on the chain's structure was studied. It was shown that for weakly adsorbed chain regime the ring polymers which exhibit an almost twice as high degree of adsorption compared to linear and star chains have a higher number of adsorbed parts of chain (trains). But the length of such train remains almost the same for all types of a polymer chain. Star‐branched chains exhibit a slightly different change in number and the mean length of trains, loops and tails with the temperature and the chain total length compared to two other types of chain.     

Static and dynamic properties of the interface between a polymer brush and a melt of identical chains

Molecular-dynamics simulations of a short-chain polymer melt between two brush-covered surfaces under shear have been performed. The end-grafted polymers which constitute the brush have the same chemical properties as the free chains in the melt and provide a soft deformable substrate. Polymer chains are described by a coarse-grained bead-spring model, which includes excluded volume and backbone connectivity of the chains. The grafting density of the brush layer offers a way of controlling the behavior of the surface without altering the molecular interactions. We perform equilibrium and nonequilibrium molecular-dynamics simulations at constant temperature and volume using the dissipative particle dynamics thermostat. The equilibrium density profiles and the behavior under shear are studied as well as the interdigitation of the melt into the brush, the orientation on different length scales (bond vectors, radius of gyration, and end-to-end vector) of free and grafted chains, and velocity profiles. The obtained boundary conditions and slip length show a rich behavior as a function of grafting density and shear velocity.     

Dynamics of Adsorbed Star‐Branched Polymer Chains: A Computer Simulation Study

The simple cubic‐lattice model of polymer chains was used to study the dynamic properties of adsorbed, branched polymers. The model star‐branched chains consisted of f = 3 arms of equal lengths. The chain was modeled with excluded volume, that is, in good solvent conditions. The only interaction assumed was a contact potential between polymer segments and an impenetrable surface. This potential was varied to cover both weak and strong adsorption regimes. The classical Metropolis sampling algorithm was used for models of star‐branched polymers in order to calculate the dynamic properties of adsorbed chains. It was shown that long‐time dynamics (diffusion constant) and short‐time dynamics (the longest relaxation time) were different for weak and strong adsorption. The diffusion of weakly adsorbed chains was found to be qualitatively the same as for free nonadsorbed chains, whereas strongly adsorbed chains behaved like two‐dimensional polymers. The time‐dependent properties of structural elements such as tails, loops, and trains were also determined.

The mean lifetimes of tails, loops, and trains versus the bead number for the chain with N = 799 beads for the case of the weak adsorption ε_a = −0.3.     

Star-branched polymers in an adsorbing slit: a Monte Carlo study

A coarse-grained model of star-branched polymer chains confined in a slit was studied. The slit was formed by two parallel impenetrable surfaces, which were attractive for polymer beads. The polymer chains were flexible homopolymers built of identical united atoms whose positions in space were restricted to the vertices of a simple cubic lattice. The chains were regular star polymers consisted of f = 3 branches of equal length. The chains were modeled in good solvent conditions and, thus, there were no long-range specific interactions between the polymer beads-only the excluded volume was present. Monte Carlo simulations were carried out using the algorithm based on a chain's local changes of conformation. The influence of the chain length, the distances between the confining surfaces, and the strength of the adsorption on the properties of the star-branched polymers was studied. It was shown that the universal behavior found previously for the dimension of chains was not valid for some dynamic properties. The strongly adsorbed chains can change their position so that they swap between both surfaces with frequency depending on the size of the slit and on the temperature only.     

A Monte Carlo simulation of grafted poly(ethylene oxide) chains

Conformational changes of a simplified model of grafted poly(ethylene oxide) (PEO) chains were simulated using an off-lattice Monte Carlo model. A random-walk scheme was used in our simulations. The initial polymer structure was modeled with molecular mechanics and models of grafted polymer chains were built using programs developed in our laboratory. During the simulation, all bond angles and bond lengths were kept fixed while the dihedral angles of backbones were changed to search for energy-favorite conformations. Torsional energy, van der Waals interaction, and Coulombic interaction were considered. Periodic boundary conditions were implemented. In addition, the solvent quality was simulated implicitly by modifying the Lennard-Jones 12–6 van der Waals expression. Each PEO chain, 50-monomer long, was represented with a united-atom model. Eight series of simulations with varying solvent quality, simulation temperature, and Coulombic interaction were carried out. For each series, nine different initial grafting densities of grafted PEO chains were considered. Five different conformations were simulated at each grafting density. The calculated system energies, scaling properties, and atom density profiles were studied. Changes in solvent quality produced different structural behaviors. As the grafting density increased, there was a mushroom-to-brush transition, and the scaling property of average layer thickness was dependent on the grafting density.     

Simulation of Copolymer Bottle-Brushes

Summary: The structure of bottle-brush polymers with a rigid backbone and flexible side chains is studied in three dimensions, varying the grafting density, the side chain length, and the solvent quality. Some preliminary results of theoretical scaling considerations for one-component bottle-brush polymers in a good solvent are compared with Monte Carlo simulations of a simple lattice model. For the simulations a variant of the pruned-enriched Rosenbluth method (PERM) allowing for simultaneous growth of all side chains in the Monte Carlo sampling is employed. For a symmetrical binary (A,B) bottle-brush polymer, where two types (A,B) of flexible side chains are grafted with one chain end to the backbone in an alternating way, varying repulsive binary interactions between unlike monomers and the solvent quality, it is found that phase separation into an A-rich part of the cylindrical molecule and a B-rich part can occur only locally. Long range order (in the direction of the backbone) does not occur, and hence the transition from the randomly mixed state of the bottle-brush to the phase-separated structure is strongly rounded, in contrast to the corresponding mean field predictions of a sharp transition to a “Janus cylinder” phase-separated structure. This lack of a phase transition can be understood from an analogy with spin models in one dimension. By estimating the correlation length for this phase separation along the backbone as a function of side chain length and solvent quality, we present strong evidence that no sharp phase transition occurs.     

Stochastic dynamics simulation of grafted polymer brushes under shear deformation

We present results of computer simulations of polymer brushes (layers of polymer chains attached at one end onto an impermeable planar surface) under shear deformation at constant shear rate. As the first stage of calculations the behavior of a single brush was studied. The monomer density profile, the distribution of the chain ends, the positions and orientations of different monomers along the chain were calculated. Dimensions of the polymer chains as functions of the shear rate were obtained for different grafting densities. An increase in the brush thickness over the grafting plane with an increase in the shear rate as predicted by the theory of Barrat was observed. However, the magnitude of the effect appears to be small. We explain this by finite extensibility of the grafted chains.     

Manifestation of side-chain interactions in solution properties of “loose” PI-graft-PMMA molecular brushes

The molecular properties of polymer brushes composed of polyimide with polymerization degree 50 and loosely grafted poly(methyl methacrylate) chains of variable length (PI-graft-PMMA) were studied by viscometry, dynamic light scattering, and equilibrium electro-optical Kerr effect methods in a diluted solution. It was established that the intrinsic viscosity and hydrodynamic dimension of PI-graft-PMMA copolymers increase when the electro-optical Kerr constant decreases with the elongation of PMMA side chains in the range of 40–110 monomer units. The observed difference in the solution properties of the copolymers was explained by their side-chain interactions in spite of a large distance between the neighboring grafting points typical of “loose brushes.” A strong effect of the chain rigidity and dipole structure on solution properties of the studied samples was demonstrated. The Kuhn segment lengths for PI-graft-PMMA copolymers were estimated to vary in the range 3.8–12.1?nm.     

用原子力显微镜研究甲基丙烯酸缩水甘油酯在高密度聚乙烯表面的紫外接枝

利用AFM研究了紫外光引发甲基丙烯酸缩水甘油酯(GMA)在高密度聚乙烯(HDPE)表面接枝初期生成的接枝物的微结构, 对HDPE表面接枝反应的引发速率进行了初步研究. 紫外照射30 s后在HDPE表面形成一些接枝物微粒, 随着照射时间的增加, 微粒越来越多, 其体积也越来越大. 分析结果表明, 每一个接枝物微粒即为一个高度枝化甚至超级枝化的接枝聚合物链. 在30~45 s之间, 接枝密度随照射时间延长几乎呈线性增长; 在45 s后, 接枝密度的增长速度减慢. 在30~45 s之间的引发速度约为6.5 Unit/(μm2·s).