Scratch resistance and weatherfastness of uv-curable clearcoats

UV-cuing has found an increasing number of industry allocations over the past decade due to its unique benefits, e.g. solvent free formulations, high cure speed and low temperature processing. In addition to these benefits two additional properties of uv-cured coatings are of today's interest, especially in the automotive industry: scratch resistance and resistance against chemicals. One of the most important requirements for a broad use of uv-curable coatings in the coating industry is that coatings are stable against degradation caused by atmospheric influences since coatings for outdoor use are subject to especially harsh weathering conditions, e.g. uv-light, oxygen, moisture and air pollutants. This weathering leads to a degradation of the polymeric binder. Clearcoats containing photoinitiators based on bis-acylphosphinoxide (“BAPO”) and a combination of hydroxyphenyl-s-triazine uv-absorber and a sterically hindered amine as a light stabilizer package show a very good curing behavior as well as an improved weatherfastness over a long period of time and a good scratch and chemical resistance.     

Functional polymers for colloidal applications. V. Novel behavior of polymeric emulsifiers in emulsion polymerization

The polymeric emulsifier poly(dodecyl acrylate-co-acrylic acid) [i.e., the sodium salt (PDA)] and monomeric emulsifier sodium dodecyl glutarate (SDG) have been synthesized. PDA and SDG are used as emulsifiers in the emulsion polymerization of styrene with both the water-soluble initiator potassium persulfate (K₂S₂O₈) and the oil-soluble initiator 2,2′-azobisisobutyronitrile (AIBN). The PDA/K₂S₂O₈ system showed a bimodel distribution of particle sizes (2 and 0.05 μm). A bimodel particle distribution was also found for the PDA/AIBN system, but the distribution for the large particles was wide (0.1–10 and 0.07 μm). The SDG/K₂S₂O₈ system displayed only one kind of particle size (0.05 μm), but the SDG/AIBN system also showed a bimodel distribution of particle sizes (0.05 and 5 μm). These bimodel distribution results for the PDA/K₂S₂O₈, PDA/AIBN, and SDG/AIBN systems indicate that the polymerization sites are both in oil droplets and in micelles (polymer aggregates). This mechanism is interpreted in terms of the formation of polymer aggregates, which is supported by the results of pyrene solubilization, pyrene fluorescence, surface tension, and pyrene excimer experiments. © 1993 John Wiley & Sons, Inc.     

Dynamic property and constitutive model of polyvinyl butaral material at high strain rates

The polyvinyl butaral (PVB) interlayer of automotive windshield plays an important role in the protection of both pedestrian and passenger, the mechanical property of PVB material should be in‐depth studied. In this article, the systematical uniaxial tensile experiments of PVB material under high strain rates are conducted, the strain rates range from 125.6 to 3768 s^?1. The results of experiments show that there exists a phenomenon of stress spurt caused by the stress hardening in the final stage of tension, and the strain rate exerts great influence on mechanical property of PVB material. Further, the data fitting basing on Mooney–Rivlin model is carried out, it is found that the fitting results are consistent with the experiment data, which means that the Mooney–Rivlin constitution model can describe the large deformation behavior of PVB material. At last, the rate‐dependent mechanical behavior of the PVB material is further investigated in this article. On the basis of the experiment results and Johnson–Cook model, a rate‐dependent constitutive model is proposed to describe the tensile mechanical property of PVB material under high strain rates. This work will be beneficial to the simulation and analysis of automotive collision safety and pedestrian safety protection, which are related to damage of automotive windshield. Copyright © 2014 John Wiley & Sons, Ltd.     

Sulfonated polyaniline/vanadate composite as anode material and its electrochemical property in microbial fuel cells on ocean floor

A unique sulfonated polyaniline/vanadate composite was synthesized and utilized as a composite anode in microbial fuel cells on ocean floor (BMFCs). X-ray diffraction (XRD) and thermogravimetric analysis (TGA) were employed to characterize its chemical composition and morphology. Wettability of the composite anodes decreases due to the addition of polytetrafluoroethylene (PTFE). The electrochemical behavior of the composite anodes was investigated by means of linear sweep voltammetry and Tafel plot measurem...     

Towards predicting the solubility of CO2 and N2 in different polymers using a quasi-SMILES based QSPR approach

The solubility of gases in various polymers plays an important role for the design of new polymeric materials. Quantitative structure–property relationship (QSPR) models were designed to predict the solubility of gases such as CO₂ and N₂ in polyethylene (PE), polypropylene (PP), polystyrene (PS), polyvinyl acetate (PVA) and poly (butylene succinate) (PBS) at different temperatures and pressures by using quasi-SMILES codes. The dataset of 315 systems was split randomly into training, calibration and validation sets; random split 1 led to 214 training (r² = 0.870 and RMSE = 0.019), 51 calibration (r² = 0.858 and RMSE = 0.020) and 50 validation (r² = 0.869 and RMSE = 0.017) sets. The suggested approach based on the quasi-SMILES, which are analogues of the traditional SMILES gives reasonable good predictions for solubility of CO₂ and N₂ in different polymers. The described methodology is universal for situations where the aim is to predict the response of an eclectic system upon a variety of physicochemical and/or biochemical conditions.     

Effect of matrix polymerization conditions on the structure and adsorption properties of porous polymers on the basis of divinylbenzene,acrylonitrile, and methyl methacrylate

A comparative study was carried out on the matrix polymerization of divinylbenzene, acrylonitrile, and methyl methacrylate in SBA-15 silica mesoporous molecular sieves. The occupancy of the matrix mesopores by the starting monomer, the medium, the polymerization temperature and time as well as the means of removing the exotemplate were all found to affect the spatial organization and porous structure of the polymer materials. Surplus occupancy of the mesopores by the monomer (1–1.5), polymerization in vacuum, and an alkaline method for matrix removal were found to be optimal. IR spectroscopy was used to find the conversion of the starting polymer by following the relative change in intensity of the vinyl group bands. Translated from Teoreticheskaya i éksperimental'naya Khimiya, Vol. 44, No. 6, pp. 371–375, November–December, 2008.     

纳米ZnO的制备及其光学性质的研究

采用均匀沉淀法，以尿素与硝酸锌反应制备纳米ZnO，通过TG-DTA、XRD、IR及TEM等手段对纳米粒子及中间体进行了表征，结果表明制得的纳米粒子粒度均匀，粒径分布窄。对纳米ZnO的发光特性研究表明，随焙烧温度升高，粒度的增大，可见绿色发射增强。同时对纳米ZnO与普通ZnO的发光性质进行了比较研究，指出纳米ZnO的绿色发光带有蓝移现象，这是由于纳米ZnO的量子尺寸效应引起的。BET测试表明，纳米ZnO的比表面为171．2m^2／g，有利于作催化剂。     

氧化镁表面修饰稀土催化材料的制备和气敏性能

本文采用湿化学过程的柠檬酸络合法、可控化学沉淀法和溶胶-凝胶法合成了纳米复合金属氧化物LaFeO3,利用各种分析方法对材料的物性和结构进行了分析和表征;并测定了材料对氧化性气体和还原性气体的气敏性能．研究结果表明LaFeO3复合物对NO2在350℃灵敏度高达127．83,特别通过添加MgO对基材进行表面修饰灵敏度提高到845．37,约添加前的70倍．本文还进一步考察了添加质和添加量对基材的结构和气敏性能的影响,并通过研究材料表面对气体的吸脱附性能和元素电子结合能的变化对敏感作用机制进行了深入分析和探讨．     

Preparation and characterization of a proficiency test material “Polish mushrooms” supported by the International Atomic Energy Agency (IAEA), Vienna

Mushroom reference material has been prepared and characterized for use in proficiency test exercises within the frame of an IAEA Interregional Technical Cooperation Project. Laboratories from 14 countries provided results for homogeneity testing and the assignment of property values. The contents of 11 elements have been assigned. The material was used for conducting a proficiency test in Poland and the results obtained by Polish laboratories are presented and discussed.     

高能量密度材料1,3,3-三硝基氮杂环丁烷研究进展

介绍了新型高能量密度材料1，3，3－三硝基氮杂环丁烷（TNAZ）的合成，物理性能，爆轰性能，安全性，热分解机理及其应用研究的进展， 并对其应用前景进行了展望。     

Synthesis and structure‐optoelectronic property relationships of a series of PPV and SFTV derived polymers

Engineering of the highest occupied molecular orbital and lowest unoccupied molecular orbitals through synthetic chemical structural modification has been the most widely used method to tuning optoelectronic properties in conjugated polymers. The electronic, thermal, optical, and physical properties can be tuned and exploited for optimization of optoelectronic devices. Through copolymerization of donor and acceptor type conjugated monomers, the frontier orbitals of four polymers were tailored. Through this synthetic engineering, the relationship between structural features, frontier orbital tailoring, and changes in optoelectronic and physical properties are discussed. Spectroscopic, thermal, and electronic analysis of the polymers indicated that polymers containing carbazole monomer moieties gave overall improved optoelectronic properties, but higher band gaps (2.61 and 2.18 eV) in comparison to their phenyl‐ based counterparts. This result is attributed to the higher electron density of the carbazole than the terephthaldicarboxaldehyde, and the possible deviation from planarity in the polymer main chain due to possible steric hindrance of the branched substituents. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2202–2213     

Mechanical property tuning of semicrystalline network polymers by controlling rates of crystallization and crosslinking

Semicrystalline network polymers were obtained by the Diels–Alder (DA) reaction of furyl‐telechelic poly(ε‐caprolactone) and tris(2‐maleimide ethyl)amine. Controlling the rates of crystallization and crosslinking reaction gave materials with various properties. Curing at a temperature much below T_m of poly(ε‐caprolactone), at which crystallization proceeded first followed by DA reaction, gave a hard and stiff material, whereas curing above T_m gave a soft and stretchable one. When crystallization and crosslinking were promoted simultaneously, tough and ductile materials were obtained. Structural analysis of the network polymers showed that the variation in the properties was derived from the difference in the crystallinity, crystallite size, and network structure. Therefore, materials with various mechanical properties, from soft to hard, could be obtained by simple thermal treatment. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Determination of 3-phenyl-4-hydroxy-6-chloropyridazine in groundwater using enrichment on porous organic polymers

Summary A method is described for the determination of 3-phenyl-4-hydroxy-6-chloropyridazine in potable water. The method is based on isolation and enrichment by passing the water sample through a column of macroreticular polymeric adsorbent resin, concentration, derivatisation with pentafluorobenzoyl chloride and GC measurement with a N-specific detector. The individual experiments for establishing the working conditions, especially the adsorption characteristics of different types of resin, are described. The highest enrichment efficiency is obtained with the methacrylate-type resin XAD7. In field-sampling experiments a 10cm column yields 57% recovery at 100mLmin^–1 flow rate, 0.3 ppb concentration level and 1 L sample volume. The method is completely documented; performance data are a detection limit of 0.07 g L^–1 and a mean recovery of 75% at the 0.3 ppb level.     

Crystal growth, thermal and optical studies on a semiorganic nonlinear optical material for blue-green laser generation

The semiorganic nonlinear optical material l-histidine bromide (l-HB) has been synthesized in aqueous solution and characterized by FT-IR, FT-Raman and FT-NMR spectroscopic techniques. The single crystals with dimensions 9mm x 4mm x 3mm were grown by slow evaporation techniques. The grown crystals were subjected to single crystal X-ray diffraction to determine the unit cell dimensions. The thermal stability of the grown crystal was analyzed by thermogravimetric (TG), differential thermal (DT) and differential scanning calorimetric (DSC) analyses. The UV-vis transmittance spectrum shows that it has a good optical transmittance in the entire visible region with the lower cutoff wavelength at 220 nm. The SHG conversion efficiency and laser damage threshold were measured using a Nd:YAG laser (1064 nm). The optical birefringence was measured in the visible region as a function of temperature in the range 30-150 degrees C by interference technique.     

含钼和钨的长链聚合物非线性光学性质的从头算研究

用RHF/Lan l2DZ及扩展基组计算了含金属钼和钨的一维长链聚合物[N(M(OR)3]n(M=Mo,R=CM e3,CM e2CF3;M=W,R=CM e3)的一阶超极化率。在短链时,钼聚合物的超极化率大于相应的钨聚合物,在长链时,钼聚合物的超极化率小于相应的钨聚合物。而三氟甲基取代的钼聚合物的超极化率大于甲基取代的钼聚合物。我们发现,在选取简化模型来计算非线性光学性质时,不能单纯考虑能量最优构型,还要考虑到与原体系在成键结构,特别是在电荷分布方面的相似性。例如本文中,若按量子化学计算惯例,将甲基CH3用H原子代替,氟代甲基CF3用F原子代替,优化的简化模型的电荷分布与真实分子的电荷分布明显不同。本文还讨论了含重金属一维长链聚合物的量子化学研究中的基组的选择。     

Fluorinated benzoxazines and the structure‐property relationship of resulting polybenzoxazines

Three fluorinated benzoxazines ( 14–16 ), which cannot be synthesized by the traditional one‐step approaches, were synthesized by a three‐step procedure using fluorinated aromatic diamines ( 2–4 ) as starting materials. The structures of the monomers were confirmed by ¹H NMR, IR, and high‐resolution mass spectra. The low dielectric thermosets, P( 14–16 ), were prepared by ring‐opening of ( 14–16 ). IR analysis was utilized to monitor the ring‐opening reaction of ( 14–16 ) and to propose the structures of P( 14–16 ). The thermal and dielectric properties of P( 14–16 ) were studied and compared with a nonfluorinated polybenzoxazine P( 13 ), which is derived form the ring‐opening of 2,2‐bis(4‐aminophenoxy)phenyl)propane ( 1 ). Besides, the structure–property relationship of the P( 13–16 ) is discussed. According to T_g measurement, the ortho‐positioned CF₃ substituents impart greater steric hindrance for ring‐opening of benzoxazines than CF₃ substituents of hexafluoropropane. Incorporating a biphenol F‐based benzoxazine, ( F‐a ), into fluorinated benzoxazines ( 15–16 ) can dilute the effect of ortho‐positioned CF₃ substituents on steric hindrance, leading to a higher crosslinking density and consequently a higher Tg. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4970–4983, 2008     

三个二羧酸配体配位聚合物的合成、结构表征和荧光性质

以羧酸配体 2,2''-(1,4-亚苯基双(亚苯基))双(硫二基)二苯甲酸(H₂L¹)和 2,2''-(2,3,5,6-四甲基-1,4-亚苯基)双(亚甲基）双(硫二基)二苯甲酸(H₂L²)分别与金属盐反应,通过溶剂热方法合成了 3个配位聚合物：{[Ni(L¹)(H₂O)₄]·2H₂O}_n (1)、[Zn(L¹)(DMA)₂]_n(2)和[Co(L²)(DMF)₂]_n (3),其中DMA=N,N-二甲基乙酰胺,DMF=N,N-二甲基甲酰胺。对配合物1~3进行了单晶X射线衍射、元素分析、红外光谱、热重分析、粉末X射线衍射和固体紫外可见光谱测试和表征。单晶X射线衍射表明：3个配合物均为一维锯齿形链状结构,并通过氢键作用形成三维骨架,且配体均表现为反式构象。此外,对配合物2固态荧光性质进行了研究。     

Studies on structure property relationship in a polymer–clay nanocomposite film based on (PAN)8LiClO4

A new combination of ionically conducting polymer–clay nanocomposites based on (PAN)₈LiClO₄ + x wt % montmorillonite (unmodified) clay has been prepared using the standard solution cast process. X-Ray diffraction (XRD) analysis reveals strong interaction of polymer salt complex (PS) with the montmorillonite matrix evidenced by changes in d₀₀₁ spacing of the clay and enhancement in the clay gallery width on composite formation possibly due to intercalation of polymer–salt complex into nanometric clay galleries. Evidences of such an interaction among polymer–ion–clay components of the composite matrix has also been observed in the Fourier transform infrared (FTIR) spectrum results. FTIR results clearly indicated cation (Li⁺) coordination at nitrile (CN) site of the polymer backbone along with appearance of a shoulder suggesting strong evidence of polymer–ion interaction. Addition of clay into the PS matrix has been observed to affect ion–ion interaction resulting from ion dissociation effect at low clay loading in the PNC films. Complex impedance spectroscopy (CIS) analysis has provided a response comprising of a semicircular arc followed by a spike attributed respectively, to the bulk conduction and electrode polarization at the interfaces. Electrical transport appears to be predominantly ionic (t_ion = 0.99) with significant improvement in the electrical conductivity and thermal stability properties. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 2577–2592, 2008     

三个二羧酸配体配位聚合物的合成、结构表征和荧光性质

以羧酸配体2,2''-（1,4-亚苯基双（亚甲基））双（硫二基）二苯甲酸（H₂L¹）和2,2''-（2,3,5,6-四甲基-1,4-亚苯基）双（亚甲基）双（硫二基）二苯甲酸（H₂L²）分别与金属盐反应,通过溶剂热方法合成了3个配位聚合物：{[Ni（L¹）（H₂O）₄]·2H₂O}_n （1）、[Zn（L¹）（DMA）₂]_n （2）和[Co（L²）（DMF）₂]_n （3）,其中DMA=N,N-二甲基乙酰胺,DMF=N,N-二甲基甲酰胺。对配合物1~3进行了单晶X射线衍射、元素分析、红外光谱、热重分析、粉末X射线衍射和固体紫外可见光谱测试和表征。单晶X射线衍射表明：3个配合物均为一维锯齿形链状结构,并通过氢键作用形成三维骨架,且配体均表现为反式构象。此外,对配合物2固态荧光性质进行了研究。