Application of S‐alkylsulfonium salts of aromatic sulfides as new thermal latent cationic initiators

The cationic initiation activity of derivatives of S‐methylsulfonium salts of dibenzothiophene ( 3a ), diphenyl sulfide ( 4a ), thioanisole ( 4d ), and tetrahydrothiophene ( 5 ) was evaluated in the polymerization of glycidyl phenyl ether ( 1 ). These initiators were soluble in 1 and capable of initiating the cationic polymerization of 1 on heating, with the exception of methyltetrahydrothiophenium tetrafluoroborate ( 5 ; in the range of room temperature to 160 °C). Among them, methyldiphenylsulfonium tetrafluoroborate ( 4a ) showed a moderate thermal latency that brought about the polymerization of 1 efficiently at 160 °C but not below 80 °C. S‐Alkylsulfonium salts of aromatic sulfides such as phenoxathiin ( 6a ) and thianthrene ( 6b ) also were evaluated for their activity in the cationic polymerization of 1 , from which the thermal latent behavior of these salts also was confirmed (i.e., there was no reaction at 60 °C for 3 h, but there was a high enough conversion at 140 °C). Furthermore, the catalytic activity of S‐alkylsulfonium derivatives was controllable by both the property of the substituents on the aromatic rings and the character of the alkyl groups on the sulfur atom. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 18–27, 2000     

Application of novel polymers with S‐alkylsulfonium salt moieties as alkylating agents and thermal latent cationic initiators

Sulfonium‐containing polymers prepared from dibenzothiophene and diphenyl sulfide were applied as both alkylating agents and latent initiators for the cationic polymerization of glycidyl phenyl ether. The alkylation of acetonitrile proceeded smoothly with poly(S‐n‐octyl‐2‐vinyldibenzothiophenium tetrafluoroborate) ( 4 ; 64 mol % octyldibenzothiophenium tetrafluoroborate unit) to give N‐(n‐octyl)acetamide in an excellent yield on the basis of the starting octyldibenzothiophenium tetrafluoroborate unit in 4 . The cationic polymerization of glycidyl phenyl ether was also carried out in the presence of poly(S‐methyl‐2‐vinyldibenzothiophenium tetrafluoroborate) or poly(S‐n‐octyl‐4‐vinyldiphenylsulfonium tetrafluoroborate) to confirm their moderate thermal latent activity. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3928–3933, 2001     

Cationic polymerization of glycidyl phenyl ether initiated by various arylsulfonium salts as new thermal latent cationic initiators

The cationic initiation activity of derivatives of S-methylsulfonium salts has been evaluated in the cationic polymerization of glycidyl phenyl ether ( 1 ). These initiators are soluble in 1 and capable of initiating the cationic polymerization of 1 on heating, except for methyltetrahydrothiophenium tetrafluoroborate ( 6 ) (r.t. −160°C). Among them, methyldiphenylsulfonium tetrafluoroborate ( 4 ) shows moderate thermal latency, that is the polymerization of 1 occurs efficiently at 160°C but not below 80°C.     

Photoinduced and thermally induced cationic polymerizations using S,S‐dialkyl‐S‐(3,5‐dimethylhydroxyphenyl)sulfonium salts

A study of the photoinitiated and thermally initiated cationic polymerizations of several monomer systems with S,S‐dialkyl‐S‐(3,5‐dimethylhydroxyphenyl)sulfonium salt (HPS) photoinitiators bearing different lengths of alkyl chains on the positively charged sulfur atom has been conducted. HPS photoinitiators are capable of photoinitiating the cationic polymerization of a wide variety of epoxy and vinyl ether monomers directly on irradiation with short‐wavelength UV light. Aryl ketone photosensitizers are effective in extending the spectral response of these photoinitiators into the long‐wavelength UV region. Kinetic studies with real‐time infrared spectroscopy show that HPS photoinitiators exhibit good efficiency in the polymerization of epoxide and vinyl ether monomers. Comparative studies also demonstrate that S,S‐dimethyl‐S‐(3,5‐dimethyl‐2‐hydroxyphenyl)sulfonium salts are more active photoinitiators than their isomeric S,S‐dimethyl‐S‐(3,5‐dimethyl‐4‐hydroxyphenyl)sulfonium salt counterparts. Both types of HPS photoinitiators display reversible photolysis as a result of facile termination reactions that take place between the growing chains ends with the photogenerated sulfur ylides. Preliminary studies have shown that HPS photoinitiators can also be employed as thermal initiators for the cationic ring‐opening polymerization of epoxides at moderate temperatures. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2570–2587, 2003     

Controlled radical polymerization of tert‐butyl acrylate at ambient temperature: Effect of initiator structure and synthesis of amphiphilic block copolymers

Controlled and very rapid ambient temperature polymerization of tert‐butyl acrylate (tBA) via atom transfer radical polymerization (ATRP) and single electron transfer living radical polymerization (SET‐LRP) conditions is reported. Two initiators, one that would generate a secondary radical and another that would generate a primary radical, upon activation, are used. A very active catalyst CuBr/Me₆TREN was found to initiate rapid polymerization whether it was the primary or the secondary initiator. The polymerization was well controlled and very rapid. The initiator that produces secondary initiating site is found to result in more rapid polymerization than the one that produces primary initiating site. To explore the possibility of rapid ambient temperature polymerization through the SET‐LRP mechanism, the polymerization was also carried out in the presence of DMSO. It was found that the polymerization was much faster compared to the bulk ATRP, without loss of control. Styrene was block copolymerized from PtBA macroinitiators and vice versa. In both the cases, block copolymers with controlled molecular weights were obtained. The tBA block of the polymer was selectively hydrolyzed to get amphiphilic block copolymers. This amphiphilic block copolymer was found to be useful in preparing stable cadmium sulfide (CdS) nanoparticulate dispersion. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and characterization of second‐generation S,S‐dialkyl‐S‐(dimethylhydroxyphenyl)sulfonium salt photoinitiators

A new, simplified method has been developed for the synthesis of S,S‐dialkyl‐S‐(dimethylhydroxyphenyl)sulfonium salt cationic photoinitiators. This novel method has successfully been used for the preparation of S,S‐dialkyl‐S‐(3,5‐dimethyl‐4‐hydroxyphenyl)sulfonium and S,S‐dialkyl‐S‐(3,5‐dimethyl‐2‐hydroxyphenyl)sulfonium salts showing a wide variation in the length and structure of the alkyl chains on the positively charged sulfur atom. These photoinitiators can also be prepared with a wide variety of different anions. The manipulation of the lengths of the alkyl chains permits the design of compatible photoinitiators for highly nonpolar monomers and oligomers such as epoxy‐functional silicones, epoxidized polybutadiene, and epoxidized vegetable oils. This article describes the synthesis and characterization of these photoinitiators. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2556–2569, 2003     

Lactide polymerization co‐initiated by carbohydrate esters and pyranoses

The polymerization of [S]‐lactide was accomplished using an initiating system comprising an alkyl zinc complex and a series of well defined carbohydrate co‐initiators derived from D ‐glucose, D ‐xylose, and 2‐deoxy‐D ‐ribose. The monosaccharide co‐initiators were aldonate esters and pyranoses, they were all prepared in high yield and had only a single alcohol co‐initiating group; the remaining carbohydrate hydroxyl functionalities were protected as acetyl, benzyl ether and isopropylidene acetal groups. The polymerizations were all well controlled, illustrated by the linear increase in poly(S‐lactide) M_n with percentage conversion of lactide, the increase in poly(S‐lactide) M_n with [lactide]₀‐[lactide]_t/[co‐initiator] and the narrow polydispersity indices of the polylactides. Thus, the novel initiating systems were used to produce poly(S‐lactides) end functionalized with a variety of different aldonate ester and pyranose groups and with degrees of polymerization from 10 to 250. The polyesters were fully characterized, including by NMR spectroscopy, size exclusion chromatography (SEC), matrix‐assisted laser deposorption/ionization (MALDI) mass spectrometry and by static water contact angle measurements. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4350–4362, 2008     

Studies on Electronic Effects in O‐, N‐ and S‐Chelated Ruthenium Olefin‐Metathesis Catalysts

A short overview on the structural design of the Hoveyda–Grubbs‐type ruthenium initiators chelated through oxygen, nitrogen or sulfur atoms is presented. Our aim was to compare and contrast O‐, N‐ and S‐chelated ruthenium complexes to better understand the impact of electron‐withdrawing and ‐donating substituents on the geometry and activity of the ruthenium complexes and to gain further insight into the trans–cis isomerisation process of the S‐chelated complexes. To evaluate the different effects of chelating heteroatoms and to probe electronic effects on sulfur‐ and nitrogen‐chelated latent catalysts, we synthesised a series of novel complexes. These catalysts were compared against two well‐known oxygen‐chelated initiators and a sulfoxide‐chelated complex. The structures of the new complexes have been determined by single‐crystal X‐ray diffraction and analysed to search for correlations between the structural features and activity. The replacement of the oxygen‐chelating atom by a sulfur or nitrogen atom resulted in catalysts that were inert at room temperature for typical ring‐closing metathesis (RCM) and cross‐metathesis reactions and showed catalytic activity only at higher temperatures. Furthermore, one nitrogen‐chelated initiator demonstrated thermo‐switchable behaviour in RCM reactions, similar to its sulfur‐chelated counterparts.     

Quantification of ATRP initiator density on polymer latex particles by fluorescence labeling technique using copper‐catalyzed azide‐alkyne cycloaddition

We developed a novel fluorescence labeling technique for quantification of surface densities of atom transfer radical polymerization (ATRP) initiators on polymer particles. The cationic P(St‐CPEM‐C₄DMAEMA) and anionic P(St‐CPEM) polymer latex particles carrying ATRP‐initiating chlorine groups were prepared by emulsifier‐free emulsion polymerization of styrene (St), 2‐(2‐chloropropionyloxy)ethyl methacrylate (CPEM), and N‐n‐butyl‐N,N‐dimethyl‐N‐(2‐methacryloyloxy)ethylammonium bromide (C₄DMAEMA). ATRP initiators on the surface of polymer particles were converted into azide groups by sodium azide, followed by fluorescent labeling with 5‐(N,N‐dimethylamino)‐N′‐(prop‐2‐yn‐1‐yl)naphthalene‐1‐sulfonamide (Dansyl‐alkyne) by copper‐catalyzed azide‐alkyne cycloaddition (CuAAC). The reaction time required for both azidation of ATRP‐initiating groups and successive fluorescence labeling of azide groups with Dansyl‐alkyne by CuAAC were investigated in detail by FTIR and fluorescence spectral measurement, respectively. The ATRP initiator densities on the cationic P(St‐CPEM‐C₄DMAEMA) and anionic P(St‐CPEM) particle surfaces were estimated to be 0.21 and 0.15 molecules nm^?2, respectively, which gave close agreement with values previously determined by a conductometric titration method. The fluorescence labeling through click chemistry proposed herein is a versatile technique to quantify the surface ATRP initiator density both on anionic and cationic polymer particles. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4042–4051     

Novel functional initiators for oxazoline polymerization

The initiating behavior of the functional tosylates 1 – 4 and triflates 5 and 6 for the cationic ring‐opening polymerization of 2‐methyl‐1,3‐oxazoline was investigated. The emphasis was directed at tosylates and triflates with 2,2‐dimethyl‐1,3‐dioxolane‐, 2,3‐epoxypropyl‐, 2,3‐didodecanoyl‐glycerol‐, and cholest‐5‐en‐moieties that allow the construction of amphiphilic polyoxazoline conjugates. The tosylates were prepared by a simple reaction of the corresponding alcohols with p‐toluenesulfonyl chloride, whereas the preparation of the corresponding triflates required low temperature and the use of 2,6‐di‐tert‐butylpyridine as a sterically hindered base. Among the initiators tested, 2,2‐dimethyl‐(4‐trifluoromethanesulfonyloxymethyl)‐1,3‐dioxolane 6 gave the best results in respect to molecular weight and polydispersity. Starting from the corresponding functional oxazoline polymers obtained with 6 as an initiator, amphiphilic lipid‐polyoxazoline conjugates with a diacylglycerol backbone could be prepared. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2821–2831, 2001     

Alkyl chloride initiators for SET‐LRP of methyl acrylate

Single‐electron transfer living radical polymerization (SET‐LRP) proceeds by an outer‐sphere single‐electron transfer mechanism that induces a heterolytic bond cleavage of the initiating and propagating R‐X (where X = Cl, Br, and I) species. Therefore, unlike the homolytic bond cleavage mechanism claimed for ATRP, SET‐LRP is expected to show a small dependence of the nature of the halide group on the apparent rate constant of activation. This means the R‐X with X = Cl, Br, and I must all be efficient initiators for SET‐LRP and no chain transfer must be observed in the case of initiators with X = Br and I. Here, we report the SET‐LRP of methyl acrylate initiated with the alkyl chlorides methyl‐2‐chloropropionate (MCP) and chloroform (CHCl₃) and catalyzed by Cu(0)/Me₆‐TREN/CuCl₂ in DMSO at 25 °C. A combination of kinetic and structural analysis was used to elucidate the MCP and CHCl₃ initiating behavior under SET‐LRP conditions, and to demonstrate the very small dependence of the SET‐LRP apparent rate constant of propagation on X while providing polymers with well defined architecture. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4917–4926, 2008     

Effect of ligand on the synthesis of star polymers by resorcinarene‐based ATRP initiators

The effect of the steric hindrance on the initiating properties of two multifunctional resorcinarene‐based initiators in atom transfer radical polymerization (ATRP) was studied by using Cu(I)‐complexes of three multidentate amine ligands in the polymerization of tert‐butyl acrylate and methyl methacrylate. These ligands are less sterically hindered and have higher activities in the catalysis of ATRP of (meth)acrylates than 2,2′‐bipyridine. The polymerizations were faster and more controlled than with the 2,2′‐bipyridyl catalyst, but the tendency for bimolecular coupling increased. Even though the initiator was octafunctional, the resulting star polymers had only four arms. This indicates that the steric hindrance arising from the conformations of the initiators determines the structure of the polymer, but the ligand noticeably affects the controllability of the polymerization © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3349–3358, 2005     

Chiral arylnickel complexes as highly active initiators for screw‐sense selective living polymerization of 1,2‐diisocyanobenzenes

Optically active chiral organonickel complexes served as efficient chiral initiators for living aromatizing polymerization of 1,2‐diisocyanobenzene derivatives, which afford optically active helical poly(quinoxaline‐2,3‐diyl)s up to 84% s.e. (screw‐sense excess). In comparison with asymmetric polymerization with the corresponding organopalladium initiators, the nickel initiators show a much greater polymerization rate, while the selectivity remains high. The organonickel initiators can be generated in situ from nickel(0) precursors with the corresponding enantiopure (S,S)‐2‐(4,5‐diphenylimidazolin‐2‐yl)phenyl chloride, leading to the convenient synthesis of highly stereo‐controlled poly(quinoxaline‐2,3‐diyl)s. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 898–904, 2010     

Kinetic study of free‐radical polymerization photoinitiated by cyanine‐borate salts. II.

A series of cyanine butyltriphenylborate salts were prepared and tested as initiators of free‐radical polymerization photoinitiated via a photoinduced electron‐transfer process. For the majority of the tested series, the highest rate of photoinitiated free‐radical polymerization was observed when sec‐butyl radicals were formed. Essentially, there was no influence of the quantum yield of the free‐radical formation on the rate of the free‐radical polymerization initiated by the cyanine‐borate salts. The experimental data revealed that the relationship between the rate of polymerization and the free energy change for the electron transfer displayed typical Marcus region kinetic behavior. The photoreduction of the cyanine butyltriphenylborate salts produced colorless products. The efficiency of the bleached‐dye formation had no effect on the overall efficiency of photoinitiated polymerization. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2365–2374, 2000     

ATRP of methyl methacrylate initiated with a bifunctional initiator bearing bromomethyl functional groups: Synthesis of the block and graft copolymers

This article reports the synthesis of the block and graft copolymers using peroxygen‐containing poly(methyl methacrylate) (poly‐MMA) as a macroinitiator that was prepared from the atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) in the presence of bis(4,4′‐bromomethyl benzoyl peroxide) (BBP). The effects of reaction temperatures on the ATRP system were studied in detail. Kinetic studies were carried out to investigate controlled ATRP for BBP/CuBr/bpy initiating system with MMA at 40 °C and free radical polymerization of styrene (S) at 80 °C. The plots of ln ([M_o]/[M_t]) versus reaction time are linear, corresponding to first‐order kinetics. Poly‐MMA initiators were used in the bulk polymerization of S to obtain poly (MMA‐b‐S) block copolymers. Poly‐MMA initiators containing undecomposed peroygen groups were used for the graft copolymerization of polybutadiene (PBd) and natural rubber (RSS‐3) to obtain crosslinked poly (MMA‐g‐PBd) and poly(MMA‐g‐RSS‐3) graft copolymers. Swelling ratio values (q_v) of the graft copolymers in CHCl₃ were calculated. The characterizations of the polymers were achieved by Fourier‐transform infrared spectroscopy (FTIR), ¹H‐nuclear magnetic resonance (¹H NMR), gel‐permeation chromatography (GPC), differential scanning calorimetry (DSC), thermogravimetric analysis, scanning electron microscopy (SEM), transmission electron microscopy (TEM), atomic force microscopy (AFM), and the fractional precipitation (γ) techniques. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1364–1373, 2010     

Grafting of methacrylates and styrene on to polystyrene backbone via a “grafting from” ATRP process at ambient temperature

Well defined graft copolymers are prepared by “grafting from” atom transfer radical polymerization (ATRP) at room temperature (30 °C). The experiments were aimed at grafting methacrylates and styrene at latent initiating sites of polystyrene. For this purpose, the benzylic hydrogen in polystyrene was subjected to allylic bromination with N‐bromosuccinimide and azobisisobutrylnitirle to generate tertiary bromide ATRP initiating sites (Br? C? PS). The use of Br? C? PS with lesser mol % of bromide initiating groups results in better control and successful graft copolymerization. This was used to synthesize a series of new graft copolymers such as PS‐g‐PBnMA, PS‐g‐PBMA, PS‐g‐GMA, and PS‐g‐(PMMA‐b‐PtBA) catalyzed by CuBr/PMDETA system, in bulk, at room temperature. The polymers are characterized by GPC, NMR, FTIR, TEM, and TGA. Graft copolymerization followed by block polymerization enabled the synthesis of highly branched polymer brush, in which the grafting density can be adjusted by appropriate choice of bromide concentration in the polystyrene. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3818–3832, 2007     

Synthesis of novel poly(meth)acrylates containing tetracyanocyclopropyl groups as piezoelectric chromophores and their properties

p‐(2,2,3,3‐Tetracyanocyclopropyl)phenoxyethyl acrylate ( 5a ) and p‐(2,2,3‐tetracyanocyclopropyl)phenoxyethyl methacrylate ( 5b ) were prepared by the reactions of bromomalononitrile with p‐(2‐acryloyloxyethoxy)benzylidenemalononitrile and p‐(2‐methacryloyloxyethoxy)benzylidenemalononitrile, respectively. Monomers 5a and 5b were polymerized with free‐radical initiators to obtain polymers with multicyanocyclopropane functionalities in the pendant group. The resulting polymers were soluble in acetone, and the inherent viscosities were 0.25–0.30 dL/g. Solution‐cast films showed thermal stability up to 300 °C with glass‐transition temperatures of 140–156 °C. The dipole moments of 5a and 5b , calculated by the atom superposition and electron delocalization molecular orbital method, were 7.58–7.30 D. Piezoelectric coefficients (d₃₁) of the poled polymer films were 1.8–1.9 pC/N, acceptable values for piezoelectric device applications. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 379–384, 2002     

Facile one‐pot method of initiator fixation for surface‐initiated atom transfer radical polymerization on carbon hard spheres

An efficient and novel one‐pot process is developed to immobilize the atom transfer radical polymerization (ATRP) initiators onto the surface of fully pyrolyzed carbon hard spheres (CHSs) via a radical trapping process from the in situ thermal decomposition of bis(bromomethylbenzoyl)peroxide. The CHSs do not require any additional preparative treatment prior to the initiator immobilization. Styrene and methyl methacrylate are polymerized onto initiator‐immobilized CHSs by surface‐initiated atomic transfer radical polymerization (SI‐ATRP). Samples are characterized using Fourier transform infrared, thermogravimetric analysis, scanning electron microscopy, and transmission electron microscopy. These methods of characterization confirmed that all the CHSs are coated with a uniform layer of grafted polymer. This efficient, one‐pot immobilization of ATRP‐initiators represents an exceptionally simple route for the rapid preparation of various polymer‐coated carbon‐based nanomaterials using SI‐ATRP. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3314–3322     

Styrylpyridinium borate salts as dye photoinitiators of free‐radical polymerization

Styrylpyridinium borate salts photoinitiate free‐radical polymerization. The rate of photopolymerization depends on the ΔG^o of electron transfer between a borate anion and a styrypyridinium cation. This latter value was estimated for a series of styrylpyridinium borate salts, and the relationship between the rate of polymerization and the free energy of activation gives the dependence predicted by the classical theory of electron transfer. This relation was independently observed for the two series of styrylpyridinium borate salts tested—one for the photoredox pair with an iodine atom and the second without. Styrylpyridinium borate salts were stable at ambient temperature in the formulations prepared for the photopolymerization experiments. Photopolymerization initiated by the photoredox pairs tested proceeded by the conventional mechanism in which bimolecular termination occurs by a reaction between two macroradicals. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1433–1440, 2002     

Synthesis of phosphate end‐functional polymers and application to thermally latent polymeric initiators

Novel phosphates, O‐p‐(hydroxymethyl)benzyl O,O‐diethyl phosphate ( 1 ) and O‐(2‐bromoisobutyryloxymethyl)benzyl O,O‐diethyl phosphate ( 2 ) were synthesized by the reaction of diethyl phosphorochloridate with 1,4‐benzenedimethanol and the successive reaction with 2‐bromoisobutyryl bromide in the presence of triethylamine and submitted to the polymerization of ?‐caprolactone and methyl methacrylate as the initiators. They afforded phosphate end‐functional poly(?‐caprolactone) and poly(methyl methacrylate) with controlled molecular weights and polydispersity ratios by living ring‐opening polymerization and samarium‐induced polymerization. The polymerization of glycidyl phenyl ether (GPE) was carried out with the phosphate end‐functional polymers as the latent polymeric initiators in the presence of ZnCl₂. The polymerization of GPE did not proceed below 90 °C, but it rapidly proceeded to afford poly(GPE) above the temperature. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3832–3840, 2001